Hyperion Enterprise 6.3 Installation errror

We have installed Hyperion 6.3 on a new server. The software runs on the server. Users accessing it through a shared network drive get the error "The specified module could not be found", and data entry is locked in all categories. We have duplicated the security settings from the old to the new server but this has not helped. Does anyone have any suggestions?

6.3 ??? This probably has to do with some MSFT patches applied. I have seen where there can be conflicts. What is the O/S? Are you certain they are parallel in terms of fixes that may have been applied?
I think your bigger issue is that 6.4 was released in 2005.
I would strongly recommend moving to a more recent release if you can help it. I believe 6.5.1 is the current release.

Similar Messages

Hyperion Enterprise 6.3.1 (old version) installation

Hi,
I need to install the Hyperion Enterprise 6.3.1 (an old version). If someone can pointout to any installation and configuration document or reference material that would be really appreciated.
Thanks
-Samar-

Hi,
I did an old install using version 5.1 My install was in the folllowing folder path from Hyperion
\Software\Hyperion Install\English\DISK1 Then just followed the setup.exe file and walked through the prompts.
Thanks,
Azmat Bhatti

Hyperion Enterprise web error

Hi ,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hi Rakesh - looks like you opened a new thread. (not sure which one is active so I've posted to both. I'll look for a reply on both. Cheers. -David),
Hyperion Enterprise Reporting 6.5 is NOT supported on MS Windows 2008 server.
Hyperion Enterprise Reporting 6.5.1 is supported.
Could you please verify your version of Hyperion Enterprise Reporting (again)?
Please also verify the other components of your build against your version at the following link:
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
(See Hyperion Enterprise 6.5.1 (XLS) or Hyperion Enterprise 6.5 (XLS) depending on your version)
Also can you confirm you performed the following steps during your installation of Hyperion Enterprise Reporting?:
Applies to:
Hyperion Enterprise Reporting - Version: 6.3.1.0.00 to 6.5.1.0.00 - Release: 6.3 to 6.5
Information in this document applies to any platform.
Purpose:
Configuring Hyperion Enterprise Reporting Web.
Questions and Answers
How to Configure Hyperion Enterprise Reporting Web?
1. Create LOCAL username and password with Administrator rights. This is your impersonation account.
You may use the local administrator as your impersonation account, but it MUST be local, not a domain admin.
2. Users IWAM..., IUSER... SYSTEM, INTERACTIVE, Administrator and Everyone are automatically created users/groups.
In Local Security Settings -> Local Policies -> User Rights Assignment.
Add the add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, Impersonation account and Everyone to:
a) Act as part of the Operating System.
b) Log on locally (or Allow log on locally).
c) Log on as a service.
d) Log on as a batch job.
3. In IIS services <server>
Web Sites -> Default Web Site -> Right click on HSpider -> properties
Virtual Directory tab.
Select only Log visits and Index this resource.
Application name: HER.
Execute Permissions: Scripts and Executables .
Application Protection: High.
Directory Security tab.
Deselect all except Basic Authentication .
(Windows 2003) Web Service Extension .
Select All Unknown ISAPI Extensions.
Click the Allow button.
Repeat with all other items starting with HER and Active Server Pages.
4. In Component Services -> Computer ->
a) Right click on My Computer -> Properties.
b) Default security tab (COM security tab).
c) Access Permissions Edit Default button.
d) Add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, and Impersonation account.
e) Launch and Activate permissions Edit Default button.
f) Add IUSR, IWAM, SYSTEM, INTERACTIVE, Administrator, and Impersonation account.
5. My Computer -> Com+
a) IIS... HSpider properties -> Identity tab.
b) Browse to impersonation account and add password.
6. My Computer ->DCOM Config (or Start-> Run -> DCOMCNFG).
a) Right click HypPkgrH_Pooler -> Properties -> Identity tab.
b) Browse to impersonation account and add password.
c) Repeat with Spider_Pooler.
7. Internet services must be reset (Start -> Run -> iisreset).
8. In the Hyperion Enterprise Reporting folder of the Start menu, select Web Server administration
Program.
Options button.
Network tab.
Select Allow Hyperion Enterprise Reporting Web Server to access other network devices.
Add the impersonation account and password.
If desired, select the Preload tab and add your application.
System is Enterprise6 as found in the repeng.ini.
If using Distributed Retrieve or Schedules
9. In the Hyperion Enterprise Reporting folder of the Start menu, select Distributed Server Manager
a) Network tab
b) Select Allow client to access other network devices
c) Add the impersonation user and password
If you have any questions about these steps please don't hesitate to drop me a note and I'll do my best to explain what is required.
G'Luck,
-David

