Hyperion EAS without a repository? Is it possible?

Hi-
I have a question, I hope there is anyone that can give me insights on how this works. I just recently got "close" with this new servers, where it seems like it doesn't have any repository at all for hyperion eas.
The facts are:
1. Essbase and EAS installed
2. At the configuration panel, I see the "pending" mark for EAS database configuration
3. EAS application server was configured using Tomcat
4. When I look at the properties for the EAS server at console, I can see the JDBC used is Oracle, but I am hvaing difficulties tracking where is this oracle database -if exists- hosted
Now, my question is, can we make EAS run as normal just by configuring EAS application server without a repository database?
I had read eas documentation -up and down-, there is nowhere stated if we must have a repository for eas, but the doc explicitly shows us step by step configuring the database for eas. I browsed and read that the repository for eas is for log analyzer, is that means i can just forget about the repository as I don't need log analyzer? or there is any other feature that won't works without the repository?
In the end, what I really need is just an answer whether EAS can run without repository. Thanks for anyone!
D.

Well, it's not about cost (I think!), I have a production server which installed and configured by someone else and a development which only installed and configured half way by this someone else, I have no idea why he/she did it this way and I will never know!
Now, the idea is to mimic whatever settings we have in production and put it in development (with or without a repository), because now the practice is a little bit odd, the developer or admin will use the eas directly in production instread of testing it first in development because they don't have one. So, one eas server connected to both production and development essbase in which the eas located at the production, so if this breaks I am screwed!
However, I think I found the answer, I tried to install essbase server and eas just now in another computer, and configured essbase server and deploy only eas application server without configuring eas database, and it's actually work, I did a quick test e.g. outline, simple script, rule files, basically most administration works and all of those work fine, again there is no documentation in hyperions stating what are the features that is not working without a reposiotry so I just prepare myself when some menusgrayed out or breaks!. I didnt test whether the log analyzer works or not, but in my laptop which is fully configured the log analyzer works.
Remember when I wrote, in the properties of production eas server the JDBC used was oracle? Well, its the same in this new instance I just installed, so if I didn't configure a database for my eas then the JDBC will be set to oracle and it will use Oracle JDBC database connection, why? I have no idea. I found this setting as a misleading information.
I pretty much got my answer that eas can works without a repo, but I will just put this as unanswered if someone could tell me or whomever read this thread a little bit more about this strange configuration or what features won't work in eas.
I learnt something new today!
Cheers!
D.

Similar Messages

  • Can u deisgn Integration scenario without Integration repository?

    Hello,
    Is it possible to design an Integration scenario to without Integration repository(without creating any repository objects)?
    if yes, How do we do that?
    regards,
    haritha
    [email protected]

    Haritha,
    Do u mean the Integration Scenario <b>Object</b> in XI? I think we can't create Integration Scenario Object without IR. More over u have to create Integration scenario itself in IR only right?
    Or u mean that u want to create some scenario's without IR object. If yes then its definitely possible.
    Can u clarify which one u refer here.
    raj.

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • EAS with 2 admin servers? possible

    helllo,
    i have added 2 essbase servers
    1. local host( my essbase server)
    2. My work (company)
    but what i meant is now .. i able to add both the servers in Administration servers but is there any possibility to open both in same EAS.. because when i open local host iam not able to open My work (company ) for that i need to open new EAS again ..is there any possibility for both servers as local host is installed in my PC and my work is installed in another location
    i hope i made my self clear ..if not please do drop ur comments

    yes you can expand them both if you have added them? remember there is a difference between EAS server and Essbase server. Add 1 EAS/Administration server and 2 Essbase servers.
    hopefully we're talking about the same thing
    what exactly are you trying to achieve? (what do you want to be able to do with 2 servers)

  • Send mail with attached file without using Repository

    Hello,
    I want to know if have a way to Send mail with attached file without using Repository.
    Regards
    Elad

    Elad,
    Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
    For how to proceed without integration repository content look into this blog,
    <a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
    Combining these 2 you have the solution.
    Regards
    Bhavesh

  • I want to copy my iTunes library onto my iPhone without iCloud. Is this possible? In past you could drop & drag upon syncing....now only download via iCloud?

    i want to copy my iTunes library onto my iPhone without iCloud. Is this possible? In past you could drop & drag upon syncing....now only download via iCloud?

