Hyperion DataAccessLayerException database version mismatch

Hello,
We receive the following error in the Event Viewer when attempting to start the process manager service:
Hyperion DataAccessLayerException database version mismatch: Hyperion.SessionManager schema version is 11.1.2.0.0.11, database version schema is 11.1.2.1.0.5.
This is happening after an attempt to run a maintenance upgrade from version 11.1.2.0 to version 11.1.2.1. We ran into problem during the upgrade but the client then needed to complete their month-end so we rolled everything back by restoring VM image back-up that were done before teh upgrade attempt as well as restoring the DB's from before the upgrade.
Everything should have been restored to it's previous state before the upgrade but after restoring everything we still get an error pointing to an upgraded schema. Makes no sense to us.
Is it possible there's some sort of script running somewhere that upgrading this schema only when we restore the database? What could be causing this?
Any ideas would be much appreciated.
We have built another environment for our clients monthend but still baffled by why the one schema is complaining and didn't get restored to 11.1.2.0.
Thanks,
Dan

Hello Jasmine,
It does not give us the option to re-use the tables.
We have basically rebuilt on another environment now so the client can continue with month-end but we still need to find out what went wrong.
We suspect that it's either the DB backup or restore that went wrong but we cannot prove it. The DBA is kind of third party. We have to take his word for it.
Version Oracle 10.2.
Regards,

Similar Messages

  • [Solved] sqlite3: SQLite header and source version mismatch

    Is anyone else getting this error?
    $ sqlite3
    SQLite header and source version mismatch
    2009-09-11 14:05:07 b084828a771ec40be85f07c590ca99de4f6c24ee
    2012-03-20 11:35:50 00bb9c9ce4f465e6ac321ced2a9d0062dc364669
    I just performed a full system upgrade
    $ pacman -Syyu
    I tried re-installing:
    $ pacman -Rdd sqlite3
    $ pacman -S sqlite3
    I tried updating the shared library links (as suggested by a post):
    $ ldconfig
    None of the above steps helped...
    $ pacman -Qs sqlite3
    local/sqlite3 3.7.11-1
    A C library that implements an SQL database engine
    $ uname -a
    Linux mdt3 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 09:10:39 CET 2012 x86_64 AMD Opteron(tm) Processor 6128 AuthenticAMD GNU/Linux
    Last edited by rWarrior (2012-04-25 21:03:38)

    Hi,
    I've got the same problem...
    SQLite header and source version mismatch
    2011-06-23 19:49:22 4374b7e83ea0a3fbc3691f9c0c936272862f32f2
    2012-03-20 11:35:50 00bb9c9ce4f465e6ac321ced2a9d0062dc364669
    Can u tell me how to fix it? This occured when I've unpacked sqlite-autoconf-3071100.tar.gz, entered into unpacked directory with terminal and used commands:
    ./configure
    make
    sudo make install
    sqlite3
    As u've said before the problem is with libsqlite3.so... So i've searched it in File System. And the result is:
    One file with name libsqlite3.so - /usr/local/lib
    Two files with name libsqlite3.so.0 One is here - /usr/local/lib and another here - /usr/lib/i386-linux-gnu
    Two files with name libsqlite3.so.0.8.6 One is here - /usr/local/lib and another here - /usr/lib/i386-linux-gnu
    So... can u tell me which one to delete (in which folder)? What to do next? I am newbie... so if it's possible tell in little steps.
    Thanks in advance.
    Best wishes,
    Teddy.
    Last edited by TeddyRO (2012-04-27 19:57:18)

  • Dispatcher not starting up ::Shared library version mismatch

    Hi,
    System is SAP ECC 6.0, AIX and Oracle 10g.
    We upgraded the Kernel Level from 201 to Level 221.
    <hostname>/root$ su - <sid>adm
    [YOU HAVE NEW MAIL]
    .profile[30]: 1:  not found.
    <hostname>:sidadm> disp+work
    disp+work information
    kernel release                700
    kernel make variant           700_REL
    compiled on                   AIX 2 5 005DD9CD4C00
    compiled for                  64 BIT
    compilation mode              UNICODE
    compile time                  Aug 23 2009 20:51:38
    update level                  0
    patch number                  221
    source id                     0.221
    supported environment
    database (SAP, table SVERS)   700
    operating system
    AIX 1 5
    AIX 2 5
    AIX 3 5
    After upgrading the kernel dispatcher is not starting. Kindly find the below error:
    sysno      10
    sid        SID
    systemid   324 (IBM RS/6000 with AIX)
    relno      7000
    patchlevel 0
    patchno    221
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        778402
    Wed Nov 25 12:20:08 2009
    kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (10 778402) [dpxxdisp.c   1287]
    DwSLCheckVersion: shared library version mismatch:
            shared lib "dw_xml.so" version 201 <-> kernel version 221
            shared lib "dw_xtc.so" version 201 <-> kernel version 221
            shared lib "dw_stl.so" version 201 <-> kernel version 221
            shared lib "dw_gui.so" version 201 <-> kernel version 221
            shared lib "dw_mdm.so" version 201 <-> kernel version 221
    DP_FATAL_ERROR => Version mismatch of dw shared libraries detected. See dev_disp trace for details.
    Set environment variable SAP_NO_SLIB_CHECK=1 to disable version checking.
    DISPATCHER EMERGENCY SHUTDOWN ***
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 25 12:20:13 2009
    NiISelect: TIMEOUT occured (5000ms)
    ERROR => DpHalt: my PID is not the dispatcher's (778402/0) [dpxxdisp.c   10510]
    Kindly look into the issue. Looking forward for your reply.
    Thanks,
    Soumya

    Soumya Saha wrote:
    ERROR => DpHalt: my PID is not the dispatcher's (778402/0) http://dpxxdisp.c 10510
    The system appears to think that the dispatcher process may already be running. Stop all the SAP processes and run cleanipc to clear out the shared memory. I've seen this on AIX before where the shared memory will prevent SAP from starting back up and clearing these resolved the issue.
    Hope that is helpful.
    J. Haynes