Hyperion Enterprise web error message

Hi,
I am using Hyperion Enterprise 6.5 version, When i tried to enable web version of Hyperion enterprise web by browsing http:\\localhost\Heweb from the server
Server Error in '/HEWeb' Application.
Module not found:he.hecontainer
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 338: ' Get the application list
Line 339:
Line 340: vtStatusCode = Application("EntAppObject").EnumAppsForLogon(vtAppListXML, vtStatusDesc)
Line 341:
Line 342: Dim domXML
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx Line: 340
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.logonmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx:340
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3601

Hi Rakesh,
1.) Please confirm you followed the steps below during your HEWEB initialization process? (The first time you enable HEWEB - the applications added need a long time to cache depending on their complexity.)
*How to Prevent Hyperion Entperise Web Components from Timing out and Dropping from Memory on HEWEB Server [ID 1134663.1]*
Modified 03-AUG-2010 Type HOWTO Status PUBLISHED
Applies to:
Hyperion Enterprise - Version: 6.5.0.0.00 and later [Release: 6.5 and later ]
Information in this document applies to any platform.
Goal:
What steps are required to prevent an application loaded into HEWEB from timing out and dropping from memory thus requiring users to wait for the application to re-load whilst the connect?
Solution:
In order to use Hyperion Enterprise Web (HEWEB) and Hyperion Smartview for Enterprise (HSE) the application you wish to connect to needs to be Enabled for HEWEB on the designated HEWEB server.
To enable an Application for HEWEB the designated HEWEB Server needs to have Microsoft Internet Information Server (MIIS) and ASP.NET installed.
If the HWEB component has never been installed, the Enterprise Installer needs to be run selecting the HEWEB option on the Install component list. Once selected and run the install. This will install the required version of HEWEB and ASP.NET.
If the HEWEB server has been installed, in order to Web Enable the application(s) required follow the steps below:
1.Login to Enterprise as a user with Admin Rights.
2. Enter the Application Module from the Enterprise Desktop.
3. Choose the Navigate menu followed by Server Administration.
4. In the Web Server pane select the Enabled check box.
Set the Web Server URL to read http://YOUR SERVERNAME.
Set the Session Manager, task Server and Web Application Controller to be just the server name.
Set the upload location to be a suitable folder on the server in which to store dataload files.
5. If using Hyperion Enterprise Reporting Web (HERW) as well as HEWEB:
Set the Server name for your HERW server in the Hyperion Enterprise Reporting Web Server.
6. Leave the number of connections set to 12.
7. Once these parameters are all set. Hit Apply.
Depending on your application size and complexity of your metadata, after a delay, three processes will start up and consume memory and CPU. These are HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE. The time taken is a function of application metadata complexity and NOT the amount of data within the application.
Once the HeAppController.EXE has settles to 0% CPU utilization and the process memory usage has stopped increasing the application has loaded into HEWEB and should be visible in the list of applications when you hit the link http://YOURSERVERNAME/HeWeb/default.asp from a browser.
If the application takes a very long time to load, the amount of time can be reduced with no adverse affect by editing the Applicationname.ini located in the application folder to include the line ENABLECACHEFORSMARTVIEW=”0” towards the end of the file.
After some time these 3 processes, HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE will drop from memory and if the line WEBAUTOSTART=1 is set in your server Hypent.ini file, these processes will re-load when a user hits the HEWEB server via a browser or makes a Smartview Connection attempt.
Note if the load process for your application takes a long time, the first users to hit the server will have to wait while the processes re-load.
This can cause user confusion and lead users to think the server is down!
To prevent these processes dropping from memory perform the following steps on your HEWEB server:
1. From the Start Run command run INETMGR to bring up Microsoft Internet Information Manager Console.
2. Identify the Default Application Pool in the left hand pane by drilling down into Application Pools.
3. Right Click on the Default Application Pool and select properties.
4. Find the re-cycling TAG and edit the value in Recycle work processes in minutes to a long period i.e. 28800 (20 days).
5. Find the Performance Tag.
6. DESELECT, Shutdown worker processes after being idle for (time in minutes).
7. Exit from the Web pools setting and close down INETMGR.
8. From the start button re-set IIS services by issuing the command IISRESET from the run box.
9. IIS will now re-start and then once initially called the process for HEWEB should not remain in memory for the duration of the period specified.
Note: Be wary of taking back-ups while the webserver connection are held open. It is advised that the internal Enterprise back-ups are used which will not be affected by the HEWEB process remaining active.
2.) In your previous post you mentioned that you followed all of the installation steps required for installing HE 6.5.1. Could you please confirm that this was a new installation? Or was this an upgrade from an older version?
Let me know how you get on.
G'Luck,
-David

