Hyperion System 9.3.1 Services are getting hang... on AIX box.
Dear All,
We have installed & configured Hyperion System 9.3.1 on IBM AIX 5.3 ML-6, 6 dual core CPU & 24GB RAM. Repository database is Oracle 10gR2.
We have scheduled approx 300 Interactive Reporting Jobs in Workspace which has been associated with external trigger events. Once these jobs get executed their output has been imported in the various folders on Workspace.
We are getting following errors in <HYPERION_HOME>/log/BIPLUS/ server_messages_IRJobService.log file when these jobs get executed:
<message><![CDATA[Out of Memory. Advice: Close other applications or windows and try again.]]></message>
And
In <HYPERION_HOME>/BIPLUS/logs/ 0_bijobs_stderr.txt getting bellow error:
*** PROCESS OUT OF MEMORY, EXITING ***
*** PROCESS OUT OF MEMORY, EXITING ***
SIGNAL SIGABRT Generated at Wed May 21 16:19:29 2008
by thread 1287
+++PARALLEL TOOLS CONSORTIUM LIGHTWEIGHT COREFILE FORMAT version 1.0
+++LCB 1.0 Wed May 21 16:19:29 2008 Generated by IBM AIX 5.3
+++ID Node 0 Process 25490 Thread 7
***FAULT "SIGABRT - Abort"
+++STACK
abort : 0x000000e8
# At location 0xd015f47c but procedure information unavailable.
write_string__16IT_CDR_OutStreamFPCc : 0x000001c0
marshal_request__29IT_GIOP_ClientInterceptorImplFR16IT_CDR_OutStreamPQ2_10IT_Binding13ClientRequestUlT3sPQ2_6IT_IOR16ObjectKeyProfile21IT_GIOP_ResponseFlags : 0
After this Hyperion Services are getting hang. In Workspace - View Job Status – showing that Jobs are executing.
Any help would be highly appreciated.
Regards,
Manmohan Sharma
The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.
Similar Messages
-
Services are getting closed.
Hi all,
I do have SUN 420R with Solaris 9 with Oracle database and webbase application running.
The services are to be started and stopped by the appliation shelll scripts.
And when i tried to start them they are working fine. but they all runnig untill i close the window in
which i have started. Soon after closing the window the services are getting closed .
I tried several time but i could not .
Somebody advised me to type "exit" and then close the window .
but no use, still the problem stays like that only.
CAN ANYBODY HELP ME IN this matter.............................??????????????????????
Thanks in advance.nohup the shell script that you use to start the processes.
man nohup
will show you what you can do. -
Field values directly binded to backend service are getting cleared.
Hi,
In HCM Forms & Process, for ex: in a form the header field values are directly binded to SAP_PA backend service and rest of the fields (dropdown list and free text fields) are getting from custom generic service. Now there is also a pushbutton in my form is used to calculate percentage of a field. Now when the form is displayed by default the header values are getting populated from SAP_PA backend service. When I click the push button with out selecting values(drop down list) getting from generic service all header field values are getting cleared. But if I select any dropdownlist value before selecting pushbutton and then if I click pushbutton all the header fields are retained with values. I am facing this problem for all the forms that I developed. I am looking for valuable answer.
Regards,
Nayani .So you are or are not using a user event? Sounded like you were which was firing when the user selecpiushed the "button" for calculating fields. Whatever "event" you have tied that button too seems to be your culprit. Are you doing this calculation in Javascript off the button "onClick" even or passing it to a HCM P&F "user event" in the backend? If it is to a HCM P&F "user event", that's where I would make sure your fields are selected.
From the sounds of it, it seems when you do NOT select a dropdown list value, your generic service is not handling this gracefully and an error occurs. That would cause ALL other services NOT to run. It's an odd thing the framework does and often very frustrating to hunt down, but whenever any service errors, it will not run others.....hence no fields coming back correctly....even if those other services have NOTHING to do with yours (weird, I know).
Hope this helps. -
Applications are getting hanged up in Safari browsers
Hi,
Ours is an AJAX based application which is working in almost all the browsers and their respective versions. Of late we have been observing that our application is getting hanged up in the Safari browsers, specially in the latest versions of it. The content that we are displaying mainly contains simple HTML attributes along with respective events set for them.
However once the AJAX call is completed and after displaying the page in the browser, none of the user's events is recognized by the browser for eg: the radio buttons' clicks, drop down selections and the corresponding Javascript functionality is not working, which further leading to flow breakage in our application.
Could you please throw some light on when we come across these kind of issues and how best we can resolve them?is any increment in the speed of rendering the page in Safari browsers during the latest versions launch?
Yes. Safari 5 introduced DNS Prefetching: Safari looks up the addresses of links on webpages and can load those pages faster.
In Safari 5 this could sometimes overwhelm the router and stall the page opening.
This was fixed in Safari 5.0.2.
More details here:
http://support.apple.com/kb/TS3408?viewlocale=en_US -
Application are always getting hanged.