  • Version Mismatch on Deployment

    Hi,
    I think I have a version mismatch problem here on deployment, but cannot figure out how to resolve it. We have two ASP.NET web apps deployed, called App1 and App2. Both use Crystal Reports. The reports display fine in a report viewer on App1 but on App2 all I get is a blank viewer.
    App1 was originally developed in Visual Studio 2008 along with CR2008, incorporating CrystalDecisions.Web ver. 12.0.2000. Then it was deployed to the server, along with appropriate redistributable. It all worked fine.
    App2 came along, and I switched to VS2010 and CR2010. I also converted App1 to build and run on my dev machine in VS2010 and CR2010, using CrystalDecisions.Web ver. 13.0.2000. On my dev machine, both apps run fine and report fine.
    I deployed App2 to the server, along with the appropriate redistributable for CR. I did not deploy the updated App1. So now on the server, App1 is looking for ver. 12.0.2000.0 of CrystalDecisions.Web in the GAC, and App2 is looking for ver. 13.0.2000.0.
    I have verified that both versions of CrystalDecisions.Web are in the GAC.
    Now App1 still reports fine on the server (although there were some non-reproducible hiccups), but App2 will not display the report. The viewer comes up blank. Again, this works on my dev machine.
    Any suggestions as to why App2 will not view the reports? The relevant code from the App2 web.config is listed below.  The source code from the page that actually displays the report is in a followup reply, since it seems too large to put in this message.
    Thanks.
    --Dan
    web.config
    <?xml version="1.0"?>
    <configuration>
      <configSections>
        <sectionGroup name="businessObjects">
          <sectionGroup name="crystalReports">
            <section name="rptBuildProvider" type="CrystalDecisions.Shared.RptBuildProviderHandler, CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, Custom=null"/>
          </sectionGroup>
        </sectionGroup>
      </configSections>
         <appSettings>
           <add key="CrystalImageCleaner-Age" value="120000"/>
           <add key="CrystalImageCleaner-AutoStart" value="true"/>
           <add key="CrystalImageCleaner-Sleep" value="60000"/>
           <!--     DB credentials for CrystalReports -->
              <add key="ReportDatabaseName" value="MyDB"/>
              <add key="ReportPassword" value="myPassword?"/>
              <add key="ReportServerName" value="MyServer"/>
              <add key="ReportUserID" value="MyUser"/>
         </appSettings>
         <system.web>
          <compilation debug="true" targetFramework="4.0">
             <assemblies>
               <add assembly="CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
               <add assembly="CrystalDecisions.ReportSource, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
               <add assembly="CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
               <add assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
               <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
             </assemblies>
             <buildProviders>
                <add extension=".rpt" type="CrystalDecisions.Web.Compilation.RptBuildProvider, CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
             </buildProviders>
          </compilation>
           <httpHandlers>
              <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
              <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
           </httpHandlers>
           <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID"/>
         </system.web>
         <system.webServer>
           <handlers>
              <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode"/>
              <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode"/>
           </handlers>
         </system.webServer>
       <businessObjects>
          <crystalReports>
             <rptBuildProvider>
                <add embedRptInResource="true"/>
             </rptBuildProvider>
          </crystalReports>
       </businessObjects>
    </configuration>

    Here is the rest of the source code, both declarative and code-behind.
    ReportPage.aspx
    <%@ Page Title="" Language="C#" AutoEventWireup="true" CodeFile="ReportPage.aspx.cs"
         Inherits="Reports_ReportPage" %>
    <%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
         Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
    <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head id="Head2" runat="server">
         <title></title>
    </head>
    <body>
         <form id="form1" runat="server">
        <asp:ScriptManager ID="ScriptManager2" runat="server"></asp:ScriptManager>
         <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
          AutoDataBind="True"
              GroupTreeImagesFolderUrl=""
              Height="1158px"
              ToolbarImagesFolderUrl=""
              ToolPanelWidth="200px"
              Width="1059px" />
         </form>
    </body>
    </html>
    ReportPage.aspx.cs
    using CrystalDecisions.CrystalReports.Engine;
    using CrystalDecisions.Shared;
    using System;
    using System.Configuration;
    using System.Data;
    using System.Text;                                   
    public partial class Reports_ReportPage : Page
         ReportDocument rptDoc;
         protected void Page_Load(object sender, EventArgs e)
              #region QueryStrings
              long lngKeyFieldID = -1;
              string strReportName = string.Empty;
              string strReportType = string.Empty;
              if (Request.QueryString["strReportName"] != null)
                   strReportName = Request.QueryString["strReportName"].ToString();
              if (Request.QueryString["strReportType"] != null)
                   strReportType = Request.QueryString["strReportType"].ToString();
              if (Request.QueryString["KFID"] != null)
                   lngKeyFieldID = Convert.ToInt64(Request.QueryString["KFID"]);
              #endregion          //  QueryStrings
              rptDoc = new ReportDocument();
              string strReportSourceFolder = ConfigurationManager.AppSettings["ReportSourceFolder"];
              rptDoc.Load(strReportSourceFolder + strReportName + ".rpt");
          #region parameters
          if (lngKeyFieldID > 0)
             //  set parameters based on rpt name
                   switch (strReportName)
                        case "JobDetails":
                             rptDoc.SetParameterValue("JobID", lngKeyFieldID);
                             rptDoc.SetParameterValue("IsPaid", true);
                             break;
              #endregion          //  parameters
              #region DB connection
              //  from Deepu at SAP tech support
              //  this is necessary to pass db credentials programmatically
              //  the report must be designed in CR using an OLE DB connection type
              ConnectionInfo conn = new ConnectionInfo();
              conn.ServerName = ConfigurationManager.AppSettings["ReportServerName"];
              conn.DatabaseName = ConfigurationManager.AppSettings["ReportDatabaseName"];
              if (conn.ServerName == "Dev")
                   conn.IntegratedSecurity = true;
              else
                   conn.UserID = ConfigurationManager.AppSettings["ReportUserID"];
                   conn.Password = ConfigurationManager.AppSettings["ReportPassword"];
              Tables tables = rptDoc.Database.Tables;
              foreach (Table table in tables)
                   TableLogOnInfo tableLogonInfo = table.LogOnInfo;
                   tableLogonInfo.ConnectionInfo = conn;
                   table.ApplyLogOnInfo(tableLogonInfo);
              #endregion          //  DB connection
              #region Viewer
              CrystalReportViewer1.DisplayGroupTree = false;          //  deprecated, but still works
              CrystalReportViewer1.DisplayToolbar = true;
              CrystalReportViewer1.HasToggleGroupTreeButton = false;
              CrystalReportViewer1.HasToggleParameterPanelButton = false;
              CrystalReportViewer1.Page.Title = strReportName;
              CrystalReportViewer1.ReportSource = rptDoc;
              #endregion          //  Viewer
         protected void Page_Unload(object sender, EventArgs e)
              if (rptDoc != null)
                   rptDoc.Close();
                   rptDoc.Dispose();

