Hyperion essbase server installation problem

I had a problem while installing hyperion essbase. In the essbase server, I entered a username and while doing administrative configuration utility, I was asked to enter these details and when I entered it says that the information was incorrect. I tried several times but it was locked I guess. So, please help me how to change the user name and the pass word in the essbase server so that I can run the configuration utility with no problems?
Thanks in advance
Tejaswani

You might get a better/faster response in the Hyperion forum at Hyperion EPM
Srini

Similar Messages

Is sessionnumber generated in the Hyperion Essbase Server is unque?

Hi All,
Is sessionnumber generated in the Hyperion Essbase Server is unque? how to get the session number in the CBS file? What is the code to get the Session number in Essbase Integration Services Shell?
Regards
Shakti

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

BPC7.0 NW Server installation Problem

Hi,
We installed BPC 7.0NW Server in windows Server 2003 Operating system. Afer installation we tried to start server manager but we are getting "your login id does not have systemadmin rights. you must log on with a user id that has sysadmin privileges" error message. Under server diagnostic tool we are getting "NO SAP Components found" error message.
we checked sap note 1288692 for "your login id does not have systemadmin rights. you must log on with a user id that has sysadmin privileges" error message and we noticed that during BPC server installation process system did not prompt us for MSMQ Path as described in point 8 in section 3.3 of install guide and also there is no 'MessageQueue" feild to give message queue value in Serverconfiguration.config file as mention in point 2 of sap note 1288692.
could some one help us to resolve the issue why we are not prompt us to enter MSMQ Path during installation of server.
Thanks
UDAY

Hi,
During the install, you should be prompted for the MSMQ path for sure. If it didnt popup for you then probably you might want to check your install files.
Have you checked the MSMQ path? While installing did you make yourself as the local admin on the .net server? Also have you checked the UJA_SRV_DEFAULTS table to see if the SysAdmin has the proper user defined like domain\user?
If the field MSMQ path is missing from the serverconfiguration.config file then I guess uninstalling everything and doing a clean install would help you. Make sure that this time you get the screen where you enter the MSMQ path. If the screen is still missing then download the new install files from the SMP and try again.
Thanks

Hyperion Financial Management Installation Problem on WinXP system

Hi,
I am trying to install EPM/HFM 11g from scratch. I have downloaded the following files and extracted them in a folder. I started the installation with a specified hyperion_home as C:\Hyperion1.
APS-11113.zip
EPM-Architect-11113.zip
EPM-FoundationServices-11113-Part1.zip
EPM-FoundationServices-11113-Part2.zip
EPM-FoundationServices-11113-Part3.zip
EPM-FoundationServices-11113-Part4.zip
Essbase-11113-Part2.zip
HyperionFinancialManagement-11113.zip
E12825_01.zip
EPM-SystemInstaller-11113.zip
Essbase-11113-Part1.zip
Unfortunately, the installation didn't go through well and I had the stop the installer as it was stuck. So, I thought I should start again with a clean slate. Thus, I uninstalled the program from control panel, extracted the files again and ran the installer. Somehow, the installer now fails with every product item lines marked as Failed.
I checked that the HYPERION_HOME/coomon/config/9.5.0.0/product directories are created and the Hyperion_Home/logs/install/installTool-install-stderr.log file indicates certain directories that are not present yet -
java.io.IOException: Cannot run program "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\services_build_helper.exe" (in directory "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin"): CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
     at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     ... 7 more
java.io.IOException: Cannot run program "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\services_build_helper.exe" (in directory "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin"): CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
     at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     ... 7 more
java.io.IOException: Cannot run program "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\BPMAConfig.exe" (in directory "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin"): CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
     at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     ... 7 more
could not utilize start class: com.installshield.wizard.Wizard
java.lang.SecurityException
     at com.hyperion.install.action.impl.ISMPSecurityManager.checkPermission(ISMPSecurityManager.java:34)
     at java.lang.SecurityManager.checkExit(Unknown Source)
     at java.lang.Runtime.exit(Unknown Source)
     at java.lang.System.exit(Unknown Source)
     at com.installshield.wizard.Wizard.startup(Wizard.java:248)
     at com.installshield.boot.BootMain.boot(Unknown Source)
     at run.main(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.hyperion.install.action.impl.ISMPExecAction$1.run(ISMPExecAction.java:103)
java.io.IOException: Cannot run program "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\services_build_helper.exe" (in directory "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin"): CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
     at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     ... 7 more
java.io.IOException: Cannot run program "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\services_build_helper.exe" (in directory "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin"): CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
     at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     ... 7 more
java.io.IOException: Cannot run program "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\BPMAConfig.exe" (in directory "C:\Hyperion1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin"): CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessBuilder.start(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
     at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
     at com.installshield.wizardx.actions.ExecWizardAction.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=3, The system cannot find the path specified
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(Unknown Source)
     at java.lang.ProcessImpl.start(Unknown Source)
     ... 7 more
could not utilize start class: com.installshield.wizard.Wizard
java.lang.SecurityException
     at com.hyperion.install.action.impl.ISMPSecurityManager.checkPermission(ISMPSecurityManager.java:34)
     at java.lang.SecurityManager.checkExit(Unknown Source)
     at java.lang.Runtime.exit(Unknown Source)
     at java.lang.System.exit(Unknown Source)
     at com.installshield.wizard.Wizard.startup(Wizard.java:248)
     at com.installshield.boot.BootMain.boot(Unknown Source)
     at run.main(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.hyperion.install.action.impl.ISMPExecAction$1.run(ISMPExecAction.java:103)
Any idea/suggestion, what might be wrong here.
Thanks