Hi,
we are using windows7 professional operating system.It is an desktop pc and particularly using for Kaspersky endpoint security 2013.
whenever we are using this desktop pc applications are getting hanged and not at all responding.Even if we click on any application like Internet explorer,Google chrome, the system is keep on rotating and sometimes it is getting re-starting automatically.
Moreover,we have tried to install Microsoft SQL server and it is keep on installing more than 1 hour.We are particularly using this pc for Kaspersky endpoint security for blocking the usb,cd-roms etc.
Please let me know the how to fix the issue and your support is highly appreciated.
Regards
Pradeep.RHi,
Have you make any change to your system before this problem occures? How about disable Kaspersky temporarilly for test?
On the other hand, please check Event Log if it identify this problem.
If problem persists, you can try to perform a Clean Boot to check whether this problem caused by 3rd program or
service start with system. Refer to the link below for more details.
http://support.microsoft.com/kb/929135
Roger Lu
TechNet Community Support -
SAP Standard Jobs are getting canceled
Hi Basis Gurus,
In our Quality BW 3.5 system the SAP Standard jobs are getting canceled.
The jobs are as follows
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_CPH_HRCOLL
SAP_CCMS_MONI_BATCH_DP
SAP_COLLECTOR_FOR_JOBSTATISTIC
SAP_COLLECTOR_FOR_NONE_R3_STAT
SAP_COLLECTOR_FOR_PERFMONITOR
SAPCONNECT ALL SEND
SAP_REORG_ABAPDUMPS
SAP_REORG_SPOOL
SAP_RSICFDLT
In SM37 when i click on the job log for the above mentioned jobs the system is promting a message saying as "Error reading job log"
Please let me know how can troubleshoot it and resolve this issue.
Our is qulaity BW 3.5 system
Solaris OS
Oracle Database
Please help me.
Regards,
Anil.Hi ,
For log display reason, try the note suggested. Jobs cancel reason may be due to that the user who schedule that job are locked or not exist on that client. Or other reason will be clear only after log display.
Ankit -
Forms gets hang after 15 mins in 11.5.10.2
Hi,
I have cloned an instance from production. Now my forms in production are getting hanged after 15 mins but the development instance is running fine. The EBS version is 11.5.10.2. Linux RedHat 4.0. Jserv 1.1.
Everytime this is happening at 15-20 mins interval. I have seen the log files in iAS_HOME/Apache but they are clean.
Can anyone plz help on this.
Thanks.
Neeraj.Rapid Clone does not modify the source system. adpreclone.pl prepares the source system to be cloned by collecting information about the database and creating generic templates of files containing source specific hardcoded values.
I suggest you use Forms Runtime Diagnostics (FRD) to debug the issue, for more details on how to use it please check Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=150168.1 -
DMP 4305 getting hanged and not reachable
Hi,
We have a DMP 4305 player which is running the version 5.2.1 and MCS 7835-H2 server playing version 5.2.2.
The players are getting hanged after few days and is not reachable. We need to restart the players, but the same thing repeats after few days.
Kindly advise.Hi,
Normally DMP and DMM are supposed to run the same version so the first step here would be to upgrade your DMP to 5.2.2 so that it matches the DMM version.
If you still have the problem afterwards a TAC case would be the way to go to investigate if we are facing a memory leak or a simple hang of the device.
Regards,
Nicolas -
Hi, my system runs on windows 8 on hp laptop envy series. All of a sudden, system event log on service stopped, errors which prevented the system to log on services. It displayed error of STOP 0xC000021A when i use system restore to roll back to previous
configuration. Also when I tried to refresh my pc, it says i can't do changes as log in was switched to prevent the changes by notification.I don't know what to do next, I tried to put recovery dvds which I made when system was bought, now not at all working.
Internet is not active, not able to resolve by trouble shooting and system taking lot of time to get dsktop. Previously I used to get my desktop in 10 seconds. Now its 10 min. May be I m infected with virus. My files, they are there. I tried to transfer some
files by pendrive to another system, now the new system(where i put my files in another system) crashed, windows 7 system which does not display desktop, icons etc and not at all workable.
Also in my hp system, i m unable to open control panel. if its opened, it will not go off, when i use task manager, it says explorer and shuts down. I had to force restart the system. Please resolve something to get my hp laptop workable. I m waiting for
my MS thesis to be working on that. My files are locked and no way to transfer, I fear of infected by virus to another computer also.
Pls give instructions to hw to set my hp laptop at the earliest without losing any of the files. Idon't want to reinstall and lose all the data for timebeing. Else, inform me the option for copying data safely. I tried to change the adv startup and recovery
by changing the boot sequence by DVD but this also shows error 0xC000021A and asks us to see the details. I didn't understand all this. Pls help asap.