  • SQLLIB version mismatch

    We have Oracle 9i Application Server 9.0.2.0.1 and Oracle 9i Database
    9.2.0.1.0 products for Linux. We are using this products on Linux RedHat
    8.0 (kernel-2.4.18-14).
    We are using pro*c compiler on the 9i database server to compile and run
    our older programs made with oracle 7.3.4. The pro*c compiler on 9i
    database server is working fine with some modification in our older
    programs.
    We now want to use pro*c compiled files on 9i application server. But we
    can't execute or compile these pro*c programs on application server. It
    shows following error...
    "SQL-02127: Precompiler/SQLLIB version mismatch"
    We have tried to install pro*c utility included as a part of Oracle 9i
    Client from CDs of 9i database, but it shows following error.
    "Oracle Client cannot be installed on existing Oracle 9i Application
    Server ORA_HOME"
    Pls. guide us how to compile and use pro*c programs on 9i application server.
    Thanks in advance,
    C D Surti (Asst. Officer)

    We have Oracle 9i Application Server 9.0.2.0.1 and Oracle 9i Database
    9.2.0.1.0 products for Linux. We are using this products on Linux RedHat
    8.0 (kernel-2.4.18-14).
    We are using pro*c compiler on the 9i database server to compile and run
    our older programs made with oracle 7.3.4. The pro*c compiler on 9i
    database server is working fine with some modification in our older
    programs.
    We now want to use pro*c compiled files on 9i application server. But we
    can't execute or compile these pro*c programs on application server. It
    shows following error...
    "SQL-02127: Precompiler/SQLLIB version mismatch"
    We have tried to install pro*c utility included as a part of Oracle 9i
    Client from CDs of 9i database, but it shows following error.
    "Oracle Client cannot be installed on existing Oracle 9i Application
    Server ORA_HOME"
    Pls. guide us how to compile and use pro*c programs on 9i application server.
    Thanks in advance,
    C D Surti (Asst. Officer)

  • RMAN-05520: database name mismatch

    Hi All,
    My DB Version :11.2.0
    OS :Linux
    What i am doing is to try duplicating the database on the same machine using RMAN. But what happens when i am trying to run the below mentione command i am getting below error
    RMAN> duplicate target database to test2 from active database nofilenamecheck;
    Starting Duplicate Db at 31-DEC-12
    using channel ORA_AUX_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/31/2012 02:25:32
    RMAN-05520: database name mismatch, auxiliary instance has TEST1, command specified TEST2
    Can anyone please suggest me why i am facing this problem.
    connecting to rman as follows
    rman target sys/tiger@test1
    RMAN> connecting auxiliary sys/tiger@test2
    Connected to auxiliary database: TEST1(not mounted)
    my pfile entries for test2(cloned db ) are as follows:
    test2.__db_cache_size=658505728
    test2.__java_pool_size=4194304
    test2.__large_pool_size=4194304
    test2.__oracle_base='/home/app/oracle/app/oracle'#ORACLE_BASE set from environment
    test2.__pga_aggregate_target=306184192
    test2.__sga_target=914358272
    test2.__shared_io_pool_size=0
    test2.__shared_pool_size=239075328
    test2.__streams_pool_size=0
    *.audit_file_dest='/home/app/oracle/app/oracle/admin/test2/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/home/app/oracle/app/oracle/oradata/test2/control01.ctl','/home/app/oracle/app/oracle/flash_recovery_area/test2/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_name='test1'
    *.db_recovery_file_dest='/home/app/oracle/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=4039114752
    *.diagnostic_dest='/home/app/oracle/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=test2XDB)'
    *.local_listener='LISTENER_TEST1'
    *.open_cursors=300
    *.pga_aggregate_target=304087040
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=912261120
    *.undo_tablespace='UNDOTBS1'
    *.db_file_name_convert='/home/app/oracle/app/oracle/oradata/test1','/home/app/oracle/app/oracle/oradata/test2'
    *.log_file_name_convert='/home/app/oracle/app/oracle/oradata/test','/home/app/oracle/app/oracle/oradata/test2'

    You are cloning...right?
    Then shutdown the target database. Then change the init parameter file *.db_name='test2' (that is your target database name)
    and then startup the instance in nomount mode and then try to fire the RMAN command.

  • Physical Standby: RFS: 'Attach' request version mismatch

    I have a 10.1.0.4 database that I want to move to a new machine and also upgrade to 10.2.0.1. I'm trying to follow the instructions for using SQL Apply to perforn a rolling upgrade with minimal downtime. My understanding is that I must first create a physical standby, and then transition the physical standby to a logical standby. Well, my physical standby is failing. I see the following in the standby's alert log:
    RFS: 'Attach' request version mismatch
    Both databases have their COMPATIBLE parameter set to 10.1.0.2.
    As an aside, if I must first create a working physical standby, then why do I need to transition that standby to a logical standby? I mean, can't I just get the physical standby working, perform a switchover, and be done with it?

    I was confused. I thought I could just create a 10.2.0.1 standby for a 10.1.0.4 primary. The process, though, is to first get a working 10.1.0.4 (logical) standby for the 10.1.0.4 primary. At that point dbua can be used to upgrade the standby, and I can go from there.
    I'm sure everything will work, now that I understand the steps required.

