Hyperion workspace server down issues

Hi All,
We are currently facing a issue with server frequently going down.
could you please let us know what are the reasons that the hyperion sever goes down.
And also how can i look in to the log file,when the hyperion server goes down.
It would be very thankful ,if you reply to this post ASAP.
Thanks,
sameer.

Thank you for your reply still i didnt get the right solution
We are using Hyperion workspace 9.3.1.0.0.248(Using Interactive Reporting Workspace Client 9.3.1.0.0.248).
Yes,its a specific service.
if the hyperion server goes down we usually do stop and start services by running some shell script, but we still dont what could be the reason ,why the hyperion server goes down.
How could i see the log when the server goes down.

Similar Messages

Hyperion workspace log-in issue for only one (in Shared Services) active di

Hi All,
This is Raj, working as Hyp support analyst.
I have big issue in Hyperion production environment. (version No. 9.3.1)
Issue is, we had issues with TWO active directories of Hyperion Shared Servces which ad1 and ad2. We found that the TWO respective active directories (ad1 and ad2) of their hosts are not working.
After that we changed those two active directories hosts with new host names respectively. We have implemented these changes in DEV first and those TWO active directories user able to access Hyperion workspace (HFM users) which are under ad1 active directory. offcourse we have all the servers as well.
But ad2 users are NOT able log-in to the Production workspace but they are able to log-in with DEV workspace.
Not really sure what happened... (Please note that, No access is changed for any of the users)... if it is LDAP issue...how it to resolve...
Can some one please help oout in this...
Thank you very much in advance.
- Thanks,
Raj.

Hi,
Those error messages usually happen when Shared Services has just started up and before the other services have started, it sends out a ping to see if it gets a response from the other application servers, the pings will fail until the other services have started, once they have started them messages should disappear.
I would check that if any changes have happened to your MSAD or the account that shared services uses.
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion EPMA Server service issue

Hi,
I have an issue with starting up the hyperion EPMA Server service on my local machine. I am using 11.1.2.1 and SQL db. Though I start them in the right order, this particular service is not starting..
Thanks

I hope the op followed my advice which they said they did and went to the link I provided and followed the prerequisites which are under preparing a database, it has the information about the SQL server settings that are required.
"When creating a Microsoft SQL Server database for use as a repository, ensure that you set these options:
Set READ_COMMITTED_SNAPSHOT = ON
Set ALLOW_SNAPSHOT_ISOLATION = ON
Select the SQL Server and Windows authentication option when you set the security properties for the database.
All products support Latin Collation for the SQL Server database. Use this statement: SQL_Latin1_General_CP1_CI_AS, However, if you are using Oracle SOA Suite (required as part of a Financial Close Management deployment), then Oracle recommends that the Financial Close Management database be kept separate and set it to SQL_Latin1_General_CP1_CS_AS."
Cheers
John
http://john-goodwin.blogspot.com/

Issue in Hyperion workspace tool menu

Dear all,
I'm using Hyperion workspace version: 11.1.2.1.0.83. I found a problem in the tools menu. The problem is " $ symbol in the tool menu" instead of actual menu names.
The following steps I followed before I found the $ symbol in the tools menu.
1) I login to workspace.
2) Clicked on Explore to view the reports.
3) Selecting the Tools menu.
Actual tool menu is having the following menus
Change Password
Change related Contents Links...
Change Database Connections...
Database Connection Manger...
Manage Key Figures....
Now the Tools menu is showing as follows.
${raframework,resources/cds_??.js MItemRelatedContentLinksLabel}
${raframework,resources/cds_??.js MItemChangeDatabaseConnectionsLabel}
${raframework,resources/cds_??.js MItemDatabaseConnectionManagerLabel}
${raframework,resources/cds_??.js MItemManageKeyFiguresLabel}
Kindly give your valuable inputs.
Thanks in advance
Regards
Raghuveer

Hello,
You should check at least for the following services. As Cameron suggested you can stop these services and then start them in the following order (always waiting at least a couple of seconds after the service is up and running..then continue with the next one):
1.Hyperion Foundation OpenLDAP
2.Hyperion Foundation Shared Services – Web Application
3.HTTP Server
4.Hyperion Workspace – Agent Service
5.HyS9ESBAgent11.1.1_hypservice_1
6.Hyperion Integration Services
7.HyS9aps
8.Hyperion Annotation Server
9.Hyperion Smart Search – Web Application
10.Hyperion RMI Registry
11.HyS9Planning
12.HyS9BPMA_ProcessManager.
13.HyS9EPMAWebTier
14.HyS9EPMADataSynchronizer
15.——WEBANALYSIS——-
16.HyS9CALC
17.HyS9Workspace.
Hope this helps.
Best regards