Help on Migration from Hyperion Enterprise 6.5.0 to HFM 11.1

Hello All,
We are planning to upgrade our system from Hyperion Enterprise 6.5.0 to HFM 11.1 and would be very grateful if you can help us in answering the below questions as I am novice in Hyperion.
Current Environment:
We have one Hyperion Enterprise 6.5.0 server and Hyperion 6.5 client is installed on two Citrix servers. We use Citrix servers to publish Hyperion client which users can use to access the Hyperion application. I have been planning the Citrix upgrade for Citrix servers and due Hyperion 6.5 incompatibility with Win2008 R2, we are also planning to do Hyperion upgrade to either 6.5.1 or to HFM.
Having no knowledge on HFM, I found out that HFM is web-based application and users can access HFM application through browser unlike Hyperion 6.5 which is accessed by Hyperion client.
I have following question if you can help me, please:
1. Do we need any client to access HFM or all the feature are web based?
2. If it is web-based, do we need any web-server or IIS can be used to provide access to HFM application to users?
3. How many servers (application, web-server, database server etc) would be suffice for 270 users, any estimate?
My questions might be very dumb for this forum but, I would really appreciate and thank any kind of help provided.
Thanks,
Rajneesh

You should not proceed without expertise in HFM. The installation and configuration requires a much greater technical knowledge and support than Hyperion Enterprise does. Also, you should not perform a straight migration of Hyperion Enterprise to HFM since you have to consider the differences in dimensionality. I recommend you engage someone who has already done such a migration and has good experience with HFM.
--Chris

Hyperion enterprise

Hi,
i am new with hyperion enterprise working on HE 6.5.1.100
I have installed HE 6..5.1.1 Now i want to create some applications for it
I want details information for application and its creation process.
What will be databases and storage of app data all details about it.
Product Installation listings :-Hyperion Allocations ,Hyperion LedgerLink,sce,Hyperion Retrieve ,Hyperion AutoPilot,
Application Conversion SE to 6.5.1.1.000 Conversion Wizard, etc..
So please reply soon
Thanks,
Regards
RP

for the detail balances, you could try line item detail, but it looks like more trouble than it is worth.
To store rates, you will need to setup stat accounts to hold that info.
To apply rates to balances, the rates will need to be entered at corresponding POVs. For example, you could create a set of Custom4 members for each aging bucket (Cur, 30, 60, 90). When the dollars come from SAP they would have to be sorted and placed in these buckets. The interest rates would need to be stored in buckets also. Then you could multiply all the rates by all of the balances.

Does anyone know Hyperion Enterprise Reporting 6.4.1.1? This was installed before i got to my current location. When I try to start it I get an error "repeng32.dll" error.

This was installed before i got to my current location. When I try to start it I get an error "repeng32.dll" error.

Sounds like an issue with the current installation. May need to uninstall/reinstall. Hyperion Enterprise Reporting has a seperate installer than that for just Hyperion Enterprise so it's possible that the reporting component isn't even installed.

Hyperion Enterprise 6.0.2 and virus scanners

Hello together,
next month our IT-Department will change the virus scanners at our hyperion enterprise server.
Can someone please tell me what we need to consider?
May be some files are not scanned? Specially configurations?
For your help in advance thank you.
Greetings from
Martin

Hi Martin,
Please check the below mentioned Knowledge article found on Oracle knoweledge base.
Hyperion Enterprise: List of Settings and Recommendations to Avoid Corruption (Doc ID 588620.1)
Seems that you are in very old version of Enterprise. Download the latest version 6.5.1.1 (Maintenance Release) a full installation could be performed though, which comes with Backup utility and Enterprise Extraction utility where you could convert or migrate the Enterprise application to HFM application.
Below are the links where you could find the documentation.
http://docs.oracle.com/cd/E12379_01/welcome.html
Hope this helps,
Thank you,
Charles Babu J

Hyperion Enterprise 4.0 docs???

