Hyperion Financial Reporting: Suppress Zero Data Row Not Work
Hi Geniuses,
The projects list report has sub-groups with subtotal rows. I put suppression on the data rows of projects based on whether it's X or Y; thus, all Ys are suppressed and only Xs remain. For a subgroup M, because M only has Y projects in it, so all data rows are suppressed; consequently, the subtotal row (formula row) of M is zero. However, even I put all the basic suppression on, the subtotal row still remains.
PS: I used the formula Sum(row[x]) and [x] to sum in the subtotal row.
Any idea how to suppress the subtotal row?
Thanks a bunch!
Dylan
Hi Dylan,
Could you try the following:
In the conditional suppression for the calculated row, define to suppress the calculated row if the data values of row(rownumber/one of the input rows) are suppressed, i.e. referring to another row's value and suppression and not to values of the calculated rows.
Choose a single input row for that not one which contains a range of members to test this. If such a row does not exist, insert a single row, which is representative in this circumstance, and hide it. I tried to reproduce your case, but it works with the simple suppression in my test, so not much help to you, of course. Sometimes it's an idea just to export the grid to a new report and start from the beginning with a limited example.
Mr D.
Similar Messages
-
Financial Reporting - PDF Table of Contents not working
I am using FR to run scheduled batches each weekend. Some of the books are over 100 pages in length and we have a Table of Contents (TOC) with each book created. The page numbers within the TOC are correct and correspond to the correct report. However, when clicking on the page number in the TOC, it takes us to the incorrect location. It can be a page or two off or it can be 10 pages off. Has anyone experienced this problem? If so, how did you resolve it?
We are on 11.1.2.1 in Prod.Try with latest patch # 14406630 for 11.1.2.1 as it fixes page number issues.
-
Thread: In Hyperion Financial Reporting can we show comments entered in dat
Hi,
I want to show comments in Hyperion financial reports. The data form are against BSO cube and when users enter comments in it they want to see in reports which are against ASO.
Also, if you can help me if it is possible against same cube?Hi,
I think we can't show it in ASO, but if we have a BSO cube then we have to connect our reports with the Planning data source instead of an Essbase data source and specify on the report to show supporting detail.
You have to do some settings in the FR_Global.properties which are:
AllowCellTextAsAnnotation=true, the Cell Text check box on the Report Property sheet is shown (for Financial Management and Planning, not Essbase yet). The default setting will be unchecked (turned off).
AllowPlanningUnitAnnotationsAsAnnotations=true, the Planning Unit Annotations check box on the Report Property sheet is shown for Planning. The default setting will be unchecked (turned off).
AllowDocAttachmentsAsAnnotations=true, the Document Attachments check box on the Report Property Sheet is shown for Financial Management. The default setting will be unchecked (turned off).
Hope this helps.
Regards
SST..... -
In Hyperion Financial Reporting can we show comments entered in data forms?
Hi,
I want to show comments in Hyperion financial reports. The data form are against BSO cube and when users enter comments in it they want to see in reports which are against ASO.
Also, if you can help me if it is possible against same cube?Hi,
I think we can't show it in ASO, but if we have a BSO cube then we have to connect our reports with the Planning data source instead of an Essbase data source and specify on the report to show supporting detail.
You have to do some settings in the FR_Global.properties which are:
AllowCellTextAsAnnotation=true, the Cell Text check box on the Report Property sheet is shown (for Financial Management and Planning, not Essbase yet). The default setting will be unchecked (turned off).
AllowPlanningUnitAnnotationsAsAnnotations=true, the Planning Unit Annotations check box on the Report Property sheet is shown for Planning. The default setting will be unchecked (turned off).
AllowDocAttachmentsAsAnnotations=true, the Document Attachments check box on the Report Property Sheet is shown for Financial Management. The default setting will be unchecked (turned off).
Hope this helps.
Regards
SST..... -
Comparing strings in IfThen() structure of Hyperion Financial Reporting
Can we compare current value of a dimension with a string in the IfThen() structure in hyperion financial reporting tool? I have not been able to carry out the same successfully. Also, I need to get value from a partcular cell to use in IfThen() condition but it takes only row number and not a cell (e.g. IfThen([1]=0,1,2) and not IfThen([1,B]=0,1,2)).
