Hyperion workspace username and password

Hi all,
what is the default user name and password for hyperion workspace ..
i tried out with admin & password , but it is saying provide valid user name& password...

Hi
You can provision admin user to BIPlus by login into sharedservices
login to shared services
go to user directories
select user
right click on user and click om provision
give the appropriate provision to the user
save the change
Thanks
Dhanjit G.

Similar Messages

  • Hide workspace username and password in link connection

    I'd like create short icon connect to workspace; I'd like to have workspace, username and password in URL, instead of typing everytime;
    I know that appliction is 4550; How to pass workspace, username and password
    Thanks MB

    you may change the userID/ passwd from menu or create conn segment for each of the userID/ passwd combination .

  • Default Workspace, Username and Password for new New Apex installation

    Hi Guys,
    I have newly installed Apex in my system. I am trying to log into Apex as Admin. I used the credentials below:
    Workspace : System
    Username : Admin
    Password : whatever password i used for the installation.
    It says invalid credentials. Even i changed the Admin password from backend, but its not working. So i doubt the workspace iam giving is invalid.
    any idea??

    Its not system workspace, its INTERNAL workspace you are trying to log in...
    Regards,
    Smith

  • APEX username and password

    Hi,
    I have ORACLE XE with APEX 3.1. I have had no problem with the setup until today when I accessed the image folder via http://127.0.0.1:8080/i now if I try and log in before I even get the home page with workspace, username and password I get a windows dialog box pop up saying: The server 127.0.0.1 at APEX requires a username and password.
    any ideas what it is looking for?

    Never mind. I restarted the database and it seemed to rectify itself.

  • Re:  Invalid username and password when logging onto Hyperion workspace

    Hi,
    I have installed Hyperion Reporting and Analysis services.When I attempt to log on to Workspace, I get the following message;
    'You must supply a valid User Name and Password to log onto the system."
    I have tried using the admin and password as username and password.I am able to login to Essbase Administration Services and User Management Console using this account.I have provisioned the user to Hyperion System 9 BI+ .
    Thanks in advance.
    -Sowmya

    I was told that Dsun.net.inetaddr.ttl=0" is required to be passed to the web application server (JVM) that starts Hyperion Shared Services and all System 9 products that depend on Hyperion Shared Services
    Is this correct? I see these errors in the log when I try to log into Workspace in the morning:
    2010-03-24 08:26:03,509 [[ORB=_it_orb_id_1,Pool=1]::id-12] WARN com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(Unknown Source) - javax.naming.ServiceUnavailableException: ldaps.lirr.org:636; socket closed; remaining name ''

  • Default username and password Oracle Hyperion workspace/shared services

    Hi Friends,
    I had installed Install Oracle Hyperion Planning, Fusion Edition Release 11.1.1.3.0 (foundation services and planning)
    but i am unable to login to workspace,shared services
    what is the default username and password for these.Please let me know?
    Regards,
    DB

    Hi,
    Default Admin user is: admin and default PW: password.
    If you have not yet changed.
    Thanks
    Focusthread Hyperion Trainer
    [http://focusthread.com/training]

  • You must supply a valid username and password in Hyp 11.1.1.3.0

    HI,
    We have successfully installed New version of Hyperion 11.1.1.3. Configuration is successfull. When running validation one error occurs.
    We are unable to log in workspace as we are required to 'supply a valid username and password'. We log in as admin/password but this is not working.
    When I change it is shared services console it does not solve this issue.
    Can you please advice of what shall be done to get over this?
    thank you
    lubos

    This is not the Hyperion/Essbase forum.

  • You must supply a valid username and password to log onto the system.

    hi,
    i installed hyperion performance suite8.3 on linux by root account,during installation, i select "native" authentication, after installation, when i login the web interface by root account, it tell me:
    You must supply a valid username and password to log onto the system.
    who can help me?
    thanks

    Do you have any projects listed in Shared Services ?
    ... you are also using
    Did you put in the right url when you did the HFM config ?
    check the httpd.conf file for server name and listening port number ....
    what port are you using to login to workspace ?