    So what is stopping you?
    Do you have manually manage video and music set up?

  • Data retrieval imac without a separate hard drive possible?

    Is it possible to retrieve imac accidentally deleted data without a separate hard drive?

    If you have not emptied the trash it is. Othewise probably not, you should be creating some type of backup, becuase you are using an older version of OS X (10.5.11) your best bet is to get an external HD and begin backing up using SuperDuper! or Carbon Copy Cloner.

  • 802.1x *without* encryption. Is it possible ?

    Hi,
    I have a ACU Client, WLC (with local EAP) and an external RADIUS server.
    My aim is to use 802.1x, but WITHOUT encryption.
    In the Cisco ACU, when I select 802.1x, I have to select an EAP type.
        With EAP-FAST, selected,
          On the WLC, if I enable local EAP, and  select WEP with No key size, it does not work.
          I have to select a Key size, therebye enabling WEP
             I believe this is because EAP-FAST *MANDATES* usign WEP or a 4 way handshake..
    A. If I select other EAP types, and setup my authentication server (Free RADIUS) to support the EAP type,
        can I have a setup that can NOT use encryption ?
              On the WLC, do I just select 802.1x and a WAP key with 0 size ?
    B. Is this not possible with any form of Local EAP ??
    Thanks

    Hi George,
    Thats actually one of the first things I had tried, but it does not seem to work.
    I repeated the test again, but this time with a sniffer running.
                I see the open auth/association go through, but it never proceeds to 802.1x (However this was with a all mixed cell flag on)
                Without that flag set, I dont see any packets from the client, except probe requests !!
    On the controller, I was also running a debug aaa enable all, and dont see any activity, in both the above cases.
    The moment I set the WEP key length from NONE to 104 bits, it works
    I'll try with other clients, but I believe the result will be the same.
    Also, this is just to get a better understanding of the behaviour of 802.1x.. Not for production.

  • JClient apps without App Server, is this possible?

    Is it possible to run JClient (using Swing components) applications without an application server (like iAS)?

    Rob - the on line help would be a good place to learn about this.
    Try the section "Ways to Deploy J2EE Applications" and the Jclient stuff is in "Deploying JClient and BC4J as a Simple Archive"
    Regards
    Grant Ronald
    Product Management

  • EAS without Shared Services

    Hi Guys,
    in former Essbase 11 and Essbase 9 Versions it was possible to remove the shared services authentication by modifing the OlapAdmin.properties file.
    After an successfull 11.1.2.0 installation I can't find that file anymore.
    Does anybody know of another way to bring EAS back to native security mode in version 11.1.2.0?
    Thank you very much!
    Best Regards
    Thomas

    Hi,
    It may be stored in the shared services registry.
    You can export property, update and then import back in using LCM
    Log into HSS, expand application groups > Foundation > Deployment Metadata
    Expand Shared Services Registry > Essbase > LWA -eas@... Tick properties
    Run the migration and will create a files in
    Oracle\Middleware\user_projects\epmsystem1\import_export\admin@Native Directory\EAS\resource\Shared Services Registry\Essbase\LWA - eas....
    Have a look in the property files generated see if it is in there.
    I have not tried this by the way, Oracle may have changed to force to use shared services mode now, if I get a chance I will look into it further unless somebody else knows the exact location.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • MRU without Checksum? Is it possible?

    Hi,
    I have a MRU-Process in my form. Before that I do some DML on that table. Now, when the MRU-Process starts I got the checksum error (version has changed blblbl...) - I don't need these checksum lookup because I use a temporary table in this session.
    Is it possible to use a MRU-process without the checksum mechanism?
    Bye,
    Jens

    The builtin Automatic Row Fetch process computes and stores the checksums for each row in hidden items. The builtin MRU process compares these checksums for each row before writing it to the database to prevent "lost updates".
    I am not sure what you mean by "I do some DML on that table", but if this DML modifies the underlying data such that after-submit checksums no longer match what the MRU process expects, it will throw the error.
    Is it possible to use a MRU-process without the checksum mechanism?No, if you use the builtin MRU process, the checksum feature comes with it.
    Thanks

  • BAPI_ALM_ORDER_MAINTAIN - Without operation. Is it possible ??

