Hyperion installation on windows xp sp3

hi all
I need to install hyperion on my laptop( 2GB ram 500GB HD), is there any installation guide and are my hardware resources are enough to run the software properly?
thanks for help

I've been happy with 8GB RAM on a HP Pavilion dv6 with quad-core i5 2.3GHz. I'm running 64-bit Windows 7, 64-bit Oracle 11g, WebLogic, IIS, Oracle HTTP Server, Oracle Access Mgr, BPEL, DRM 11.1.2, DRM WDK, etc. and I can productively work on email, documents, presentations, etc. with all of that running. With 4GB and a dual-core processor you can get it running but your machine will struggle at times. When I bring up the Oracle database and the DRM service, before any versions are loaded my machine is utilizing over 5GB RAM.

Similar Messages

ITunes 10.5.3 Installation on Windows XP SP3: hanging on "Registering iTunes Automation Server"

I have uninstalled successfully iTunes 10.5.1 from my notebook and reinstalled iTunes 10.5.3.3. Unfortunately, in reinstallation process, iTunes is hanging on "Registering iTunes Automation Server" for over 3 hours!!!!!!!! Quicktime, Safari, Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update are all reinstalled successfully!!! WHAT's the problem for my notebook? How to overcome this issue??? Please help me !!!!!!!!!!!!!!!!!!!!
System:Windows XP SP3
Apple iPhone 4S, iPad 2, iPod Classic

Noboday has ideas about this issue???

11GXE beta: Failed Installation on Windows XP SP3 with No errors

After struggling to understand why my database can't be started it appears that there was a series of errors during installation that left behind a 'crippled' instance with nor control or data files. NONE of this was reported by the Installation wizard. Only after digging into log files I'm able to see the extend of this failure.
I'm tracing this from the C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\XE.bat file that is used to configure the server
So looking at sequential log.
C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.then three scripts are executed
C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\CloneRmanRestore.sql
C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\cloneDBCreation.sql
C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
The first one appears to fail and then of course the rest follow:
Here is the created log
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-28056: Writing audit records to Windows Event Log failed
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
ORA-01075: you are currently logged on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
Many of the other logs contain mostly the echoed SQL staements and SP2-0640: Not connected
I'm thinking re-executing the XE.bat to recover. Any feedback?

I'm not sure that executing restore script will help.
imouts wrote:
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-28056: Writing audit records to Windows Event Log failedOn your place I would try to repeat clean installation, but before that increase the log size -> clear the event logs.
Control Panel --> Administrative Tools --> Event Viewer --> Clear All Events
Hope this helps.

Hyperion Installation : Supported Windows OS

Can anyone please tell me, that which versions of Windows are supported for System 11.1.1.3?
Thanks & Regards,
Amit

The install docs under this link should give you a good idea:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_1.htm
Cheers,
Rocky.

NI 488.2 - 3.1.1 installation error (windows 7)

Hello,
I tried to install the NI 488.2 driver to connect an GPIB-USB-HS device on my computer.
All my try were unsuccessful (execute as administrator, desactivate my antivirus software,...).
The joined messages appeared.
Thank you in advance for your advices
Solved!
Go to Solution.
Attachments:
Message.7z ‏61 KB

Hi FJNI,
I can't open *.7z files so i don't know what king of error message poped up while trying to install NI 488.2.
Is there any previous version of this driver already installed on your computer ? In this case, try to uninstall the driver and run again the 3.1.1 installer.
Did you download the driver from our website ?
http://joule.ni.com/nidu/cds/view/p/id/3786/lang/en
Could you try running the installer in windows Xp SP3 mode ? you can set this by right clicking on the installer, selecting "proprties menu" and going to "compatibility" section, Here is what it looks like (on a French windows 7 64 bits).
I hope this will help you,
Best regards
Vincent.O
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Windows XP SP3 Freezes After Installation of Nvidia Quadro FX3000

Greetings to all! I have an older Dell running Windows XP SP3. It had an Nvidia Quadro FX1000 which began going bad and I replaced with a Quadro FX3000 model. The drivers I downloaded from Nvidia's web site were the most recent qualified
drivers (yep, they were old, but still the correct drivers). After of the installation of the card and the drivers Windows boots normally to the logon screen. After typing in my password Windows tells me its loading my personal settings, then freezes
with no further activity. I'm unable to use the mouse at that point and can't shut down gracefully.
I can boot successfully into Windows via Safe Mode and log on using my password. However, the system always hangs after logging on when I just boot straight into Windows without using safe mode.
Can anyone weigh in with a possible reason for this to occur. It's driving me crazy. I'm sure the answer is right in front of me, I'm just not seeing it.
Thanks in advance!

