Hyperlink Report in Webi

Hi Guys,
I am facing some prblm when i create hyperlink at particular column then measures column is automatically change with #####.I don't know where i m doing wrong.
Second thing after creating hyperlink report i m not able to pass prompt value from one report to other report.When i pass prompt value then it shows some error like 'MDX.measures' in second report.
Kindly help me ASAP.
Thanks & Regards

Hi,
Are you saying that you're still seeing #UNAVAILABLE even after setting the aggregation for your measure to SUM in the universe? Are you sure? You need to set the aggregation function on the Properties tab for the measure.
Remember that ##### is not an error, it only means your column isn't wide enough.
Are you trying to pass a measure to a prompt, or a dimension?
Whenever you're having trouble with passing prompts via a hyperlink, first you must forget about the source report and try and launch the destination report just by pasting the URL into IE. Once you've got that right, then try making that hyperlink in a Webi report.

Similar Messages

BI Reports in Web Dynpro iView

Hi Experts,
I need a favour from you in estimating small requirement with BI reports & Web Dynpro iView.
My first query, is it possible to build horizontal drilldown menus
Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.
If all the above are possible, I have a requirement that should fulfil the below
In a portl iView, I have several BI Reports displays based on called report. But at the moment links to the report are in simple hyper link. Instead of hyperlinks, I want a horizontal menus as hierarchical/child structure. To acomplish this I chose, Web Dynpro as the best solution.
I have some development exeperience in Web Dynpro, but never encounterd such a requirement.
If any one can help me out in estimation, posibilites of the solution that would be a great help for me.
Your help will be highly appreciated.
Thanks in Advance,
Chinna.

Hi Chinna,
Check the following threads:
Show BI report in a Web Dynpro App
BI data in Web Dynpro
Re: How to create a Report from WebDympro
Re: BW server details from webdynpro
/community [original link is broken]://Bi,Portal Webdynpro
And a How To Guide:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
*Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.*
You can not assign two types of app in a single iview but you can have multiple iviews assigned to a page.
This will guide you.
Regards.
Rajat

Button of report in WEB UI Client not working.

Dear experts!
I program a report in SAP GUI. Display data by ALV grid using function module. Then, i create a button, when i click this button, program will call a function module to export data to excel. I fix the path to save file excel is on my local computer. I test in SAP GUI, these functions run very good. I create logical link to bring this report to WEB UI. But after i run this report, i click button to export data to excel, system has not any message and i follow the path i have fixed about, but i do not find the file excel.
Anyone can explain and resolve this problem with me?
Thanks a lot!
Longndtb.

Hi,
GUI methods for file handling do not work in the web session. The browser by itself has no access to the user's PC and this is on purpose for security reasons. You have options. You can create a SICF node to generate the report as a downloadable content or use activex objects to directly write files in user's PC or run a SAP GUI report in a background session.
Regards,
Arun Prakash

Double Click in ALV Report in Web dynpro ABAP4

Hi All,
I am very much new to WDA4 , can anybody plz guide me how to enable double click in ALV Report in Web dynpro ..
Plz help it is urgent .....
Thnks
Sahil

Hi All,
I am very much new to WDA4 , can anybody plz guide me how to enable double click in ALV Report in Web dynpro ..
Plz help it is urgent .....
Thnks
Sahil

How to display "No data for yesterday" in a scheduled report on Webi

Hi All,
In Webi, I am working on scheduling reports and was asked by a user if the scheduled report on Webi can display "No data for yesterday/no orders for yesterday" when the report returns no data due to No Orders submitted or a business holiday. This sounded a good idea to me as this report only looks for previous days orders/sales and there are many instances when the report will return blank page due to no activity the day before.
Can anyone please guide me on the possibility of achieving something like this on Webi using Bex query.
Any help will be appreciated .
Thanks
Gaurav

Hi,
You can format the blocks in the report as "Hide When Empty" or "Hide When [some formula]" and have a blank cell added behind these blocks with a text "No Data for Yesterday"
Need to set the relative position and ordering for this accordingly.

Running Report in Web Pl/Sql

Hi All!!
Which commond should i use to run the Report from Web PL/Sql of
Designer?
Thanx
Pritam

Hi,
I am not BOBJ Admin so I don't have on the top of my head that how to do but here two links which might help you.
[http://blog.mastering-sap-and-businessobjects.com/]
[http://www.forumtopics.com/busobj/viewtopic.php?p=165424]
Regards,
Bashir Awan

Can not display BI report in Web ui

I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
How does the the connection between BI and crm works?
Please advise

Hi Experts,
We are using Webiu 2007 with BI 7.
We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM. I have done the following steps in CRM
1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
2) Assigned this reporting profile to business role
3) I selected My-Top-5 quotation report and gave the BI system in display bi reports
4) I can see the report on webui.
Problem: When I selected the report, a logon pad appears and I enter RWT user id and password, it's doing nothing. But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word. But, we can logon to GUI RWT.
We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys.
1) I created the report with object key and type as one for 3.x template and one for 3.x query view
2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
3) When I select any of these, it taking to a blank screen without any logon screen.
BW team says that these reports are running with data in their system.
Can someone please help?

