Hyperion Planning and eBusiness Suite ODI integration

Hi,
I have to integrate eBusiness Suite and Hyperion Planning, mostly exporting data from eBusiness Suite to load into Hyperion Planning. I'm allready using eBusiness Suite connectors.
I'd like to know if there is some start point to understand eBS model besides http://etrm.oracle.com. I found that the technical reference is not of much help to understand where I can find the proper info that I need or what kind of info provides each column/table.
Thanks!

Hi Pratik, thank you for your comment. Both links are very helpful. Although I think I wasn't precise enough on my initial post. Im trying to extract info from several modules of eBS (GL, PA, PO, INV, AP and others) to a single table and my approach for the extract is using one source set for each eBS module on ODI interface (with the corresponding tables from each module on each source set).
The main info I need on this approach is how to avoid exporting duplicate info, because I know that some info is present on several modules.
I hope I was clear on my explanation, do you have any advice on where can I get that info?. Thank you

Similar Messages

Oracle Hyperion Planning and Budgetting

We are planning to use the Oracle Hyperion Planning and Budgetting Product for our organization.And we are in the process of finding the best practice OR best suite Database software for Oracle Hyperion.
Which database software product is best suite for Oracle Hyperion Planning and Budgetting?
Our Source Systems
Oracle E-Business Suite R12
PeopleSoft Campus Solution
Appreciate your commnets on this matter... Thanks

Hi,
you can try the following:
Go to [http://service.sap.com/bosap-support] and navigate to Documention->Product Guides . Select SAP BPC and you should get the links to the related documentation.
If you still get problems to access it, you must issue a message to SAP (service.sap.com/support) asking them to allow you accessing the documentation on SAP BPC.
Regards,
Stratos

Hyperion Planning and Budgeting

Hi all,
I want to know about the hyperion planning and budgeting. Please guide me in it...

Hi,
you can do the same work in SEM-BPS as with Hyperion.Only difference being the integrity of the various modules.As well the integrity of SEM with BW is much more powerfull and versatile than Hyperion with BW.Only reason being its a third party software. Hyperion is another BI tool independant of SAP BW. It is not the same tool than the BEx analyzer used only for querying BW data
Suggestions:
BW data could be reported from Hyperion by connecting the system with the right adapter; the other way around isn't possible (querying hyperion data via BW) except by setting the hyperion DB as a DB/UD Connect source system and having remote IProviders on-top of it.
If you want ,you'll synchronize BW metadata in Hyperion and then create a report in Hyperion which will retrieve data from a BW query released for OLE/DB for OLAP (query properties/extended)
now you can access any BW query / cube / multiprovider in BW
Remember that hyperion has been bought by Oracle some months ago...
http://www.hyperion.com/solutions/environment/sap.cfm
Hope this helps,
Regards
CSM Reddy

Where can I download a trial version of Hyperion Planning and essbase?

I am new to Hyperion and want to train in it . Where can I download a trial version of Hyperion Planning and essbase?

Edeliver is where you go to download any of Oracle products. They are not trial versions. They are full versions. The license that you must agree to inorder to download them are for development and self-educational purposes only.
The main site is
https://edelivery.oracle.com/
From there you pick your language, identify yourself, and agree to the license agreement. Then, you select the product pack and OS of host system. Then, select the product you want to download. The products are splitup by component or modules. You must download everything you need. Foundation, Essbase, Planning, and Reporting and Analysis if you are going to do any reports.
Product pack - Choose Oracle Enterprise Performance Management System
OS - I use a 64bit OS, but choose the right one that you will be installing on.
Then choose,
Oracle Enterprise Performance Management (*11.1.2.0.0*) Media Pack for the OS you choose
Once you have downloaded the required packs, unzip them all into one folder. Merge the folders together and copy and replace all files. Put a check mark in the box that asks to perform this for other conflicts.
Once you have all packs unzipped, run InstallTool.cmd
The documentation zip file can be downloaded from http://www.oracle.com/technetwork/middleware/epm/documentation/epm-096302.html
Hope this helps.
Mike
Edited by: user10224619 on Feb 3, 2011 10:12 AM