Could not start the hyperion workspace-web application Error 1067

Hi,
I have installed hyperion from scratch in a distributed environment...everything was working fine.......i.e. shared services, workspace, essbase, sql server, and hfm. I was able to logon and navigate different options in the hyperion products...but essbase stopped working when I re-started all four servers ....?
(1) When I restarted all four servers and stopped and restarted all hyperion services as per giving sequence then everything works fine but essbase EAS console and workspace web console...i was getting error message " could not connect to administration server" whenever i try to connect EAS console to essbase then I went to services there I saw workspace agent and workspace web application service is down.
(2) as soon as I started those both services then my shared services automatically stopped but I was able to logon in Essbase console and workspace console but my shared services are down...
(3) as soon as I start shared service they started but my workspace agent and workspace web application automatically stopped...and when I try to start again workspace web application then I get this error "[ Could not start the hyperion workspace-web application services on local computer. Error 1067: the process terminated unexpectedly]"
I have been searching online and googling but have a hard luck to get some best solution for this...can some one help me or guide me to walk through with this issue...
Thank you very much in advance ...
Regards,
Safi

I solved this issue...It was with Hyperion Services those were stop responding some how.....but I stopped each service and restarted then those started working again...
Regards,
Safi

Periodically Hyperion Workspace Will Hang with msg "Authenticating User.."

Hi,
Periodically Hyperion Workspace Will Hang with the Message "Authenticating User.." after Supplying the Username and Password for the Login. But FDM, Smartview are working fine. The problem is only with workspace.
No errors has been recorded in HSvevent log and workspace logs.
We are using Weblogic application server and the version is 11.1.1.3.
It is working fine once we restart the Hyperion workspace- Agent service.
Please advice the possible root causes for this, so that we can put a permanent fix for this issue.
Thanks

Hi-
I've encountered this issue in my slow network environment, and it was rectified after we've done the following:
Enable IE ActiveX controls:
1. Open Internet Explorer
2. Click the Tools menu, and then click Internet Options
3. On the Security tab, click the Custom level button
4. Scroll down the Security Settings list until you see ActiveX controls and plug-ins
5. Enable Automatic prompting for ActiveX controls
6. Scroll down to Download signed ActiveX controls and click Enable or Prompt
7. Scroll down to Run ActiveX controls and plug-ins and click Enable or Prompt
8. Scroll down to Script ActiveX controls marked safe for scripting and click Enable or Prompt
9. Click OK, and then click OK again
Add 3 DWord items to the registry under
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
ReceiveTimeout 900000
KeepAliveTimeout 900000
ServerInfoTimeout 900000
These values are in milliseconds. So, 900000 is 15 minutes
Access URL using the pop-up: http://server:19000/workspace, not the http://server:19000/workspace/index.jsp <-- not sure what's the differences on how this works, but apparently it worked well in my slow network environment.
Increase the workspace server timeout settings.
Use supported browsers in the Oracle certification matrix.
-William

Not able to run any IR jobs in hyperion workspace 11.1.2.2

Hi Everyone,
We are not able to any IR Jobs in hyperion workspace(11.1.2.2)
It's throwing error saying:
"Unable to perform request
A general error was encountered contacting the server.
Recommended Action: Contact your corporate technical support."
I have checked the services(DAS,BI and IR job ) and raframework too.Everything is working fine.
Can Someone please help me in resolving it.
Thnx,
Charan
Note:Before these jobs were running fine>

