Hyperion Analyzer - unable to expand user list

I'm using Hyperion Analyzer 7.0 but unable to expand the "User" folder under the Admin web client tool. I get an hour glass and the then the hour glass disappears but nothing gets displayed even after waiting for 5 mins. I tried all possible options like clicked on (+) symbol, double clicked on the folder, logged in with other admin user accounts. I' m able to expand the other folders though.
When I click on New User it does not show up anything.

Hi Sean,
Actually we have already a Active Directory with username "ServiceBEA" in our windows server. So i used this "ServiceBEA" as UserName Attribute in weblogic console while creating a Active Directory Authenticator.
You mean to say that we should go for "sAMAccountName" or what? If that is the case then i have also tested with following values, but still no luck.
UserName Attribute : sAMAccountName
Principal : ServiceBEA
Host : xxxxxx
User Search Scope : subtree
Group From Name Filter : (&(sAMAccountName=%g)(objectclass=group))
Credential : xxxxxx
Confirm Credential : xxxxxx
User From Name Filter : (&(sAMAccountName=%u)(objectclass=user))
Static Group Name Attribute : sAMAccountName
User Base DN : values provided as per requirement
Port : 389
User Object Class : user
Use Retrieved User Name as Principal : checked
Group Base DN : same values as per User Base DN
Static Group Object Class : group
Group Membership Searching : unlimited
Max Group Membership Search Level : 0
Please advise what to be place in case of User Name Attribute.
Any help is highly appreciated.
Thanks in advance !

Similar Messages

Users are unable to expand a list when a filter is applied in SharePoint 2010 site

There are set of users facing issues while filtering the contents in the SP2010 site since the migration to SharePoint 2010. It is no longer possible to expand a list when a filter is applied.
When open a fresh browser the filter does work, but if we perform an edit or save in the list, the filtering option disappears for the entire site.
Then we need to forcefully close all the active browsers and start a new browser to see the list. Have checked with different browsers and different machines ended up with the same issue. Could you please suggest a workaround for the problem? Thank you.

Check if On alternate access mappings might be causing this issue

Unable to find user list in Active Directory Authenticator

Hi all,
I am using weblogic 10.3 and want to configure ActiveDirectory Authenticator for my weblogic application. We have one managed srever under admin server . I have configured a Active Directory Authenticator named "ADAuthenticator" and made following changes as per the below values:
I set the control flag to "OPTIONAL" .
Security Realms-->myrealm-->Providers-->ADAuthenticator-->Provider Specific
UserName Attribute : ServiceBEA
Principal : ServiceBEA
Host : xxxxxx
User Search Scope : subtree
Group From Name Filter : (&(ServiceBEA=%g)(objectclass=group))
Credential : xxxxxx
Confirm Credential : xxxxxx
User From Name Filter : (&(ServiceBEA=%u)(objectclass=user))
Static Group Name Attribute : ServiceBEA
User Base DN : values provided as per requirement
Port : 389
User Object Class : user
Use Retrieved User Name as Principal : checked
Group Base DN : same values as per User Base DN
Static Group Object Class : group
Group Membership Searching : unlimited
Max Group Membership Search Level : 0
These are my AD settings. After doing this i click on save and then activate changes and then restarted the admin server.
But the problem is when i login to weblogic console to check the user list under "User and Group" i am unble to find any Active Directory users.
I don't know where i made the mistake. Can some make me out of this trouble.
Any help is highly appreciated.
Thanks in advance !

Hi Sean,
Actually we have already a Active Directory with username "ServiceBEA" in our windows server. So i used this "ServiceBEA" as UserName Attribute in weblogic console while creating a Active Directory Authenticator.
You mean to say that we should go for "sAMAccountName" or what? If that is the case then i have also tested with following values, but still no luck.
UserName Attribute : sAMAccountName
Principal : ServiceBEA
Host : xxxxxx
User Search Scope : subtree
Group From Name Filter : (&(sAMAccountName=%g)(objectclass=group))
Credential : xxxxxx
Confirm Credential : xxxxxx
User From Name Filter : (&(sAMAccountName=%u)(objectclass=user))
Static Group Name Attribute : sAMAccountName
User Base DN : values provided as per requirement
Port : 389
User Object Class : user
Use Retrieved User Name as Principal : checked
Group Base DN : same values as per User Base DN
Static Group Object Class : group
Group Membership Searching : unlimited
Max Group Membership Search Level : 0
Please advise what to be place in case of User Name Attribute.
Any help is highly appreciated.
Thanks in advance !