  • Observer Dll Version Mismatch

    Hi,
    I have a project, which works fine for a client in SAP 2007 PL30.
    I'm trying to connect the same project (in debug mode) to another client, who is in 2007A SP00 PL15.
    But, I'm getting the error - Observer DLL version mismatch, when I'm trying to connect.
    oCompany.SetSboLoginContext(ocookiecontext)
    If oCompany.Connect <> 0 Then
    'Error
    I guess it is something to do with the version of SAPBOUICOM.Dll, SAPBOBSCOM.DLL in my application.
    I tried using both as 2007, also I tried using DI as 2005 and UI as 2007.
    Nothing is working.
    Please help me with this.
    Thanks.
    -Geetha

    Hi Geetha 
    To solve this issue please do the following:
    1.  Go to Start -> Run and type in %temp%.
    2.  Locate the folder SM_OBS_DLL .
    3.  Delete this folder (if you cannot delete it rename it)
    When you connect again the correct version of the ObserverdLL will be
    downloaded from the SBOCommon Database.
    Regards,
    Syn Qin
    SAP Business One Forums Team

  • Dp lib version mismatch-After kernel upgrade

    Hi All,
    After kernel upgrade from 700 162 to 179 all the workprocess are not coming up i am getting the below error:
    Full qualified hostname = XXXXXX.saipc.XXX.com
    ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c  681]
    LOCATION    SAP-Gateway on host XXXXXXX / sapgw01
    ERROR       dp lib version mismatch, please check installation
    TIME        Mon Oct 20 00:33:37 2008
    RELEASE     700
    COMPONENT   DP
    VERSION     241000
    RC          -9999
    MODULE      dpxxtool2.c
    LINE        688
    DETAIL      version of external and kernel dp lib mismatch (ext lib
                 version is 241000 / kernel lib version is 239000)
    COUNTER     1
    ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c  369]
    ***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c     14652]
    XXXXXXXXX:ts2adm 30% pg sapcpe.log
    ================ >>> main =======================
    INFO:    sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#18 $ SAP
    =================================================
    INFO:    Try to find file table sapcpeft (default:sapcpeft)
    INFO:    Try to find file table in the central directory /usr/sap/TS2/SYS/exe/ctrun/sapcpeft
    INFO:    not found any file table.
    =================================================
    Update Local Programs (dir-sync + file-path + ln)
    =================================================
    Starting at 2008/10/20 00:33:34
    ERROR:   can't change to central Executable-Dir /usr/sap/TS2/SYS/exe/ctrun (No such file or directory) [sapxxcpe.c:1488]
    Mon Oct 20 00:50:19 2008
    ERROR => gateway (pid 24413) died [dpxxdisp.c   16063]
    DpGwCheck: appc_adm.stat = 2
    DP_FATAL_ERROR => Gateway could not be started - I better exit now
    please help in solving this problem
    Thanks
    Giridhar
    Edited by: giridhar n on Oct 20, 2008 12:47 PM

