Hyperlink color and publishing wierdness

I've used the tutorial at 11Mystics to change hyperlink colors in my blog templates and in the existing pages. In each case, I made the changes one at a time and then checked in iWeb to make sure they worked. Every page displayed in iWeb exactly as I wanted.
Then I published all to .Mac. Viewing the blog entries in Safari, some of the links appeared blue while others were still the default gray. In at least two blog entries this is true within a page - some are blue some are gray. I tried recreating those pages thinking that the newly edited template would fix it. Again, in iWeb everything appeared fine but in Safari the same result. I cleared the Safari cache and relaunched with no change.
Then it occured to me to check in Firefox. There all of the links are perfect. If this was as far as it went I'd attribute it to Safari problems. But I also checked using Firefox on my office PC and there most of the links are correct but a couple are still gray. So that is three different results. I'm very perplexed. The only thing I can think of is that in the two browsers where it isn't quite right, I've viewed some of these pages before whereas in Firefox on my Mac I hadn't (I rarely use Firefox on the Mac). On the PC and in Safari I've cleared the cache so I don't see why previous viewing would be an issue.
In case anyone wants to have a look:
http://web.mac.com/dmath/iWeb/Woodworking/Blog/Blog.html
Choose the top entry. There should be three blue links. In Safari on my iBook only the first one (Bridge City Tool Works) is blue.
I'd appreciate any help with this. Thanks.
David
Message was edited by: dmath

More information: I just tried it on my kids' Mac Mini running an old version of Safari. All of the links display perfectly. It must be a cache issue. I'll have a look around on the Safari discussion board to see if I can find anything.
David

Similar Messages

Changing hyperlink color and format in numbers 3

Hi all!
I want to change the automated color (and format: underline etc.) that is assigned to hyperlinks.
In my file I use vlookup to get the email and webadresses from a different source table. In the source table, I've tried disabling the hyperlinks and give different colors. In the destination table (different sheet), it keeps reformatting the @'s and www to hyperlinks. Smart link substitutions are off..
Manually changing the text color in the destination cell doesn't work, probably because of the vlookup formula?
hope you guys can help me out, thnx in advance!

Hi Eliakim,
Turning off Smart Link Substitutions does not 'kill' existing active hyperlinks. It prevents the automatic conversion of an address that is subsequently typed or pasted.
I pasted an active hyperlink into a Numbers cell, and it remained active even though Smart Link Substitutions was off.
When I did Menu > Edit > Paste And Match Style the hyperlink was not active.
Try this. In your source table, select and copy the hyperlinks. While they are still selected, Paste And Match Style. They will still appear to be hyperlinks (blue text underlined) but will be inactive (I assume that is what you want).
See what that does to the text inserted by vlookup in your destination table.
Regards,
Ian.

Will changing to 08 remove all my iWeb sites already designed and published

I have a ton of web sites already designed and published with iLife 06 and my dot mac account. I bought iLife 08, but before I install it, I want to make sure it's not going to delete my sites. Does it automatically put them into 08 or what? If it does put my other sites into 08, are they still editable then in 08?

You will not lose any of your already published and saved iWeb creations. The only problem I ran into when I updated was that most of my text hyperlinks were a different size font and the navigation menu at the top was aligned slightly differently (I had a graphic behind mine). Just little tweaky details like that. That change is only on your saved iWeb files on your computer, which means you can fix it before you upload it to the web for all to see. You will probably only have that problem if you modified the default template fonts like I always do. If you stuck with the templates, you should be fine.
Once you do update, it is worth it! You are only able to do more than before without losing anything you have already created, at least in my experience. There are a ton of little things that get me closer to creating the website I envision - like being able to choose the hyperlink colors and formats.
So install it and enjoy without any worries. In my book you have nothing to lose.

Color and styles of the performance point scorecard changing between designer and published version.

Greetings specialists!
I'm experiencing a problem with one of my scorecards. I designed the scorecard using performance point dashboard designer and used it to color the top level KPI letter white. The rest of the letters is using a dark grey, but when I use the socrecard in a
webpart in a performance point webpage all the letters appear colored in dark grey including the top level kpi letters which in the designer have been parametrised to use white.
Is it some sort of problem or known bug? It there any reason that can explain this erratic behaviour? Maybe it's inheriting the style from something else??! Any ideas clues or something I can do to help solve the problem?
Thanks in advance!

