Hyperion - Designer: Unknown error in OLAP process
We created OLAP Query using Hyperion Intelligence client - Designer.
While clicking the "Process" button it says "Unknown error in OLAP process".
Any clues on this?
Thanks in advance.
Hi Sanjeev
Thank you very much for your quick response.
Intially, we couldn't create an OCE file (using Designer) with Essbase as a data source & found out that we need client connectivity files which comes with Analytic client s/w.
We tried installing the Analytics client (aix version) using executable jar (setup.jar) in Windows XP but it was giving some exceptions.
But after installing Essbase Integration services (console), we could create the OCE files but end up with the issue that I've mentioned. I think the connectivity files even comes with EIS s/w with few other APIs but not all the APIs required for client.
Now we are trying to get the Windows version of Analytic client s/w. We've to try with this. I believe, most probably, this would resolve the issue.
Thank you again.
Similar Messages
-
Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please VoteHi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote -
When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019 -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am not able to run Report in Report viewer due to the below error:
Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer
This report works fine in SSRS tool. but after i deployed into sharepoint 2013 site, it throws error.
Please advise what needs to be done
Any help is really appreciated.
Thanks,
SPHi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Web Application Designer -Unknown Error Occured during Portal Communication
we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAMHello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran -
I get the following message soon after 120 seconds. Report query returns the full data set in SSMS withing 25 seconds.
This is a fairly a large report. I get this same error messages many of my large data reports.
Report server version 11.0.5058.0 on a VMware 2 GHz 4 core, 64GB RAM and Windows 2012 R2 (64 bit)
DB Server version Standard Edition (64-bit) 11.0.5058.0 on a VMware 2 GHz 8 core, 96GB RAM and Windows 2012 R2 (64 bit)
library!ReportServer_0-2!15ec!02/24/2015-14:29:07:: i INFO: Using folder C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\RSTempFiles for temporary files.
webserver!ReportServer_0-2!15ec!02/24/2015-14:29:17:: i INFO: Processed report. Report='/Head Office/UAE/RSH/Free Stock Report - Item wise', Stream=''
rshost!rshost!1404!02/24/2015-14:29:46:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1404!02/24/2015-14:29:46:: e ERROR: Failed with win32 error 0x03E3, pipeline=0x00000006101063B0.
rshost!rshost!1684!02/24/2015-14:29:46:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!1684!02/24/2015-14:29:46:: e ERROR: Failed with win32 error 0x03E3, pipeline=0x00000006101063B0.
httpruntime!ReportManager_0-1!1684!02/24/2015-14:29:46:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x800703E3): The I/O operation has been aborted because of either a thread exit or an application request. (Exception from HRESULT: 0x800703E3)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!1684!02/24/2015-14:29:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130692470239287110. ---> System.Runtime.InteropServices.COMException (0x800703E3): The I/O operation has been aborted because of either a thread exit or an application request. (Exception from HRESULT: 0x800703E3)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
I get the following error in visual studioHi Jinantha Perera,
According to the screenshot, when you preview the report, you got System.OutOfMemoryException error.
Based on the error message, this issue occurs when the computer does not have sufficient memory to complete the requested operation. In order to get rid of the problem, please refer to the following steps:
Add sufficient physical memory to the computer
Schedule reports to run at off-hours when memory constraints are lower
Adjust the MemoryLimit setting accordingly
(Note: When you render a report through the Reporting Services Web service, the Reporting Services Web service obtains the MemoryLimit setting from the Machine.config file. However, a scheduled report is rendered by the Report Server Windows service.
The Report Server Windows service obtains the MemoryLimit setting from the RSReportServer.config file)
Reporting services has a MemoryThreshold, which specifies a percentage ofWorkingSetMaximum that defines the boundary between high and medium pressure scenarios, if you rendering large amount records, you could also configure settings that control memory
allocation for the report server include WorkingSetMaximum, WorkingSetMinimum,MemorySafetyMargin, and MemoryThreshold. Configuration settings are specified in the RSReportServer.config file.
