Hyperion Hub 7.2.5 - Unable to retrieve groups

Please can someone help with Hub...
I have configured Hub I believe with MSAD, but when I click on the "Users and Groups" option from the website I get the message "Unable to retrieve groups" and it will not allow me any further.
Please help... using Hub 7.2.5 - No other Hyperion products installed at present.
Regards
John

Hi,
first sysc the openLDAP and then create a new group and assign the users.
thx
sri

Similar Messages

  • ISE is unable to retrieve groups and attributes

    Hello guys,
    I have Cisco ISE installed on EXSi in a lab. I was able to join the ISE server to my test Active Directory server, and under the OU=Computers, I can see my ISE hostname.
    However, when I go to Administrator > External Identity Sources > Active Directory > Groups > Add > Select Group from Directory:
    I have my domain entered in Domain box and an * for filter. When I clicked the "Retrieve Groups" button, I always received "Number of Groups Retrieved: 0 (Limit is 100)"
    It seem like ISE is unable to retrieve the groups that I have on my AD. I checked the status of my ISE server and it says that it is still connected to the domain. When I search for attributes, it keep saying that the user is not found.
    I disabled my AD's firewall and still getting the same results. I ran the detailed test connection, and it was a success and the port connections are all good. At this point, I am pretty much stuck.
    Any help would be greatly appreciated.
    Thanks

    I am sorry Jatin. I have another question.  I am working on Motorola RFS7000 WLC and Cisco ISE v1.1.1.
    I am not sure if I should create a new thread about the new issue I am having now.  I have successfully added my RFS controller and one AP7131 to ISE Network Devices. And I am able to login to these devices using my AD account. However, it is not allowing me to manage these devices.  I believe I am at exec mode. I SSH to my RFS and I can't even get to enable mode.

  • Issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005

    Hello Experts,
    One of my customer has an issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005.
    "We are trying to configure the SQL server 2005 database with Hyperion hub and we are unable to get the cofiguration completed. We suspect the driver class (hyperion.jdbc.sqlserver.SQLServerDriver) used in the domain.xml (path \Hyperion\HyperionHub\7.2.1\deployments\Tomcat\4.1.30\) is not helping to connect with sql server 2005. We would appreciate if you can provide new driver class which we can included while deploying the app under the web server."
    Please suggest. Thanks in advance
    Regards,
    Sonu

    Hi
    Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
    Thanks
    Rupak
    Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

  • Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing

    Hi
    I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
    I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
    and
    The File's Properties > Security tab is missing
    Does anyone know my issue?
    Thanks,

    Hi Experts,
    You told its resolved.how?
    I am having the same issue i am unable to retrive the tables.
    "Database:MS SQL Server
    Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
    Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
    Please help if you have resolved this issue.Any helpful links plz forward [email protected]
    Thanks

  • Error :Unable to retrieve data from iHTML servlet for Request2 request

    I open bqyfile to use HTML in workspace.
    When I export report to excel in IR report.
    Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
    And I can not open any bqyfiles in workspace.
    Anybody gat the same question? Thanks~

    Hi,
    This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
    http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
    Hope this helps..

  • Hyperion Hub external authentication issue

    I have Hyperion Hub installed in an Active Directory domain - the users still live in a NT4 domain (we are in the midst of a migration). I have set up trusts between the two domains. We have been utilizing external authentication with Hyperion Reports in this environment for several months. With Hyperion Hub I have setup two authentication providers one for active directory(NTLM) and one for NT4 (NTLM). When adding users in the Hyperion Configuration Console using the provider for NT4, I am only able to pull up users in the "Available Users" list if I have a '*' in the search box. If I try to perform a query of a subset of users (ie. 'g*') it returns nothing. The provider for Active Directory works correctly. Also, with both of the providers I am unable to pull up a full list of available users - even when setting the "Maximum Size" to a large number. Has anyone else come across this???<BR><BR><BR>Greg

    I would suggest you set autoLogin="false" on rtc:ConnectSessionContainer and call cSession.login() when you are ready (you got the token and have everything set up).
    I suspect the automatic login is getting executed before the AdobeHSAuthenticator has been correctly setup.

  • Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

    Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

    Sync with "new" computer
    https://discussions.apple.com/docs/DOC-3141

  • Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data.  Can someone help?

    Hi, going crazy.  Can't get this fixed.  Unable to retrieve contact info from synch server.  I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
    I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step....  any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
    Pinina in Phoenix, Az

    Hi, going crazy.  Can't get this fixed.  Unable to retrieve contact info from synch server.  I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
    I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step....  any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
    Pinina in Phoenix, Az

  • XML Report completes with error due to REP-271504897:  Unable to retrieve a string from the Report Builder message file.