Thanks alot for you response.I have checked all IE Settings everything looks fine.Seems like the Issue is with IR JOB Config settings.
Dont know what make these all jobs failing at a time.
Below is the error we found:
Sep 10 02:13:46.690
com.sqribe.transformer.PublishLogEffectiveDateStorage.getEffectiveDate: Error while reading Oracle\Middleware\*******\Reporting\ReportingAnalysis\data\***\effdate.dat". null
com.sqribe.transformer.TransformerException: com.sqribe.transformer.PublishLogEffectiveDateStorage.getEffectiveDate: Error while reading Oracle\Middleware\u*******\Reporting\ReportingAnalysis\data\***\effdate.dat". null
at com.sqribe.transformer.PublishLogEffectiveDateStorage.getEffectiveDate(Unknown Source)
at com.sqribe.transformer.VirtualPublishLogStorage.init(Unknown Source)
at com.sqribe.transformer.VirtualPublishLogStorage.fetchPublishLogs(Unknown Source)
at com.sqribe.transformer.VirtualPublishLog.fetchPublishLogs(Unknown Source)
at com.sqribe.transformer.QueryPublishLogCommand.execute(Unknown Source)
at com.sqribe.transformer.subscription.MatchCandidatePullLoop.execute(Unknown Source)
at com.sqribe.transformer.subscription.MatchEngine.execute(Unknown Source)
at com.sqribe.transformer.ClientThread.run(Unknown Source)
[1009921]: com.sqribe.transformer.PublishLogEffectiveDateStorage, getEffectiveDate, null, effdate.dat
Thnx,
Charan

Hyperion EPM server - web application service does not start

Hi All,
I installed and configured epm 11.1.2.2 on windows 2008 server. I was able to start all the services except "Hyperion EPM server - web application" everytim I start the service I am getting an error "some services start and stop as they are not used by any other programs and applications'.
I reconfigured the web server and deployed the application server again but still I am having the same issue.
I was not able to see planning from the navigate of workspace and I am getting errors while trying to start the web analysis.
Can anyone please let me know where I am doing wrong..
Thanks a lot!

Hi John,
we deployed workspace, financial reporting, web analysis, shared services, planning web applications. we were able to access most of them except "web analysis".
we are getting an error while trying to login Web analysis "when starting web anaysis an error occured while initalizing startup options".
I have HP BL480 32 gb of RAM.
I am not getting any error while configuring but I am getting the error when trying toi start the service.
here are the log files for web analysis
[2012-07-20T15:51:20.714-04:00] [WebAnalysis0] [WARNING] [] [oracle.webanalysis] [tid: 192] [userId: <anonymous>] [ecid: 0000JY_wS67DoYdpxc4EyW1G2Qia000028,0] [SRC_CLASS: com.hyperion.analyzer.utils.general.HYAURLParamHandler] [APP: WEBANALYSIS#11.1.2.0] [SRC_METHOD: getAnalyzerBaseURL] AnalyzerBaseURL=http://ftldhyptest1.citrite.net:28080/WebAnalysis
[2012-07-20T15:51:20.718-04:00] [WebAnalysis0] [WARNING] [] [oracle.webanalysis] [tid: 192] [userId: <anonymous>] [ecid: 0000JY_wS67DoYdpxc4EyW1G2Qia000028,0] [SRC_CLASS: com.hyperion.analyzer.utils.general.HYAURLParamHandler] [APP: WEBANALYSIS#11.1.2.0] [SRC_METHOD: getAnalyzerBaseURL] AnalyzerBaseURL=http://ftldhyptest1.citrite.net:28080/WebAnalysis
Thanks a lot!
Edited by: user608296 on Jul 20, 2012 12:54 PM

Hyperion Workspace...

Hello Experts,
Whenever I run job in Hyperion workspace, it creates 3 outputs.
First is bqlog_<filename>,
second the simple output of the bqy file
third the web client version of the bqy file.
I want to hide the bqlog_<filename> from every user.
And even an user with Viewer and explorer provision is able to see the web client version output..well they are not able to open it but still they could it there on the workspace output folder.. so I even want to hide this outputs..
So please experts help me to solve the issue.
Thanks in advance.
Rahul.