user12098325 wrote:
Any idea/suggestion, what might be wrong here.Unsupported O/S could be the issue.
Cheers
John
http://john-goodwin.blogspot.com

SUN ONE Directory Server installation Problem on Win XP

Can some one look at the installation error on WIndows XP
ERROR: Ldap authentication failed for url ldap://santoshlaptop.cook.com:51303/o=NetscapeRoot user id admin (151:Unknown error.)
Fatal Slapd Did not add Directory Server information to Configuration Server.
Configuration of the Directory Server failed.
Error Directory Server configuration failure
Checking connection to the Configuration Directory Server... failed.
The Admininistration Server cannot be configured.
Error Administration Server configuration failure
Error Configuration of the server(s) failed
Thanks a lot
Santosh

HI everyone,
I tried installing directory server 5.2 p4 on WIN XP Professional machine and got the following error:
[slapd-Teja]: starting up server ...
[slapd-Teja]: [22/Sep/2006:13:25:52 -0400] - Sun Java(TM) System Directory Server/5.2_Patch_4 B2005.230.0301 (32-bit) starting up
[slapd-Teja]: [22/Sep/2006:13:25:54 -0400] - Listening on all interfaces port 30145 for LDAP requests
[slapd-Teja]: [22/Sep/2006:13:25:54 -0400] - slapd started.
Your new directory server has been started.
Created new Directory Server
Start Slapd Starting Slapd server configuration.
ERROR: Ldap authentication failed for url ldap://ldapteja.hcs.com:30145/o=NetscapeRoot user id admin (151:Unknown error.)
Fatal Slapd Did not add Directory Server information to Configuration Server.
Configuration of the Directory Server failed.
Error Directory Server configuration failure
Checking connection to the Configuration Directory Server... done.
Registering Administration Server with Configuration Directory Server... done.
Loading Administration Server tasks... done.
Loading global Administration Server configuration... done.
Generating configuration files ... done.
Writing Administration Server keys to the Windows registry... done.
Configuration of the Administration Server succeeded.
Administration server started properly.
Error Configuration of the server(s) failed.
Click Next to continue.
In fact I did install 5.2 before on my machine but I think it was 5.2 p2. I then installed 5.1 on the same machine.. as the machine was running slow I uninstalled both 5.1 and 5.2 as well.. but from then on I cannot install 5.2 on my lasptop .. can please suggest me some thing that can fix this problem..
I had this in my host file
192.168.1.107 Teja.hcs.com..
Any help is reatly appreciated ..

BPC 7.0 Server Installation Problem - Cannot connect to reporting services

I am upgrading from 5.1 to 7.0 version for SAP BPC. Everything went smooth on the development server (single instance installation including SQL Server 2005 developers edition 32bit, web, reporting and application services on the same server). I tried to repeat the same process on the test server, and the installation went off the rails. I started with clean installations of SQL Server 2005 on both servers.
When I try to install the BPC server software, I get to the point of access to the report server, and everything stops. I get the following message: Cannot connect to reporting services. I have verified the reporting server name, and I have verified that the server name is correct in the installation panel. I have also verified that the reporting server is configured, started, and that there are no errors.
Any advice?