Details abt Hyperion Planning and Budgeting

Hi Experts,
I want the entire details about Hyperion planning and budgeting for my project. I don't now anything about the Hyperion. I am in SAP BI. Please guide me in this matter...

try this :
http://download.oracle.com/docs/cd/E10530_01/welcome.html
and http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_5.htm for manuals and
http://edelivery.oracle.com/ for full access to software

Using Test Plan and Test Suites as work items

Hi everybody.
I need to incorporate the new feature of TFS 2013 that let me manage Test Plans and Test Suites as work ítems to my current TFS environment. I have TFS 2013 Update 3 (12.0.30324); I guess this feature was released after the release I have.
So, my questions are:
- How can I integrate the work ítem definitions to my process template? I'm using a customized version of CMMI 12.2 and this version didn't have this elements as work ítems.
- How can I adjust the existing data of all my Team Projects in order to use this functionality?
- Is there any impact on the existing Reporting Services reports? or the new process template have incorporated the appropiated changes?
- Do I need to upgrade my TFS Server? If so, a migration process is needed?
Any help will be appreciated.
Best regards.

Hi AjdPC,
Thanks for your post.
Yes, this feature released in TFS 2013 Update 3. But as the TFS 2013 Update 4 has released too, so we suggest you upgrade your TFS to TFS 2013 Update 4.
After you upgraded to TFS 2013 Update 4, if you want use this feature in the old/upgraded team projects, you need configure features for these team project, please refer to the detailed information in this document:
https://msdn.microsoft.com/en-us/library/ff432837.aspx. For example, if one your upgraded team project created using CMMI 12.2, open this team project’s Web Access admin page, click
Configure Features>>select the CMMI 2013.4 in the
Choose a process template to continue textbox, then click Configure button.
For the custom process templates, we suggest you download the new 2013.4 versions process template from your collection after upgraded to TFS 2013 Update 4, then custom that 2013.4 process templates to instead of that old customized 12.2 process templates,
then upload the new customized process templates to your collection and create team project use them if you want.
That not impact your Reporting Services reports.
As I said, we suggest you upgrade to TFS 2013 Update 4, In-place upgrade or migrate upgrade both are ok.
Note: make the full backup for your TFS Server databases before any upgrade or migrate operation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is the basic difference between Hyperion Planning and HFM

Hi GURU'S,
what is the basic difference between Hyperion Planning and HFM and when do we choose them.

On a high level the difference is this:
1. HFM is best for global collection (collecting data from scattered entities), group consolidation and for easily structuring financial reporting (mainly consisting of financial data)
2. Planning is best for modeling your business, starting from a demand forecast and arriving to capacity planning and finally to financial statements, by utilizing business drivers (non-financial data like volumes, prices, productivity rates etc)
Of course, differences may be analyzed at several levels down to technical, but the discussion may turn out to be too long, yet adding little value to the question: "when do we choose the one over the other". Bear in mind that your requirements may turn out that you need both.

What is major difference between hyperion planning and hyperion essbase

hi
what is the differences between hyperion planning and hyperion essbase.i dont know about planning much.but as far i know.i think we can do every thing in essbase also(planning,budgeting and forecasting)
what u say.what we actually do in planning.
regards
bharat

Hi Bharat
Although as you mention in your post Essbase can do plans/budgets etc it may not be simple to provide complex planning process control and ease of data entry etc.
Planning delivers these benefits and some through web delivered components such as forms, business rules and workflow for instance. There are some restrictions to using planning and these need tobe well understood before embarking on a project.
It would be worth having a look at product sheets from Oracle and/or presentations from various events to get a feel for planning capabilities.
Hope this helps.
Andy King
http://www.analitica.co.uk

JD Edwards E1 9.0 and Hyperion Planning 11.1.2.2 Integration

Hi All,
As we all know with the release 11.1.2.2 ERPi adaptor support JDEdwards integration as wel.
In our current project we have the requirement to integrate these two system.We have the experience of integrating Ebusiness suite and Hyperion but completely new to JDEdwars.
Incase some one has worked on this, please help us with your inputs and suggestions.
Regards
Anand Gobbur

The setup in ERPi will be the same as the other source system types, (EBS, Peoplesoft). I would recommend following the ERPi administrator guide and the KM's that are available for configuration of ERPi.

