Hyperion FDM and ERPi 11.1.2.2 Import failed with ERPI-FIN-E

Hi Experts
I am doing first time ERPI Configuration
We are implementing Hyperion 11.1.2.2 FDM with HFM (Target Adapter = FM11X-G6-A) and ERPi (Source Adapter = ERPI-FIN-E) running on ODI 11.1.1.6. Backend databases are all Oracle DBs. We have been able to successfully configure ERPi and ODI & successfully run a Data Load Rule with all green checks in ODI Operator. We have also successfully tested the full FDM workflow with load to HFM using the traditional flat file method.
We have also setup an FDM Location and Import Format (File Type = Adapter; Adapter = ERPI-FIN-E) for use with the ERPI Source Adapter. When kicking off an Import via FDM Web we are getting Error : ORA-00942: table or view does not exist ORA-02063: preceding line from FDMHYPERIONDEV.
Contents of ERPI-FIN-E.log is below:
*** 4/8/2013 12:02:32 PM ***
PeriodKey = 3/31/2012 12:00:00 AM
PriorPeriodKey = 2/29/2012 12:00:00 AM
Rule Name = EBS Data Load
Execution Mode = FULLREFRESH
executeRule...OK.
*** 4/8/2013 12:02:32 PM ***
System.Runtime.InteropServices.COMException (0x80040E37): ORA-00942: table or view does not exist
ORA-02063: preceding line from FDMHYPERIONDEV
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
Thanks Advance.
Nagarjuna Reddy

Yes Data Rule Running Successfully from ERPi.
IF we Import From FDM Web Client ODI Scenarios Running successfully after that Showing Error Table or View Does Not Exist. and Log file like below
*** 4/9/2013 4:18:22 PM ***
LoggedInUser = hfmadmin
Token = Xhj55LFLJqZlNnyOriPyEVipmO3c2mvD/9R7b3XzWoNngYLhEnwVUqJLHuqaLGWRVYhfV/tXfZ
FahuBfK/ozpc1lDmtaLC7Ug6NO67MALvD/L5V7ELoYgYDTt6hplkXDEHn54fsAaX1pqwRgcufftF
bo0jBuiCjpj/K4UTTDvBu/oIy+wWbnj5IKXunkEEs8qEfeutvzvsQPLogwbPlc/u4uxQqwFmY0/e
e+fTkXgRxY17FMHTMaOwNytap8bg07wkDFjBQ8sMN63o5aRI56Y+NMT19V5u6r6eSplr+QzVYqLx
SpXscelv55j+CRHTA1NYa7gJ+U2ktrJB6RsvxQ==
ERPIdbConnString = Oracle://hyperiondev:1521/epmrapid
m_ERPIdbUserID = HYPEPMA
ERPIdbPassword.Length = 10
*** 4/9/2013 4:20:07 PM ***
PeriodKey = 3/31/2012 12:00:00 AM
PriorPeriodKey = 2/29/2012 12:00:00 AM
Rule Name = EBS Data Load
Execution Mode = FULLREFRESH
executeRule...OK.
*** 4/9/2013 4:20:08 PM ***
System.Runtime.InteropServices.COMException (0x80040E37): ORA-00942: table or view does not exist
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
-----------------------------------------------------------------------------