For more information about "System.OutOfMemoryException" error and Configuring Available Memory for Report Server, please refer to:
http://support.microsoft.com/kb/909678
https://msdn.microsoft.com/en-us/library/ms159206%28v=sql.110%29.aspx?f=255&MSPPError=-2147217396
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Unknown Error during Recovery - iPad no longer Recognized by iTunes
I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
ThanksHey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz -
Unknown Error when starting a MS Event
I am trying to view online the System Center Virtual Machine Manager (SCVMM) and System Center Operations Manager (SCOM) webcast. When I click on the link that was sent to me by MS after registering
for the event, I get the following error: "An unknown error occurred while processing your request. This is most likely due to a connection failure. Please try again."
Can someone tell me what I can do to view this?Check the workflow container (of the started workflow instance) and see if you spot a problem with one of the container objects used in your switch conditions.
-
Error during Export process to Hyperion Planning:
Hello All,
I am trying to load data to Hyperion Planning from EBS GL. I have completed the setup including setting up source, target, mappings, rules, etc. The import and validate process from EBS is working fine but export to Hyperion Planning fails right away. In my limited experience with FDMEE, I have not seen this error before and your help is greatly appreciated.
Here is an excerpt of error from FDMEE process details which is the same error shown in ODI. Everything before this process seems to be working. It seems like it is complaining about a host name but not sure which host name should I be looking at.
Environment: EBS12, FDMEE 11.1.2.3.520, Everything is on 64bit Linux
Error:
2015-01-14 08:53:25,578 DEBUG [AIF]: AIFUtil.callOdiServlet - START
2015-01-14 08:53:25,690 FATAL [AIF]: Error in CommData.loadData
Traceback (most recent call last):
File "<string>", line 4853, in loadData
File "<string>", line 1122, in callOdiServlet
File "__pyclasspath__/urllib2.py", line 124, in urlopen
File "__pyclasspath__/urllib2.py", line 387, in open
File "__pyclasspath__/urllib2.py", line 497, in http_response
File "__pyclasspath__/urllib2.py", line 425, in error
File "__pyclasspath__/urllib2.py", line 360, in _call_chain
File "__pyclasspath__/urllib2.py", line 506, in http_error_default
HTTPError: HTTP Error 504: Unknown Host
2015-01-14 08:53:25,691 DEBUG [AIF]: CommData.updateWorkflow - START
2015-01-14 08:53:25,691 DEBUG [AIF]:
UPDATE TLOGPROCESS
SET PROCESSENDTIME = CURRENT_TIMESTAMP
,PROCESSSTATUS = 32
,PROCESSENTLOAD = 0
,PROCESSENTLOADNOTE = 'Load Error'
WHERE PARTITIONKEY = 3 AND CATKEY = 1 AND PERIODKEY = '2011-04-30' AND RULE_ID = 24
2015-01-14 08:53:25,692 DEBUG [AIF]: CommData.updateWorkflow - END
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeScript - START
2015-01-14 08:53:25,692 DEBUG [AIF]: The following script does not exist: /u01/fdmee_app/ALPLAN/data/scripts/event/AftLoad.py
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeVBScript - START
2015-01-14 08:53:25,693 DEBUG [AIF]: The following script does not exist: \u01\fdmee_app\ALPLAN\data\scripts\event\AftLoad.vbs
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeVBScript - END
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeScript - END
2015-01-14 08:53:25,746 DEBUG [AIF]: Comm.finalizeProcess - START
2015-01-14 08:53:25,747 DEBUG [AIF]: CommData.updateRuleStatus - START
2015-01-14 08:53:25,747 DEBUG [AIF]:
UPDATE AIF_BALANCE_RULES
SET STATUS = CASE 'FAILED'
WHEN 'SUCCESS' THEN
CASE (
SELECT COUNT(*)
FROM AIF_PROCESS_DETAILS pd
WHERE pd.PROCESS_ID = 173
AND pd.STATUS IN ('FAILED','WARNING')
WHEN 0 THEN 'SUCCESS'
ELSE (
SELECT MIN(pd.STATUS)
FROM AIF_PROCESS_DETAILS pd
WHERE pd.PROCESS_ID = 173
AND pd.STATUS IN ('FAILED','WARNING')
END
ELSE 'FAILED'
END
WHERE RULE_ID = 24
2015-01-14 08:53:25,748 DEBUG [AIF]: CommData.updateRuleStatus - END
2015-01-14 08:53:25,749 FATAL [AIF]: Error in COMM Load Data
2015-01-14 08:53:25,749 DEBUG [AIF]: Comm.updateProcess - START
2015-01-14 08:53:25,751 DEBUG [AIF]: Comm.updateProcess - END
2015-01-14 08:53:25,752 DEBUG [AIF]: The fdmAPI connection has been closed.