Dear Dhanjit,
Thanks for replying.
But need more help.
We are currently on Hyperion 9.2 but at the same time i m getting another server ready with Hyperion System 9.3.1.
Now in the older system we have folders in workspace and in the same folder i m importing the .bqy as jobs and as well as getting the output in the same folder. But in the output folder the users( according to their provision ) cant see the unwanted things. Like i said before. So, I just want to replicate the whole thing to the new system.
So...
Lets say for example..
User1 who is provisioned as Viewer and explorer , logs in workspace.
He see the folder Folder1 in workspace..
Now I as an administrator , have imported a akp.bqy file as a job, scheduled it and everything else..got the output in the same folder i.e in the Folder1...
Now when the User1 open the output folder.. He could see 3 outputs
bqlog_akp.bqy
akp.bqy (simple version)
akp.bqy( Web client version)
As I mentioned before he is provisioned as a Viewer and Explorer.
He could see the content of bqlog_akp.bqy
He could see the content of akp.bqy (Simple version)
But when he tries to open web client version , it throws an error saying that he is not provisioned to see this file...
Thats is perfect ...he cant see the file ...as he is not provisioned..
And the issue is as an Administrator I dont want this user User1 to see the unwanted outputs.
So now may be you could help me with this problem...
Thanks and Regards,
Rahul.

Can proxy servers cause malfunction to Hyperion 931 server performance?

How does Hyperion system9 server software (IR/ PR/ Workspace/ Core/ HSS/ Planning) know which proxy server to use? And is there as place/ setting/ parameter to define one?
As a Technical Engineer of our Hyperion software I frequently argue with our network techies about (unclear and undescript changes to) ISA servers, proxyservers, webwashers, authenticating issues, etc. Their last change was a switch off from a old deprecated proxyserver. Now all our network traffic has to follow the new proxyserver. All company browsers are set up with a proxy wpad.dat configuration file. Browsers can perfectly deal with such setting. Also java applications on clients can be set up with a proxy configuration file (or set to use browser setting).
But what about the Hyperion Server components? How does the software know which proxy server to use?
Example: workspace servers communicate with Core server to “drop” its logs in a central place. Does this traffic go via proxies?

Your title is can proxy servers cause a malfunction -- of course if they are not working properly they could cause issues.
Your message body asks about workspace/core services -- internal Hyperion to Hyperion communications are all direct and not via proxy which means you usually have to open firewall ports between servers if they have a firewall between them.
In your example workspace communicates to core services on ports in the 68XX range and those specific ports most be open.
Regards,
John A. Booth
http://www.metavero.com

NetWeaver Developer Edition: Workspace Server Error every 2 Minutes

Hi there,
I installed SAP NetWeaver AS ABAP 7.02 SP6 32-bit - Developer Edition on Windows XP 32 Bit in a Virtual Machine with Virtual Box. My Host hase got 8 GB RAM and 4 x >3Ghz Processor and I gave 4GB Ram and 2 Cores to the Virtual Machine. 
The Installation was ok and the Systems works. But now I began to do some exercises (Add 2 Tables and some Types) and now Windows tells me after 2 Minutes I'm logged on Disp+Work.Exe --> an error occured. Then the SAP Workspace Server is rebooted and I can log on for the next 2 minutes. 
The Error Log tells me that the WorkSpace Process Died (?) but I dont know what to do... can anybody help? This is the Log:
 
 
trc file: "dev_disp", trc level: 1, release: "720" 
 
sysno 00 
sid NSP 
systemid 560 (PC with Windows NT) 
relno 7200 
patchlevel 0 
patchno 70 
intno 20020600 
make multithreaded, Unicode, optimized 
profile
testsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_testsap 
pid 3704 
Sat Nov 19 22:26:56 2011 
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC) 
length of sys_adm_ext is 588 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3704) [dpxxdisp.c 1268] 
 shared lib "dw_xml.dll" version 70 successfully loaded 
 shared lib "dw_xtc.dll" version 70 successfully loaded 
 shared lib "dw_stl.dll" version 70 successfully loaded 
 shared lib "dw_gui.dll" version 70 successfully loaded 
 shared lib "dw_mdm.dll" version 70 successfully loaded 
 shared lib "dw_rndrt.dll" version 70 successfully loaded 
 shared lib "dw_abp.dll" version 70 successfully loaded 
 shared lib "dw_sym.dll" version 70 successfully loaded 
 shared lib "dw_aci.dll" version 70 successfully loaded 
rdisp/softcancel_sequence : -> 0,5,-1 
use internal message server connection to port 3900 
rdisp/dynamic_wp_check : 1 
rdisp/calculateLoadAverage : 1 
 