Similar Messages

Hyperion FDM and ERPi 11.1.2.2: ORA-12504 on Import with ERPI-FIN-E

Hi everyone,
We are implementing Hyperion 11.1.2.2 FDM with HFM (Target Adapter = FM11X-G6-A) and ERPi (Source Adapter = ERPI-FIN-E) running on ODI 11.1.1.6. Backend databases are all Oracle DBs. We have been able to successfully configure ERPi and ODI & successfully run a Data Load Rule with all green checks in ODI Operator. We have also successfully tested the full FDM workflow with load to HFM using the traditional flat file method.
We have also setup an FDM Location and Import Format (File Type = Adapter; Adapter = ERPI-FIN-E) for use with the ERPI Source Adapter. When kicking off an Import either manually via FDM Web or via Batch Loader, we are getting a grey fish, Information Bar with "Error: Import failed. Invalid Data or Empty content", and pop-up error dialog displaying "ORA-12504: TNS: Listener was not given the SERVICE_NAME in CONNECT_DATA.
While previous versions of ERPi Source Adapter have the "ERPi Database Server/Service" option, ERPI-FIN-E does not have this option. Additionally, we have tested the TNSNames.ora files SID's with SQL Developer and SQL Plus and they all seem to be working.
Has the "ERPi Database Server/Service" option moved somewhere behind the scenes? Another options or DBLink that needs to be setup somewhere else? Any thoughts or assistance would help.
Thank you.
Contents of ERPI-FIN-E.log is below:
*** 1/22/2013 9:30:01 AM ***
LoggedInUser = +redacted+
Token = iZKY0Aj/AeTH9AV6F/k980xCFWDzrk5im3n2E0SnmNg6c/fNa/XjSfSU6+wemuIo3IQdzrUlhAj8
M9J9SJpU5TvCibwJZaUJOh3nlA83UlfKOHpUC7oPGOqhedu+XIPbMC022Ftcb4LexFa/M1R6Rw1h
4D7nbb0nLQv/viNdZyXzORrXzKD41ljWAnw/J/R84ZYt3yHyjxI2KBz6f7x9FKyfNnD5XJuR+50y
klV8tjlLY6EvfKyiv/ecSanQuWeA1p2D8MBIFUftHtqgnbABXOEyRll4kT9yaPUaClpvLDaD7knt
iBUSXU1fIOoKuHtrrD4XCvjMKcowWv/SnLIrbkn2HXotkKwqCulHx2is6yWnJfni96tZGvG8z4ds
WRgm7tsJRV12Tp5zeNLSxZTZoK/5AMCdN5MC6u88G59prlI=
ERPIdbConnString = Oracle://EPMD1.ges.+redacted+.com:1521/EPMD1
m_ERPIdbUserID = ERPI
ERPIdbPassword.Length = 6
*** 1/22/2013 9:30:17 AM ***
PeriodKey = 11/30/2012 12:00:00 AM
PriorPeriodKey = 10/31/2012 12:00:00 AM
Rule Name = DLR_1
Execution Mode = FULLREFRESH
executeRule...OK.
*** 1/22/2013 9:30:17 AM ***
System.Runtime.InteropServices.COMException (0x80040E14): ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
-----------------------------------------------------------------------------

Below are the contents of the "E:\Oracle\product\11.2.0\client_32\network\admin" and "E:\Oracle\product\11.2.0\client_64\network\admin" folders on application server. EPMD1 = ERPi, HFMD1 = HFM, FDMD1 = FDM, EPMD5 = R12.
Since we are able to connect via SQL Developer and SQL Plus to EPMD1, I believe these settings are OK, but open to additional checks if suggested.
EPMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = EPMD1.ges.+redacted+.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EPMD1.ges.+redacted+.com)
HFMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HFMD1.ges.+redacted+.com)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HFMD1.ges.+redacted+.com)
FDMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = FDMD1.ges.+redacted+.com)(PORT = 1523))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FDMD1)
EPMD5 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tus1ebsdbsdin11.ges.+redacted+.com)(PORT = 15212))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EPMD5.ges.+redacted+.com)
)

Import fails with: ... cannot be overwritten as the id and name mismatch.

We have a test and a production environment with portal 9.0.2.2.14A.
We Use the exp/imp utilities to publish our portal.
In the test env we dropped and re-created a corrupted dynamic page.
When importing this component in the prod env we have the following message:
Checking for type = DYNAMIC Name = MENU_PAGINE Id = 4867642631 ...
MENU_PAGINE cannot be overwritten as the id and name mismatch.
Import of MENU_PAGINE will fail.
We cannot drop this component because we don't find it with the Navigator (I think that the previous import didn't create it correctly because of the corruption in the test env).
Can anyone help me?

Any component created wil have information gets stored in the tables wwv_modules$,wwv_module_details$,wwapp_application$
Try to find the module_id of the dynamic page created, and delete it from all the 3 tables.

Tried to update Photoshop CC and Illustrator CC to CC (2014) - Installation failed with the following error message

Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at

Whitmack please reinstall Microsoft Visual C++ 2012 Redistributable Package (x64) from Latest Supported Visual C++ Downloads.