Hi Sorin,
Thanks for the tip, but this was not the case. The problem was solved by re-loading the OS. Using Windows Server 2003 gave an issue during the re-installation of the SQL Server database. The problem was in the installation itself. After a clean install of both the OS and SQL Server, then SAP BPC 7 worked. The installation does require a number of tweaks, particularly, in my case, the entire Management console must be configured, even if not being used.
This problem is now solved.
J.

Report Server Installation Problem

hi
we have installed java web server and dev6 server and deployed our application (which
was coded on Forms 5 later converted to 6) it is working fine in the web browser
but we have problem in running developer report server as nt service. we have followed the same steps as stated on oracle documentation.
we have added all the necessary entries in the registry and created an entry at tnsnames.ora, then installed the oracle report server at the command prompt - the service was added. upto this point it was quite okay. when we startup the report service we are getting "Oracle Report Server Service retuned server specfic error 186"
our oracle server runs on diffrent system
whose ip address is 129.1.2.203 and instance name is O8E. the web server and developer server runs on workstation and it got the following entry on the tnsnames.ora:
rserver.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 129.1.2.201)
(Port = 1521)
(CONNECT_DATA = (SID = O8E)
we have checke-up all the trouble-shooting tips given in the documentation, but all in vain.
can anybody suggest some tips on this
thanks in advance
regds.,
null

The tns entry you show for rserver is a DATABASE entry (it has a SID) which would explain why this doesn't work - the reports server entry is shorter.
Please refer to the Reports Server Configuration whitepaper, available on OTN (under the 6.0 collateral) which provides in-depth instructions for setting this up. In Reports 6i the installer does all this for you.
Regards
The Oracle Reports Team http://technet.oracle.com

Win32 Oracle 10g Database Server Installation problems

Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkk

I can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock;

Essbase server installation

Have any doby ever got this error message:When creating a new application JVMXM008: Error occured while initialising System ClassException in thread "main" error: 1054003 Error 1200442 loading application: java Virtual Machine errorThanks in advance

Weblogic and ohs and opmnn are part of the additional content install, you must include this component when installing essbase so it installs the opmn components.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle 9i Application server installation problem(MSG:Fully qualified domain name)

I have installed Oracle 9i database.Now downloaded application server 9iAs,when i am installing I have got this error message(J2ee and web cache)
Message begin
Installation has detected that a fully qualified hostname has not been specified for this host.Oracle 9i application server requires a default domain name to be specified for each host where it is installed .Please consult your OS instructions for details on assigning a default domain name If u are not using DNS server then the file d:\windows\system32\drivers\etc hostsmust also include a line of a form
<IP_ADDRESS><FULLY_QUALIFIED_HOST_NAME><ALIESES>
Message End
Could some one suggest the procedure to follow.
Pl ,mailme to [email protected]
I appriciate your help
Tahnq
Ravi

Search this forum for answers and discussions.
Basically, your machine will need a "fully qualified hostname" e.g. myhostname.mydomain.com, only myhostname is not enough.
Also, AS does not allow the IP to change after install e.g. no DHCP (dynamically allocated IP) allowed!
Hth,
Fredrik

XMII 11.5 Server Installation Problem

Hi all,
I have certain issues with the installations. I have installed the server, followed each step and did it successfully.
However when I go to the Menu.jsp page, It Says, PAGE CANNOT BE DISPLAYED.
Please tell me whats wrong with the installation.
I think it still needs some post installation steps to be completed.
Also let me know if there is some post installation guide for the same
Thank you
Gita

HI,
Thanks a lot for your help Jeremy.
Right now, I'm planning to remove the xMII and J2SDK completely from the server, and then start the installation from scratch with 1.4.2_12.
Can you give me the instructions for totally removing xMII from the server. With nothing left at all.
From the Add/remove s/w, I need to remove the following:
SAP xMII 11.5
SAP xMII CMS 11.5
SAP xMII Productivity Wizards
SAP xMII Security 11.5
ServletExec 5.0 AS
What else?
Thank you,
Gita
Edited by: Gita Chhatri on Apr 7, 2008 1:56 PM

Hyperion Shared Services Installation Problem (URGENT)

