Hyperion : Rebind.. How and when does it occur?

Hi,
I am fairly new to Hyperion and have been trying to understand the Hyperion logs for Planning.
I see several Rebinds, for example +"[timestamp]: Rebind at: timestamp"+ .
Kindly help me in understanding what it is? and how it occurs?
Thanks,
Sasi

I wouldn't worry about the message, it is just trying to make a connection with the RMI service.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments

How and when does contacts update on my synced iPhone?

If I add new/update a contact in Contacts on my macbook air when does Phone/Contacts update on my synced iPhone 4S? I use iCloud and only one Apple ID.

iCloud changes taking over 2 hours is definitely not standard. Even two minutes would be a very long time. By "immediately", I mean less than two seconds!
I cannot imagine why your changes would take so long to sync.
One thing to try might be this:
Make the changes on your MacBook Air. Use Safari on the MacBook Air to sign in to http://www.icloud.com and see if you notice the changes immediately (less than two seconds later). Perhaps that might help localize the problem.

HR triggers in GRC CUP.. How and when does this work

Dear Experts,
I would really appreciate if some one could shed some light on how HR triggers work in GRC CUP ?
When does this get triggered ?
Is it when the the user master record is saved or when the Info type 105 is linked ? Are there any pre-requisities that should be taken care from the Hr perspective so that I can set the expectations accordignly with HR team ?
P.S I already went through the article " How to configure HR triggers with GRC CUP ?
Thanks
Kumar

I configured HR trigger rule for infotype 0000 & subtype Z1,field MASSN with value equal to 01 to trigger new hire...i don't see any data being populated into table /VIRSA/INT_TRIG & ?VIRSA/DATA.
I could see the rule in table /VIRSA/RULEATTR.
Any help would be appreciated.
Thanks,
Srinu

How and when does a dimension table gets generated

Hi Gurus,
                 I am new into BI and I will be put into a project within 2 months. I have learned that dimension table contains the sid's of all the charateristics in the dimension table. My conclusions are like
1. Dimension table contains the dim id as the primary key.
2. Dimension table contains sid's of the characteristics.
3. Though sid's in the dimension table are primary keys in thier 'S' table they are not key in the dimension table.
My question is
1. Is there any chance to generate new dim id's for the same combination of sid's because sid's are not part of the key?
2. I got confused when and how does the dimension table gets generated ?
I have searched in the forum and google but still my doubts didnt get clarified. If anyone could throw some light on this topic I would really appreciate it.

HI,
All your conclusions are correct.
Now for your questions the answers are in line:
1. Is there any chance to generate new dim id's for the same combination of sid's because sid's are not part of the key?
    No new dim id's will be generated, dim Id is unique for the same combination of sid's .
2. I got confused when and how does the dimension table gets generated ?
    They get generated when you activate the info provider.
Hope this helps.
thanks,
Rahul

How and when does Berkeley free the memory of key and data ?

Hi,
even though i just have posted a question several days ago, i couldnt find an answere to these questions in the Berkeley docs or on the internet:
Does Berkleley Db free the data that is handeled to it with the key or the data objekt ?
When is it free?
How is the data managed that is in the secondary databases which points directly to the primary database and do i have to copy it?
It would be great to have some answeres, because its hard to write something with low memory use, when you dont know how the memory is treated.

Hi,
Does Berkleley Db free the data that is handeled to it with the key or the data objekt ?Records in the berkeley db is stored as 'Key' & 'Data' pair. The data is accessed into / from the db using the 'Key'. The data in the db is freed when it is deleted.
When is it free?The data in the db is freed after 'delete' followed by 'checkpoint' operation.
How is the data managed that is in the secondary databases which points directly to the primary database and do i have to copy it?The secondary database is just another regular database whose 'Key' is what you choose it to be and the 'Data' is the key in the primary database. The primary and secondary databases are connected using the DB->associate() call. More info with example on this is available here : [http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am/second.html]
Debsubhra Roy

How and when does oracle changes the object status on a view?

I have HR schema and AWARD schema. AWARD schema has views referencing the base tables in HR. Whenever I refresh HR the dependant views on AWARD becomes invalid. I recompile those views after the refresh.
Could anyone explain the internals of this object status change process? How does my AWARD schema sense the invalid status? Why it is not re-establishing the status after the data import?

I refresh HR test instance from production. If you are not so sure about this process...here is what happens ....export production HR schema, drop all the objects from HR test and import the production data into HR test.
I am not worried about what is happening but would like to understand the internal process (beyond the basics).

How and when does table SWIWIOBJCT being updated / populated with workitem

Hi Experts,
I am currently debugging an issue wherein a Invoice Workflow is being displayed in the Purchase Order Workflow Overview. I debugged this and found out that this is because there are entries being selected from table SWIWIOBJCT and this will be also displayed in the workflow overview.
So what I am trying to look into is how does this table being populated. Like, what are the criteria and requirements that this table will be updated / populated.
Any help is highly appreciated.
Thanks so much in advance,
Larissa
Edited by: Larissa Taguiamon on Apr 14, 2010 7:48 PM

Abdullah
The EKBE table will have items related to PO history - so if you go to a PO line item and look at the PO history you will see an invoice but you will NOT see a payment. Payments are not directly related to a PO and therefore no payment information would appear in your PO history and therefore it wouldn't be on the EKBE table either
Sandra

