Hyperion Shared Services Installation Problem (URGENT)

Hi,
I have installed the Hyperion Shared serives 9.3.1 with Oracle Application server and configured with the same but in
services.msc i am able to see only HyperionS9OpenLDAp. i did the all post task and did manual configuration for
Oracle Application Server like
1 Created new OC4J instance for Shared services
2 Added the below lines respective config/global-webapplication.xml file
<init-param>
<param-name>req_time_introspection</param-name>
<param-value>true</param-value>
</init-param>
3 set the heap size
Maximum heap size 512M
Initial heap size 256M
4 Added the Java Options below
-Dhyperion.home=<HYPERION_HOME>
-XX:PermSize=64m
-XX:MaxPermSize=128m
5 Deploying interop.war
6 Added the below lines to Jave calss path
<HYPERION_HOME>\deployments\generic\SharedServices9\config;
<HYPERION_HOME>\deployments\generic\SharedServices9\config\lib
\HubProductBean.jar;
<HYPERION_HOME>\common\JDBC\DataDirect\3.6\lib\hyjdbc.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-collections-3.2.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-dbcp-1.2.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-logging-1.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-pool-1.3.jar;
<HYPERION_HOME>\common\loggers\Log4j\1.2.14\lib\log4j-1.2.14.jar;
<HYPERION_HOME>\common\XML\JAXP\1.2.2\xercesImpl.jar
<HYPERION_HOME>\common\SAP\lib;
But i able to get only one service.
Please help on this
Regads
KumarK

hi,
I have the same supported Version of ORACLE APPLICATION SERVER 10g 10.1.3.1 and for the not able to see the Hyperion Shared Services service in Services.msc as while installing Shared Services there no Option like Deploy as Windows services so not able to see there i think.Please correct me if wrong.
Here i have one doubt while Configuring Shared Services with Oracle Application Server we are not specified the port number for Shared Services. So is it takes the same PORT number and URL is
http://<servername>:58080/interop/
Please clarify me.
Regards
KUMARK

Similar Messages

Hyperion Shared Services inatllation problem

Hi,
I have installed the Hyperion Shared serives 9.3.1 with Oracle Application server and configuration but in services.msc i am able to see only HyperionS9OpenLDAp. i did the all post task and did manual configuration for Oracle Application Server like
1 Created new OC4J instance for Shared services
2 Added the below lines respective config/global-webapplication.xml file
<init-param>
<param-name>req_time_introspection</param-name>
<param-value>true</param-value>
</init-param>
3 set the heap size
Maximum heap size 512M
Initial heap size 256M
4 Added the Java Options below
-Dhyperion.home=<HYPERION_HOME>
-XX:PermSize=64m
-XX:MaxPermSize=128m
5 Deploying interop.war
6 Added the below lines to Jave calss path
<HYPERION_HOME>\deployments\generic\SharedServices9\config;
<HYPERION_HOME>\deployments\generic\SharedServices9\config\lib
\HubProductBean.jar;
<HYPERION_HOME>\common\JDBC\DataDirect\3.6\lib\hyjdbc.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-collections-3.2.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-dbcp-1.2.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-logging-1.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-pool-1.3.jar;
<HYPERION_HOME>\common\loggers\Log4j\1.2.14\lib\log4j-1.2.14.jar;
<HYPERION_HOME>\common\XML\JAXP\1.2.2\xercesImpl.jar
<HYPERION_HOME>\common\SAP\lib;
But i able to get only one service.
Please help on this
Regads
KumarK

hi,
I have the same supported Version of ORACLE APPLICATION SERVER 10g 10.1.3.1 and for the not able to see the Hyperion Shared Services service in Services.msc as while installing Shared Services there no Option like Deploy as Windows services so not able to see there i think.Please correct me if wrong.
Here i have one doubt while Configuring Shared Services with Oracle Application Server we are not specified the port number for Shared Services. So is it takes the same PORT number and URL is
http://<servername>:58080/interop/
Please clarify me.
Regards
KUMARK

Shared services installation problem

Hi,
i have installed and configured shared services, configuration was also successfull, when i am trying to luanch through user management or internet explorer, it is getting page is not displayed.
when we install shared services java runtime environment should get install. which is not there in internet explorer advanced settings and add& remove programs.
when i try to stop the shared services in services list it is giveing error message 1033 and server is not responding.
webserver = iis 6.0
application server =apache
i am trying since very long for this installation.
pls can any one could suggest what more i should do for above installation
adavance thanks
kanth

thank u,
i am trying to install 9.3.1 version
in services when i am trying to stop ldap and shared services it is not getting stopped
error message is it is not getting respond to the action
error is 1033
i am using computer name as server name
one more thing is when we run hyperion we need to do some setting in internet explore for security and advanced option.
in advanced options setting a java icon will get created which is not getting in internet explorer advanced option
first time when i installed it was running perfectly i formatted and trying to re install
thanks
kanth

Hyperion shared services installation Help.