How to use import script with FDM using adapter ERPI?

Hi,
I use FDM and ERPI 11.1.2 to load data from EBS R12 to Planning 11.1.2
Data loaded from eBS are YTD data.
I have seen that I could use an import script to calculate manually the amount with the periodic_net_cr and periodic_net_dr fields.
But how to use this import script? Because in my import format in FDM, I don't use a file but directly the adapter, so no "Expression" field.
Thanks in advance for your help
Fanny

Hello Fanny,
No you will not need to put anything in the BatchAction. If you review the FDM API Documentation posted it will outline all the scripts that will execute for a particular event ... and the order in which they execute. The BatchAciton only affects the execution of the batch ... it does not control processing of data. Processing of data is controlled by many others.
There is a script that can be written and placed (as Tony mentioned) in the ImportAction that will be able to recaculate the values from ERPi to be YTD values. You can possibly open an SR and a support Engineer can help you .... or you can search the current KM base and use that information there from the v11.1.1.3.00 version to build your own for v11.1.2.x
Thank you,

Msiexec failed with return code 1603 / installing SAP MMC Snap-In and creat

I am installing SAP ABAP trial on windows 7 and I have encountered some problems.
Please help me solve this problem.
Phase 2 : install common system files
Error happened during this step: installing SAP MMC Snap-In and creating shortcuts
Error message:
Running msiexec failed with return code 1603: Schwerwiegender Fehler bei der Installation.
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
I have alreday given the permission/rights that are necessary for the user who is installing the system.

Hello All,
We also faced the same error, I would like to share the solution steps which we have applied.
Solution :
Refer Note 1236002 - Error during the SAP MMC MSI installation or uninstallation
As per the note :
Download utility “Microsoft Fix It” from http://support.microsoft.com/mats/Program_Install_and_Uninstall
You have the option to run this utility online or you can download the folder structure following the instructions on this page
Then copy the Fix it Portable folder to the computer with the problem and run the Launch Fix it application
What Microsoft Fix It fixes...
Removes bad registry key on 64 bit operating systems.
Windows registry keys that control the upgrade (patching) data that become corrupted.
Resolves problems that prevent new programs from being installed.
Resolves problems that prevent programs from being completely uninstalled and blocking new installations and updates.
Use this troubleshooter for an uninstall only if the program fails to uninstall using the windows add/remove programs feature.
Best Regards..

PureFTP and //server/volume fails with many clients

OES2 SP2 and Novell FTP/PureFTP
Remote Browser paths fail with double slash //
#cd //server/volume/data fails with many clients only Windows/Linux
Command prompts works. IE and FireFox all fail.
Works with Windows/Linux command line ftp.
Thanks

Originally Posted by DrumDude
OES2 SP2 and Novell FTP/PureFTP
Remote Browser paths fail with double slash //
#cd //server/volume/data fails with many clients only Windows/Linux
Command prompts works. IE and FireFox all fail.
Works with Windows/Linux command line ftp.
Thanks
I am taking "fails with many clients" to mean that the method fails with "certain clients". (At first I thought maybe you meant, "once you have a lot of clients connected, it fails").
This is due to limitations of Web Browsers as FTP clients.
Even within the "standard" FTP world, it is generally accepted that Web Browsers make lousy FTP clients. This is especially true for use of this feature, which is definitely not "standard". Web Browsers make so many assumptions about what to do with a URL that you type in, or how to build the file links to what is found at the destination, that they just cannot make reasonable use of this special feature.
This FTP "remote server navigation" feature was brought over from NetWare. Web Browsers couldn't make use of it then, either.
I expect this navigation feature to work on:
- command line clients
- GUI FTP clients, *if* they allow you to enter an explicit command so you can enter the "cd" command manually, rather than just click to navigate.