Hi!
I know its almost a month since you posted, but I would boot in to safe mode, remove the display drivers and install an older version of the driver. For instance the driver that was released before the latest one.
This has done the trick for me a few times with other hardware!
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

ITunes not installing, Window XP SP3. Warning reads "The feature you are trying to use is on a network resource that is unavailable. Enter alternate path to folder containing installation package"iTunes.msi.

iTunes not installing. Windows XP, SP3. Mesage reads:" The feature you are trying to use is ona network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.msi in the box below. iTunesSetup.exe shows in my download folder, but it will not install.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

A few red flags before Windows XP SP3 Installation

Hi,
I am pretty much ready to install Windows XP SP3 onto my Mac Book Pro with Leopard (OS X 10.5.8), or at least I thought I was. A couple issues I've ran into before installation are the following; I've read that the installation of Boot Camp 2.1 (I have 2.0) is required before installing Windows XP Service Pack 3, however the Boot Camp update (BCUpdateXP.exe) is an exe file which I currently cannot open on Mac OS X. I found another topic mentioning to install the BC update after installing Windows, but this is contradicting. Is there a way to install this update file either through a dmg (which I could not find) or some sort of exe reader/expander?
Another issue is the 'Macintosh Drivers CD', or lack thereof. I know the official Boot Camp Installation & Setup Guide states to use either the Mac OS X Leopard disc or the Mac OS X Install Disc 1 for the driver installation, but in other tutorials it states you can have the option to create a 'Macintosh Drivers CD' or DVD within the initial Boot Camp stages (I have a hunch this was only for the beta version(s)). I don't have the Mac OS X Install Disc 1 on me, so I was wondering if there is any other way to make the drivers cd in order to install the proper Boot Camp drivers for Windows.
The last resort is somehow obtaining the Mac OS X Install Disc 1 and Windows XP SP2 (funny how it says in the Setup Guide that Service Pack 2 is required for installation, and later on it says the same thing 'or later.')
Any comments or suggestions will be helpful.
Thanks in advance.
Brendan

Basically, SP2 is the MINIMUM any Boot Camp version will install. It has to be on the Installer disk as part of XP. You can't add SP2 later. Upgrading from SP2 to SP3 isn't supported by BootCamp 2.0 so you need to update to 2.1 or later.
If you already have Window XP-SP2 already installed on the HD then all you have to do is just update Boot Camp while booted into Windows. Control Panel/Scheduled Tasks/AppleSoftwareUpdates and it should update everything for you. If not then download 2.1 and install it on the Windows side.
http://support.apple.com/kb/DL830
"""Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers _onto your already installed Windows OS_."""
Boot Camp is actually a Windows program, it installs all the Apple hardware drivers for Windows to use.

Everytime Adobe Reader 9 is extracting installation files, about half way, Windows XP SP3 reboots

Everytime Adobe Reader 9 is extracting installation files, about half way, Windows XP SP3 reboots. Therefore, I am unable to install the Adobe Reader on my computer. I would appreciate any help you can provide.

Thanks for the replies. I have followed most of the suggestions given in "Test Screen Name" response. Unfortunately, I have not been able to correctly identify and eliminate rootkit infections (viruses), if any. Furthermore, even when I try to install Adobe Reader X, the system freezes when about 53% of the installation is complete. I am still trying to figure this problem out.
Good news!
I just installed Adobe Reader 11 and it worked beautifully!
Thanks again for your suggestions.

How to correct installer resetting minimum restriction to windows XP SP3 or later

I am using Labview 2009 and building executables and installers that go onto systems that use windows 2000 and Windows XP SP2 and below.
Whenever I build my installer package, I get a warning:
*** WARNING ***
Cannot enforce the requested minimum operating system restriction because the deployment engine only supports Windows XP Service Pack 3 or later. Resetting minimum restriction to Windows XP Service Pack 3 or later.
I did not previously have this issue, until I recently got a new computer (windows XP => Windows 7) and had to reinstall all of my Labiew and NI systems. Ever since this, I have not been able to run my installers and executables on anything below windows XP SP3.
How can I fix this?
Solved!
Go to Solution.

crossrulz wrote:
I remember something about things built on Windows 7 can't work with anything before XP SP3. So I would say it is coming from the fact that you are now using Window 7.
I know it is easier said than done, but you do need to update your test systems. Computers are something that are (usually) very simple to update every 2-4 years.
In all fairness, sometimes it's the customer who applies the OS upgrade restriction. For instance, there may be some contracts that requre a recertification of a test station (and all of the software that is run on it) if anything is upgraded and they aren't willing to pay for it.
Of course, what happens then is that a piece of hardware finally breaks, that hardware has been obsolete for 20 years and any substitute hardware only has drivers for the last two operating system revisions, so you have to upgrade ANYway, but it's going to cost more money than if you did it in a controlled fashion because now you have a tester down and you are using it for your development instead of building a dev station to work all the bugs out.
[edit] Wow, was that all once sentence? I'm not proud of that... [/edit]
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3