2015-01-14 08:53:25,753 INFO [AIF]: FDMEE Process End, Process ID: 173Yes it does. I was able to connect with planning and can see all planning dimensions in FDMEE. In this instance, everything is installed on the same box so it better be resolving the host
-
My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says iphone "iphone" could not be restored. unknown error code (-1). There is not a -1 code on the list and I have tried most of the suggestions.
Does my sim card need to be in when I am doing this? And any other suggestions?I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
PLEASE HELP!!!
I am using an HP DV9 laptop running Windows 7 Home Premium and the latest iTunes software.
I regularly synch my iphone 4S with my laptop & Outlook.
I recently got the message that an IOS6 upgrade is available & so I scheduled to apply the update.
Everything was running normally when, after the download of the update, backup of my iphone, & applying the update began when
suddenly, iTunes returned with an ERROR MESSAGE as follows:
The iPhone "Ramon's iPhone" could not be updated. An unknown error occurred (1602)
Now, my iphone is stuck with the iTunes icon and the USB image with an arrow pointing to the iTunes
icon.
WHAT DO I DO NOW?????!!!!!
Help PLEASE!!!!I actually tried the steps below due to the error -5000 I had encountered during the previous tries updating my IOS to 5.1.1
"Perform a normal sync and check your iTunes to make sure everything was synced in the right places like the tabs at the top of your "summary" when you plug in your iPhone to iTunes. If everything is there and all the right boxes are checked for the stuff you want to save, then put your phone into recovery mode by keeping it plugged into your computer with iTunes still up and running. Next you want hold down the power button AND the home key button (the big button on the bottom part of your screen) AT THE SAME TIME. Your phone will go thru 4 different screens before you
Can let them go. U will see your normal power off slider screen, then a black screen, then a black screen with an apple logo, then finally a screen with the iTunes logo and a picture of a sync cable below it. Once you see this screen LET BOTH BUTTONS GO but not before you see this screen. Your computer will tell you that it has detected an iPhone in recovery mode, say ok. Then hit the restore button on your iTunes summary screen, it should then ask you if you want to restore from a backup and update, say yes.... And at the end of its restoring and uploading you should have iOS 5!!"
Then it proceeded to a reactivation process... =( -
I keep getting the message unknown error (13019) I uploaded the upgrade for I tunes and bought some music and that went ok but when I went to sync it everything goes ok till the end and I get the error message .I took I tunes off the comuter and re downloaded it ,but the process is the same
Did you try all the suggestions mentioned in this article? iTunes Error 13019 during sync
Some users solved the problem by removing duplicate songs: https://discussions.apple.com/message/17047386#17047386 -
Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
"An unknown error occurred while trying to start the collection process."
I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.Hi,
This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
and Team Foundation Server.
You have problems when using Concurrency Visualizer Extension, please ask in
the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.
I have dropped and recreated a fact table to refresh the data as the table is having identity columns. So not able to directly insert data. After that cube is throwing above error.
Please suggest.Hi Md,
It hard to analyse the issue base on the limited information, Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error. Please provide us the detail information about it, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support
Maybe you are looking for
-
My HP Photosmart Premium C309-m will scan and copy but it won't print, always says ERROR
My HP Photosmart Premium C309-m will scan and copy but it won't print, from a computer file. It always says ERROR
-
please help me guys, and thank's in advance for the help..
-
If I open the Launchpad and start to move between its pages, Launchpad loses its smoothness after 4-5 scrolling between its pages. I thought it was because the new update, but just do not notice it before. The more icons, the more noticeable slowdown
-
Feature NUMAP - MOLGA as decision field
I need use MOLGA as decision field for the feature NUMAP, but it always goes to the other node of this feature. Any idea why this is happening? How is the value of Molga determined for an applicant?
-
I had my I phone 4s replaced today at the Apple store. I previously backed it up on ICloud. I'm downloading from ICloud to the new phone. The pictures have been stuck on number 215 for an hour now. I've turned the phone off and on several times, but