Sat Nov 19 22:26:57 2011 
MtxInit: 30000 0 0 
DpSysAdmExtInit: ABAP is active 
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active 
DpIPCInit2: write dp-profile-values into sys_adm_ext 
DpIPCInit2: start server >testsap_NSP_00 < 
DpShMCreate: sizeof(wp_adm) 20000 (2000) 
DpShMCreate: sizeof(tm_adm) 4323912 (21512) 
DpShMCreate: sizeof(wp_ca_adm) 32000 (64) 
DpShMCreate: sizeof(appc_ca_adm) 32000 (64) 
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064 
DpShMCreate: sizeof(comm_adm) 556064 (1104) 
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0 
DpShMCreate: sizeof(slock_adm) 0 (96) 
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0 
DpShMCreate: sizeof(file_adm) 0 (80) 
DpShMCreate: sizeof(vmc_adm) 0 (1792) 
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192) 
DpShMCreate: sizeof(gw_adm) 48 
DpShMCreate: sizeof(j2ee_adm) 3920 
DpShMCreate: SHM_DP_ADM_KEY (addr: 08180040, size: 5055296) 
DpShMCreate: allocated sys_adm at 08180048 
DpShMCreate: allocated wp_adm_list at 08182F28 
DpShMCreate: allocated wp_adm at 08183020 
DpShMCreate: allocated tm_adm_list at 08187E48 
DpShMCreate: allocated tm_adm at 08187E70 
DpShMCreate: allocated wp_ca_adm at 085A78C0 
DpShMCreate: allocated appc_ca_adm at 085AF5C8 
DpShMCreate: allocated comm_adm at 085B72D0 
DpShMCreate: system runs without slock table 
DpShMCreate: system runs without file table 
DpShMCreate: allocated vmc_adm_list at 0863EEF8 
DpShMCreate: system runs without vmc_adm 
DpShMCreate: allocated gw_adm at 0863EF50 
DpShMCreate: allocated j2ee_adm at 0863EF88 
DpShMCreate: allocated ca_info at 0863FEE0 
DpShMCreate: allocated wall_adm at 0863FEF8 
DpCommAttachTable: attached comm table (header=085B72D0/ft=085B72D8) 
DpSysAdmIntInit: initialize sys_adm 
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL 
dia token check not active (3 token) 
MBUF state OFF 
DpCommInitTable: init table for 500 entries 
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm 
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80 
EmInit: MmSetImplementation( 2 ). 
MM global diagnostic options set: 0 
<ES> client 0 initializing .... 
<ES> InitFreeList 
<ES> block size is 1024 kByte. 
Using implementation view 
<EsNT> Using memory model view. 
<EsNT> Memory Reset disabled as NT default 
<ES> 1023 blocks reserved for free list. 
ES initialized. 
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE 
MPI: dynamic quotas disabled. 
MPI init: pipes=4000 buffers=159 reserved=47 quota=10% 
 
Sat Nov 19 22:26:58 2011 
rdisp/http_min_wait_dia_wp : 1 -> 1 
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654] 
***LOG Q0K=> DpMsAttach, mscon ( testsap) [dpxxdisp.c 12221] 
MBUF state LOADING 
DpStartStopMsg: send start message (myname is >testsap_NSP_00 <) 
DpStartStopMsg: start msg sent 
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off. 
DpMBufHwIdSet: set Hardware-ID 
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296] 
MBUF state ACTIVE 
DpWpBlksLow: max wp blocks in queue is 400 (80 %) 
MBUF component UP 
DpMsgProcess: 1 server in MBUF 
DpAppcBlksLow: max appc blocks in queue is 250 (50 %) 
 
Sat Nov 19 22:27:59 2011 
DpModState: change server state from STARTING to ACTIVE 
 
Sat Nov 19 22:33:38 2011 
ERROR => DpHdlDeadWp: W0 (pid 2012) died (severity=0, status=0) [dpxxwp.c 1522] 
Edited by: frankie2209 on Nov 19, 2011 10:59 PM
 
C:\usr\sap\NSP\DVEBMGS00\work --> file dev_wi shows an error:
 
M Sat Nov 19 22:28:10 2011 
M *** ERROR => alert/MONI_SEGM_SIZE not set. Monitoring switched off. [alxxmoni.c 10094] 
M {root-id=080027A0577D1ED184DEABD3CD8E66BD}_{conn-id=00000000000000000000000000000000}_0 
 