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

Composite mode (control click or right click) and how and when to use

Hello,
I would like to learn how and when to utilize the composite mode (control click or right click on your timeline)and all of its functions. Do you have a recommendation as to who might be able to explain what each of the composite mode functions do? Editors keep referring to how great this feature in FCP is.
Thanks,
Jordan

Have a read through the manual first. It explains what Composite Mode does and the theoretical underpinnings. Book III- Chapter 18- Page 361 (in FCP 5.1) is a good place to start.
If you have questions, come back.
Have fun.
x

How and when to create a fact table

hi every1,
I am new to oracle and specially to Data Warehousing. I am using OWB 11g on windows XP.
I have created the dimensional for a database, now i am in the implementation phase.
i have the following questions.
1. I don't know how and when to create a fact table. I have already created the dimensions (ROLAP).
2. Do i need to create a mapping for a Cube. if yes, then how to load them from 4 different dimensions. how will be the join condition, they don't match?
3. I will also try for aggregation, do i need to use MOLAP for the dimensions or ROLAP works?
Please, give a quick reply.
regards
RF

You should ask your question here:
Warehouse Builder
where it is on topic.

How and when do applications get stored on iCloud? I play a game called injustice and it saves to iCloud but seems to do it randomly. I often lose the most recent game and it backs up to an old one. Can i do it manually? is there a way to check?

when do games get saved? Can i do it manually? I often lose most recent game if i restore it from iCloud

You'd need to ask the developer. How and when individual apps use iCloud is up to the developer of that particular app,

Usage of G/L interim Account - How and When to offset it ?

Hello,
To use this account, we have to specify that the payment method is connected to this type of account.
After, we have to assign the G/L Interim account to the bank master data.
This method is only available with payment transfer.
But if the posting following the bank transfer is duly put onto this transitory account, how and when can you offset it against a genuine Bank Account?
Thanks
Stéphane

Stéphane,
The Checking Account clearning (Interim account) is mainly used when there is a step after the Incoming payment and before the money is actually realized in the Bank. This is mainly true in case of Checks, Credit Card and Cash Deposits.
The Deposit function which is performed for the above mentioned 3 types of transaction actually offsets the Interim Account.
The JE for the Deposit function typically is
Bank Account Debit
Interim Account Credit
Let me know if you have further questions
Suda

How and When Sub-Ledger Data is populated into XLA_DISTRIBUTION_LINKS Table

Hello Gurus
I have been working on a Sub-Ledger Accounting and I could get a fair idea of how data is being transferred from XLA_DISTRIBUTION_LINKS to XLA_AE_LINES and XLA_AE_HEADERS. As per my understanding, During "Create Accounting" process, data from XLA_DISTRIBUTION_LINKS will be summed up based on JOUNRAL_LINE_TYPES rules and conditions to load into XLA_AE_LINES and XLA_AE_HEADERS. Then during "Transfer to GL" process, data from XLA_AE_LINES and XLA_AE_HEADERS is transferred to GL Tables. What I didn't understand is how and When data gets loaded into XLA_DISTRIBUTION_LINKS. What are the rules and conditions and during which step data will be loaded to XLA_DISTRIBUTION_LINKS table? Can somebody please explain me how data is transferred from Sub-Ledger Distribution Tables to SLA Distribution Table?
Thanks,
Sunny.

Above Notes are good.
But I just wanted to add a staight point.
xla_distribution_links and xla_ae_lines will get populated at the same time.
Both goes on JLTs and their conditions. One is detailed and the other is summarized / merged.
xla_ae_lines will have extra balancing lines and xla_distirbution_links will have extra gain / loss lines, which end up with zero amount.
Also check the links for the setup of distribution identifiers.
http://docs.oracle.com/cd/E18727_01/doc.121/e13420/T193592sdextchap.htm#sdextacattg
http://docs.oracle.com/cd/E18727_01/doc.121/e13420/T193592sdextchap.htm#sdextdisidg
By
Vamsi

How and when the database release a row lock?

Dear experts,
We are using the following statement to obtain a row lock in a table in the database(ORACLE of course),
SELECT * FROM {TABLE_NAME} WHERE ID = 1 for update
and if we succeed grabbing the row lock we will continue to issue a update statement every 30 seconds to preserve the lock as far as possible.
here is the update statement to preserve the lock,
UPDATE {TABLE_NAME} SET time = ? WHERE ID = 1.
As you see more longer we keep holding the row lock , more update statements are submitted in the pending transaction.
In normal case our application can grab the exclusive row lock and works for a long time,however sometimes a connection reset exception is thrown
and our application will close the connection(I assume the pending transaction will be rolled back by the database) and exit the JVM.
Since other applications will keep trying to grab the same row lock to become the master role,
we expect one of them can succeed but they are all failed because the database has not released the row lock as expected.
Can someone explain more details about how and when the row lock can get released in our use case?
Thanks,
SuoNayi
Edited by: SuoNayi on 2013-5-30 上午8:12

Hm. Is this part of an XA transaction by any chance? I know that Oracle maintains separate bookkeeping for such transactions which can cause rows to stay 'locked' even when the regular DBA views will indicate there is no user currently locking the record at all. I have no idea about the actual details and what you need to do to clean up such a situation, that is something a DBA should know and do.
If not... well this is more of a question for people who know the DBMS, which makes it a target for the Oracle DBMS forums. Java developers don't tend to have DBA-level knowledge of the database, you should ask the question where you have more chance of people with expertise answering stuff:
General Database Discussions

Hyperion : Rebind.. How and when does it occur?

Similar Messages

Maybe you are looking for