Hyperion ERP Integrator 11.1.2.1 and ODI

Hi,
We have setup EPM 11.1.2.1 on a distributed Environment
Machine A - Web Tier Components (Foundation,HFM,Reporting and Analysis,FDQM)
Machine B - Services Tier Components(Foundation,HFM,Reporting and Analysis,FDQM)
Now I would need to have the ERP Integrator talk with Peoplesoft and to do it I would need ODI. So When I try to Install ODI 11.1.1.6 in Machine B, the weblogic (that gets installed during EPM 11.1.2.1) in machine B is 10.3.4 and is not compatible with ODI 11.1.1.6(which needs weblogic 10.3.5 or more).
While I have raised an SR for the same. If any of you have come across such a situation,kindly share your experience/suggestions.
Regards,
Leo jose.

Thanks for your valuable inputs and time.
I just spoke with Oracle Support and they had communicated that, EPM 11.1.2.1 is not compatible with ODI 11.1.1.6. ODI 11.1.1.5 is the only compatible version with 11.1.2.1 and they say their customers were sucessfull doing the installation(but then again 11.1.1.5 uses weblogic 10.3.5).I am going to give it a try.
First question would be are you going to use the J2EE components with ODI, if not then you don't even need WebLogic - I am just trying to understand the need of J2EE components for using ERPi+ODI pull data from PeopleSoft.
Is it advisable to install WebLogic 10.3.5 to a separate location? Will it not create an impact on the existing EPM environment.Also please note that, we have deployed all the application in Machine A and Machine B is going to have ODI.I think this should be my solution, if yes.
I know that 11.1.2.2 upgrades Weblogic to 10.3.6 - We are unable to find the 11.1.2.2 setup files in E-Delivery.
Thanks again,
Leo Jose.

Similar Messages

  • Hyperion ERP Integrator training?

    I was browsing through the Oracle training courses available in the realm of data integration, specifically FDM's ERPI and was unable to locate anything. Does any such training exist? Or because it is a module/adapter of FDM there is no such specific training outside of the FDM training itself?

    An Oracle training does not currently exist. ERPi uses ODI & FDM. You may consider the former if you are looking to get into the more technical aspects. If you are looking for more functional, you might want to consider contacting an implementation partner to design a course for your organization.

  • FDM and ERP Integrator Module

    I am trying to select the correct ledger from the Oracle E-Business Suite. Within the ERP Integrator area in EPMA, I am trying to select the ledger, when I select the entity for integration.
    Select Source Accounting Entity for Integration screen returns no rows.
    Any advice?
    I was thinking it has to do something with ODI and specifying which Oracle E-Business Suite segments/books to pull data from. Has anyone seen a setting for a Oracle EBS segment/book in the topology manager?
    Edited by: user8702914 on Oct 22, 2009 10:39 AM

    Hello,
    FDM is supported to Oracle RAC but not the ERP Integrator. If you see the 11.1.1.3 support matrix oracle has updated on the last tab telling that FDM will support. ERP Integrator is a new product and it was never designed or tested to be on Oracle RAC. This is what the information we got from the Oracle support when we were doing our in house testing for 11.1.1.3
    Thanks

  • ERP Integrator

    Hi all,
    We have requirement to load data from oracle GL to Hyperion planning by using ERP integrator and ODI.
    We configured the source system in ERP integrator and ODI.
    When we try to Intialize the source system in ERP integrator,we are getting error in ODI operator "Table or View does not exists"
    Thanks

    Hi Murali,
    1. I have faced this issue recently ,and the solution is very simple .Go to your browser -> internet settings -> language settings -> add english US here .
    2. Restart the ERP services, and check after logging into workspace , if you still have $
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • ERP INTEGRATOR and FDM

    Hi All
    We have new  requirement our Source is PeopleSoft from that we want to load data to essbase and planning  using ERP Integrator
    Previously we use to get text files from Peoplesoft and we use to load it FDM  to Planing & Essbase
    What are prerequisites  to connect to Peoplesoft -> ERP Integrator -> FDM 
    Do we require ODI to connect to Peoplesoft ?
    Can anyone explain  me the flow
    Thanks,

    Hi Tom
    We are using
    1. Hyperion 11.1.2.2  Essbase ,Planning and FDM
    2.ODI 11g
    3.Now we want to Connect to Peoplesoft using ODI -> ERPi -> FDM ->Essbase and Planning
    One is connecting ERPi & FDM through the use of the appropriate adapter, and additional metadata information.
    If possible can u explain the above clearly
    Thanks

  • Hyperion and ODI Integration

    While integrating Hyperion Essbase and ODI (oracle Data integrator) , can ODI directly read from Hyperion or does Hyperion generates csv through which we can make ODI read .
    Can some one through some light on this process. since the Oracle documentation talks more abt the flat files like Csv etc. So i got this doubt.?
    Thanks