    We are in the middle of testing our R12 Upgrade.  I am getting this error from the invoice XML-based report that we are using in R12. (based on log).  Only for a specific invoice number that this error is appearing.  The trace is not showing me anything.  I don't know how to proceed on how to debug where the error is coming from and how to fix this.  I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch.  I created exactly the same order and interface to AR and it doesnt generate an error.  I even copied the order and interface to AR and it doesn't complete with error.  It is only for this particular invoice that is having an issue and I need to get the root cause as to why.  Please help.  I appreciate what you all can contribute to identify and fix our issue.  We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime.  However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
    MSG-00100: DEBUG:  Get_Country_Description Return value:
    MSG-00100: DEBUG:  Get_Country_Description Return value:
    REP-0002: Unable to retrieve a string from the Report Builder message file.
    REP-271504897:
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-271504897: MSG-00100: DEBUG:  BeforeReport_Trigger +
    MSG-00100: DEBUG:  AfterParam_Procs.Populate_Printing_Option
    MSG-00100: DEBUG:  AfterParam_Procs.Populate_Tax_Printing_Option
    MSG-00100: DEBUG:  BeforeReport_Trigger.Get_Message_Details
    MSG-00100: DEBUG:  BeforeReport_Trigger.Get_Org_Profile.
    MSG-00100: DEBUG:  Organization Id:  117
    MSG-00100: DEBUG:  BeforeReport_Trigger.Build_Where_Clause
    MSG-00100: DEBUG:  P_Choi
    Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.

    Hi,
    Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
    If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
    Regards,

  • Unable to retrieve Object.  Failed to load database information

    I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
    CrystalReportViewer
    Error in File 180+DAYREP.EWARP: Failed to load database information.
    Unable to retrieve Object.
    Error in File 180+DAYREP.EWARP: Failed to load database information.
    I have done some research on this but no luck on resolving the issue.
    Any suggestions are welcome thanks.

    First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
    I tried to ping my database and was unable to find the host.  I was under the assumption it was using TNSNames which is able to resolve. 
    How can I validate the permissions?
    As I said I'm a little lost here.  Apologies if I ask stupid questions.

  • Unable to retrieve nametab info for logic table BSEG during Database Export

    Hi,
    Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
    I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
    more SAPCLUST.log
    /sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
    /sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
    $ SAP
    /sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
    Compiled Aug 13 2007 16:20:31
    /sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
    PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
    /sapmnt/BIA/exe/R3load: job completed
    /sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
    /sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
    /sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
    $ SAP
    /sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
    Compiled Aug 13 2007 16:20:31
    /sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
    R/SAPCLUST.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (GSI) INFO: dbname   = "BIA20071101021156                                                                               
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "tinsp041                                                    
    (GSI) INFO: sysname  = "HP-UX"
    (GSI) INFO: nodename = "tinsp041"
    (GSI) INFO: release  = "B.11.11"
    (GSI) INFO: version  = "U"
    (GSI) INFO: machine  = "9000/800"
    (GSI) INFO: instno   = "0020293063"
    (EXP) TABLE: "AABLG"
    (EXP) TABLE: "CDCLS"
    (EXP) TABLE: "CLU4"
    (EXP) TABLE: "CLUTAB"
    (EXP) TABLE: "CVEP1"
    (EXP) TABLE: "CVEP2"
    (EXP) TABLE: "CVER1"
    (EXP) TABLE: "CVER2"
    (EXP) TABLE: "CVER3"
    (EXP) TABLE: "CVER4"
    (EXP) TABLE: "CVER5"
    (EXP) TABLE: "DOKCL"
    (EXP) TABLE: "DSYO1"
    (EXP) TABLE: "DSYO2"
    (EXP) TABLE: "DSYO3"
    (EXP) TABLE: "EDI30C"
    (EXP) TABLE: "EDI40"
    (EXP) TABLE: "EDIDOC"
    (EXP) TABLE: "EPIDXB"
    (EXP) TABLE: "EPIDXC"
    (EXP) TABLE: "GLS2CLUS"
    (EXP) TABLE: "IMPREDOC"
    (EXP) TABLE: "KOCLU"
    (EXP) TABLE: "PCDCLS"
    (EXP) TABLE: "REGUC"
    myCluster (55.16.Exp): 1557: inconsistent field count detected.
    myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
    myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
    myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG   
    myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG   
    myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
    myCluster: RFBLG      *003**IN07**0001100000**2007*
    myCluster (55.16.Exp): 318: error during conversion of cluster item.
    myCluster (55.16.Exp): 319: affected physical table is RFBLG.
    (CNV) ERROR: data conversion failed.  rc = 2
    (RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
    (DB) INFO: disconnected from DB
    /sapmnt/BIA/exe/R3load: job finished with 1 error(s)
    /sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
    /sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
    /sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
    $ SAP
    /sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
    Compiled Aug 13 2007 16:20:31
    /sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
    R/SAPCLUST.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (GSI) INFO: dbname   = "BIA20071101021156                                                                               
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "tinsp041                                                    
    (GSI) INFO: sysname  = "HP-UX"
    (GSI) INFO: nodename = "tinsp041"
    (GSI) INFO: release  = "B.11.11"
    (GSI) INFO: version  = "U"
    (GSI) INFO: machine  = "9000/800"
    (GSI) INFO: instno   = "0020293063"
    myCluster (55.16.Exp): 1557: inconsistent field count detected.
    myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
    myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
    myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG   
    myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG   
    myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
    myCluster: RFBLG      *003**IN07**0001100000**2007*
    myCluster (55.16.Exp): 318: error during conversion of cluster item.
    myCluster (55.16.Exp): 319: affected physical table is RFBLG.
    (CNV) ERROR: data conversion failed.  rc = 2
    (RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
    (DB) INFO: disconnected from DB
    SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
    /sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
    og (97%)
    The main eror is "unable to retrieve nametab info for logic table BSEG "  
    Your reply to this issue is highly appreciated
    Thanks
    Sunil