Is there any way in which we can solve these issues?
Regards
Edited by: N.S. on Apr 26, 2011 12:25 AMNeville,
Page 48 of this link
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
JTS -
Hi,
We recently went live with an implementation of 11.1.2.2 and have build large report suite in Financial reporting to accompany the release. Over the weekend we patched up to 11.1.2.2.305.4195 however we have began to notice our FR reports are failing to generate and hang at a white screen for both HTML and PDF views.
After a little digging it looks that the issue is with any report that has suppress #missing on rows. If I take this suppression off the report will generate successfully. This is not an acceptable solution for us as many of our reports will run into 100's/1000's of lines.
Has anyone else experienced this recently and if so, are there any other fixes to be suggested. I'm assuming this is a bug introduced with 11.1.2.2.305
For reference we are also running the following versions.
Reporting and Analysis Framework - 11.1.2.2.000.998
Oracle® Hyperion Financial Reporting, Fusion Edition - 11.1.2.2.0.0387
GrahamHi, We have but awaiting a response. Interestingly I've did some testing and suppression does work if I go via the advanced suppression option which although a inconvenient to rework the reports does give a solution.
Additionally I've noticed a couple of other issues with suppression across the application so looks to be more widespread.
1) Webforms are no longer suppression #missing both in the application and also when downloaded to Excel.
2) Intercompany reports no longer suppress when we set tolerance to say 10% etc.
Each in itself can be worked around but annoying non the less. -
Hyperion Financial Reporting - Export to Excel converting Data to Text
We are using Hyperion Financial Reporting 11.1.2.2 with Hyperion Workspace 11.1.2.2 reporting on an ASO Essbase cube version 11.1.2.2.
When we export a report to Excel any data values that are displayed in the report with a negative ('-', '()', etc.) sign come into Excel as a text value. The cell has the green flag and the single quote in it denoting this a text field. The format is listed as 'Custom'. Updating the format does not remove the single quote.
The same result is happening if we display the natural sign in the report or if we flip the sign in the report. This DOES NOT happen when choosing the export query ready, only when using the File -> Export -> Excel.
Does anyone know if there is a hot fix or service pack or configuration to resolve this? How about a work around?
I thought I remember this happening in 9.2 and being resolved in 9.3. We have recently upgraded from 9.3.1 to 11.1.2.2 and the issue is happening again.
The users would like to export the formatted report to Excel and be able to interact with the data cells as numbers.The issue is reported as a bug. Installing patch 14625370 (11.1.2.2.302) and/or 16088101 (11.1.2.2.303) should fix the problem.
-
Hyperion financial reporting hierarchical structure of the rows
Hi All,
I am using hyperion financial reporting for creating reports.
I have a prompt for account in the row dimension and according to the selection of the
row dimension the tree like structure will come for the member selected.
I am getting the tree stucture but it is like an inverted tree structure.
What should i do to get the correct tree structure?
ThanksIf you are descendants of accounts, it is not possible. However, try IAncestors of level 0 account. I never tried that.
Good luck!
Venu -
What HFM Table contains the Hyperion Financial Reporting Modify Date
Does anyone know the name of the HFM table that contains the Hyperion Financial Reporting Modify Date field of a Report?
Thanks!
Edited by: user2609991 on Sep 1, 2009 8:49 AM1. no "HFM Table" stores any information about Financial Reporting reports. Financial Reporting is part of the "BI+" / "Reporting and Analysis" product, so if there was any information to be found in a relational database, it would be in the BI+ schema not the HFM one.
2. Oracle / Hyperion do not support customers trying to build their own relational database integrations directly into product repositories. To interact with the BI+ product (e.g. to extract modified by dates of FR reports) you should read up on the API and write custom code using that API. More information can be found in the Developers Guide here http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_developer.pdf and in the "javadoc" documentation that comes with the BI+ product. -
I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
When I enter the value , it just vanishes. Am I missing something here.?
