Hyperlink Color Problem

I've built a simple website in iWeb08. My hope was to make the links Brown. While they looked that way in iWeb08 when published (to a folder or the web) they were black.
I've since done a workaround and italicized all the text in the links and made them black (all are text) and that will do for now.
Any thoughts on what I may have been doing wrong? This is not a problem I've been able to find reports of by Search Forum
Phil http://philwheeler.net/

So the links at the top of the page are not the default links that iWeb creates, right? If that's the case just select one of the links and go to the Inspector/Link/Format pane and set the normal, rollover, visited and disabled color as seen in the screenshot below;
You should be able to set the colors you want as long as the links are text based.

Similar Messages

Hyperlink Colors

We are experiencing a minor problem with hyperlink colors, specifically "visited" hyperlinks. The color is not changing. I have checked the browser and the settings are set to colors for the visited and unvisited links.
Is this setting controlled anywhere in the Web Server?
Jeff

No, Web Server has no control the colour of hyperlinks. The colour for visited links can be controlled by style sheets and/or HTML attributes; check the HTML source and any associated style sheets.

Hyperlink color and publishing wierdness

I've used the tutorial at 11Mystics to change hyperlink colors in my blog templates and in the existing pages. In each case, I made the changes one at a time and then checked in iWeb to make sure they worked. Every page displayed in iWeb exactly as I wanted.
Then I published all to .Mac. Viewing the blog entries in Safari, some of the links appeared blue while others were still the default gray. In at least two blog entries this is true within a page - some are blue some are gray. I tried recreating those pages thinking that the newly edited template would fix it. Again, in iWeb everything appeared fine but in Safari the same result. I cleared the Safari cache and relaunched with no change.
Then it occured to me to check in Firefox. There all of the links are perfect. If this was as far as it went I'd attribute it to Safari problems. But I also checked using Firefox on my office PC and there most of the links are correct but a couple are still gray. So that is three different results. I'm very perplexed. The only thing I can think of is that in the two browsers where it isn't quite right, I've viewed some of these pages before whereas in Firefox on my Mac I hadn't (I rarely use Firefox on the Mac). On the PC and in Safari I've cleared the cache so I don't see why previous viewing would be an issue.
In case anyone wants to have a look:
http://web.mac.com/dmath/iWeb/Woodworking/Blog/Blog.html
Choose the top entry. There should be three blue links. In Safari on my iBook only the first one (Bridge City Tool Works) is blue.
I'd appreciate any help with this. Thanks.
David
Message was edited by: dmath

More information: I just tried it on my kids' Mac Mini running an old version of Safari. All of the links display perfectly. It must be a cache issue. I'll have a look around on the Safari discussion board to see if I can find anything.
David

Hyperlink color not showing up

I can get the hyperlink to be a color when I'm editing/composing a blog entry; but when I publish it, it looks black until you roll over it. You can't even tell it's a hyperlink unless you would accidentally roll over it. What am I doing wrong?

I'm having the same problem with hyperlink colors viewed in Safari 3.1.2, whether Normal or Rollover Format. Firefox 3.0.1 displays the colors as formatted in iWeb. I was having this issue prior to and still with iWeb 2.0.4. Click here to see what I mean and look at the links in the text box. I have the Normal color set to Midnight and the Rollover color set to Steel in iWeb.
Update; Actually, Firefox is not displaying the colors 100% either. At the bottom of the text box where it says photo gallery and resume, photo gallery is not in the Midnight color.

Macbook display color problems

macbook, mac os 10.5.8 updated, display color problem. when i try to fix it by color sync. it says:
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
Repair done - 0 out of 2 profiles fixed.
Kindly assist what to do.

Welcome to Apple Discussions!
Pictures would help. A good way to do this is to post them to a free photo sharing site like Flickr and then post a link.
Also, you are in the original MBP section, and I think you need to post your question in the newer MBP section:
http://discussions.apple.com/forum.jspa?forumID=1294
Good luck!

Lightroom 4 color problem

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develope setting is set to "none" , the box is unchecked "apply auto tone adjustments". I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. What could the issue be?

monitor NEC 2690 wuxi
eye-one display 2
Original message
From: twenty_one
To: [email protected]
Received: 2/10/2013 12:30:42 PM
Subject: lightroom 4 color problem
Re: lightroom 4 color problem
created by twenty_one in Photoshop Lightroom - View the full discussion
Yes, that certainly looks like a problem with the Lightroom rendering. Skin tones and red in general is clearly off, while Windows Photo Viewer looks good.
I'm almost certain this is a problem with the monitor profile. As troubleshooting, try to set sRGB as monitor profile (or Adobe RGB if your monitor is wide gamut), and see if the difference persists. But try to recalibrate first.
What calibrator and what monitor?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5062403#5062403
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5062403#5062403
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5062403#5062403. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