Hyperion Planning and Smartview : Build function HS Description

Dear all,
I am currently using Hyperion planning 11.1.2.2, I would like to display in excel adhoc reports the description of some dimension members via smartview.
To this end I used the "build function" functionality:
I selected an empty cell and call the functionality, a window appears with two parameters :
1-connection : this field is automatically filed (WSFN|HP|pc|Planning|Plan1)
2-Member List : I would like to fil it manually ex : "Account#100"
I click on validate : the following message appears : Selected connection does not support this function.select new connection.
I would like to know what is meant by connection? what is the syntax of the connection string? could you please provide an example?
Thank you
Best regards.
Toufik
Edited by: user11081975 on May 12, 2013 12:55 PM

Hsdescription is not supported by Planning connection.
You can use that with Essbase connection.
Read http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user/ch17s01s08s15.html
It talks about what are shared and private connections.
Regards
Celvin
http://www.orahyplabs.com

Hyperion Planning and Smartview Free form

Hi All,
I am currently using Hyperion planning 11.1.2.2, after a successful application creation, data load via EAS, Reports/Forms are working perfectly in smartview.
Now I would like to go beyond Adhoc Analysis, I would like to know if it is possible to use Free Forms with Planning?
when I try to create a free form with this connection profile" http://server:19000/HyperionPlanning/SmartView" it doesn't work. I cannot add label columns outside the borders of the form/Reports (blue cells).
I checked on the web and it seems that free form is only possible with essbase aps ?
please help.
Regards.

Hi Toufik,
Are the lines you want to add just labels for your own use? You should be able to open a form in Ad-Hoc analysis, then add a new row (using standard excel functionality) and add a label in this line. You can still change dimension members using the drill functionality and by over-typing Dimension member cells and refresh the sheet with your label in place.
I've just tested this on 11.1.2.2 as I was doubting myself and it definitley works connecting to Planning. Is the above what you're trying to achieve?
Regards
Ed

Hyperion Planning and Varying attribute

Hi
Can some help me in having varying attribute in Hyperion Planning application.
Does Hyperion planning support Varying attribute concept?
Regards
Shyamkant

HI,
Varying attributes is applicable only to essbase so far , this is also with the advent of the new versions.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

BusinessObjects VS Hyperion (Planning and Budgetting)

Hi,
I need some documents which would help me compare these two products.
Also if you know some links where I could learn more about the "Planning and Budgeting Module"
Regards,
Chinmay Herwadkar

Hi,
you can try the following:
Go to [http://service.sap.com/bosap-support] and navigate to Documention->Product Guides . Select SAP BPC and you should get the links to the related documentation.
If you still get problems to access it, you must issue a message to SAP (service.sap.com/support) asking them to allow you accessing the documentation on SAP BPC.
Regards,
Stratos

Rman and ebusiness suit 11i or R12

hi
will RMAN work if i have e-business suit??
some of my senior is saying it can not be used if you have ebusiness suit.
Regards

you wrote:
hi
will RMAN work if i have e-business suit??
some of my senior is saying it can not be used if you have ebusiness suit.
Regardshttp://tinyurl.com/26ytb9e

Hyperion Planning and Intel Xeon

Dear All,
I am currently installing the following Hyperion products:
Essbase, Planning, Scorecard, Reporting and Analysis.
Server specs:
Intel Xeon Processor E5540 (4 cores)
22GB RAM
My concern is the Xeon, is it supported by Hyperion products or not?
Your answer is very appreciated.
BR,
ioGGo.

Hi,
Thank you so much for your answer. So far after installing Oracle DB, Essbase, Planning, Reporting and Analysis, Scorecard, and ODI on a single machine 16 GB Ram Xeon 4 cores and Windows Server 2003 32-bits, it seems like everything is working fine except Business Rules.
BR,
ioGGo.

Hyperion Planning and eBusiness Suite ODI integration

Similar Messages

Maybe you are looking for