I need to set export path for PDF generation in Hyperion financial report for batches.Edit FRConfig.cmd and update
set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
update epmsystem1 to the correct epm instance name
Cheers
John
http://john-goodwin.blogspot.com/ -
Hyperion Financial Reporting-Print Service is not Starting-11.1.2.1
Hi,
We are using Hyperion 11.1.2.1 and when i look at my Hyperion Financial Reporting-Print service it shows me at stopping and when i right click to stop/start it the options are greyed out.
I have completely stopped all the hyperion services and started them again and now the HFR Print service is showing me as Starting.
Kindly help me what should i do to resolve this issue.
You can see the screen shot at my blog.
http://hyperion-consulting.blogspot.in/2012/08/hi-we-are-using-hyperion-11.html
Regards,
AS
Edited by: Don'tKnow999 on Aug 30, 2012 9:52 PMHi John,
Thanks a lot for your reply. I saw the log file however i am not able to understand where the issue lies. Can you kindly hlep me out. Below is the FRPrintLogging.log
[2012-08-31T02:42:54.565-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T02:42:54.565-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:12:21.914-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Oracle Workspace
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Copyright© 2000, 2011 Oracle and / or its affiliates.
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] All Rights Reserved.
[2012-08-31T03:13:46.993-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:249)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:80)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:122)
at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.011-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.025-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
]] -
Hyperion financial reporting studio not responding
hi all,
I have Hyperion financial reporting studio "client" (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
The machine configuration is:
P4 3.0 GHz and 1 GB RAM.
When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
CPU usage:fluctuates between 45 - 100% which was initially 1%
PF usage:jumps to 1.32GB which was initially 362MB
Physical memory available : drops down from 762188(K) to 1728(K)
application status: Not responding
AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .There is no error log created ??
I cannot proceed further. Please help me out...
Thanks in advancePlease post these type of queries to Hyperion BI Workspace & Reporting module
-
Hyperion Financia reporting ..Conditional Suppression
We have user POV as Scenario in financial reporting. User can select Current budget or Next budget as scenarios.<BR><BR>If the selected budget is current, then report should display years in column as FY07, FY08, FY09, FY10, and FY11.<BR><BR>If the selected budget is next, then report should display years in column as FY08, FY09, FY10,FY11,FY12.<BR><BR><BR>How do we achieve this in Hyperion Financial reporting 9.2?<BR><BR><BR>Thanks,<BR>Manohar Anchan<BR>
Thanks a lot for your suggestion.It worked except for some formatting issue .I wanted every month to be in seperate column.As far as Current variable being set to Dec is concerned , I need to figure that out.Atlesat I got some lead to start with.........<BR><BR>Thanks,<BR>Mnaohar Anchan
-
Create unit cost reports in Hyperion Financial Reporting
Hi,
I have some doubts regarding the creation of "per unit" reports in Hyperion Financial Reporting. In the business model we have:
- different cost and revenue groups (identified by accounts dimension)
- different business channels (identified by business channel dimension)
- units different for each business channel (identified by accounts dimension and by currency dimension)
What would be the most efficient way to easily construct per unit reporting? Reporting should be able to show data as:
(*in principle, the "$ per unit" column is the most important one. The other columns could be hidden without problem)
(**the main challenge is to be able to easily reflect per unit values calculated with different units, depending on the business channel and potentially other dimensions)
More precisely, the questions are:
1. What should be the dimensions structure? Units in separate dimension? Or inside accounts dimension and differentiate with currency dimension?
2. The calculation of per unit amounts should be done within the reporting or should it be precalculated value?
2a. If within reporting - how to technically include this calculations? Show $ and units and then use the formula?
2b. If precalculated - how to solve the problem that the TOTAL per unit values are not the sum of per unit values for each Business channel separately (as each Business channel has its per unit calculated only with the units of this Business channel)? (please take into account that Business channel may not be the only dimension that changes the units to be used in per unit calculation - we can also have different units for different cost centers etc.)
3. How to show $ and units separately, as in the example, if, when limiting a row by Revenue, for example, is making the units value for this row 0? How to overcome this?