    Hello ,
    I'm creating an order via bapi BAPI_ALM_ORDER_MAINTAIN with 1 operation.
    It run perfectly.
    Now I need to create the order without operation.
    On the program, if I delete the parts to create the operation,  the bapi return an error:
    so my question is:
    do you know some parameter to pass at bapi to create the order without operation ??
    is it possible ?
    thank you.
    R

    Hello,
    the error is:
    1 E IWO_BAPI     162 162 Order &1 cannot be put in process, as no operation is maintained     
    the merhod table id:

  • ESS Detailed error format without DevelopmentMode set to true - Possible?

    Hi fellow forum members,
    When we enter the mobile phone number in the wrong format in the communication data in ESS, we get a nice error message that the format is indeed wrong. This is shown correctly on our DEV system. This is because in Visual Admin the DevelopmentMode is set to true.
    In our QA system, the DevelopmentMode is set to false, because we want no large traces in our Portal during testing. However, we do want the detailed description (for example "Mobiel nummer dient altijd te beginnen met "00316" in the red box on the screenshot) to show up. This is not shown when we disable DevelopmentMode.
    How can we make settings that this detail is shown, but we get no large dev trace in our Portal?
    Screenshot:
    http://tweakers.net/ext/f/9c39e6a0ff7dddcc19c2898e17ee5ec8/full.jpg
    The message in the red box is what we want to show, but without the extended dev trace. Is this possible and how do we do it? Thanks in advance!
    Best regards,
    Jan Laros

    Hi Jan,
    Long time ago, but did you ever manage to fix this?
    I'm facing the same problem - don't want the java dump but do want the useful part of the message.
    Regards,
    Pieter Verlet

  • Set up new sales org/plant but without using Finance - is this possible?

    Hi,
    I was asked if the following is possible.
    Set up a new sales org/plant but without using Finance.
    It should be possible to create purchase order with goods in
    and sales orders with delivery and goods issue.
    But the invoice will be done in an external system.
    So, all what has to do with finance will be done in an external system
    also the goods in/goods out values.
    So the stock and stock movements should be visible in SAP, but the values for this stock
    will be posted in the external system manually.
    So the question is: Is it possible to set up a new sales org/plant
    but without using Finance?
    Thanks
    Regarfds
    Dieter

    Hi,
    really nobody has a hint?
    Most important: the stock movements should only consider only quantity no values?
    Isn´t there any way to say for a certain material it only consider quantities but no values?
    Regards
    Dieter

  • Cross Domain without an app is it possible?

    is it possible to make a cross domain call using javascript in SharePoint 2013? Please note that building a SharePoint hosted app is not an option for me. I just need to add a content editor webpart and make a call to List on site A from Site B. 
    Please help,

    Hi,
    For making a cross domain call in SharePoint, you can refer to the methods as below:
    Create Cross-Domain Proxy Page for Client-Side Scripts:
    http://www.sharepointjohn.com/sharepoint-2010-cross-domain-proxy-page-for-client-side-scripts/
    Enable cross domain call in web service Application:
    http://www.adobe.com/devnet/adobe-media-server/articles/cross-domain-xml-for-streaming.html
    For more information, you can refer to the thread:
    https://social.technet.microsoft.com/Forums/en-US/fc2dd1bf-9ac2-4f15-b521-626d06c2524b/cross-site-collection-rest-call-without-an-app?forum=sharepointdevelopment
    http://stackoverflow.com/questions/9469980/sharepoint-getlistitems-across-domain?rq=1
    http://stackoverflow.com/questions/9573790/cross-subdomain-sharepoint-list-access?rq=1
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

Maybe you are looking for