Hi
I just started hyperion installation on my NOTE BOOK PC.
OS : 2003 server.
Databse : SQL SErver 2005 with service pack 1
Oracle 10g
I downloaded All hyperion SW from oracle.com.
I am able install shared services but not able to configure any thing. I tried with giving my NT user name & PWD & sQl server user name & pwd, oracle username & pwd. but none it's accepting. Kindly pls tell me how to configure & also tell me is there any easy document for config. I have all installation docs from oracle.

Hi Udaya,
To enable TCP/IP,
go tp
Start -> Programs -> MS SQL 2005 -> SQL server configuration manager .
In configuration manager ,if you go to network protocols, you ll see TCP/IP
Right click ,and go to its properties ,here you can change the status of it
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Hyperion Shared services configuration problem. 11.1.2.2

Installed 11.1.2.2 HSS and EAS on middle tier linux server and using a 2 brand new SQL Server 2008 database(s) as the repository on Windows 2003 machine. These servers were used in 11.1.2.0 environment so should not have any tcp errors but configtool is throwing the "EPMCFG-10368 cannot connect to database error". Configtool.log only has the "INFO:Start Configuration" message in it. I can ping/telnet from Linux server to SQL Server using 1433 port. As i mentioned, the 11.1.2.0 version was used with these 2 servers and this version was un-installed completely from the Linux server and we are using a brand new SQL database that is setup with a new ID that looks to have all the proper security credentials per the start up instuctions. I do notice that the OraInventory folder and some files still remain from the 11.1.2.0 version in the home directory of the Linux server so maybe that is an issue? Any thoughts on why configtool not finding my new SQL database? Oracle ticket is open but we still in the TCP, Pipe checking phase with them...

I assume you've already ran -
Alter database <yourdbname> set read_committed_snapshot on
Alter database <yourdbname> set allow_snapshot_isolation on
and -
Launched SQL Server Configuration Manager, Under SQL Server Network configuration selected "Protocols for <InstanceName>" ensured that the "TCP/IP" protocol is enabled and "Named pipes" is also enabled.
If not, these changes need to be made and the DB services restarted.

Hyperion Shared Service issue ( Urgent)

Please help anyone who knows this issue..
Hyperion Shared Service is not getting up.When I tried to do manual start of service on the server it stops after some time..I tried to connect to database and I was able to connect.
Please let me know what else I need to do to resolve this issue.
Version is 9.3.1
Thanks in advance
Vishal

John,
I start Shared Service from the start menu ->Administrative Tool -> services.
I checked Event log file and found below message after the service stops.
*"The description for Event ID ( 0 ) in Source ( HyS9SharedServices ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service stopped".*
Regards
Vishal

Hyperion Shared Service Upgrade

I am upgrading shared services from 9.2.0 to 9.2.1 . HSS (Hyperion SHared Services) is deployed on oracle application
server 9.0.4.Now following the upgrade instructions in the installation document of HSS I did the install and then
ran the configuration utility.But when i am going to the web page http://localhost:58080/interop it is still showing me
the older 9.2.0 version.
Does this mean i have to redeploy the interop.war file on the application server .
What would be the steps in that case.??
I tried by undeploying the existing version and deploying the new interop.war but the server starts giving some
strange errors and the process does not work .Any pointers and steps will be of immense help
Thanks

user507705 wrote:
Windows XP Professional version 2002, Service Pack 3.Well this may be the reason why you are getting problems, XP is not officially support as an OS for hosting Planning.
If you are new to installing hyperion products I always recommend starting out on a supported OS.
Cheers
John
http://john-goodwin.blogspot.com/

Troble configuring Hyperion Shared Services with SQL Server 2005

I recently installed SQL server (SQL SERVER 2005) in my machine and then am trying to install Hyperion (9.3.1) products. I started with Shared services. It was installed successfully. Problem is occuring when am trying to configure Shared service with SQL database using Hyperion Configuration utility (9.3.1)
The error which is popping up is
Unable to connect to the database for the product Hyperion Shared Services.
Things which I tried from my end
1. Made sure TCP IP Protocol was enabled in SQL server configuration server.
2. hypuser was created in SQl server.
3. hypdb was created in SQL server.
4. Was having dynamic IP address so install Loopback adapter to obtain Static IP address and port.
5. Port and IP address was correct.
Let me know where I am going wrong.
Any help will be greatly appreciated.

