Hyperion workspace log-in issue for only one (in Shared Services) active di
Hi All,
This is Raj, working as Hyp support analyst.
I have big issue in Hyperion production environment. (version No. 9.3.1)
Issue is, we had issues with TWO active directories of Hyperion Shared Servces which ad1 and ad2. We found that the TWO respective active directories (ad1 and ad2) of their hosts are not working.
After that we changed those two active directories hosts with new host names respectively. We have implemented these changes in DEV first and those TWO active directories user able to access Hyperion workspace (HFM users) which are under ad1 active directory. offcourse we have all the servers as well.
But ad2 users are NOT able log-in to the Production workspace but they are able to log-in with DEV workspace.
Not really sure what happened... (Please note that, No access is changed for any of the users)... if it is LDAP issue...how it to resolve...
Can some one please help oout in this...
Thank you very much in advance.
- Thanks,
Raj.
Hi,
Those error messages usually happen when Shared Services has just started up and before the other services have started, it sends out a ping to see if it gets a response from the other application servers, the pings will fail until the other services have started, once they have started them messages should disappear.
I would check that if any changes have happened to your MSAD or the account that shared services uses.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
New window opening for only one standard ESS service
hi everyone,
I am facing a problem with only one standard service Org chart. All other services like who's who , change own data are opening in same portal window. but when i click OrgChart its opening in other window. what could be the problem ? Is it something related backend customization?
Thanks in AdvanceHi ,
Go to tcode SPRO - cross application components - HomePage Framework - Resources - Define Resources -
check window Name property for EMPLOYEE_ORGCHART_SERVICE05, MSS_HCM_SERV_OCI_LAUNCHER,MSS_HCM_SERV_OPROFILE_QUALI_DETAIL,MSS_HCM_SERV_ORGASSIGNMENT,MSS_HCM_SERV_ORG_PROFILES,
window Name property should not contain anything.I am not sure which one is the right resource but do some trial and error.
I suggest not to change the standard resources but create a custom one
Thanks
Bala Duvvuri -
Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.
Hey there k8ei,
Thank you for using Apple Support Communities
I found this article for you to help troubleshoot installing iTunes named Trouble installing iTunes or QuickTime for Windows found here http://support.apple.com/kb/HT1926.
Here is a general overview on where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
All the very best,
Sterling -
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
Changing DB character set for only one schema
We are interested in changing the characterset of only one user from Western European to AL32UTF8.
Could you please verify if the following steps will be correct to do the same.
1. Run CSScan on the one user
2. Fix any issues
3. Export that one user (with NLS_LANG set to <your old database character set>)
4. Create a new database in the AL32UTF8 character set
5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
Database Character Set Scanner provide user scan mode
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size. -
EA2: Code is generated for only one column with Domain check constraint.
I created a Domain with a Value List (Y or N - Yes or No) and used that domain for two columns in the same table. But for only one column (the last one) the check appears in the generated DDL.
After I enabled the "Use Domain Constraints" both checks appear in the DDL, but one as an inline check constraint and one as an "Alter table add contraint.."
Once I changed the naming Template for the check constraint, both constraints are generated as an Alter table clause. The inline check constraint is only generated when the name of the constraint (according to the template) is too long. It would be nice if I could choose if I want an inline or a separate check constraint definition.
Edited by: Roel on Nov 23, 2010 11:55 AM
Edited by: Roel on Nov 23, 2010 12:02 PMI logged ER for that
Philip -
Enterprise Portal Log off Issue for External User
Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise -
Skype not notifying (oange flash) for only one con...
I've been having the issue of skype not giving me an orange flashing taskbar notification for only one of my contacts.
Strangely, this does not always happen. Sometimes this contact's messages will in fact make my taskbar flash. Other times it will not. I can add that both the contact and I have our status on "online", furthermore I have checked the following suggestion I found here on the forums but it did not work as it was already properly set to always notify me:
Highlight the contacts name in the Contacts list so you can see the chat window for this contact. Click on the Conversation menu and select Notification settings. Select there the appropriate option for the notifications.
Any ideas? This has really been going on for at least a few months, perhaps a yearWell, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb -
have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.
thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.
-
Can I show a data label for only one point in a series?
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
ThanksHi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry -
Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
PDF file not generating for only one Invoice billing document
Hi all,
We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
Bug: Not possible to get output in pdf format for only one Invoice type(TR code: VF02) except for all it is generating PDF output.
Can anybody help me out to find the route cause for this problem.
Regards,
Murali.Hi,
For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
So should i need to go through the Printer settings?
Regards,
Murali. -
Program installed for only one user
Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
ThanksSelect the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
sudo chown -R root:admin
Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences. -
ChaRM scenario for only one productive system
Hi CHaRM-experts!
I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
Does ChaRM support such case?
Thank you very much!
regards
ThomHi Don,
thank you very much for your answer.
No, I do not plan any transport in the productive system.
I would just make any adminstrative changes without transport.
Does ChaRM support such scenarios?
Thank you!
regards
Thom -
AA implement aaset value for only one depreciation area
Hi,
Is it possible change acquisition value of asset for only one depreciation area, the area 20 for example?
By point of view of FI I can post the accounts of area 20 by trx OASV,
but in AA how can I do?
If I use the trx AB01 the acquisition value is modified in every area.
Any assistance would be greatly appreciated.You upload the values in AM with the transaction AS91, this don't create postings in FI. It is possible to upload different values by depreciation area.
With the transaction OASV you create manual the total postings in FI. An other option is to use the transaction ABF1 (search on this forum with ABF1 how it is working)
When an area post direct you have to use the transaction OASV (asset account is reconcilation accounts) for the other area you can use a standard FI posting.
When you use AB01 you can create you own transaction type and limet them to one depreciation area or a group (tray to play with Tty 147, there you can fill in amounts by depreciation area.)
Maybe you are looking for
-
I can't remember my security questions what do I do I cant download apps because of it
I don't remember my security questions I can't download any apps because of that what do I do?
-
How to get PPR with ADF BC without FkLink defined? (Jdev 11 with ADF BC)
I have seen the demos where PPR is demonstrated with a master-detail relationship defined. How do you do this if the relationship is not defined. Here is an example based on the HR schema tables: ViewObject1 select distinct city || ' ' | country_id,
-
I have a customer with a datawarehouse solution with a number of star schemas. However in the EIS documentation the recommendation/requirement is to use only one fact table. I want to build an Essbase cube based on two different facts. To merge the t
-
Lightroom 5 installation error messages
When trying to install Lightroom 5 on Mac 10.6.8, the following error messages popped up. ----------- Payload: Adobe Photoshop Lightroom 5 5.4.0.0 Adobe Photoshop Lightroom 5.pkg_5.4 ----------- ERROR: DW006: Apple Package failed to install successfu
-
Is ipages 3.0.3 compatible with 10.9.1
Recently upgraded system to 10.9.1 and only my old version of ipages won't open. Is it not compatible anymore?