Migrating Hyperion Analyzer 7 to Hyperio 931

Please advice on the process, if I were to do a migration wherein an Hyperion Analyzer *7* (webanaylsis/essbase/users) will be added to an existing Hyperion 931 enviroment.
Thanks in advance
Amit

Hi,
If both environments are 931 and it is user provisioning you want to migrate, you are best using CSSImportExport utility that is in \hyperion\common\utilities
Though that will not migrate the provisioning of reports, that area has never been the best.
Cheers
John
http://john-goodwin.blogspot.com/

Hyperin analyzer unable to list the databases from Essbase

Hi ,
We are using Hyperion Analyzer 7.2 , I have an issue while connecting to Essbase databases.
As mentioned int he document I went Administrator tools go to Repostiory tab , File-> New -> database connection-> Essbase
Now I gave the credentials of server username and password... and hit next here I am getting a dialog
""UNABLE TO RETRIEVE LIST OF AVAILABALE DATABASES"" When I went to details of the error
null nested exception is java.lang.noclassDefFoundError
Please let me know if anyone face this error.
Thank You!!!

Hi
Regarding to error occurred while retrieving list of databases, please make sure:
1) Make sure Essbase server is up running
2) Make sure Essbase Runtime Client is installed in the Application Server machine
3) go to System Environment variables make sure:
PATH is pointing to x:\hyperion\common\ADM\7.2.0\Essbase\7.2.0\bin
If Tomcat and Websphere:
4) Go Analyzer directory and search for Analyzer_Startup.bat
4.1) In Analyzer_Startup.bat, make sure the PATH is set to x:\hyperion\common\ADM\7.2.0\Essbase\7.2.0\bin
4.2) restart system
If Weblogic:
4) Go to Analyzer directory and search for Analyzer_env.bat
4.1) In Analyzer_env.bat, make sure the PATH is set to x:\hyperion\common\ADM\7.2.0\Essbase\7.2.0\
4.2) Go to Bea directory and search for InstallSvc.cmd or InstallService.cmd
4.3) in InstallSvc.cmd, look for a line:
call "%WL_Home%\common\bin\CommEnv.cmd"
After this line, make sure you have a line to call analyzer_env.bat
call "x:\Hyperion\Analyzer\analyzer.env.bat"
4.4) restart weblogic
5) Try to connect to Essbase again
Regards,
Sudhir

How you import essbase users list into Hyperion reports?

How you import essbase users list into Hyperion reports?

I don't think this is a standard feature of Hyperion Reports.
Why do you need to see all the users in a report. Administrators can always query EAS, Shared Services or MaxL.
Brian Chow

Unable to expand table (or 'any' object) node - permissions issue?

I am the dba for a database and hence have access to the system user. When I connect to the db through SQL Developer, I can expand the table node under any user and list tables. As I can with any object node.
I now want to create an admin user that has restricted capabilities, one of which will be to view objects, such as tables etc..
(I will ultimately do this via a role to allow multiple users to have the admin capabilities, but for now have just created an admin_user userid).
However, when I connect to the database using this admin_user userid, I am unable to expand any object node.
I have played with different permissions, granting 'select any dictionary', 'select_catalog_role', 'select on dba_tables' but the user still can not view any objects via the appropriate node. eg. attempting to go to Other Users - username - Tables just shows nothing. (There are no filters).
However the admin_user can run a SQL command to view the tables. eg. Select * from dba_tables, will list all tables for all users within the database. So they DO appear to have the appropriate access.
So why can't they see the tables in the tables node?
Is there some piece of configuration within SQL Developer itself that I have overlooked?
Cheers