  • Changing DB username and Password for APEX

    Hello Guys:
    My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
    My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
    I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
    Thank You For Your Help
    Adel

    Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
    When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
    Thank You
    Adel

  • APEX is running. I'm at the login page. Now I can't remember my admin username and password

    After hours upon hours of finding fixes to get Oracle Application Express running, I am now on the verge of finally getting the test environment setup. In the frustration, I have now forgotten my username and password that I had when I created the thing.
    Help?
    BTW, is my default workspace called "Internal?"

    login with sys account over installation folder..
    e.g C:\apex>sqlplus
    connect:sys/xe@xe as sysdba
    SQL:>@apxchpwd
    You can reset ADMIN password(e.g Apex_4.2)

  • Database App Development VM (Nov 2011) APEX username and password

    Does anyone know the Workspace names, usernames and passwords for Instance Admin(Internal workspace), Developers and Users for the latest Database App Development VM (Nov 2011) available from OTN?
    The VM forum is very quiet/unhelpful.
    NOTE it is NOT
    obe/obe/obe
    or
    oracle/oracle
    or
    admin/admin
    thanks in advance
    Paul

    OK I followed Roel's suggestion and changed the ADMIN password using the apxchpwd.sql utility. There is no other way as there are no users defined in APEX except the instance administrator ADMIN
    MAKE SURE you run V4.1 of apxchpwd.sql as V4.0.1 doesn't work and gives a security error. (Down load APEX 4.1 from OTN then extract apxchpwd.sql from the APEX directory.)
    If you now try and connect to APEX and get an error in the browser (firefox) INTERNAL ERROR then shutdown the VM and restart it.
    you should then be able to log onto the Instance Administrator as follows:
    WS: Internal
    UN: ADMIN
    PW: <what you changed it to in the apxchpwd>
    After you log on you will be asked to provide a new ADMIN password with all the naming restrictions enabled. (these can be turned off later, under manage instance...security settings. Under "Service Administrator Password Policy" change the radio button to "Use policy specified in Workspace Password Policy")
    After logging into the workspace manager you will see that the OBE workspace has a status of TERMINATION_IN_PROGRESS5 .
    If you want to retain this WS then create the OBE user as a workspace administrator and developer in the OBE workspace. If you set OBE/obe as the UN/PW
    then you can log out of the Internal Workspace and log back in as the OBE developer and start application development.
    Amazing how none of this is documented in the download! If you don't know much about APEX then you are locked out!
    PaulP

  • Default Username and Password for Sample Packages

    Hello,
    What is the default username and password for sample packages mentioned in this article for all the sample packaged applications?
    http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#PACKAGED
    Regards
    Edited by: user20090209 on May 19, 2010 1:37 PM

    Hi,
    Try same user name and password as you login to your workspace.
    Most of applications use Application Express authentication
    Br,Jari
    Edited by: jarola on May 19, 2010 9:06 AM
    And when you have downloaded and installed application to your workspace, you can always change authentication

  • Mysql username and password

    Hi All,
    I have installed 9.2.0 and the Mysql is also installed with the hyperion.
    And now when i configure the same it is asking me for the username and password when can i get that.
    Please help.
    Regards,
    Mink

    Are you talking about configuring shared services ?
    From the docs
    A MySQL database is installed automatically with Shared Services. During configuration, you can specify the
    database name, username, and password to use.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Creating Username and Password

    Starting the HTMLDB for the first time, it asks me for username and password. Where do you configure this information?

    Go to http://host:7777/pls/htmldb/htmldb_admin
    then login with ADMIN and the password that you put in the Configuration Assistant at install time...
    There you can create a workspace to start your apps!
    Joao Oliveira

  • Reporting Services username and password prompting

    We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
    them for a username and password and will not allow them to connect even if the correct username and password is correct.
    I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
    What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
    DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.

    Hi bubba1984,
    As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
    a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
    To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
    http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for