    Hi,
    We faced an issue with workprocesses which are not coming up after the kernel(700) upgrade from patch 162 to 179. below are the error logs:
    Error Log
    (XXXXXXXXX is the hostname)
    Dev_W1:
    XXXXXXXXX:ts2adm 9% more dev_w1.old
    trc file: "dev_w1", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      01
    M sid        TS2
    M systemid   370 (Solaris on SPARCV9 CPU)
    M relno      7000
    M patchlevel 0
    M patchno    162
    M intno      20050900
    M make:      single threaded, Unicode, 64 bit, optimized
    M pid        3867
    M
    M
    M Mon Oct 20 03:59:26 2008
    M  kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q01=> ThInit, WPStart (Workproc 1 1 3867) [thxxhead.c   1281]
    M  ThInit: running on host XXXXXXXXX
    M  calling db_connect ...
    C  Oracle Client Version: '10.2.0.2.0'
    C
    C Mon Oct 20 03:59:27 2008
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPTS2's password
    C  Connecting as /-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x106eea0c0 0x106ef1b80 0x106f02318
    C  Attaching to DB Server TS2 (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598)
    C  Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
    C  Now '/-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
    C  Got SAPTS2's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=0x106f02248,usrhp=0x106ef2398)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPTS2/<pwd>-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x106eea0c0 0x106ef1b80 0x106f02318
    C  Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
    C  Now 'SAPTS2/<pwd>-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance TS2 is running on XXXXXXXXX with ORACLE version 10.2.0.2.0 since OCT 20, 2008, 03:49:47
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20081020 035926 XXXXXXXXX
    C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
    .sar,.gif
    I
    I Mon Oct 20 03:59:30 2008
    I  MtxInit: 1 0 0
    M  SHM_PRES_BUF                 (addr: 0xffffffff64c00000, size: 20000768)
    M  SHM_ROLL_AREA                (addr: 0xfffffffe40000000, size: 268435456)
    M  SHM_PAGING_AREA              (addr: 0xfffffffe36000000, size: 134217728)
    M  SHM_ROLL_ADM                 (addr: 0xffffffff7597a000, size: 3715586)
    M  SHM_PAGING_ADM               (addr: 0xffffffff79a00000, size: 656416)
    M  ThCreateNoBuffer             allocated 572152 bytes for 1000 entries at 0xfffffffe2c004000
    M  ThCreateNoBuffer             index size: 3000 elems
    M  ThCreateVBAdm                allocated 12176 bytes (50 server) at 0xffffffff7a900000
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 1 initializing ....
    X  Using implementation std
    X  <ES> Info: use normal pages (no huge table support available)
    X  ES initialized.
    B  dbntab: NTAB buffers attached
    B  dbntab: Buffer FTAB(hash header)  (addr: 0xfffffffe2c092088, size: 576)
    B  dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe2c0922c8, size: 798968)
    B  dbntab: Buffer FTAB(item array)   (addr: 0xfffffffe2c1553c0, size: 3195648)
    B  dbntab: Buffer FTAB(data area)    (addr: 0xfffffffe2c4616c0, size: 30740480)
    B  dbntab: Buffer IREC(hash header)  (addr: 0xfffffffe2e1b6088, size: 576)
    B  dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe2e1b62c8, size: 798968)
    B  dbntab: Buffer IREC(item array)   (addr: 0xfffffffe2e2793c0, size: 798912)
    B  dbntab: Buffer IREC(data area)    (addr: 0xfffffffe2e33c480, size: 6148096)
    B  dbntab: Buffer STAB(hash header)  (addr: 0xfffffffe2e91c088, size: 576)
    B  dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe2e91c2c8, size: 798968)
    B  dbntab: Buffer STAB(item array)   (addr: 0xfffffffe2e9df3c0, size: 798912)
    B  dbntab: Buffer STAB(data area)    (addr: 0xfffffffe2eaa2480, size: 3072000)
    B  dbntab: Buffer TTAB(hash header)  (addr: 0xfffffffe2ed94088, size: 3072)
    B  dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe2ed94c88, size: 798968)
    B  dbntab: Buffer TTAB(item array)   (addr: 0xfffffffe2ee57d80, size: 1997280)
    B  dbntab: Buffer TTAB(data area)    (addr: 0xfffffffe2f03f760, size: 14580144)
    B  db_con_shm_ini:  WP_ID = 1, WP_CNT = 24, CON_ID = -1
    B  dbstat: TABSTAT buffer attached (addr: 0xfffffffe28012008)
    B  dbtbxbuf: Buffer TABL  (addr: 0xfffffffe24000100, size: 60000256, end: 0xfffffffe27938900)
    B  dbtbxbuf: Buffer TABLP (addr: 0xfffffffe20000100, size: 40960000, end: 0xfffffffe22710100)
    B  dbexpbuf: Buffer EIBUF (addr: 0xffffffff5d800108, size: 4194304, end: 0xffffffff5dc00108)
    B  dbexpbuf: Buffer ESM   (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
    B  dbexpbuf: Buffer CUA   (addr: 0xfffffffe2fe30108, size: 5120000, end: 0xfffffffe30312108)
    B  dbexpbuf: Buffer OTR   (addr: 0xfffffffe59800108, size: 4194304, end: 0xfffffffe59c00108)
    B  dbcalbuf: Buffer CALE  (addr: 0xffffffff75d08000, size: 500000, end: 0xffffffff75d82120)
    I  *** ERROR => ShmProtect(62,3) shmat(268435641,0x0xfffffffe5a000000,(SHM_RND | 0)) (22: Invalid argument) [shmux.c      2782]
    I  *** ERROR => ShmCreate: ShmProtect( 62, 3) failed [shmux.c      1359]
    I  *** ERROR => ShmCreate( ATTACH 62, 86228824) failed 1 [mpixx.c      855]
    M  *** ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c  5064]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c   10506]
    M
    M  Info for wp 1
    M
    M    pid = 3867
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    B  dbtbxbuf: Saving TBX statistics:
    B  dbtbxbuf: 0 object entries written.
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 1 3867) [dpuxtool.c   269]
    dev_icm:
    trc file: "dev_icm", trc level: 1, release: "700"
    sysno      01
    sid        TS2
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    177
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3865
    [Thr  1] started security log to file dev_icm_sec
    [Thr  1] ICM running on: XXXXXXXXX.saipc.XXX.com
    [Thr  1] MtxInit: 30001 0 2
    [Thr  1] IcmInit: listening to admin port: 64999
    [Thr  1] ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2_mt 681]
    [Thr  1]
    [Thr  1] *  LOCATION    ICM runing on host XXXXXXXXX
    [Thr  1] *  ERROR       dp lib version mismatch, please check installation
    [Thr  1] *
    TIME        Mon Oct 20 03:59:28 2008
    [Thr  1] *  RELEASE     700
    [Thr  1] *  COMPONENT   DP
    [Thr  1] *  VERSION     241000
    [Thr  1] *  RC          -9999
    [Thr  1] *  MODULE      dpxxtool2_mt.c
    [Thr  1] *  LINE        688
    [Thr  1] *  DETAIL      version of external and kernel dp lib mismatch (ext lib
                 version is 241000 / kernel lib version is 239000)
    [Thr  1] *  COUNTER     3
    [Thr  1] *
    [Thr  1] *****************************************************************************
    [Thr  1] *** ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2_mt 369]
    [Thr  1] *** ERROR => IcmInit: IcmIPCInit failed (rc=-9999) [icxxman_mt.c 1741]
    [Thr  1] *** ICM shutdown completed (pid: 3865) ***
    dev_ms:
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr  1] Mon Oct 20 03:59:24 2008
    [Thr  1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    145
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3853
    [Thr  1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3853) [msxxserv_mt. 1834]
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] load acl file = /usr/sap/TS2/SYS/global/ms_acl_info
    [Thr  1] MsGetOwnIpAddr: my host addresses are :
    [Thr  1]   1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
    [Thr  1]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr  1]   3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
    [Thr  1]   4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
    [Thr  1] MsHttpInit: full qualified hostname = XXXXXXXXX.saipc.XXX.com
    [Thr  1] HTTP logging is switch off
    [Thr  1] MsHttpOwnDomain: own domain[1] = saipc.XXX.com
    [Thr  1] ms/icf_info_server : deleted
    [Thr  1] *** I listen to port sapmsTS2 (3601) ***
    [Thr  1] *** I listen to internal port 3901 (3901) ***
    [Thr  1] CUSTOMER KEY: >C0395101982<
    [Thr  1] Mon Oct 20 04:01:28 2008
    [Thr  1] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from XXXXXXXXX_TS2_01 [msxxserv_mt. 4687]
    [Thr  1] Mon Oct 20 04:05:07 2008
    [Thr  1] MsSExit: received SIGINT (2)
    [Thr  1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3853) [msxxserv_mt. 5998]
    dev_rd:
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Oct 20 03:59:26 2008
    ***LOG S00=> GwInitReader, gateway started ( 3864) [gwxxrd.c     1757]
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    176
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        3864
    gateway runs with dp version 241000(ext=110000) (-(#) DPLIB-INT-VERSION-241000-UC)
    gateway (version=700.2008.06.23)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Mon Oct 20 03:59:27 2008
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    Bind service sapgw01 (socket) to port 3301
    GwPrintMyHostAddr: my host addresses are :
      1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
      2 : [127.0.0.1] localhost (LOCALHOST)
      3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
      4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
    Full qualified hostname = XXXXXXXXX.saipc.XXX.com
    ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c  681]
    LOCATION    SAP-Gateway on host XXXXXXXXX / sapgw01
    ERROR       dp lib version mismatch, please check installation
    TIME        Mon Oct 20 03:59:27 2008
    RELEASE     700