I am the dba for a database and hence have access to the system user. When I connect to the db through SQL Developer, I can expand the table node under any user and list tables. As I can with any object node.
I now want to create an admin user that has restricted capabilities, one of which will be to view objects, such as tables etc..
(I will ultimately do this via a role to allow multiple users to have the admin capabilities, but for now have just created an admin_user userid).
However, when I connect to the database using this admin_user userid, I am unable to expand any object node.
I have played with different permissions, granting 'select any dictionary', 'select_catalog_role', 'select on dba_tables' but the user still can not view any objects via the appropriate node. eg. attempting to go to Other Users - username - Tables just shows nothing. (There are no filters).
However the admin_user can run a SQL command to view the tables. eg. Select * from dba_tables, will list all tables for all users within the database. So they DO appear to have the appropriate access.
So why can't they see the tables in the tables node?
Is there some piece of configuration within SQL Developer itself that I have overlooked?
Cheers

Analyzer 6.1 Combo-box list sort

Does anyone know of an easy way to sort lists in combo-boxes (or check-boxes, etc...)? Thank you for your help.

You may want to try the following.Make sure:1) you have sourced out anlayzer.sh script2) Use the set command to set the path and ICU_DATA3) Turn On ADM tracingessbase connection issue\unable to connect to essbase from analyzer 6.1Note____To Resolve:1. Verify the Essbase installation\API directories are on the machine.2. Verify the following "strings" have been appended to their correspondingEnvironment Variable for Analyzer and Essbase:(Examples below)For SOLARIS:Variable: STRING:ARBORPATH /opt/olap81PATH $ARBORPATH/bin:$PATHLD_LIBRARY_PATH $ARBORPATH/dlls:$ARBORPATH/bin:$LD_LIBRARY_PATHPATH /opt/hyperion/analyzer/adm/bin/solaris:$PATHLD_LIBRARY_PATH /opt/hyperion/analyzer/adm/bin/solaris:$LD_LIBRARY_PATHICU_DATA /opt/hyperion/analyzer/adm/bin/solaris/HssEssDriver/I had the similar error message and adding the above to the path resolved the issue.Regards,Peter Tupker

Cannot expand distribution list if message moderation is enabled

Hi all,
Trying to find a solution to resolve a problem(or it is a bug?) in Exchange 2010 with Outlook 2010.
Users in the company often expand distribution list. After migration from Exchange 2003 to Exchange 2010, i found that if i enable message moderation on distribution list, they cannot expand the list anymore and Outlook said that unable to expand public
group.
If i remove moderation on the distribution list, they can expand without problem.
Someone have a solution to this?
Thank you very much.

Hi John,
My Exchange 2010 Version: 14.01.0218.013
It's on all DG who has moderation enabled.
No expansion server is set. (I tried to define one but still have the same error message in Outlook).
I dont understand.
The expansion server is a transport level feature, so it should not affect Outlook.
Is Outlook in online or cache mode?
Does it happen with both modes?
Is a manager configured? Does it fail no matter what moderation option is chosen?

Open Directory: "Unable to load replica list"

I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the Open Directory service was shut off when I opened the server software. I tried to turn it on but got a message saying "Unable to load replica list". I updated the software to the latest 3.1 but are still having the same issue. I never had any replica list, I only had a standard one from the start, but it seems I can't do anyhing there now.
LDAP log:
Mar 21 22:48:38 xxYY.com slapd[172]: @(#) $OpenLDAP: slapd 2.4.28 (Nov 12 2013 12:02:47) $
[email protected]:/private/var/tmp/OpenLDAP/OpenLDAP-491.1~1/servers/slapd
Mar 21 22:48:38 xxYY.com.com slapd[172]: daemon: SLAP_SOCK_INIT: dtblsize=8192
Mar 21 22:48:39 xxYY.com.com slapd[172]: TLS: found identity in keychain using identity preference.
Mar 21 22:48:42 xxYY.com.com slapd[172]: slap_add_listener: opened additional listener 'ldaps:///'
Mar 21 22:48:42 xxYY.com.com slapd[172]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Mar 21 22:48:44 xxYY.com.com slapd[172]: slapd starting
Mar 21 22:48:44 xxYY.com.com slapd[172]: daemon: posting com.apple.slapd.startup notification
Mar 21 22:48:54 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_del id failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:48:54 xxYY.com.com slapd[172]: conn=1022 op=3: attribute "entryCSN" index delete failure
Mar 21 22:50:02 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:50:02 xxYY.com.com slapd[172]: conn=1042 op=3: attribute "entryCSN" index delete failure
I don't understand any of this other than the obvious failure words. Can anyone understand this and help me here?