The first thing will be to determine what is overriding the colors. Follow this guide to select the object that is the wrong color and post a screenshot of the CSS styles that are being applied (in the right panel).
http://msdn.microsoft.com/en-us/library/dd565627(v=vs.85).aspx
Dimitri Ayrapetov (MCSE: SharePoint)

Hyperlink color doesn't change when hovering over link

I create hyperlink, color I select for hovering over link works fine. But sometimes when I publish to my website the link color does not change, but the link works ok. I go back to my mac and check, sure enough the color changes just fine. I wipe out the link and reinsert new one. Works fine on the mac, but when I publish, color does not change when hovering. Help.

Welcome to the discussions. This is a long shot, but try clearing your browser's cache and reloading the page — then see if the color changes when hovering. ( In Safari, click on the Safari menu and choose +Empty Cache...+ )

Hyperlink color not showing up

I can get the hyperlink to be a color when I'm editing/composing a blog entry; but when I publish it, it looks black until you roll over it. You can't even tell it's a hyperlink unless you would accidentally roll over it. What am I doing wrong?

I'm having the same problem with hyperlink colors viewed in Safari 3.1.2, whether Normal or Rollover Format. Firefox 3.0.1 displays the colors as formatted in iWeb. I was having this issue prior to and still with iWeb 2.0.4. Click here to see what I mean and look at the links in the text box. I have the Normal color set to Midnight and the Rollover color set to Steel in iWeb.
Update; Actually, Firefox is not displaying the colors 100% either. At the bottom of the text box where it says photo gallery and resume, photo gallery is not in the Midnight color.

Create Hyperlink in XML Publisher

Hi,
Can anyone tell me how to create the dynamic hyperlink in XML Publisher Report and design the same in RTF Template.
Thanks in Advance.
Regards,
Partha

Hi
Did you check the client install samples folder ? there are a couple of almost real examples in there.
Note you can not run these templates thru the template builder ... its a different processor. To see it working us the java app Template Viewer installed along with the word plugin.
tim

Hyperlink Colors

We are experiencing a minor problem with hyperlink colors, specifically "visited" hyperlinks. The color is not changing. I have checked the browser and the settings are set to colors for the visited and unvisited links.
Is this setting controlled anywhere in the Web Server?
Jeff

No, Web Server has no control the colour of hyperlinks. The colour for visited links can be controlled by style sheets and/or HTML attributes; check the HTML source and any associated style sheets.

Photos Change Color When Published

Good morning,
Wondering if anyone might be able to advise me on why the colors of my photos appear washed out when I publish my iWeb page to a folder. When I open the page in Firefox the colors are not as vibrant and saturated as when they are in iWeb. Would this have anything to do with iWeb compressing the photos when publishing to a folder?
All photos have been added to iWeb as jpegs.
Thanks for your time.
Cheers,
John

John:
How do the photos look with Safari? I vaguely remember a thread which mentioned that Firefox didn't manage color and Safari did or something to that effect. What is the color profile in the photos (sRGB is preferred for web use) and do you have iWeb setup to optimize photos upon importing?

Hyperlink color

Is ther a way to change the hyperlink color? I created a new hyperlink style but when I enable the hyperlink, it pops back to the orinal color (red!).
Please help.

See that topic in iBA Tips and Tricks 01

Make whole Text clickable (or change Hyperlink color)

Dear madams and sirs,
the issue is the following: I have some text that needs to respond to MouseClicked.
This text NEEDS to be orange - that's why i use a Text control.
Problem: it only catches a click on the strokes and not inbetween.
Possible solution: Use a Hyperlink control. But I cannot work out how to change it's color to orange.
So how on earth can I either make the whole Text clickable
OR change the color of the Hyperlink (any other way apart from css?) ?
p.s.
is it possible here to confine the search to specific forums?

After hours I finally found a way to work myself around these two still unsolved questions:
instead of the Hyperlink or Text simply take a Label, insert text, give it a color
and put a transparent Rect on top of it. The Rect does the mouse listening.
so another question arises:
Why does the Label not respond to any mouse event? In my case it did not even support the change of cursors?