    COMPONENT   DP
    VERSION     241000
    RC          -9999
    MODULE      dpxxtool2.c
    LINE        688
    DETAIL      version of external and kernel dp lib mismatch (ext lib
                 version is 241000 / kernel lib version is 239000)
    COUNTER     1
    ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c  369]
    ***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c     14652]
    dev_rfc24:
    Trace file opened at 20081020 031506 EDT SAP-REL 700,0,162 RFC-VER U 3 985555
    ======> User is locked. Please notify the person responsible
    ABAP Programm: SAPLTMSC (Transaction: )
    Called function module: TMS_CI_START_SERVICE
    User: DDIC (Client: 015)
    Destination: TMSADM-TS2.DOMAIN_DV2 (handle: 2, 11671309, {48FC3006-2FF4-60E5-E100-0000945C1F31})
    dev_disp
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      01
    sid        TS2
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      7000
    patchlevel 0
    patchno    162
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        3854
    Mon Oct 20 03:59:25 2008
    kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 3854) [dpxxdisp.c   1257]
            shared lib "dw_xml.so" version 162 successfully loaded
            shared lib "dw_xtc.so" version 162 successfully loaded
            shared lib "dw_stl.so" version 162 successfully loaded
            shared lib "dw_gui.so" version 162 successfully loaded
            shared lib "dw_mdm.so" version 162 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >XXXXXXXXX_TS2_01                         <
    DpShMCreate: sizeof(wp_adm)             42240   (1760)
    DpShMCreate: sizeof(tm_adm)             150350080       (30064)
    DpShMCreate: sizeof(wp_ca_adm)          31232   (104)
    DpShMCreate: sizeof(appc_ca_adm)        208000  (104)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)           548064  (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0       (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)           0       (72)
    DpShMCreate: sizeof(vmc_adm)            0       (2080)
    DpShMCreate: sizeof(wall_adm)           (1000056/862328/88/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY             (addr: 0xffffffff66000000, size: 153051096)
    DpShMCreate: allocated sys_adm at 0xffffffff66000000
    DpShMCreate: allocated wp_adm at 0xffffffff66002218
    DpShMCreate: allocated tm_adm_list at 0xffffffff6600c718
    DpShMCreate: allocated tm_adm at 0xffffffff6600c778
    DpShMCreate: allocated wp_ca_adm at 0xffffffff6ef6f078
    DpShMCreate: allocated appc_ca_adm at 0xffffffff6ef76a78
    DpShMCreate: allocated comm_adm at 0xffffffff6efa96f8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0xffffffff6f02f3d8
    DpShMCreate: allocated gw_adm at 0xffffffff6f02f458
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0xffffffff6f02f488
    DpShMCreate: allocated wall_adm at 0xffffffff6f02f490
    Mon Oct 20 03:59:26 2008
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <ES> Info: use normal pages (no huge table support available)
    EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
    EsStdInit: Extended Memory 4048 MB allocated
    <ES> 4047 blocks reserved for free list.
    ES initialized.
    Mon Oct 20 03:59:31 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1659]
    ***LOG Q0K=> DpMsAttach, mscon ( XXXXXXXXX) [dpxxdisp.c   12153]
    DpStartStopMsg: send start message (myname is >XXXXXXXXX_TS2_01                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    ERROR => DpWPCheck: W0 (pid 3866) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3866) exited with exit code 255
    my types changed after wp death/restart 0xbf --> 0xbd
    ERROR => DpWPCheck: W1 (pid 3867) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3867) exited with exit code 255
    ERROR => DpWPCheck: W2 (pid 3868) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3868) exited with exit code 255
    ERROR => DpWPCheck: W4 (pid 3870) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3870) exited with exit code 255
    ERROR => DpWPCheck: W5 (pid 3871) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3871) exited with exit code 255
    ERROR => DpWPCheck: W6 (pid 3872) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3872) exited with exit code 255
    ERROR => DpWPCheck: W7 (pid 3873) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3873) exited with exit code 255
    ERROR => DpWPCheck: W8 (pid 3874) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3874) exited with exit code 255
    ERROR => DpWPCheck: W9 (pid 3875) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3875) exited with exit code 255
    ERROR => DpWPCheck: W10 (pid 3885) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3885) exited with exit code 255
    ERROR => DpWPCheck: W11 (pid 3888) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3888) exited with exit code 255
    ERROR => DpWPCheck: W12 (pid 3890) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3890) exited with exit code 255
    ERROR => DpWPCheck: W13 (pid 3902) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3902) exited with exit code 255
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 162
    Release check o.K.
    Mon Oct 20 03:59:51 2008
    my types changed after wp death/restart 0xbd --> 0x81
    ERROR => DpWPCheck: W14 (pid 3903) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3903) exited with exit code 255
    ERROR => DpWPCheck: W15 (pid 3904) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3904) exited with exit code 255
    ERROR => DpWPCheck: W16 (pid 3905) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3905) exited with exit code 255
    ERROR => DpWPCheck: W17 (pid 3908) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3908) exited with exit code 255
    ERROR => DpWPCheck: W18 (pid 3911) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3911) exited with exit code 255
    ERROR => DpWPCheck: W19 (pid 3914) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3914) exited with exit code 255
    ERROR => DpWPCheck: W20 (pid 3915) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3915) exited with exit code 255
    ERROR => DpWPCheck: W21 (pid 3916) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3916) exited with exit code 255
    ERROR => DpWPCheck: W22 (pid 3919) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3919) exited with exit code 255
    ERROR => DpWPCheck: W23 (pid 3924) died (severity=0, status=65280) [dpxxdisp.c   15218]
    child (pid=3924) exited with exit code 255
    Mon Oct 20 04:00:11 2008
    ERROR => gateway (pid 3864) died [dpxxdisp.c   16063]
    DpGwCheck: appc_adm.stat = 2
    DP_FATAL_ERROR => Gateway could not be started - I better exit now
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    kill(3869,0) successful -> process alive
    killing W3-3869 (SIGUSR2)
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Oct 20 04:00:21 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)                        Mon Oct 20 08:00:21 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     3866 Ended         no      3   0        0
    1 DIA     3867 Ended         no      3   0        0
    2 DIA     3868 Ended         no      3   0        0
    3 DIA     3869 Run           yes     0   0        0
    4 DIA     3870 Ended         no      3   0        0
    5 DIA     3871 Ended         no      3   0        0
    6 DIA     3872 Ended         no      3   0        0
    7 DIA     3873 Ended         no      3   0        0
    8 DIA     3874 Ended         no      3   0        0
    9 DIA     3875 Ended         no      3   0        0
    10 UPD     3885 Ended         no      3   0        0
    11 UPD     3888 Ended         no      3   0        0
    12 UPD     3890 Ended         no      3   0        0
    13 UPD     3902 Ended         no      3   0        0
    14 ENQ     3903 Ended         no      2   0        0
    15 BTC     3904 Ended         no      2   0        0
    16 BTC     3905 Ended         no      2   0        0
    17 BTC     3908 Ended         no      2   0        0
    18 BTC     3911 Ended         no      2   0        0
    19 BTC     3914 Ended         no      2   0        0
    20 BTC     3915 Ended         no      2   0        0
    21 SPO     3916 Ended         no      2   0        0
    22 UP2     3919 Ended         no      2   0        0
    23 UP2     3924 Ended         no      2   0        0
    Dispatcher Queue Statistics                     Mon Oct 20 08:00:21 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    0
    4000
    0
    0
    --------++++--
    +
    DIA
    4
    4
    4000
    4
    0
    --------++++--
    +
    UPD
    0
    0
    4000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    4000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    4000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    4000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    4000
    0
    0
    --------++++--
    +
    max_rq_id               7
    wake_evt_udp_now        0
    wake events             total     3,  udp     2 ( 66%),  shm     1 ( 33%)
    since last update       total     3,  udp     2 ( 66%),  shm     1 ( 33%)
    Dump of tm_adm structure:                       Mon Oct 20 08:00:21 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks                   Mon Oct 20 08:00:21 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Oct 20 04:00:26 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >XXXXXXXXX_TS2_01                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    please help me to solve this.
    Thanks
    Giridhar