Finally got it fixed firewall settings needed to be change : This document helped me a lot to troubleshoot the issue
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
This problem may occur when SQL Server 2005 is not configured to accept incoming local and remote connections, which is disabled by default in SQL Server 2005 Express Edition, SQL Server 2005 Developer Edition and also SQL Server 2005 Enterprise Edition. To solve the connection forbidden problem, SQL Server 2005 needs to configure to allow incoming local and remote connections.
Firstly, ensure that SQL Server 2005 is configured properly to allow incoming connections on the instance of database server, else enable and turn on the local and remote connections setting.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine tree, click Remote Connections.
Select Local and remote connections, or Local connections only which applicable only if there is no remote system tries to connect to the SQL Server, useful when you just trying to connect and authenticate with the server after installing.
Select the appropriate protocol to enable to local and/or remote connections environment. To ensure maximum compatibility, select Using both TCP/IP and named pipes.
Click Apply button when done.
Click OK button when prompted with the message saying that “Changes to Connection Settings will not take effect until you restart the Database Engine service.”
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine, then click Service.
Click Stop button to stop the SQL Server service.
Wait until the MSSQLSERVER service stops, and then click Start button to restart the MSSQLSERVER service.
Secondly, SQL Server Browser service has to be enabled to allow for local and remote connections if SQL Server 2005 is running by using an instance name and users are not using a specific TCP/IP port number in the connection string.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, click SQL Server Browser.
Select Automatic as the Startup type to start SQL Server Browser service automatically every time system starts.
Click Apply button.
Click on Start button to start the service immediately.
Click OK button.
Finally, if remote computer needs to connect and access SQL Server, an exceptions in Windows Firewall included in Windows XP SP2 (Service Pack 2), Windows Server 2003 and Windows Vista needs to be created. If you’re using third-party firewall system, the exception rules also needed to be created to allow external remote connections to the SQL Server 2005 and SQL Server Browser Service to communicate through the firewall, else connections will be blocked. Consult the firewall manual for more details. Each instance of SQL Server 2005 must have its own exception, together with an exclusion for SQL Server Browser service.
SQL Server 2005 uses an instance ID as part of the path when you install its program files. To create an exception for each instance of SQL Server, you must identify the correct instance ID. To obtain an instance ID, follow these steps:
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Configuration Manager.
In “SQL Server Configuration Manager”, click the SQL Server Browser service in the right pane, right-click the instance name in the main window, and then click Properties.
On the “SQL Server Browser Properties” page, click the Advanced tab, locate the instance ID in the property list.
Click OK button.
Then create an exception for SQL Server 2005 in Windows Firewall.
Click on Start button, the click on Run and type firewall.cpl, and then click OK. For Windows Vista, type firewall.cpl in Start Search box and press Enter key, then click on Allow a program through Windows Firewall link on left tasks pane.
In “Windows Firewall”, click the Exceptions tab, and then click Add Program.
In the “Add a Program” window, click Browse button.
Click the C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe executable program, click Open button. MSSQL.1 with is a placeholder for the instance ID that is obtained from previous procedure. Note that the path may be different depending on where SQL Server 2005 is installed.
Click OK button.
Repeat steps 1 through 5 for each instance of SQL Server 2005 that needs an exception.
For SQL Server Browser service, locate the C:\Program Files\Microsoft SQL Server\90\Shared\sqlbrowser.exe executable program, and click Open button.
Click OK button.

Shared services installation.

through configuration utility - i am unable to configure shared services (configure database and deploy to App Server) .
Given username & Password ( hypuser and password ) for SID (hypuser)
on Database configuration details popup.
got the below error,
"unable to connect to the database for the product Hyperion Shared services"
My Question is ,
Do i need to create SID on oracle(database) , if so how can i create?
Do i have to create users hypuser on oracel.
Note: SID- "hypuser" and username "hypuser" are read only.

kindly provide the details like version,o/s,database and what error you are facing.
Main Idea behind successful installation is Prerequisite, if you go through it properly and follow according to Installation guide
anyway give the details.
Thanks
Dhanjit G.

Hyperion Shared Services Database error

Hi there!
I am trying to install hyperion financial management and for this i already installed the following on windows 2003 server:
1. Installed Oracle application server
2. Oracle Database
3. IIS Web Server
4. Installed Hyperion shared services
5. Configured shared services without errors
After that i launched shared services page by http://orixacc:7777/shared
i got the page with the following errors
SEVERE ERROR: The Hyperion Shared Services database is not configured correctly. Please contact your system administrator
If anybody can help me to solve this problem, i will be thankful.
During confguration there was no error at all.