This procedure is a diagnostic test. It makes no changes to your data. If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo /usr/libexec/slapd -Tt | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Unable to expand child links in ALV Tree

Hi,
I have written the following code for ALV Tree using function modules.
REPORT ZSID_ALV_TREE.
type pool declarations for tree
TYPE-POOLS : fibs,stree.
tables: ekko.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko     TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      it_ekpo     TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      it_emptytab TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko     TYPE t_ekko,
      wa_ekpo     TYPE t_ekko.
DATA:w_repid type sy-cprog.
*Data declaration for additional node information
DATA : t_node TYPE snodetext.
*Internal table and wa decl for nodes
DATA : it_node LIKE TABLE OF t_node INITIAL SIZE 0,
       wa_node LIKE t_node.
*Start of selection event
START-OF-SELECTION.
*Select the data for tree
PERFORM fetch_data.
*Build the hierarchy for tree
PERFORM build_hierarchy.
*Build Tree for display
PERFORM build_tree.
*& Form fetch_data
text
--> p1 text
<-- p2 text
FORM fetch_data .
SELECT ebeln
up to 10 rows
    FROM ekko
    INTO corresponding fields of TABLE it_ekko .
loop at it_ekko into wa_ekko.
    SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
      FROM ekpo
      appending TABLE it_ekpo
     where ebeln eq wa_ekko-ebeln.
endloop.
endform.
*& Form build_hierarchy
text
--> p1 text
<-- p2 text
FORM build_hierarchy .
*Building the nodes and hierarchy for tree
CLEAR : it_node[], wa_node.
wa_node-type = 'T'.
wa_node-name = 'Product Hierarchy Level'.
wa_node-tlevel = '01'.
wa_node-nlength = '35'.
wa_node-color = '4'.
wa_node-text = 'Test'.
wa_node-tlength ='20'.
wa_node-tcolor = 3.
APPEND wa_node TO it_node.
CLEAR wa_node.
loop at it_ekpo into wa_ekpo.
wa_node-type = 'P'.
wa_node-name = 'Purchasing Doc'.
wa_node-tlevel = '02'.
wa_node-nlength = '25'.
wa_node-color = '4'.
wa_node-text = wa_ekpo-ebeln.
wa_node-tlength ='20'.
wa_node-tcolor = 3.
APPEND wa_node TO it_node.
CLEAR wa_node.
*Filling the values of internal table into tree
wa_node-type = 'P'.
wa_node-name = 'Material No'.
wa_node-tlevel = '03'.
wa_node-nlength = '20'.
wa_node-color = '1'.
wa_node-text = wa_ekpo-matnr.
wa_node-tlength ='20'.
wa_node-tcolor = 4.
APPEND wa_node TO it_node.
CLEAR wa_node.
ENDLOOP.
ENDFORM. " build_hierarchy
*& Form build_tree
text
--> p1 text
<-- p2 text
FORM build_tree .
*Fm for constructing the tree
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
nodetab = it_node.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
w_repid = SY-CPROG.
*FM for displaying the tree
                CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
                 EXPORTING
                   CALLBACK_PROGRAM                = w_repid
                  CALLBACK_USER_COMMAND           = 'USER1_COMMAND'
                  CALLBACK_TEXT_DISPLAY           =
                  CALLBACK_MOREINFO_DISPLAY       =
                  CALLBACK_COLOR_DISPLAY          =
                  CALLBACK_TOP_OF_PAGE            =
                  CALLBACK_GUI_STATUS             =
                  CALLBACK_CONTEXT_MENU           =
                  STATUS                          = 'IMPLICIT'
                   CHECK_DUPLICATE_NAME            = '0'
                   COLOR_OF_NODE                   = '4'
                   COLOR_OF_MARK                   = '3'
                   COLOR_OF_LINK                   = '1'
                   COLOR_OF_MATCH                  = '5'
                   LOWER_CASE_SENSITIVE            = 'X'
                   MODIFICATION_LOG                = 'X'
                   NODE_LENGTH                     = 40
                   TEXT_LENGTH                     = 75
                   TEXT_LENGTH1                    = 0
                   TEXT_LENGTH2                    = 0
                   RETURN_MARKED_SUBTREE           = 'X'
                   SCREEN_START_COLUMN             = 0
                   SCREEN_START_LINE               = 0
                   SCREEN_END_COLUMN               = 0
                   SCREEN_END_LINE                 = 0
                   SUPPRESS_NODE_OUTPUT            = 'X'
                  LAYOUT_MODE                     = ' '
                   USE_CONTROL                     = 'L'.
                IMPORTING
                  F15                             =
ENDFORM. " build_tree
FORM USER1_COMMAND TABLES node        STRUCTURE seucomm
                             USING command
                         CHANGING value(exit)
                                 VALUE(LIST_REFRESH).
write 'Hi'.
endform.
But I have a problem
1. I can expand the child links in tree structure when I comment the exporting parameter CALLBACK_USER_COMMAND in the function Module 'RS_TREE_LIST_DISPLAY'.
2 But when i uncomment the exporting parameter I am unable to expand the child links in output.
Please let me know if i have missed something in the code.
Useful answers will be rewarded
Regards,
Siddharth