A color problem in Apple's publishing App

I was wondering if you could help me with this problem，I really need some help，and here it is：
There is a Color problem in Mac publishing applications like Pages and Keynote，including iBooks Author，which really confuse me a lot。
When you use a certain color space（sRGB IEC61966-2.1 in this case）to create some colors with Apps like Illustrator CS6，Indesign CS6 & Photoshop CS6 etc. ，they look totally fine。BUT when you use iBooks Author （V2.0）to create the very same color with the very same color space，colors still look fine in the color panel，and here comes the problem：they look totally lousy in the actual document！！In fact，they look much lighter and faded。（See Image 1&2）
Above：Image 1
Above：Image 2
And this is also terrible with photos you import。（See Image 3）
Above：Image 3
Please tell me what I can do to solve this problem。I know maybe this is some sort of “basic” and “general” knowledge，but I really need your help。And I can't thank you enough if you can provide some effective solutions。

As far as I can see, the colour pallet and how colours are seen in any app on YOUR machine will depend on the computers System Preferences>Displays>Colour - choose your preferred setting.
I suggest first that you ensure that your colour profile settings are the same ( as your computer) in whatever Adobe application or in fact any outside image processor you use.
Creating or using a colour profile in Adobe and having a different profile on your system - will tend to give different colour hues.
A point also to remember is whatever you set up and is transferred to your product... when seen on an iPad may well be totally different again due to peculiarities and contrast / brighness setting of the iPad user.

Pavilion gv laptop colors on monitor color problem

I'm having color problems on my laptop. While the colors on my screen aren't terrible,most of the color/textures appear washed out and muted in comparison to other laptops I own. I've tried adjusting the brightness and calibrating the colors but it didn't fix the problem. I'm not sure what the problem could be. Thank you for your help.

Hey @crawford810 ,
Welcome to the HP Forums!
I understand the colours on your notebook look muted.
Could you please tell me which notebook model you have and the installed operating system? For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number? To see which version of Windows you are using click here: Which Windows operating system am I running?
For an issue like this you will want to test an external monitor to see if the issue is coming from the display, the GPU, or from Windows.
You will want to make sure your GPU and BIOS are up to date. You can download the most recent drivers and BIOS at the HP - Drivers & Downloads website.
I look forward to your reply!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Photoshop - Motion - DVDSP Color Problem

This message is crossposted in the Motion Forum because I'm not sure where the solution is to be found...
I'm putting together a dvd and I wanted to create transition animations to go between the menus. I've run into a bit of a color problem, however. To explain:
I created my main menu as a layered photoshop document (8-bit RGB, NTSC colorspace). I brought that menu into Motion, preserving all layers. I animated those layers in motion so that at the end of the animation they were another menu on the dvd, then I exported the last frame of the animation, brought it back into photoshop, and made everything line up so that it precisely matched the final frame of the animation, then saved that PSD as a new layered document. Finally, in DVD Studio Pro, I brought in the two Menu PSDs and the animated transition.
The problem I'm running into is that the color on the transition animation is washed out and somewhat desaturated compared to the menu PSDs. Rather than the seamless transition from layered menu PSD to animation and back to layered menu PSD, you can see this altered color "pop" on the animation.
Here's what I've checked and tried:
-I've exported the motion project as every codec that made any kind of sense (Animation NTSC, Apple Pro Video NTSC, etc).
-I've brought the Motion project directly into DVD Studio Pro, rather than exporting it.
-Using the color inspector in both Photoshop and Motion, I can see that all RGB values match exactly as they should.
-When I exported a frame of the animation and brought it back into Photoshop to create the second layered menu, the color matched exactly. In fact, I did the alignment using the "difference" layer mode, and there was no color shift at all.
So... any ideas?
Also: I'm going from these layered menus to a video track (first frame matches the layered menu) to another layered menu (matching the final frame of the video track)... that is the most sensible way to have animated transitions between menus, right?
Thanks in advance for any insights.
-W

Well, I found a solution... DVDSP didn't like the image in NTSC, but it seems to work with Generic RGB, provided I redo all of the animation from scratch using the same Generic RGB PSDs. A bit of a pain, but I suppose that's why I did this test after completing only one of the many animations the project will demand.
Thanks everyone for the insights.

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Hi,
What is the exact name of the desktop app you have? Is it "Acrobat Reader DC", "Acrobat Pro DC" or "Acrobat Standard DC"?
(Previously, your question was posted to the wrong forum - the Reader/Acrobat DC mobile forum.)
If you have the paid product ("Acrobat Pro DC" or "Acrobat Standard DC"), you can contact Adobe Customer Care.
Contact Customer Care
If you have the free product ("Acrobat Reader DC"), Adobe Customer Care will redirect you to the user forum like this one. You just need to wait for someone (who is an experienced user but not necessarily an Adobe employee) to answer your question in the right user forum.
You may also try looking for answers for the same or similar problems by Google search.

Hyperlink color

Is ther a way to change the hyperlink color? I created a new hyperlink style but when I enable the hyperlink, it pops back to the orinal color (red!).
Please help.

See that topic in iBA Tips and Tricks 01

Hyperlink color doesn't change when hovering over link

I create hyperlink, color I select for hovering over link works fine. But sometimes when I publish to my website the link color does not change, but the link works ok. I go back to my mac and check, sure enough the color changes just fine. I wipe out the link and reinsert new one. Works fine on the mac, but when I publish, color does not change when hovering. Help.