Hi,
I have installed the Hyperion Shared serives 9.3.1 with Oracle Application server and configured with the same but in
services.msc i am able to see only HyperionS9OpenLDAp. i did the all post task and did manual configuration for
Oracle Application Server like
1 Created new OC4J instance for Shared services
2 Added the below lines respective config/global-webapplication.xml file
<init-param>
<param-name>req_time_introspection</param-name>
<param-value>true</param-value>
</init-param>
3 set the heap size
Maximum heap size 512M
Initial heap size 256M
4 Added the Java Options below
-Dhyperion.home=<HYPERION_HOME>
-XX:PermSize=64m
-XX:MaxPermSize=128m
5 Deploying interop.war
6 Added the below lines to Jave calss path
<HYPERION_HOME>\deployments\generic\SharedServices9\config;
<HYPERION_HOME>\deployments\generic\SharedServices9\config\lib
\HubProductBean.jar;
<HYPERION_HOME>\common\JDBC\DataDirect\3.6\lib\hyjdbc.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-collections-3.2.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-dbcp-1.2.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-logging-1.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-pool-1.3.jar;
<HYPERION_HOME>\common\loggers\Log4j\1.2.14\lib\log4j-1.2.14.jar;
<HYPERION_HOME>\common\XML\JAXP\1.2.2\xercesImpl.jar
<HYPERION_HOME>\common\SAP\lib;
But i able to get only one service.
Please help on this
Regads
KumarK

hi,
I have the same supported Version of ORACLE APPLICATION SERVER 10g 10.1.3.1 and for the not able to see the Hyperion Shared Services service in Services.msc as while installing Shared Services there no Option like Deploy as Windows services so not able to see there i think.Please correct me if wrong.
Here i have one doubt while Configuring Shared Services with Oracle Application Server we are not specified the port number for Shared Services. So is it takes the same PORT number and URL is
http://<servername>:58080/interop/
Please clarify me.
Regards
KUMARK

MI Server Installation Problem while installing MAX DB

Dear All,
As a part of installing MI Server, I am getting the following error while installing MAXDB.
The dbmcli call for action ACTIVATE failed.
-24988,ERR_SQL: Sql error
-2014,Identifier too long
Could anyone of you let me know the solution if you know it.
Thanks and regards,
Kishore.

Hi Kishore,
-24988: ERR_SQL - sql error:
An error occurred when a command was issued to the database kernel.
For this If necessary, consult the other database-kernel error message and correct your entries accordingly.
If the error occurs in the Database Manager GUI and there is no way in which you can correct it, please contact your local support organization.
2014: Identifier too long
The specified identifier is too long for the SQLMODE used.
Pay attention to the restrictions in the table when specifying the identifier.
SQLMODE- Length of identifier
ANSI - 18 characters maximum
DB2 - 18 characters maximum
ORACLE - 30 characters maximum
INTERNAL - 32 characters maximum
I never did this myself though, hope you find these links usefulhttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/mobile/mobile%20infrastructure/best%20practices%20for%20sap%20mobile%20engine%202.5/bblibrary/documentation/mi25_installation_guide.pdf
watch this tread which has a prob smilar to that of yours
Forum: Expert Forums » Community Discussions » Trials, Previews & Other Downloads
sub: NW04s ABAP installation failed at phase 11 of 24
thread:
and this one too:
Hope you solve your issue soon,
Regards
Divya

WAS server Installation problem

Hello Everybody,
I want to install WAS developer workspace SP10 on developer's machine.
But at the time of installation, it stucks at the installation topic: Installing Database.
Its taking long time and not going forward.
It also taking 100% CPU utilization on the system.
No error in log file.
What could be the problem in this?
Regards,
Bhavik

Hi Rajit,
I was facing this problem on two different systems.
On one system, I have deleted all the folders releted with Database and also Sapinst folder and all log files.
Then i can able to complete my installation perfectly.
But it was not the case for another machine.
We have done same thing but still it gives error.
I have also clear all regitry entries.
But still it gives error.
Thanx,
Bhavik

Sql server installation problem

I'm experiencing difficulties installing sql server on my laptop. I always get "compactibility" related issues

I got this:
"The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more
information. HRESULT: 0x8007054F."
Ok I was expecting complete summary file. When asked about complete info do provide complete info.
YOu need to manually install VC++ 2005 SP1 from below link. This is very common issue
http://www.microsoft.com/en-in/download/details.aspx?id=5638
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Hyperion essbase server installation problem

Similar Messages

Maybe you are looking for