  • Difference between Hyperion Financial Reporting version 7.0 and 9.3.1 ?

    Hi All,
    Can you please difine Difference between Hyperion Financial Reporting version 7.0 and 9.3.1 ?

    I migrated from 7.5 to 9.3.1 a couple years back so hopefully this is somewhat helpful.
    From a developer perspective, the report designer itself looks about the same. The most annoying changes for me were that they started migrating functionality AWAY from the client program and to the web. For instance, managing security is a pain as it is done through Workspace and it is a bit clunkly. I also ran into some issues where my old report's security information is not visible in Workspace. It is still 'working', but when you view report properties, it shows nothing for who has assigned security. Also, things like deleting/moving reports and creating folders are done through workspace and not the client program. "Copying" can be done through the client program by using "Save As" functionality.
    There is a migration tool to move your old stuff to 9.3.1. It seemed to work OK; however, the User Interface was a bit screwy. For instance, it said I was 138% complete when it finished. It copied more reports than it showed as existing.... :)
    On the back end, things changed quite a bit. In the older Financial Reports, the report objects existing in a single database table and if you wanted to, you could extract everything from that table. In 9.3.1, part of the information is in Workspace database (i.e. Report names/ID's, security access, hierarchy) and the actual report file itself is stored in a psedo-filesystem under the RM webapp. The names are not user friendly at all and you'll need to XREF from the database to make sense of it. When you finally find the actual report "file", they are compressed/encrypted.
    From an end user perspective, things pretty much work the same way as always.

  • Obeserver dll version mismatch -8003

    hello,
    i created a Company object and want to connect to the SAP BO Database but we always get the following error:
    Obeserver dll version mismatch -8003
    Please help for gods sake..!!!!!

    Hi Amit,
    Try the following steps:
    1.  Locate the Temp folder by going to Start -> Run and type %temp%.
    2.  Locate the SM_OBS_DLL folder here and delete it.
    3.  Uninstall the DI API from Add/Remove Programs.
    4.  Reboot your PC
    5.  Install the DI API from your current patch. (Download patch, extract it and then browse to Packages\DI API and run setup.exe)
    6. Run the Upgrader Common again (From the same patch as above - very important!). Browse to Packages\Upgrader Common and run setup.exe. This will update the SBO-COMMON to this patch level again. You will not lose any data.
    The error you see is usually due to a mismatch between your SBO-COMMON and the DI API that is attempting to connect to it. By taking the above steps, you ensure the same patch level is in use.
    Regards,
    Niall
    SAP Business One Forums Team

  • Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

    I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
    there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
    Maybe there is a newer setup installer? But I can't find it.
    [10:42:54]: Error:
    :Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read returned true.  so far, this is OM DB, not an empty DB
    [10:42:54]: Debug:
    :Connection was not open.  We will try to open it.
    [10:42:54]: Debug:
    :SqlConnectionReady returned True.
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read did not return true.  The MG is missing. This is not OM DB
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Always:
    :Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Never mind, found it!
    Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
    CLR Types for Microsoft® SQL Server® 2012 and now it works!! 

  • Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

    Team , Thanks for looking into this  ..
    As a last resort on  optimizing my stored procedure ( Below ) i wanted to create a Selective XML index  ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
    Index feature is not supported for the current database version.. How ever
    EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
    Is there ANY alternative way i can optimize below stored proc ?
    Thanks in advance for your response(s) !
    /****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    -- EXEC [dbo].[MN_Process_DDLSchema_Changes]
    ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
    AS
    BEGIN
    SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
    SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
    select getdate() as getdate_0
    DECLARE @XML XML , @Prev_Insertion_time DATETIME
    -- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
    SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
    -- PRINT '1'
    CREATE TABLE #Temp
    EventName VARCHAR(100),
    Time_Stamp_EE DATETIME,
    ObjectName VARCHAR(100),
    ObjectType VARCHAR(100),
    DbName VARCHAR(100),
    ddl_Phase VARCHAR(50),
    ClientAppName VARCHAR(2000),
    ClientHostName VARCHAR(100),
    server_instance_name VARCHAR(100),
    ServerPrincipalName VARCHAR(100),
    nt_username varchar(100),
    SqlText NVARCHAR(MAX)
    CREATE TABLE #XML_Hold
    ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
    BufferXml XML
    select getdate() as getdate_01
    INSERT INTO #XML_Hold (BufferXml)
    SELECT
    CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
    FROM sys.dm_xe_session_targets xet
    INNER JOIN sys.dm_xe_sessions xes
    ON xes.address = xet.event_session_address
    WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
    --RETURN
    --SELECT * FROM #XML_Hold
    select getdate() as getdate_1
    -- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
    CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
    FOR
    PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
    --RETURN
    --CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
    --SELECT GETDATE() AS GETDATE_2
    -- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
    --CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
    --USING XML INDEX [IX_XML_Hold]
    ---- FOR VALUE
    -- --FOR PROPERTY
    -- FOR PATH
    --SELECT GETDATE() AS GETDATE_3
    --PRINT '2'
    -- RETURN
    SELECT GETDATE() GETDATE_3
    INSERT INTO #Temp
    EventName ,
    Time_Stamp_EE ,
    ObjectName ,
    ObjectType,
    DbName ,
    ddl_Phase ,
    ClientAppName ,
    ClientHostName,
    server_instance_name,
    nt_username,
    ServerPrincipalName ,
    SqlText
    SELECT
    p.q.value('@name[1]','varchar(100)') AS eventname,
    p.q.value('@timestamp[1]','datetime') AS timestampvalue,
    p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
    p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
    p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
    p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
    p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
    p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
    p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
    p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
    p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
    p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
    FROM #XML_Hold
    CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
    WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
    p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
    AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
    AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
    SELECT GETDATE() GETDATE_4
    -- SELECT * FROM #TEMP
    -- SELECT COUNT(*) FROM #TEMP
    -- SELECT GETDATE()
    -- RETURN
    -- PRINT '3'
    --RETURN
    INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
    [UserName]
    ,[DbName]
    ,[ObjectName]
    ,[client_app_name]
    ,[ClientHostName]
    ,[ServerName]
    ,[SQL_TEXT]
    ,[EE_Time_Stamp]
    ,[Event_Name]
    SELECT
    CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
    ELSE T.nt_username
    END
    ,T.DbName
    ,T.objectname
    ,T.clientappname
    ,t.ClientHostName
    ,T.server_instance_name
    ,T.sqltext
    ,T.Time_Stamp_EE
    ,T.eventname
    FROM
    #TEMP T
    /** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
    -- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
    WHERE ddl_Phase ='Commit'
    AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
    AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
    WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
    AND MN.[DbName] = T.DbName
    AND MN.[Event_Name] = T.EventName
    AND MN.[ObjectName]= T.ObjectName
    AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
    AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
    -- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
    --SELECT GETDATE()
    --PRINT '4'
    --RETURN
    SELECT
    top 100
    [EE_Time_Stamp]
    ,[ServerName]
    ,[DbName]
    ,[Event_Name]
    ,[ObjectName]
    ,[UserName]
    ,[SQL_TEXT]
    ,[client_app_name]
    ,[Created_Date]
    ,[ClientHostName]
    FROM
    [dbo].[MN_DDLSchema_Changes_log]
    ORDER BY [EE_Time_Stamp] desc
    -- select getdate()
    -- ** DELETE EVENTS after logging into Physical table
    -- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
    -- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
    -- SELECT @XML
    SELECT GETDATE() GETDATE_5
    END
    GO
    Rajkumar Yelugu