Welcome to the discussions. This is a long shot, but try clearing your browser's cache and reloading the page — then see if the color changes when hovering. ( In Safari, click on the Safari menu and choose +Empty Cache...+ )

New Hyperlink Color

I am having trouble changing a hyperlink color.
My default is red and I wwant it to be blue.
I create a new hyperlink, modify the font, size, and color as I want.
I "Create Character Style From Selection".
When I use Link Inspector - Enable as a hyperlink - email, it changes font and size, but not color.
The default red is always used.
This happens if I make the text a link first or if I make the changes first and then make it a link.
What am I doing wrong?
Default: My Hyperlink
Desire: My Hyperlink
Muchas Gracias

Here is how a new Hyperlink 2 looks on my iMac in iBooks Author:
The Character Style is blue, but the text stays red. And here it is on my iPad:
Hard to see, but it is in blue as it should be.
So why do my efforst to modify show up correctly on the Mac?

Epson 2200 Color problem solved...I think

I have read the posts on the color problems with 10.6 and the EP 2200. I too had the same issues after installing 10.6 this evening. After much teeth grinding and some choice words I set about solving my printing problem.
The Gutenprint driver has the same problems GIMP had. It isn't really printer specific, as in all the options you once had. I would rather have no driver than have this lame piece of software automatically installed. Gutenprint will make the printer run but that's about all it will do.
The solution is pretty easy:
1. Open System Preferences. Click on Print and Fax
2. Select the 2200 (or any printer giving you fits) and click the to delete the printer. Close prefs.
3. Go to the Epson site and download the 10.4 driver, Epson 11832. Install.
4. Also download the 10.6 updater and install.
5. Open System Prefs>Print and Fax again.
6. Click the and select the printer model, in my case Epson 2200.
7. In the drop down window Select Epson SP 2200 not the Epson Stylus Photo 2200 - Gutenprint v5.2.3! The latter being a Jack of all Trades and Master of none.
8. All the print functions reappear as expected.
Do I believe the reports of Epson dumping on the Mac market? Not a chance. Mac has the majority (well over 50% and growing) of the graphic and creative arts market. Most professional photographers I know use the Mac platform and are very enthusiastic about it. Epson couldn't afford to turn their backs on the Mac platform.
With 10.6 I did loose all my custom icc profiles from PS but not PS Lightroom. I also lost the custom monitor profile. I will re-profile my paper/ink/scanner/monitor and consider it a light hit. I'm sure I don't know why this update was so rough on the drivers. I'm also sure that there will be other pains I have yet to discover.
Is 10.6 crap? Probably not. Will I install 10.7 when it arrives? You bet! At OSX worst it is better than Gate's best!!

This is all good info, but for me at least, the real issue is not whether you can get the driver/printer to function (most people seem to be able to get it working) but when you get it functioning under Snow Leopard are there color issues.
Although the printer may work fine for basic documents etc, it is for color-critical photo work that I need my 2200. Many other posts are reporting that although the driver is functioning, there are fairly severe color issues when trying to create high-quality photographic prints using the standard color-managed workflow. This would be rather crippling for photographers and other artists who rely on their 2200.
Maybe those posting here could comment on whether they have been using their 2200 for photographic purposes and whether or not they have seen color issues. I wonder if some people just aren't noticing a problem because they aren't doing color-managed photographic work.
I haven't installed Snow Leopard yet and I'm trying to determine if this is affecting a very small percentage of people or if everyone is having trouble getting proper color from their 2200 since Snow Leopard. So far I haven't seen a single post specifically stating that they they are using the 2200 for high quality photo printing and have had no color issues under Snow Leopard.
Message was edited by: Bazzography

Color problem, black 'noise' on specific colors

Dear adobe users,
At the moment I have a problem with a few specific colors within photoshop CS6, on top of my original colors you'll see a black noise effect. Some effect you'll suspect when you've turned on a different color mode. But i'm working with the normal RGB/8 color modes which shouldn't be a problem. If i save this document to a JPEG and open it with Windows Preview, the color problems dissapear. Funny thing is, if I get my color picker and hover on a black spot on my original document, the right color shows up in my color picker and not the black color I see on my screen.
What can cause this problem? Tried google to find the problem, but no luck so far. Driving me crazy as this isnt really working for me. Thanks for the help so far!
Printscreen of my problem:
Original document (jpeg):
Regards
Marcel

I'm guessing you have an ATI video card and have updated to Catalyst 13.1 (or gotten the WHQL driver through Windows Update).
Catalyst 13.1 has a problem properly running Photoshop CS6's GPU-based Adobe Color Engine. Basically if the red channel reaches 0, all color will be blacked out.
A workaround that retains most of your GPU functionality but avoids the problem is this: Change the Drawing Mode to Basic in the Advanced Photoshop GPU preferences. Restart Photoshop after making the change.
A possibly more acceptable workaround is to completely uninstall Catalyst 13.1, then seek out Catalyst 12.8, specifically, on Adobe's web site. 12.8 works quite well in Advanced mode.
-Noel

Hyperlink Color Problem

Similar Messages

Maybe you are looking for