    Hello,
    acording to this output:
    /sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
    R/SAPCLUST.log -stop_on_error
    you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
    Best Regards,
    Michael

  • Unable to retrieve tables from this connection

    I have been using Dreamweaver for over 5 years. I have been
    using an Access database and ASP the entire time. I am using a
    Windows 2000 server for the database and web site. I have used
    every verson of Dreamweaver since Ultra Dev. When I bought verson 8
    and upgraded to 8.0.2, I began getting the following message when I
    try to edit or create a recordset.
    "Unable to retrieve tables from this connection, click on the
    'Define...' button to test this connection."
    I don't know what to do. Is this a widespread problem? Is it
    a Windows problem? Is it a Dreamweaver problem? Is it a network
    problem?
    Please HELP!

    Did you ever get an answer for this ?
    I am having the same issue but using XP professional.

  • CrystalReportViewer Failed to Open the connection Unable to retrieve Object

    I am getting the following Error on trying to view a report in the CMC and the Infoview.
    CrystalReportViewer
    Failed to Open the connection. ReportName
    Unable to retrieve Object.
    Failed to open the connection. ReportName
    I have recently re-installed Crystal Reports Server XI  on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
    I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
    Any help would be appreciated.

    I am tagging into this unanswered question as well because I think I have a similar issue.  In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report.  In have used "Set data location" to no avail.  When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice.  The group of reports under one of the datasources works correctly.  The reports listed under the second datasource all fail.  The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
    I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
    Any ideas?
    Thanks!

  • REP-0002: Unable to retrieve a string from the Report Builder message file;

    Hi,
    I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
    For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
    OPP log for the same gives an output as under:
    Output type: PDF
    [9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
    Report Builder 10g
    BI Publisher's version : 4.5.0
    RDBMS Version : 10.2.0.4.0
    Oracle Applications Version : 12.0.6
    Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
    Thanks,
    Bhoomika

    Metalink <Note:1076529.6> extracts
    Problem Description
    When running a *.REP generated report file you get errors:
    REP-00002 Unable to retrieve string from message file
    REP-01439 Cannot compile program since this is a runtime report
    Running the same report using the *.RDF file is successful.
    You are running the report with a stored procedure,
    OR you are running against an Oracle instance other than the one developed on,
    Or, you recently upgraded your Oracle Server.
    Solution Description
    1) Check that the user running the report has execute permissions on any stored
    SQL procedures called. <Note:1049458.6>
    2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
    version of the report. <Note:1012546.7>
    3) Compile the report against the same instance it is being run against.
    <Note:1071209.6> and <Note:1049620.6>

  • Problem: Unable to retrieve workflow data from MDM repository

    This is a new MDM installations scenario for version 5.5 SP05 (5.5.40.83).
    After installing MS Visio, finding problems connecting it with the MDM Data Manager. After doing MDM workflow installations, able to initiate the MS Visio Workflow from MDM Data Manager and can see the Pane-MS Visio Workflow Stencil but not the able to see the Pane-MS Visio Workflow Stencil Details that appears below the Pane-MS Visio Workflow Stencil. Secondly geting a pop-up with the error message as - 'Unable to retrieve workflow data from MDM repository.'
    I have added a parameter Mail Server=MailServerIPAddess (the existing IP addr), but it hasn't helped.
    Can any one please help me in this !

    Hi
    As Felix mentioned, it might be a version compatibility problem.
    You have also mentioned that mail server is not working for that  do this
    Mailserver = SMTP server.company.com ( ex. Mail.company(xxxxx).com)
    MDM workflow notify task is working after rebooting the Machine. So the rule is after making changes to MDS.ini file reboot the machine ,to observe the consequence of configurable changes.
    If u need anything this let me know.
    Regards
    Hari

Maybe you are looking for