M 
M Sat Nov 19 22:28:11 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
A 
A Sat Nov 19 22:31:21 2011 
A GENER starting remote generation: SAPLSED6 (requested by W0). 
S 
S Sat Nov 19 22:33:18 2011 
S found spool memory service RSPO-ACTIONS at 11B99D88 
M 
M Sat Nov 19 22:37:18 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
M 
M Sat Nov 19 22:47:18 2011 
M ThrtGwMonTrustedIpAddr: 1. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 2. 10.0.2.15 
M ThrtGwMonTrustedIpAddr: 3. 10.0.2.15 
M 
M Sat Nov 19 22:56:51 2011 
M in_ThErrHandle: 1 
M ThIErrHandle: new stat of W1 is WP_SHUTDOWN 
M ThIErrHandle: I'm during shutdown 
M PfStatDisconnect: disconnect statistics 
M ThIErrHandle: entering ThSetStatError 
C CANCEL rejected, because there is no SQL statement active 
B db_sqlbreak() = 1 
M ThCallDbBreak: no sql statement active 
M ThIErrHandle: don't try rollback again 
M ThShutDownServer: shutdown server 
M ThCallHooks: call hook >Shutdown PXA< for event BEFORE_SHUTDOWN 
A Saving PXA statistics. 
A 540 programs loaded. 
A file pxanew opened. 
A 540 entries written. 
M ThCallHooks: hook >Shutdown PXA< o.k. 
M PfStatIndInit: Initializing Index-Record 
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf 
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
B dbtbxbuf: Saving TBX statistics: 
B dbtbxbuf: 40 object entries written. 
B Disconnecting from ALL connections: 
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 001 000 R/3 000000000 INACTIVE NO NO NO YES NO NO 000 255 255 20111119 222712 testsap
C Disconnecting from connection 0 ... 
C Now I'm disconnected from MaxDB 
B Disconnected from connection 0 
B statistics db_con_commit (com_total=97, com_tx=19) 
B statistics db_con_rollback (roll_total=0, roll_tx=0) 
M ***LOG Q02=> wp_halt, WPStop (Workp. 1 3304) [dpnttool.c 339] 
 
 
Edited by: frankie2209 on Nov 19, 2011 11:18 PM
 
Now I saw in syslog in SAPMMC that when I start the ApplicationServer "NSP" ive got an Error:
"Communications data: Service initialization failed" (Process Type RD, PID 03356 , Message ID S10 But message_server.exe and disp+work.exe are running green and i can log on into sap. and then after 1 minute the explaned error occurs.(WorkspaceProcess is restarted and sapsession breaks down - i have to log on again)
Edited by: frankie2209 on Nov 19, 2011 11:45 PM

Please check the value of the parameter PHYS_MEMSIZE in the file <Drive>:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_testsap . Set the value to 2048M. Also set the page file size to 10GB. Ensure you have space on disk to allocate space for paging.

Java error while opening Batch Scheduler in Hyperion Workspace

Hello Guys,
I get this error while trying to open the Batch Scheduler in Hyperion Workspace. Please assist.
Error:
; nested exception is:
java.lang.NullPointerException

Hello Everybody,
I have recently installed Hyperion 11.1.2.2(Foundation Services and Interactive Reporting) in our environment.
The installation and configuration are successful. Also when I ran a sample BQY it works fine.
If I try to run the sample programs on the Hyperion server in their actual location, they work fine.
I am having problem setting up the SDK remotely and run the sample program.
I am getting the following error when trying to run the sample Login.java provided in /EPMSystem11R1/products/biplus/SDK/samples/java/
Unable to setup SDK for Hyperion 11.1.2.2 remotely
Please help, thanks in advance

Interactive Reporting is not opening in Hyperion workspace

Hi,
I have installed Hyperion Foundation Services 11.1.1.1.0 and IR 11.1.1.1.0
I am trying to access IR through Workspace
I could see the procedure like File-> New-> Document_> interactive reporting document.
Then i have selected a .oce file to make connection. but i am not able to progress to the next window.
after selecting .oce file a new pop up is getting populated.Then it is closed automatically in a fraction of second...
I dont know what is the problem.
Kindly Help.
Thank you.
Regards
GATHATHARAN K
Hi all,
I have tried the same with Mozilla Browser.
Here I am ablwe to open a page saying
Checking Hyperion Interactive Reporting Web Client status......
then another one new win dow is getting opend.
In that window It was asking for the
"Press the 'Begin' button to start the installation."
asking for a confirmation.
I hav pressed Begin then an error comes
"Firefox could not install the file at
http://10.23.7.6:45000/InsightInstaller/Insight.xpi?-l0009
because: Download error
-228"
Please help me
Thank you.
Reagrds
GATHATHARAN K
Edited by: gatha_vdm on Mar 23, 2009 8:25 AM
Edited by: gatha_vdm on Mar 23, 2009 8:37 AM