Hi Sidhhart,
Check out this prog.
REPORT Z_KULDEEP_ALV_HIERARCHY
message-id zord
line-size 270.
Tables:
Vbap,
Vbak.
*& PROGRAM VARIABLES
type-pools slis.
*& INTERNAL TABLES & STRUCTURES
data:
begin of t_header occurs 0,
    EXPCOL type c,
    vbeln type vbak-vbeln,
    audat type vbak-audat,
    vkorg type vbak-vkorg,
    vtweg type vbak-vtweg,
    spart type vbak-spart,
end of t_header,
begin of t_item occurs 0,
    vbeln type vbap-vbeln,
    posnr type vbap-posnr,
    matnr type vbap-matnr,
    arktx type vbap-arktx,
    pstyv type vbap-pstyv,
end of t_item,
t_fieldcat type standard table of slis_fieldcat_alv with header line,
t_event    type standard table of slis_alv_event with header line,
x_keyinfo type slis_keyinfo_alv,
x_layout   type slis_layout_alv,
x_variant like disvariant.
*& GLOBAL VARIABLES
data:
    g_repid    type sy-repid,
    g_formname type slis_formname value 'TOP_OF_PAGE'.
*& SELECTION SCREEN                                                    *
selection-screen begin of block a with frame title text-000.
Select-options : s_date for vbak-audat obligatory.
   p_date type vbak-audat.
selection-screen end of block a.
*& INITIALIZATION                                                      *
initialization.
clear : g_repid,t_header,t_item.
refresh : t_header,t_item.
g_repid = sy-repid.
*& AT SELECTION-SCREEN                                                 *
at selection-screen.
if s_date-high > sy-datum.
    message e001.
endif.
start-of-selection.
select vbeln audat vkorg vtweg spart from vbak
into corresponding fields of table t_header
where audat in s_date.
select vbeln posnr matnr arktx pstyv from vbap
into table t_item
for all entries in t_header
where vbeln = t_header-vbeln.
end-of-selection.
perform sub_display_alv.
*&      Form sub_display_alv
      text
--> p1        text
<-- p2        text
form sub_display_alv.
*column 1
perform sub_populate_fieldcatalog using:
      'VBELN'                             " field name
      'T_HEADER'                          " table name
      'ORDER'                             " column heading
      '8'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 2
    perform sub_populate_fieldcatalog using:
      'AUDAT'                             " field name
      'T_HEADER'                          " table name
      'ORDERDATE'                         " column heading
      '10'                                " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 3
perform sub_populate_fieldcatalog using:
      'VKORG'                             " field name
      'T_HEADER'                          " table name
      'SALES ORG'                         " column heading
      '6'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 4
perform sub_populate_fieldcatalog using:
      'VTWEG'                             " field name
      'T_HEADER'                          " table name
      'DIVISION'                          " column heading
      '2'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 5
perform sub_populate_fieldcatalog using:
      'SPART'                             " field name
      'T_HEADER'                          " table name
      'CHANNEL'                             " column heading
      '4'                                " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 6
perform sub_populate_fieldcatalog using:
     'vbeln'                             " field name
     'T_item'                            " table name
     'Order'                             " column heading
     '8'                                 " column width
     ' '                                 " fix column?
     ' '                                 " key
     ' '                                 " no display
     ' '                                 " sum this column
     'X'                                 " do not sum
     ' '                                 " input allowed?
     ' '                                 " currenct type field name
     ' '                                 " data type
     'X'.                                 " hotspot.
*column 7
perform sub_populate_fieldcatalog using:
      'POSNR'                             " field name
      'T_ITEM'                            " table name
      'SALES DOC.ITEM'                    " column heading
      '8'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 8
perform sub_populate_fieldcatalog using:
      'MATNR'                             " field name
      'T_ITEM'                            " table name
      'MATERIAL'                          " column heading
      '8'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 9
perform sub_populate_fieldcatalog using:
      'ARKTX'                             " field name
      'T_ITEM'                            " table name
      'SALES ORDER ITEM'                  " column heading
      '8'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                 " hotspot.
*column 10
perform sub_populate_fieldcatalog using:
      'PSTYV'                             " field name
      'T_ITEM'                            " table name
      'ITEM CATEGORY'                     " column heading
      '8'                                 " column width
      ' '                                 " fix column?
      ' '                                 " key
      ' '                                 " no display
      ' '                                 " sum this column
      'X'                                 " do not sum
      ' '                                 " input allowed?
      ' '                                 " currenct type field name
      ' '                                 " data type
      'X'.                                " hotspot.
perform sub_assign_events.
Create a Layout for the ALV
perform sub_layout.
Define the key fields that links the header & item tables
perform sub_define_key.
dispaly list
perform sub_call_list_display.
endform.                    " sub_display_alv
*&      Form sub_populate_fieldcatalog
      text
     -->P_G_FIELDCAT text
     -->P_0198   text
     -->P_0199   text
     -->P_0200   text
     -->P_0201   text
     -->P_0202   text
     -->P_0203   text
     -->P_0204   text
     -->P_0205   text
     -->P_0206   text
     -->P_0207   text
     -->P_0208   text
     -->P_0209   text
     -->P_0210   text
     -->P_0211   text
     -->P_0212   text
     -->P_0213   text
form sub_populate_fieldcatalog using
                                 l_fieldname
                                 l_tabname
                                 l_column_heading
                                 l_outputlen
                                 l_fix_column
                                 l_key
                                 l_no_out
                                 l_do_sum
                                 l_no_sum
                                 l_input
                                 l_cfieldname
                                 l_datatype
                                 l_hotspot.
t_fieldcat-fieldname      = l_fieldname.
t_fieldcat-tabname        = l_tabname.
t_fieldcat-reptext_ddic   = l_column_heading.
t_fieldcat-outputlen      = l_outputlen.
t_fieldcat-fix_column     = l_fix_column.
t_fieldcat-key            = l_key.
t_fieldcat-no_out         = l_no_out.
t_fieldcat-do_sum         = l_do_sum.
t_fieldcat-no_sum         = l_no_sum.
t_fieldcat-cfieldname     = l_cfieldname.
t_fieldcat-datatype       = l_datatype.
t_fieldcat-hotspot        = l_hotspot.
append t_fieldcat.clear t_fieldcat.
endform.                    " sub_populate_fieldcatalog
*&      Form sub_assign_events
      text
--> p1        text
<-- p2        text
form sub_assign_events.
refresh t_event.
call function 'REUSE_ALV_EVENTS_GET'
   exporting
     i_list_type           = 1
   importing
     et_events             = t_event[]
   exceptions
     list_type_wrong       = 1
     others                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Read the record for the top-of-page event
read table t_event with key slis_ev_top_of_page.
if sy-subrc = 0.
    t_event-form = g_formname.
    append t_event.
endif.
endform.                    " sub_assign_events
*&      Form SUB_LAYOUT
      text
--> p1        text
<-- p2        text
form sub_layout.
   clear x_layout.
x_layout-f2code = 'QUOTE'.
x_layout-zebra = 'X'.
x_layout-expand_fieldname = 'EXPCOL'. " Field for expand/collapse
*Stat
x_layout-colwidth_optimize = 'X'.
x_layout-no_totalline = 'X'.   " 0001+
endform.                    " SUB_LAYOUT
*&      Form SUB_DEFINE_KEY
      text
--> p1        text
<-- p2        text
form sub_define_key.
   clear x_keyinfo.
x_keyinfo-header01 = 'VBELN'.
x_keyinfo-item01   = 'VBELN'.
endform.                    " SUB_DEFINE_KEY
form top_of_page.
write :/10 sy-datum, 20 sy-pagno, 30 sy-uname.
endform.
form sub_user_command using f_ucomm like sy-ucomm
                            f_selfield type slis_selfield.
if f_ucomm = 'QUOTE'.
    if f_selfield-fieldname = 'VBELN'.
      Set Parameter id 'AUN' field f_selfield-value.
      call transaction 'VA03'.
    endif.
endif.
endform.
*&      Form sub_call_list_display
      text
--> p1        text
<-- p2        text
form sub_call_list_display.
call function 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
exporting
    i_callback_program             = g_repid
    i_callback_user_command        = 'SUB_USER_COMMAND '
    is_layout                      = x_layout
    it_fieldcat                    = t_fieldcat[]
    i_save                         = 'A'
    it_events                      = t_event[]
    i_tabname_header               = 'T_HEADER'
    i_tabname_item                 = 'T_ITEM'
    is_keyinfo                     = x_keyinfo
tables
    t_outtab_header                = t_header[]
    t_outtab_item                  = t_item[]
exceptions
   program_error                  = 1
   others                         = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " sub_call_list_display