Extracting data from Oracle GL and importing to FDM using ERPI adapter

Hi,
I am also trying to use ERPI adapter to directly extract data from Oracle GL. I am not finding sufficient information on this. It would be great if anyone can help me in this.
I have one more doubt: Can we call the stored procedures in the FDM custom scripts, If so can I get the syntax of the script...I really don't have idea on this FDM part. I was working till now with the Flatfile input, But my client wants to make this change in the existing system. Accessing/Extracting data from Oracle GL. Experts who knows it can pls guide me.
I am using FDM 11.1.2 and ERPI associated with 11.1.2.
Thanks in Advance.
[email protected]

Hi,
Is it possible to execute the stored procedures in FDM. Currently we are extracting data from oracle GL using SQl procedures (constaller tool is user to create the inteface) and storing the required data in the intermediate table in oracle GL, From which we are extracting data into a flat file and then loading it to FDM.
So my question: is it possible to invoke the stored procedure from FDM scripts, If so can you pls let me know how to do that...
Thanks In Advance,
[email protected]

FDM and Hyperion Planning Mapping options

Hi, Good Day
My team has an implementation of FDM and Hyperion Planning ver 11.1.2. We are basically using FMD because we need a place to maintain (user friendly) different mapping tables for the accounts dimensions, to be able to load data.
My questions are; when loading data, do we need to always map all the dimensions? Is there a way to avoid it?
For example in the model we have 300 accounts, 20 entities and 400 products. We need to map the accounts since they are different for all the entities (in the source data), however not the products. Therefore I want to avoid mapping the products (and maintaining this mapping) when loading the data. Is this feasible? Any ideas?
Kind Regars

Any dimension you have active in FDM i.e. constitutes part of the target reference for data you want to load has to be mapped. If your products don't need any transformation during the mapping process i.e. they are one to one simply use a 'pass-thru map' i.e a wildcard Like map with * as the source and * as the target.

Data duplicated between Oracle GL and ERPI

Hi
We are using ERPI to load data from Oracle eBS to Hyperion Planning. (version 11.1.2.1)
Rows are duplicated between Oracle eBS GL (table GL_BALANCES) and ERPI (table TDATASEG).
Thanks in advance for your help
Fanny

If the ODI process is being started multiple times by FDM you need to update the iisproxy ini file with the following 2 lines:
HungServerRecoverSecs=3600
WLIOTimeoutSecs=3600
You may have multiple copies of the ini file on the server so do a search and update them all.

FDM and FDM workbench

Hi,
Please tell me what is difference between FDM and FDM workbench.
Thanks in advance :)

The FDM web is the main interface for FDm when the Import of source data is performed, Mapping is Created, Locations are Built, etc.
The Workbench is strictly a Windows CLient tool for FDM administrators where the Adapters are imported and maintained for the target and source (if using ERPi).
The workbench is also used to import the reports for FDM and you can maintain scripts within the workbench (you can also maintain scripts from the web as well).

Whats the difference between FDM and ODI and DIM

Hi Everyone,
Can Anyone explain the diff between FDM,ODI and DIM
Thanks!
Vaneet

FDM is purpose-built for--though not strictly limited to--loading financial data from external sources into Hyperion financial performance management applications, such as HFM, Planning, Essbase, etc. It it commonly used in financial consolidation/closing process, and it has many native features expected and required to support that type of activity. FDM is very well-suited to its intended purpose in serving the finance community of an enterprise. FDM is not so well-suited as a more generalized ETL tool, nor as a tool for maintaining application metadata.
ODI and DIM, on the other hand, are both general-purpose, enterprise-class ETL tools. Unlike FDM, they can be used to maintain application metadata, although they aren't necessarily the best tools to use for that purpose in every situation. Both tools are much more IT-centric than FDM.
DIM is actually Informatica PowerCenter bundled with some pre-build adapters for Hyperion products. In ODI vs. DIM, ODI is clearly Oracle's strategic product going forward.
A restricuted-use ODI license is now included with several Hyperion products (e.g., Planning), whereas FDM and DIM licenses are not. But if one of your main requirements is to transfer financial data in a consolidation process, FDM is hard to beat.

FDM and HFR for Essbase ??

Guys,
We have a requirement to report chart of accounts, etc through Essbase from Oracle ERP and I want to validate the following
1) Can we use FDM/ODI and connect to Essbase from ERP for building cubes and loading data?
2) Can we use HFR to connect to Essbase cubes for reports?