    @@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
        May 14 2014 18:34:29
        Copyright (c) Microsoft Corporation
        Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    (1 row(s) affected)
    Compatibility level is set to 110 .
    One of the limitation states - XML columns with a depth of more than 128 nested nodes
    How do i verify this ? Thanks .
    Rajkumar Yelugu

  • BIB-16633 Cannot connect because the database version is incompatible with

    BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
    Reply
    why is this?
    oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
    at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
    at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
    at oracle.dss.connection.client.Connection.connect(Connection.java:425)
    at oracle.dss.connection.client.Connection.connect(Connection.java:342)
    at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
    at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
    at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
    at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
    at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
    at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Lisa Sherriff
    Posts: 137
    OTN Member Since: Jan, 2001
    Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
    Reply
    Hi,
    From the 10.1.2 BI Beans Install Guide it says:
    OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
    * Oracle9i Release 2 Enterprise Edition, as follows:
    o 9.2.0.6 for all platforms.
    o 9.2.0.5 with the latest OLAP patch for Windows-only.
    * Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
    From the error message it would appear that the Database is not one of the above.
    Thanks,
    Lisa
    JDev QA
    401488
    Posts: 48
    OTN Member Since: Aug, 2002
    Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
    Reply
    Hi,
    Please note that we have follwing versions of DB up and running:-
    1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
    With the Partitioning and Real Application Clusters options
    JServer Release 9.2.0.5.0 - Production
    Pls let us know the solution to resolve this problem ASAP.
    Thanks.

    You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
    10g - 10.1.0.3 with additional OLAP patch
    9i - 9205 with additional OLAP patch
    9i - 9206
    I would suggest that you have not applied all the required database patches to your instance.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oraclc Corporation

  • UDI-00018: Data Pump client is incompatible with database version 11.2.0.1

    Hi
    I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
    UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
    Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?

    AUTHSTATE=compat
    A__z=! LOGNAME
    CLASSPATH=/app/oracle/11.2.0/jlib:.
    HOME=/home/oracle
    LANG=C
    LC__FASTMSG=true
    LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
    LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
    LOCPATH=/usr/lib/nls/loc
    LOGIN=oracle
    LOGNAME=oracle
    MAIL=/usr/spool/mail/oracle
    MAILMSG=[YOU HAVE NEW MAIL]
    NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
    NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
    ODMDIR=/etc/objrepos
    ORACLE_BASE=/app/oracle
    ORACLE_HOME=/app/oracle/11.2.0
    ORACLE_SID=AMT6
    ORACLE_TERM=xterm
    ORA_NLS33=/app/oracle/11.2.0/nls/data
    PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
    PS1=nbsud01[$PWD]:($ORACLE_SID)>
    PWD=/nbsiar/nbimp
    SHELL=/usr/bin/ksh
    SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
    TERM=xterm
    TZ=Europe/London
    USER=oracle
    _=/usr/bin/env

Maybe you are looking for

  • Using a local Array in a Business Rule

    Newbie question here... I am writing a business rule that applies a standard rate to a lot of different lines in a business rule. This rate only varies by year, so from a logical perspective I think of it as a 1 dimensional variable. However the rate

  • Acrobat 7.0 Pro on Vista freezes when PDF from Multiple

    I try to create a PDF from multiple files and Acrobat just sits there looking stupid. I've checked for updates - Fully updated. It's from my CS2 Premium Professional edition. I have it installed on a Dell e1705 with Vista Home. Dual Processor, but st

  • CLIENT_OLE2 date formatting problem while reading from Excel

    I have installed webutil package and tested that everything works by running webutil_demo as well as WU_TEST_106 form. Then I had implemented reading from Excel sp. sheet using Oracle note 813535.1 (This note has OLE2 code sample on how to read an Ex

  • After Effects CS6 crashes on startup

    I have installed After Effects CS6 trial version 11.0.4 on Windows 7 (64bit) and it crashes on startup every time saying "After Effects error: Crash in progress. Last logged message was <16948> <ae.blitpipe> <2> making new context" I have a Nvidia 40

  • Prime Infrastructure - Google earth maps integration question

    Hello All, I am in doubt about a specific statement found in the P.I configuration guide: Adding an AP to Google Earth map without having the AP associated on a standard map, you do not see any heatmap when you view the AP in Google Earth. So, just t