OpenDirectory: Unable To Load Replica List, after Time Machine Restore

I followed the following instructions provided on another thread (Open Directory: "Unable to load replica list"):
Many Open Directory problems can be resolved by taking the following steps.
1. The OD master must have a manually-assigned IP address on the local network, not a dynamic address.
2. The primary DNS server used by the master must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
3. Verify that the master's hostname matches its domain name by running the shell command
sudo changeip -checkhostname
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Export all OD users, delete them, turn off OD, turn it back on, and import. Ensure that the UID's are in the 1001+ range.
And got the following results:
Check.
Check.
Resulted in the following console output: The names match. There is nothing to change.
The touch command resulted in "No such file or directory." I circumvented this by manually creating the migration directory, then running the command again. The killall command failed saying "No matching processes were found." Opening the server app after that shows no change.
My trusted certificate was apparently not restored from the backup, as it was no longer listed. I switched to the self-signed one until a CSR can be made.
I'm not clear on what this actually means. There is no unbind or rebind functionality in the server app. Not to mention that my users or groups are no longer listed.
Nothing changed after rebooting the server.
Have always logged into server using the local server admin account.
Where is this done? I don't see any place to do this in the Server App.
At this point I'm suspecting that there are some serious Time Machine recovery bugs with server, as I have tried with multiple different restore points all ending in the exact same result.
Any recommendations on where to go from here? I would love to do a fresh install, but need to archive the data from the server first. Unfortunately, I don't see how I can export each users' data without being able to log in as them.

There seem to be some issues with PostgreSQL not running. Marketcircle Daylite and Billings Pro also won't start, and are showing errors to that effect.