    Hi,
    You can perform the following task at the time of integration of ODI With Hyperion Essbase
    i) Data Loads
    ii) Dimension Loads
    iii) Data Extracts
    iv) Dimension Extracts
    Available Knowledge Modules for the Hyperion Integration with ODI are:
    RKM Hyperion Essbase
    LKM Hyperion Essbase Data to SQL
    LKM Hyperion Essbase Metadata to SQL
    IKM SQL to Hyperion Essbase (Data)
    IKM SQL to Hyperion Essbase (Metadata)
    3 types of Data Extract possible
    Report Scripts
    MDX Scripts
    Calc Scripts
    2 types of Load possible
    Rule file based load
    API based load
    There is no limitation of using csv file you can load metadata or data from RDBMS (ISO 89 Syntax Supported E.g. DB2,Oracle,SQL Server),text file even from xml

  • Project Kickoff and ERP Integration workshop updates for r1402

    The following workshops and accelerator are update for r1402 in the SAP Cloud for Travel and Expense Service Delivery Kit wiki (only SAP employees and partners have access).
    Implementation Project Kickoff
    SAP ERP Integration Workshop
    Systems Requirements Checklist
    We welcome any feedback in the Accelerators and Workshops Feedback wiki.

    Hi,
    I think most of your questions have already been answered.
    Regarding the difference from SAP SRM, the E-Sourcing product is Java based and it takes lesser time to setup.
    Configuration is through the UI.
    Functionally, the benefits are very similar between ES and SRM - however E-Sourcing additionally supports Contract Document Authoring and Forward Auctions.
    From the technical configuration point, Java and SQL skills are needed for customizations.
    Also ES is available as an On-demand product.
    Hope this helps.
    Regards,
    Reshma

  • ERP integrator target applications greyed out

    Hi all,
    I'm configuring the ERP integrator within EMPA (to use with FDM later) but when registering target applications three of the four are greyed out.
    I have tried to delete and refresh them, re-deploy and so on but they stay greyed out.
    Can anyone tell me how to re-activate the target applications so i can select them again?
    Thanks,
    Marc

    Hi All,
    Did any of you had success in configuring FDM with ERPI. I am trying to configure FDM+ERPI for extracting data from Oracle Financials R12 and load it into an EPMA Planning application. When i go onto create a Metadata Rule and click on the Add Dimension button, the next page gives an error stating: There are no more dimensions remaining to be mapped under this application. and the dimension drop down in the target application area remains empty. Any idea why this happens? My Hyperion version is 11.1.1.3. I also downloaded and applied latest available patch of ERPI but no results.
    Thanks & Regards,
    Muhammad Jamshaid Nawaz

  • FDM mapping in ERP Integrator

    Hi, all of you
    I'm now thinking of the way to connect Oracle EBS 12.1.1 and Oracle Hyperion Financial Management, Fusion Edition 11.1.1.3.0 with ERP Integrator.
    In the introduction section in ERPI admin guide, ERPI is mentioned as a module of FDM.
    However, as far as I read the later sections in the guide, FDM is needed only if the user wants to use "FDM mapping."
    Is my understanding correct, and EBS and HFM is connected only with ERPI (without FDM)?
    And, if you know the advantage of using FDM mapping (I couldn't understand, actually), please tell me.
    Thanks in advance
    Yoshiki

    FDM is not required.
    The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
    Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
    Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

  • ERP Integrator Source Informations

    Hi All,
    I would like to know whether ERP Integrator will support the External feed file(from any other source system) to Hyperion Applications. ERP Integrator will support all ORACLE ERP & HR Modules, but in terms of external system likes Customized ERPs it will support or not. I understood from the below content, it will support the external system through Open Interface Adapter. I couldn't find any document on Open Interface Adapter.
    Anyone having the experience on the above scenario, Please share your experience and let me know is there related document or URL..
    I got the below content from the Oracle documents:
    ERP Integrator supports general ledger data for:
    Oracle E-Business Suite 11i
    Oracle E-Business Suite 12
    Oracle Fusion Financials
    PeopleSoft Enterprise Financial Management 9.0
    PeopleSoft Enterprise Financial Management 9.1
    PeopleSoft Commitment Control
    SAP ERP Financial
    JD Edwards General Ledger system
    ERP Integrator supports human resource data for:
    PeopleSoft Human Capital Management 9.0
    Integration includes data load and drill through. The integration is supported for the following SAP ERP Financial modules:
    General Ledger
    Profit Center
    Cost Center
    In addition ERP Integrator provides support for Open Interface Adapter. The Open Interface Adapter allows you to import data from any source system using the interface table.
    Thanks,
    PC