Unable to open reports with Web intelligence

Hi there,
We are unable to open reports using Webi Intelligence. Error of "Session is closed(Error: INF)" apears.
I have restarted the SIA and Apache services with no luck.
Version : Business Objects XI3, Edge Series professional
Kind regards,

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

Unable to open reports and web analysis document in workspace

After installing reports and analysis 9.3.1, when I am trying to preview a test report on web or as a pdf preview I am getting these kind of errors.
<BR><BR>
Required application module analyzer.reportview is not configured. Please contact your administrator.
<BR><BR>
When I click OK on this it says communication error which says <BR><BR>
"http://hyprepdev.acml.com:19000/WebAnalysis/conf/AnalyzerConfig.xml?LOCALE_LANGUAGE=en <H1>SRVE0255E: A WebGroup/Virtual Host to handle /WebAnalysis/conf/AnalyzerConfig.xml has not been defined.</H1><BR><H3>SRVE0255E: A WebGroup/Virtual Host to handle hyprepdev.acml.com:19000 has not been defined.</H3><BR><I>IBM WebSphere Application Server</I>"
<BR><BR><BR><BR>
Similarly when I try to open as pdf preview I am getting the same error.<BR>
Kindly advice.

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

Issue while generating report using web.show_document with https

Hi All,
I am facing some issue while seeing the report using web.show_document as shown below:
https://ucrmskr.apac.nsroot.net:10301/forms/html/001725032_gca.rtf_
In this case the report opens directly without asking for me to save or open or cancel option
whereas if I hit
http://scrmskr.apac.nsroot.net:7801/forms/html/001725032_gca.rtf_
it asks for save or open or cancel option
so that I can save the report to my machine and open in wordpad format
The report generated in the first case is not coming in proper format
Below are my forms.conf mappings:
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/ucrmap1/weblogic/bea/ucrms/config/FormsComponent/forms/html/$1"
RewriteRule ^/ucrms/icons/(..*) "/workaroundicons/$1" [PT]
AliasMatch ^/workaroundicons/(..*) "/ucrmap1/weblogic/bea/ORA_PFRD/forms/java/$1"
RewriteRule ^/forms/help/(..*) "/workaroundhelp/$1" [PT]
AliasMatch ^/workaroundhelp/(..*) "/ucrmap1/ucrrgbg2/help/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicCluster kauh0079:9001
DynamicServerList OFF
</Location>
Please let me know what needs to be done additionally if we are trying to hit https because in the second case we were hitting http with similar mapping in diff environment and it was generating report successfully.
Regards,
Harish

Thanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas?

Unable to print crystal report over web using ActiveX Control

Post Author: jimmyp
CA Forum: General
We have a problem with printing crystal report over web using ActiveX Control. When clicking print button, it only shows a blank dialog web crystal viewer page without any error. The page just simply hangs. We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE. It still does not print. Does anyone know why?
Environment.
Bundle Crystal Report v10
Asp.net 2.0
IE 6.0 or higher.
Appreciate for your help.
Jimmy

Post Author: Ian Kulmatycki
CA Forum: General
A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
-ian
When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
"A communication error occurred, printing will be stopped."
How can this error message be resolved?
Resolution
This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
This issue is addressed in the following components (and later versions):
PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
WebReporting.dll, version 10.0.5.785, dated 8/25/2004

Report on web

how to upload report on web?
explain me procedure

Hi
1.It can be directly executed from Bex Designer by using the display in web option.
2. You can create web templates and assign the reports in the web items and you can display it.
Regards
M.A

How to cancel a report from web?

i want to cancel some reports i have made from web.
i have made two kinds of reports,one from web using /cgi-
bin/rwcgi60.exe?runrep... and another from DOS command line
using rwcli60.exe.Then i use /cgi-bin/rwcgi60.exe/showjobs?
server=myreportserver and the web shows all the report jobs.
i can kill report jobs from the web while clicking on the
coloum 'job status',but i can't cancel all the jobs.that is to
say i can cancel the jobs made from rwcgi60.exe?runrep... and
cant cancel the jobs made from Dos because i have no privileges
and the two kinds of reports belong to different owners.
i can cancel them all from report queue manager using
ADMINISTRATOR,but i must made the two kinds of report from web
and dos and must cancel them all from web.
anybody can help me how to solve the problem?
another question:can i assign the report's owner to a special
personal while using rwcgi.exe and rwcli60.exe?
thanks in advance!

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

Browser Time out in Reports (using WEB.SHOW_DOCUMENT to call reports)

When running a big report which takes a long time to run, it finishes on the report server but in the browser the screen is stuck at the parameter form, you don't see the report output. It's as if the browser has timedout. Is there a solution to this?
I am running reports using WEB.SHOW_DOCUMENT only - through a URL. This seems to be a huge drawback of using this method.

Is the browser launching?
If it is have you tried a show source on the browser window?
Sometimes if you open an XML file in a browser you get a blank page but the XML is there. Something to do with the XML format I think. I'm no expert on XML just a behaviour I have observed.

How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000

Post Author: ltkin
CA Forum: WebIntelligence Reporting
Hi,
How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000 ?
Regards,

Hi ltkin,
Unfortunately, it is not possible in Xir2 to create Webi reports from stored procedures.
Webi reports can only be created from Universe. So in Business Objects XIR3 we can create a special universe that enables Web Intelligence user's to access stored procedures residing in the database. This is the only way that Web Intelligence user's can access stored procedures.
Please let me know if the above information helps.
Regards,
Pavan

Hyperlink Report in Webi

Similar Messages

Maybe you are looking for