Unable to expand drop down by index UI element

Hi,
I have got one Drop down by index in my webdynpro form and I want to bind this to backend data. For this purpose, I created one adaptive rfc model and also did all this model binding, context mapping etc.
Now my context in view looks like this :- GetDropDown_Mn (parent node) , this has got child Output_DropDown which again has two value attributes Name and Text.
This is component controller code where you bind and invalidate
__Shell__Ca_Read_Cr_Drbox_Val_Input dropdown = new __Shell__Ca_Read_Cr_Drbox_Val_Input();
        wdContext.nodeGetDropDown_Mn().bind(dropdown);
        wdContext.currentGetDropDown_MnElement().modelObject().execute();
        wdContext.nodeOutput_DropDown().invalidate();
I then tried to bind my UI element in view with Name attribute , but when I try to run my application , the field appears as read only, kind of non editable (blocked) and I am unable to expand my dropdown.
The readonly property of UI element is false. I have hard coded one value like " Please select from drop down list " and I want the backend values to come below this. For this, I have written code to append the backend values with the hardcoded value. Now the problem is my dropdown is blocked and not able to expand ( unable to click the arrow button), and I cannot see the other values in dropdown except the hard coded value.
Can someone please help me on this.
The cardinality of context node is 1..n, selection = 0..1 and I have set Leadselection = -1.
Thanks and regards,
Sai

Hi Sai,
You can use the below code to add the please select in ur drop down in wdInit() method
wdContext.nodeVn_Node().currentVn_NodeElement().setVa_Attribute("-Please Select-");
please use the name of node as u have created in the context.
and after that please check if yoy are getting values from RFC call or not.
if you are getting the values then try to change the selection property of that node to 1..n and comment the lead selection line that you have written.
hope this will help.
Regards
Narendra

Unable to expand...

hi,
i've just installed sqldeveloper 1.2.1-32.13 on mac os x 10.4.11.
it's the first install for me, first install on this machine.
when connected to a database, in the left column of the main window i'm unable to expand virtually all of those nodes (tables, views, ...):
click on the triangle next to "tables", it opens a dialog "loading tables..." which then instantly disappears. no tables are being listed, and the triangle i just clicked on also diappears. no more clicking on that node possible. same is for views, indexes, ...
the db connection appears to be fine, since i can type a sql select command (on the right) and get a valid result.
i have the J2SE 5.0 set as primary java application runtime version. i have 1.5.0_07 which appears to be the latest release for os x (?).
any idea what's wrong?
thanks for your feedback.

i get no messages in the system console, but launching from terminal shows a java exception:
Exception in thread "ProgressBarThread" java.lang.NoSuchMethodError: oracle.jdbc.OraclePreparedStatement.setStringAtName(Ljava/lang/String;Ljava/lang/String;)V
at oracle.dbtools.db.DBUtil.bind(DBUtil.java:746)
at oracle.dbtools.db.DBUtil.bind(DBUtil.java:1096)
at oracle.dbtools.db.DBUtil.executeOracleQuery(DBUtil.java:471)
at oracle.dbtools.db.DBUtil.executeQuery(DBUtil.java:498)
at oracle.dbtools.raptor.navigator.ObjectQueryInstance.executeQuery(ObjectQueryInstance.java:73)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.getChildren(XmlFolderInstance.java:121)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.listChildren(XmlFolderInstance.java:67)
at oracle.dbtools.raptor.navigator.ObjectFilter$1Loader.doWork(ObjectFilter.java:144)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
at java.lang.Thread.run(Thread.java:613)
apparently it can't display the progressbar. but why?

Unable to view table list in sql developer

I am able to connect to the database through sql developer but unable to view tables list.
Select query is displaying the contents though.
Any Help ???

Using SQL Developer, I log in using the owner user id and password. I can see all but one of my materialized views. It was definitely created by the user id I'm logged in as. A query of user_objects in sql+ shows all MVs, including the one that's missing in SQL Developer. If I log in using the same credentials in TOAD, the MV is displayed in the current schema, as I'd expect. The super weird thing is that if I use the previous version of SQL Developer, I see that MV! Any thoughts?
Edited by: [email protected] on Feb 25, 2009 9:19 AM

Hyperion Analyzer - unable to expand user list

Similar Messages

Maybe you are looking for