Hi bhanu,
Thanks a lot for ur immediate reply
I couldnt see any service in the name of IR.
I could see only "Hyperion Annotation Server"
I have started the service as follows... please check.
Hyperion Apache 2.0-(Apache/2.0.61 (Win32) mod_jk/1.2.25)
Hyperion Foundation OpenLDAP
Hyperion Foundation Shared Services - Web Application
(Hyperion Shared Services that support Hyperion applications, including authentication, user provisioning, task flow management, data and metadata synchronization.)
Hyperion Workspace - Agent Service
(HyS9Core1, Provides service infrastructure to run services locally).
Hyperion Annotation Server
(HyS9Annotation - Provides Annotation support for Hyperion products).
Hyperion Workspace - Web Application
(HyS9Workspace - Hyperion Workspace - Web Application web application for Tomcat 5.)
For the second error
I could not see any option named
programs--Hyperion--Intercative Rporting--Utilities and Administratio--Service Configurator--Local Service Configurator
i could see only a service configurator under workspace-> utilities and administration.
Thanks a lot
Regards
Gathatharan K

Shared Services - LCM pointing to the wrong Hyperion Planning server

Hi,
I created 2 Planning applications and created a Shared Services application group called "Planning" where I assigned both during creation.
I navigated to the Shared Services console and went to the application group to check both. When I press any of them I get the following error:
EPMLCM-30053: Failed to connect to "http://<server name>:19000/HyperionPlanning/servlet/HspLCMServlet" while performing explore/listing for application - "FrcApp".
Received status code -"404" with error message - "Not Found". Possible cause of error Server Down or Not reachable.
The problem I'm having is that the <server name> that is appearing is not the one where Planning is, but the Essbase server. Where do I change this to correct the problem?
Thank you

Hi,
i think we need to register that application again.
goto the workspace, open the particular planning application then goto Administration --> Application --> Settings
There you find the Register with Shared Services.
Regards,
mady
please mark the replies with helpful or correct to help others

How to Schedule Hyperion IR 9.3.1 reports on Hyperion Workspace

Hi All,
I am new to this Hyperion Workspace.
Can anyone please guide me how to schedule a report on workspace?
What are the things need to be considered before uploading the report on workspace or during the process?
Can I schedule a report which will save the report with result after the job is complete?
Thanks In Advance.
Ujjawal
Edited by: [email protected] on Mar 26, 2009 2:04 AM

Hi Ujjawal,
To run or schedule the reports in the workspace first we need to have a connection file which is the OCE. See the below steps.
--Launch IR studio and create a OCE file which connects to the source database and save the file (By default it will be .bqy file)
In the Hyperion server Goto StartPrograms--Hyperion--Interactive Rporting--Utilities and Administration and Launch service configurator.
--Now click on 3rd icon which is the Local service configurator and login with an admin account (Default: admin, Password: password).
--Select DAS_SERVERNAME and goto properties there will be a tab for Datasource selct it and add a new datasource.
--restart your Hyperion Core and IR and workspace services.
--Launch workspace
Navigate to the folder in which to place the file.
2 Select File > Import > File.
The first Import dialog box opens.
3 Click Browse, navigate to the folder where the desired Interactive Reporting connection file is located, select
the file and click Open.
The name of the selected Interactive Reporting connection file populates the File field on the
Import dialog box.
4 Click Next.
The second Import dialog box opens.
Click Finish
Now import a BQY as a File as Job and select and browse the file and next give your OCE connections and go next and select the time would like to run the job by selecting the Custom Event.
If you want to schedule a job, you can right click on the file and then add a schedule.
Hope this helps.
Do let me know if you have any queries.
Thanks,
BHANU

Hyperion workspace server down issues

Similar Messages

Maybe you are looking for