Many thanks in advance for your help and best regards,
PawelI came up with one concept of how to deal with this problem - let me know what you think. The idea is pictured in the image below:
The answers to the 3 questions using this solution would be:
1. What should be the dimensions structure? Units in separate dimension? Or inside accounts dimension and differentiate with currency dimension?
Units would be a separate account in the "accounts" dimension. But also, units could be differentiated by the "currency" dimension.
2. The calculation of per unit amounts should be done within the reporting or should it be precalculated value?
2a. If within reporting - how to technically include this calculations? Show $ and units and then use the formula?
Withing the reporting, as I have no solution to precalculate per unit values using so many different groups of units - if we want to have different per unit per each business channel or cost center etc. I understand we would need that many different precalculated "per unit" values, which would be a lot...
Regarding 2a, a simple formula would do (box C). However, for rows with auto totals, the formula would need to have priority over the autototals (box D) - how is that done? Is it possible and easy?
3. How to show $ and units separately, as in the example, if, when limiting a row by Revenue, for example, is making the units value for this row 0? How to overcome this?
As we can differenciate units using both accounts and currency dimension, with the accounts placed in rows, the elements selected would always include the units (box A). Then, in the columns, using "currency" you would choose whether to show the cost and revenue accounts ($) or units (box B). Like this you would not get 0 in units, neither you would distort $ amounts.
What is your opinion? Best regards! -
Hyperion Financial Reporting: Trial Balance Report
Hi All,
I am a beginner in Hyperion Financial Reporting. I am trying to create a report for Trial Balance accounts.
The report should have the all the accounts in the rows and two columns with DEBIT and CREDIT without any other dimensions in the columns.
I could not setup this grid because we need to have a dimension in the column. It is fine for me to have Period dimension or something like that. But the point is, I dont know how to retrieve the Debit / Credit in two columns.
I thought a lot to see if we can do this with sign of the data or the type of the accounts. But could not get an idea.
Does this require any customization in FR? Is there anyway to achieve this?
Debit Credit
Account 1 1000
Account 2 1000
Account 3 1000
Account 4 1000
Variance 0 0Hi,
Let me understand your issue here. You have Trial balance report which has 2 column: Debit and Credit. What connection do you have ? Is it Planning, HFM or other sources ? Normally, when you are using dimension, you should have another dimension, apart from Account that consist of Debit and Credit, which you can call during reporting design. The only requirement when you build a standard reporting with FR or Smartview is you need to place 1 dimension in row and 1 dimension in column. If you are using Hyperion, such as Planning and HFM, you should have more than 1 dimension.
If you don't store any Debit/Credit data, then you won't be able to get that. As far as I know, this Debit/Credit exist in Trial balance report, which is an extraction from GL. When FDM or other ETL tool pushes this data as a base data for HFM, the Debit/Credit data will be translated as plus/minus data in HFM. Say, Cash in TB closing should be in Credit. In HFM, this cash displays in positive value. Otherwise, if Cash in TB closing is in Debit, then in HFM, this should be negative. But this rules will apply differently to other accounts.
I hope this help.
Regards,
Anna
Maybe you are looking for
-
Hi, I need some help getting my film in sync to a D5. The film was shot on MiniDV and edited drop frame (29.97). What we did first is output on miniDV and dubbed that to a D5 for color correction. Everything was in sync with the timeline. Then my fri
-
845PE Max won't detect X800 AIW
I'm having an issue with my old 845PE Max mobo. I've had the Radeon X800 All-In-Wonder work before on this mobo, but after a recent format the card just won't budge! The mobo detected the card as a plug & play gfx card and everything went smooth, but
-
How can I read an input which only contain the 26 upper case letter
Are there any method that can read an input which only contain 1 character and it is in upper case too. should I use readChar( ), or readString( )?? How should I implement them if I do use one of them? thx
-
I can run everything through the usb port, including another manufacturer's 4G stick. The 4G stick that doesnt work on my Air works on my son's. The only difference I can find? Mavericks!
-
Premiere pro cc2014 problem with workspace
Hi everyone ! I have some issue with Premiere, and its workspace.... Each time (except some "random" times) a new project is open, there is a problem with the composition of the workspace. Each windows move in an odd way that i dont understand... And