OS - 2003 R2 Server
Database - MS SQL Server 2000
Hyperion -9.2.1 version
Its a PROD server
All the HFM applications are running properly.The problem is with the Shared Services only, even by giving the url i am getting the above error.previously its working fine.i am not getting any clue on this.even there is no trace on logs.

Hyperion Shared Services 9.3 does not display UserDirectories

Hello!
We are working with Hyperion Shared Services 9.3.
Since today, when I "Expand" UserDirectories folder (or another in the same left menu), it doesnt finish load (appears another folder that says: "Loading..." but never finish).
Can anyone tell me what may be causing it? This "Shared Services Server" is in a Client in another country, so, we don´t know if any changes that they could do cause that fail.
I check SharedServices9 logs and only find that as "unusual" thing:
2012-03-26 14:23:32,081 [http-58080-Processor7] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2012-03-26 14:23:32,081 [http-58080-Processor7] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2012-03-26 14:41:45,021 [http-58080-Processor5] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - El sistema ya se ha configurado; se omitirá el intento de configurar el sistema de nuevo con el nuevo archivo de configuración /E:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
But, I read in some posts, that this CSS.xml file could be in read only, or currupted, but I check both CSSs (I read in a JhonGoodwin post that there are 2 CSS.xml files to check, and I check both).
Some ideas? I´m all ears... :)
Thanks for your time,
Best Regards,
Fabian.
Edited by: 920308 on 27/03/2012 11:17 AM

Hello Jhon!
At first, thanks for spend time on my issue.
Last, can you tell me what Browser do you recommend for Hyperion 9.3?
I think that it is the problem, because support department has upgraded some patches at server.
I try to downgrade one version from IE8, but I appreciate that you recommend me the "best" browser.
King Regards, and thanks again for spend your valued time.
Fabian Guadalupe.

Creating data server for Hyperion Shared Services (HSS)

Hey Gang,
Has anyone had experience in creating a Data Server for Hyperion Shared Services (HSS) using the java API? I know HSS uses Native Directory, but to be compliant the Hyperion folks recommend using the java API strictly to get access to the users, groups, etc.
Anyone have experience with this, or perhaps at least how to get ODI to kick off a java file to pull the data needed? What effort would be needed in ODI, is it straight forward or would I have to develop a technology or something to integrate into ODI?
Thanks.

Thanks for the quick reply John. I am trying to get user and group information, and also doing some complex manipulation. I need this to verify user access and some other stuff. I will not always have access to HSS and cannot always export the information, thus the need to use the HSS java API.
I'm trying to pull it out of HSS and put it into an Oracle table in a standard format where I'll use the information and do reporting off of it. I've developed a java class that does migrates the data over, but its crude and I'd like to move it into ODI with some of our projects that are currently doing the same thing with other ERP such as Ebiz and Peoplesoft.
If I can recode some of the java in ODI, how would I go about doing that. Where would I include the libraries, etc.? is there a tutorial or a place where I can get started on that.
Thanks for all the help.

Security issue-Hyperion shared services console

Hi,
I want a user to access worspace planning but not EAS.
how to do with hyperion shared services console.
Regards,
DK
Edited by: 972210 on Nov 20, 2012 5:19 AM

Yes, the user has the Provisioning role and can edit and save user roles, but they cannot update native groups that users are assigned too.

Hyperion Shared Services 11.1.2.x integration

Hi,
I'm trying to locate the docs about integrating OBIEE 11.1.1.5 with Hyperion Shared Services 1.1.2.x. I remember seeing this but can't recall where it is exactly. Can someone point me to the right direction? Thanks.
Regards,
Gerd

Gerd,
Refer my thread here..OBIEE 11g with Oracle EPM 11.1.2.1

Hyperion shared services !

Hi Techies,
I am working on hyperion shared services 9.3.1 version.
Can you any one tell me how to assign the database calculation & filter access in shared services.
What i have did is,
I have created the 3 users in essbase & migrated those users into shared service mode & also register all applications to shared services as well.
All applications are reflecting under analytic servers also.
I have given the Here is some of the roles specific to Essbase in Shared Services.
Server Roles (Administrator, Create/Delete App, Server Access)
Application Roles (App Manager, DB Manager, Start/Stop Application, Calc, Write, Filter and Read Roles.
Poblem is i am not able to assign the database calculation & filter access in shared services.
Please,please could any one guide me ...
Thanks in Advance.

What Sean said.
It is super non-intuitive. I mostly work in Planning (which handles all of this behind the scenes) and when I, alas, infrequently get to use real, honest-to-goodness Essbase I have to relearn this. It never seems natural.
You'd think after relearning it three or four times, I'd get it, but nope, it's just "weird".
Regards,
Cameron Lackpour

Hyperion Shared Services Installation Problem (URGENT)

Similar Messages

Maybe you are looking for