Dear Friends,
I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimum requirement stated at the box of the HP Printers which means by rights, it should be no problems.
However, I sent and setup the printer at 4 branches only 1 is a success. others 3 centre is showing the same errors which is A Fatal Error Occured Preventing Product Use. I been trying to install using original CD provided by HP and driver provided at HP Support also given the same errors. The 1 Centre that OK PC spec is almost the same as the others 3 and all using default programs and software. So i dont knows what really is the problem.
This is the things i have done in hoping to successfully install the driver but WITH NO SUCCESS:
Clear temp file, disk cleanup, defragment disk and restart PC.
Reinstall Windows SP3 and restart PC.
Install basic driver only and using control panel > device and printer > add printer (Select Driver Manually). (See Pic Below)
Repair windows using original windows XP SP3 CD.
Re-Check for USB.INF file.
Repair Registry with reg cure.
Uninstall USB support and etc (Google), then re-install the printers.
Uninstall Antivirus, disable all startup and services.
Install using FULL DRIVER, BASIC DRIVER AND DRIVER MANUAL.
Sometime when running the installer, it will prompt the below error signature and HP installer will loading quite long and then crash, but others PC don't have this errors, it straight away to the installation menu until DETECTING PRINTER until 99% and shows errors "A Fatal Error Occured Preventing Product Use".
It seems that almost everythings i try cannot make the printer driver to be install. However, the SCAN driver is install successfully. Currently the printer only can PHOTOCOPY AND SCAN, without being able to print.
Please anyone which facing similiar issues to HELP ME. anythings i can do, to install the printer DRIVER.
THANKS!

Hi @gendit ,
I see that you are having issues installing several Laserjet Pro MFP M125A printers on several Windows XP computers. You are getting "A Fatal Error Occured Preventing Product Use". I can help you with this.
What version of .NetFrameworks do you have? Check Your DOTNET.
You might have to run the Windows Updates. I would update the .Netframeworks to 4.0.
I believe HP software piggy backs Internet Explorer. Should have at least Internet Explorer 6.0.
Please try these steps, most likely the wrong driver is getting installed, giving you the Fatal error.
Disconnect the USB cable.
Uninstall the printer software from the CD.
Run the software again, immediately after connecting the USB cable, follow this document to update the driver before it errors out again. A Fatal Error Displays During Software Installation.
If the issue persists, here is a document with some different steps to try.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Not able to open pdf and adobe reader on windows xp sp3.

Hello,
I am not able to open pdf and adobe reader on my windows xp sp3 computer. I have reinstalled adobe reader 11.0.3 twice, but, no luck. I would appreciate if you could help me in resolving this issue. Thanks in advance.
Regards,
Venkata

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

I have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3

i have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3. i am not able to install acrobat it is showing folowing error. my email id is [email protected]
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW024, DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW065: Display requirements not met for {0327A4BF-62BF-48BB-8928-B971B749E9E1} Creative Suite 6 Design Standard 6.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Rizwan,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html for information on how to review your installation logs

AutoInstall problems in Windows XP SP3 + IE8

I'm trying to autoinstall the JVM from a cab file using an OBJECT tag, but I have problems when I try in Windows XP SP3 + IE8.
My code is the following:
<OBJECT id="appletComprobarSoftware"
     classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
     codebase="http://java.sun.com/update/1.6.0/jinstall-6u15-windows-i586.cab">
</OBJECT>
If Java is already installed in the machine, the JVM installs correctly in the browser but, if it is not installed and it is downloaded, when the installation finishes, the browser turns into "no response" state and I must close it.
So if I try to execute an applet, using the code below, and java is downloaded because it is not installed in the machine, the applet will never execute since after java installation the browser must be closed.
<OBJECT id="appletComprobarSoftware"
          classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
          codebase="https://java.sun.com/update/1.6.0/jinstall-6u13-windows-i586.cab">
          <PARAM name="code" value="es.spee.arq.pub.firmadigital.DummyApplet.class">
          <PARAM name="archive" value="DummyApplet.jar">
</OBJECT>
I have tried with several java versions and the results are always the same, but the same code in Windows Vista or Windows 7 + IE8 works perfectly.
Do you know what is the problem and how to solve it??
Thank you very much.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Hyperion installation on windows xp sp3

Similar Messages

Maybe you are looking for