For question 1 it may be worth having a read of the ERPi doc to see what it is capable of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin/launch.html
Depending on your system ERPi may be able to do what you are looking for -
"ERP Integrator supports loading data into EPM applications from general ledger source systems and also writing back budget data from target EPM Planning applications to general ledger source systems.
• Loading data from the General Ledger Source System - ERP Integrator supports loading data from general ledger source systems. ERP Integrator can load both metadata (dimension members and hierarchies) from the ERP source system as well as the related data."
There are other possibilities like loading data into FDM and pushing into essbase or not even using FDM, metadata would have to be built another way e.g. load rules, ODI.
Second question the answer is Yes.
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion Reporting and Analysis - DAS, IR and Job Services Replication..

Dear All,
We are on Hyperion System 9.3.1 on Windows box and Repository in Oracle 10g Database. We have around 300 Interactive scheduled jobs.
When these jobs are getting executed Hyperion Services are getting hang and In logs we are getting "Process out of memory..".
In order to overcome "Process out of Memory.. Exiting" error. We need to replicate DAS, Interactive Reporting and Job Services on the same machine.
I am doing Hyperion's IR, DAS, JOB Services Replication in Development environment. To achieve the same I performed the following tasks :
# I have installed and configured Hyperion System 9.3.1 below components on MS Windows XP professional SP2 and Repository in Oracle 10g database.
Hyperion Shared Services 9.3.1
Hyperion Reporting and Analysis BI+ Services
Hyperion Reporting and Analysis UI+ Services
Every thing was configured fine.
# To replicate the IR, DAS and Job Services. I started the Hyperion Reporting and Analysis BI+ Setup on the same machine then I select IR, DAS and Job Services.
# Next I started Configuration Utility. Which ask me to configure Database. I selected the same database which I used for BI Services previously. Database Configuration was successful.
# I changed the Port as below
Core Services to 7801 instead of 6801
Chaged the port for Job Service 7796 instead of 6796.
# Next started Service Configurator where System was showing one more Job Service (JF2_<hostname>) in Remote Service Configurator. And in Local Service Configurator System was showing new BI and DAS. Then I configured Data Sources in DAS.
# Started the Services.
Next I started the Scheduled Jobs. It is taking same time as earlier. In logs it is showing that Only JF2_<hostname> Service is getting used. System is not using JF1_<HOSTNAME> anymore.
I have few query regarding this.
1) Why Configuration Utility didn't ask for GSM host and Port? Do I need to configure it manually?
2) I have not chaged the port for DAS and IR Services. my concern is regarding port usage by new DAS and IR Services ? Do I need to configure it or It will be managed by system itself?
Please show me the direction. Any help would be highly appreciable.
Regards,
Manmohan Sharma

We have replicated the Hyperion Reporting and Analysis Services by changing the port number of Replicated Services to non-default port.
Services are working fine.
Regards,
Manmohan Sharma

Where can I download a trial version of Hyperion Planning and essbase?

I am new to Hyperion and want to train in it . Where can I download a trial version of Hyperion Planning and essbase?

Edeliver is where you go to download any of Oracle products. They are not trial versions. They are full versions. The license that you must agree to inorder to download them are for development and self-educational purposes only.
The main site is
https://edelivery.oracle.com/
From there you pick your language, identify yourself, and agree to the license agreement. Then, you select the product pack and OS of host system. Then, select the product you want to download. The products are splitup by component or modules. You must download everything you need. Foundation, Essbase, Planning, and Reporting and Analysis if you are going to do any reports.
Product pack - Choose Oracle Enterprise Performance Management System
OS - I use a 64bit OS, but choose the right one that you will be installing on.
Then choose,
Oracle Enterprise Performance Management (*11.1.2.0.0*) Media Pack for the OS you choose
Once you have downloaded the required packs, unzip them all into one folder. Merge the folders together and copy and replace all files. Put a check mark in the box that asks to perform this for other conflicts.
Once you have all packs unzipped, run InstallTool.cmd
The documentation zip file can be downloaded from http://www.oracle.com/technetwork/middleware/epm/documentation/epm-096302.html
Hope this helps.
Mike
Edited by: user10224619 on Feb 3, 2011 10:12 AM

Hyperion FDM and ERPi 11.1.2.2 Import failed with ERPI-FIN-E

Similar Messages

Maybe you are looking for