Hello frndz,
Can any one please provide me hyperion enterprise 4.0 pdfs or any related links or docs please??
Thanx

I have all the installation files, product docs and read me files for Hyperion Enterprise Release 5.1.
Would these help? If you posted me your email address I could make them available to you for download.
I thought I had Enterprise 4 around here somewhere. If I find it I'll certainly post another note.
Regards,
David

Hyperion Enterprise or GCS?

We are currently running Hyperion Enterprise and we are also involved in an Oracle ERP build. Included in our purchase was the Global Consolidation System (GCS) and some of my piers contend that we should move to GCS for several reasons (self contained consolidations being the biggest one). I content that Hyperion Enterprise is a better solution than GCS on many levels, but I was hoping to get some expert opinions on the choice and which you feel is better.
Thank You

I have all the installation files, product docs and read me files for Hyperion Enterprise Release 5.1.
Would these help? If you posted me your email address I could make them available to you for download.
I thought I had Enterprise 4 around here somewhere. If I find it I'll certainly post another note.
Regards,
David

Hyperion Enterprise client and server version

All,
We are using Hyperion Enterprise version 6.1 for a long time and currently it supports and works fine on windows 2000 server. We are planning to move to HFM shortly but in the meantime i wanted to see if there is a version out there between 6.1 and 6.5 that will enable us to install client on "xp" and still talk to version 6.1 on the server?
any help would be appreciated.
Thanks
Srikanth

Rk,
Thank you for the response. Do you happen to know which version of Hyperion retrieve on the client side works with xp and still be able to talk to version 6.1 on the server side. I looked into the version 6.5 and it does not support version 6.1 on the server side.
Also, where can i find the installs for older version i looked in the edelivery site and have not been successful.
Thanks again,
Srikanth
Edited by: vemulasri on Jul 28, 2009 10:41 AM

Hyperion Enterprise Web error when trying to do application setup

Hi David,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hello,
I believe you posted your query to the wrong forum. I would suggest you review the classifications for which forum to post the query. This assist other users by following the guidelines:
Financial Consolidation
Covers Hyperion Financial Management, Hyperion Enterprise, and respective administration/development topics
Financial Data Management
Covers Hyperion Financial Data Quality Management, Hyperion Data Relationship Management (formerly Hyperion MDM), and respective administration/development topics
So in essence; please repost your query to Financial Consolidation.
Thank you,

Hyperion Enterprise Web Server - Error 406

Hi,
The problem occurs when trying to activate the Hyperion Enterprise webserver from the Server Administration. The error message displays "HTTP 406 error".
We have tried many things including a full reinstall but have not managed to find a solution or pin point what's causing the problem.
Has anybody experienced this issue before or have any suggestions as to why this is happening.
Thanks

Does anyone have a solution to this error? We are seeing the same.
The Web service is running fine and we can try to enable the application from either Server Administration application or selecting application setup from the web login screen.
The Server Admin application returns the error HTTP 406 : The resource cannot be displayed. When trying to enable the application for web access.
The Web server application setup shows no applications within the application dropdown selection control.
Tried using alternative applications, all of which appear to working perfectly OK other than not being web enabled.

Decimal Places in Hyperion Enterprise

Since upgrading to Hyperion Enterprise 6.5.1, we have lost the ability to see any values beyond the decimal point. I can go to View and select decimal places, but it used to appear in the bottom right corner of the Data Entry screen as Value: 7195.1548869 now all I get is Value:7195
Does anyone know how to get that Value to show all the decimal places?

Hello,
During operation, you must neither delete currencies used nor change their definition of decimal places. Amounts in posted documents could become invalid or incorrect as a result.
You cannot subsequently use R/3 standard functions to make a consistent change to the number of decimal places of a currency in the R/3 system that is already operatively used because the system interprets all amount values on the database according to the number of decimal places of the reference currency that is stored in the system.
Prase

Best practice to extract data from Hyperion Enterprise 5.5

We are looking into extracting high-level data from our Hyperion Enterprise 5.5 and am in the process of researching what are the best practices to do that. I am reading the docs for the APIs that I can call from VB6. I am also interested if there are available Java APIs out there.Thanks in advance and Happy Holidays to everyone!Angelito [email protected]

The easiest is using HAL (Hyperion Application Link). I have used HAL to extract data, organizations, account, subs, entities, etc.

Hyperion Enterprise 6.3 Installation errror

Similar Messages

Maybe you are looking for