Thanks
venkata
STOP 0xC000021AMV
If you can boot either from the win 8 dvd or in safe mode we need the DMP files
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag -
Messages are getting stuck in PI system
Hi All,
we were testing a SOAP to WS scenario in PI 7.1 but unfortunately message are getting stuck in PI system due to below error.
- <sap:ExceptionChain xmlns:sap="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/SystemFault">
- <sap:ChainedException>
<Exception_Name>CX_SOAP_SEQ_EX_TO_QRFC</Exception_Name>
<Exception_Text>wsrm create failed</Exception_Text>
</sap:ChainedException>
- <sap:ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Error in WSRM Soap Application</Exception_Text>
</sap:ChainedException>
- <sap:ChainedException>
<Exception_Name>CX_SOAP_FAILURE_FAULT</Exception_Name>
<Exception_Text>SOAP fault when calling Web service</Exception_Text>
</sap:ChainedException>
- <sap:ChainedException>
<Exception_Name>CX_SOAP_FAULT</Exception_Name>
<Exception_Text>Authorization missing for service , operation "CreateSequence"; more details in the web service error log on provider side (UTC timestamp 20140616182623; Transaction ID 539C7F7350800420E10080000A4911BD)</Exception_Text>
</sap:ChainedException>
</sap:ExceptionChain>
Hope someone have an idea.
Regards,
VinodHi Vinod,
One possibility is the user does not have access to this operation. Please check with any other user (with more access) the same operation.
regards,
Harish -
Oracle Services are not removed from system (10g, on Windows 2003)
Hi,
I haven't used Oracle on Windows Os before and not sure what to do.
Here is what happened
1- I installed 10g on windows 2003 server, created a database with service name OPER
2- I was unhappy with the installation and removed it.
3- then I installed Oracle 10g software again, creating a database again which has name IZROPER
now, there are two of every oracle service in the services.msci
service names containing the first db's (OPER) are still showing up in services, how can I remove them?
ORACLEDBCONSOLEoper
OracleJobSchedulerOper
OracleServiceOper
etc..start -- run -- > regedit
In regedit mode --> HKLM -> SYSTEM -- currentcontrol set --> services --> here Oracle services are avilable , you can delete from here. -
My iphone 4S is constantly on 3g service instead of 4g ...how do i get it to stay on 4g service? My other phone is showing 4g service right next to each other so i know i am in a 4g service area.
THe 4s is 3G device, it can't get 4g service.
-
Service Orders gets saved but text at item level are not saved for all item
Hi All,
We have configured service order scenario. The service order gets saved in GUI and in WebUI. But we are facing issue that not all the text entered at item level are getting saved.
Example if we maintained text for 4 line items and save the SO.
We open the saved SO, we get only 3 line items with proper text
one of the line item text is not getting saved.
The issue happens at both GUI and WebUI.
Any pointers to fix this issue?
Thanks and Regards,
Gauri.Hi,
You can try clearing the buffer using 'CRM_ORDER_INITIALISE' followed by CRM_ORDER_MAINTAIN" or TEXT_SAVE and TEXT_COMMIT, followed by BAPI_TRANSACTION_COMMIT with wait.
Prerna -
Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.ShankarHello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad -
EREC: Multipal IDOC are getting created in receiver system for one IDOC
Hello Experts,
I ran in to one wearied issue in IDOC creation in Receiver system. I am running PFAL in sender system for only Person but 10 IDOC are getting created in receiver system. I don't know why is this happening.
This issue started popping up after we ran RBDAPP01-Inbound Processing of IDocs Ready for Transfer. We ran this to change IDOC to 53 status. Now I don't know what went wrong but Perner distribution is behaving
Appreciate your help.
Regards,
Krishna Bidwai
Losangeles USA.
818 527 0204.Yes, employee is getting created after adding 0003 into the filter, but can u please answer my another question, i.e. PERNR in sender and receiver system should be same.
So in Receiver system (ECC) do i need to maintain external number range for PERNR?
Thanks
Maybe you are looking for
-
Since installation of Snow Leopard 10.6.8 a week ago, I have not been able to print checks on Quicken 2006. Now I find that Word 2004 will not "save as" and freezes. Any help?
-
Hello, Bought a new Nikon camera: Nikon Coolpix P7700. Try to open this NRW (RAW)-files in PSE7 and PSE10. In vain: Got the following message: (Translated from Dutch in English: Cannot open this ...NRW-file because of a wrong file type). I downloaded
-
Daqmx separate multiple physical cahnnels apply equations and collect information
Dear People! I am using a DAQCard 6023E with 16 channels. My purpose is to collect information from a gasifier to find temperature and pressures from 7 of the channels and 4 channels respectively. Forget about the pressure to make the problem more ea
-
I can't find the software button on my iphone4
I try to upgrade my iphone 4, but i don't have the software button in the list 'general'. What can i do or what happen ? Thank you.
-
Just wondering: Is there a way to style the "a" tag or other container elements with CSS to duplicate the inline _blank and open a new window? or is the _blank on every link that opens a new window the best/only way?...I guess a class would add the s