New Hyperlink Color

I am having trouble changing a hyperlink color.
My default is red and I wwant it to be blue.
I create a new hyperlink, modify the font, size, and color as I want.
I "Create Character Style From Selection".
When I use Link Inspector - Enable as a hyperlink - email, it changes font and size, but not color.
The default red is always used.
This happens if I make the text a link first or if I make the changes first and then make it a link.
What am I doing wrong?
Default: My Hyperlink
Desire: My Hyperlink
Muchas Gracias

Here is how a new Hyperlink 2 looks on my iMac in iBooks Author:
The Character Style is blue, but the text stays red. And here it is on my iPad:
Hard to see, but it is in blue as it should be.
So why do my efforst to modify show up correctly on the Mac?

Input and Publish settings for 8mm film using PreRes422.mov

I'm using Premiere 12 on Windows 8. I just got a sample from the company that converted 8mm film to 720HD ProRes422.mov onto a DVD.
I loaded into Premiere 12 without problem and can see, edit and publish.
However, what would be the best Input settings?
Also, I plan to burn to play on a BluRay player for my HDTV. What would be the best Publish settings?
Any other settings or adjustment I should use to improve the image?

AlanKL
Good news. That footage is not AVCHD.avi. What you have is MotionJPEG.avi which is usually not good news for Premiere Elements. But, if you can import it in the first place, let us give it a go.
The video is 1920 x 1080 @ 29.97 frames per second. The GSpot codec program does not tell us if interlaced or progressive. The way to determine that for sure is with the MediaInfo readout. But, let us try to avoid that with a "try and see" approach.
1. Open Premiere Elements 12 to its Expert workspace, and import your video into the project with Premiere Elements' Add Media/Files and Folders/Project Assets. From Project
Assets, drag the video to the Timeline. Does it have an orange line over its content? If no, then our project preset stays at
NTSC
AVCHD
Full HD 1080i30
And, we have the correct project preset. What does the playback in the Edit area monitor look like?
If there is an orange line over the Timeline content, we don't have the right project preset. So, close that project, and open a new one.
2. In the new Premiere Elements 12 project to its Expert workspace, with the File Menu/New/Project route, manually set the project preset for
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
Then import the video into the project with Premiere Elements' Add Media/Files and Folders/Project Assets. From Project Assets, drag the video to the Timeline. Does it
have an orange line over its content? If no, then our project preset stays at
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
There will be no colored line over the Timeline content if we have the right project preset. What does the playback in the Edit area monitor look like?
At this point, please let us know the results, and we will decide what next.
Thanks.
ATR

Reader converts text with http in it clickable. How to have it be colored and/or underline?

I've got a word document with text that contains http://blabblah.com which is not hyperlinked in word. I save it as a PDF file. When I read it with Adobe Reader, it will recognize it as a link since it starts with http:// and will make it clickable which is fine. But, I also want it to change the font, color and/or underline it to make it appear as a link and not just text. How do I do that in Adobe Reader? Is there a setting I can change or ???

Adobe Reader cannot do this. Even in Adobe Acrobat it is tedious and uncertain task. Set all the font attributes in Word.

I have lost the ability to change fonts,use color and size and when I try to write anyone,I cannot see my mailing list and there is no send button.

A few months ago my ability to use different fonts, colors and sizes suddenly disappeared. These choices were always available when looking at my email and I used them regularly . No one I asked ever heard of such a thing happening. I left it alone until I found someone to help. Then, a few days ago, when I clicked "write" , two things happened. First, I could not forward, reply or even see my collected email addresses. Second, there was no longer a place that said "send". My email page filled the entire screen and when I scaled it down, there was still no way to see my list or to send. I am a novice when it comes to fixes and terms but, I have asked people who have some experience with PC's they were stumped. I contacted Fairpoint and they said it must be a Thunderbird problem. Most of the people I asked said they didn't know Thunderbird. One suggested that I reinstall T.bird but, said I also might lose everything on my PC. I would appreciate any help you can give. Thanks, Jim

When you click Write and open the new message editor, press Alt to show the Menu Bar, then enable all the toolbars under View/Toolbars. Plus, press F9 to show the Contacts sidebar.

Hyperlink color and publishing wierdness

Similar Messages

Maybe you are looking for