    Hi All,
    Got the Answer, The ERP Integrator will support external feeds files through FDM as well as they introduce Open Interface Adapter for flat files in new version(11.1.2.2). Please refer FDM ERP I read me document for more details. Currently i dont have any information for Open Interface Adapter. I will let you post the same once i got the reference materials.
    Thank you for all your support.... :)
    Thanks,
    PC

  • Loading Alias from EBS to planning through erp integrator

    Hi all,
    Can anybody tell me how to load the member properties from EBS to Hyperion Planning using ERP integrator. My trial only loaded the members with few default properties.
    My planning application is classic. And i used mapping type as "single segment". Didnt find any detailed options there to define the member properties.
    Thanks

    Hello,
    I do not believe storage type is available.
    The Alias is based on the languages you have defined when you setup your applications inside of ERPi. Not all "aliases" will come over; and only the basic information is actually stored as a description. I would suggest you review the ERPi Admin guide for your release.
    Please review the documentation completely and ensure you understand it. The most current documentation can be found at the following URL.
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin.pdf
    Information retrieved from the source can be found on Page 31.
    Information about aliases can be found on Page 34.
    Thank you,

  • SRM 7.0 erp integration

    Hi all,
    is there a standard integration between SRM 7.0 and ERP? Thanks!

    Can we use RFCs just like in SRM 5.0?

  • Business One & Business Suite ( ERP ) Integration

    Hi,
    I'm looking for the official alternatives from SAP regarding the integration of SAP Business One and SAP ERP ( 6.0 ECC ).
    I know there is a SAP Business One version 2005 Integration for SAP Netweaver, but the question is if this alternative is standarized, works fine and if it requires custom development of any type or if it's just plug and play.
    Is there any other documentation or experiences available with this alternative, or other alternatives available.
    Thanks.

    Thanks Lisa your answer!
    I changed the company database in SLD -> B1If -> B1DI section. Tested the connection and everything is OK in the Integration Framework.
    Tried in SBO client. At the login no problem, no error message, but the dasboard show this message:
    SAP B1iP detect an error:
    Emitted HTTP-Code
    500 - Internal Server Error
    Internal Reason
    Did not supply an appropriate user-ID integer (Param6):
    Remonnendation
    Check the correctness of your activity or environment or ask your system-administrator for further help.
    I checked the dll and database version, there are OK, 880230.
    Restarted the Integration service and try again, but could not connect the B1 dashboard.
    Try the hungarian demo database which have B1i user, and I met same error messege than the test database.
    Other important thing in the test database than I see. It has not B1i user, but has B1i1, B1i2....etc.. to B1i40.
    Is this normal? I try to create B1i user and the B1 say: This user exist in database table.
    Have you got any idea?
    Gabor
    Edited by: Gábor Nagy on Aug 4, 2010 7:11 PM

  • SCADA - XMII - ERP integrations through SAP PI

    Hi Experts,
    I have an integration scenario comprising of a SCADA system & SAP ECC. Could anybody suggest some document / send reference links on SCADA - XMII - ERP integrations through SAP PI.
    Useful response would be appreciated.
    Regards,
    Santhosh

    SCADA-XMII integration
    Scada system should always remain connected to some Historian system. You can directly connect to SCADA system to xMII using vendor specific UDS (Universal Data Servers) Like Citect UDS ...
    If vendor specific UDS is not available in MII then you can make it possible if the SCADA system is OPC complaint, through OPC UDS DA, but it provides only current data without any mata data information.
    As a robust business practice it is not recommended to use direct SCADA connectivity to xMII, it should go through some Historian( Citect, Wonderware, Siemens...many more) so XMII will be able to get all plant floor operations data in history & current modes.
    XMII-ERP Integration
    XMII supports IDOC & BAPI communication with ERP system using various SAP connectors available in XMII as in SAP BC, SAP JCO.
    Specific to PI Sheet, you can download various control receipe, process orders data using IDocs.
    BAPIs can be used to do "process order confirmations" back to ERP system and make changes in process data.
    Let me know if you would like to know about specific SCADA system- xMII connectivity or specific activity in PI.
    Thanks
    Ram Upadhyay

  • Target registration in ERP Integrator in the Workspace

    Hi,
    I'm trying to integrate HFM 11.1.1.3 with E-Business suite R12 using ERP Integrator. Actually, I want to load journal entries from EBS in HFM.
    I've successfully registered the source (EBS) and I filled all the ODI details, but I can't register the target (HFM) as the "Target Application" field is empty although I've created application in hfm and in workspace.
    I'd appreciate any help.
    Thanks in advance.
    Ahmed.

    FDM is not required.
    The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
    Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
    Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

Maybe you are looking for