Hyperlink to open in NEW window

Help Please!
I have made a form in which I have some hyperlinks and when they are clicked on they open in the same window.  Then when someone goes back to the form they have lost all their work.  How do I set the hyperlink to open in a different window or tab or something?
Thank you!

http://forums.adobe.com/message/1342425

Similar Messages

  • When I try to follow a hyperlink, Firefox opens a new window that stays blank.; also I can't download a hyperlinked file.

    I recently bought a laptop that is equipped with Windows 7. I needed new drivers for my Canon printer and was able to locate the new software on their website. When I tried to activate the hyperlink, Firefox opened a new window with the proper address in the "window". however the window stayed blenk. Similar actions with IE yielded desired results.
    I got the same "dead end" when I tried to download a form from Mozilla; again IE worked fine.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • Does any version of InDesign let you set hyperlinks to open in new window?

    I'm converting some InDesign books to pdf and epubs and my client wants the hyperlinks to open in new window when these files are viewed in browsers. so far no version I've tried has this capability.

    It must be done in Acrobat. Ask in the Acrobat forums.

  • Hyperlink to open in new window on clicking via crystal client

    Hi,
    How to call hyperlink in new window via crystal client.
    I have main report. In that ,for two-three columns, I have made the hyperlink and I want that when user click on that column, it should open in new window.
    But I am unable to open the below link in new window.
    Hyperlink code :
    'http://epint1ent1.jpmorganchase.com/vps/docViewer?invoiceIndexKey='
    &columnname
    I am using crystal client XI R2.
    Please let me know any solution.
    Thanks in advance

    Vishal,
    In your Hyperlink add in the parameter for
    sWindow=New
    i.e. 'http://epint1ent1.jpmorganchase.com/vps/docViewer?sWindow=New&invoiceIndexKey='.....
    You obviously need to complete the Hyperlink fully.
    This should do the trick

  • Hyperlinks to open in new window?

    I'm trying to set my external hyperlinks to open in a new
    (browser) window but haven't had any luck. I thought that the
    "Display in Browser" option when setting up the HTML Jump would do
    this, but it still opens within the help window. Can anyone provide
    instructions on how this can be done in RH for Word v7? Thanks in
    advance...

    How does one use "target=blank" in the FrameMaker 11 hypertext marker syntax?  I currently have a Hypertext tag, with the following contents:
    message URL http://www.mylink.com target=blank
    When I import this to RoboHelp 10 and generate HTML Help, I get a link of "http://www.mylink.com%20target=blank", which obviously isn't right!
    Mind you, will target=blank even work in the standard Microsoft HTML Help viewer anyway?

  • Creating Hyperlinks that open a new window

    Hi,
    I'm creating a website for an art group I belong to.
    On the member's gallery page  - here - I have each artists name and a link to a website if they have one. I would like the link to open the site in a new window rather than directing the visitor away from the site (leave our site open in a window behind)  But I don't see an option for that when I make the hyperlink. Is this possible?   Or is this something that the development team should consider in future updates?
    Thanks,
    Elaine

    Hi Elaine
    You can enable the option for opening the page in new tab or page.
    Thanks,
    Sanjit

  • Globally change hyperlinks to open in new window

    Hi
    I have imported a huge FrameMaker book which has about 30 hyperlinks to URLs spread across multiple topics.
    So, is there a way I can globally configure all URLs to open in a new window after importing the book into RH? I did not use "_targe=blank" in FM hypertext as it was resulting in some formatting error whenever hyperlinks appeared with a custom FM Style.
    I am using FM11 with RH10.
    Sreekanth

    How does one use "target=blank" in the FrameMaker 11 hypertext marker syntax?  I currently have a Hypertext tag, with the following contents:
    message URL http://www.mylink.com target=blank
    When I import this to RoboHelp 10 and generate HTML Help, I get a link of "http://www.mylink.com%20target=blank", which obviously isn't right!
    Mind you, will target=blank even work in the standard Microsoft HTML Help viewer anyway?

  • Hyperlink target - open on new window

    Hello people
    I edited one field's hyperlink property to point to an asp page. As I run this report into the internet, I want to open the page on a new browser window. In html I could simply add target="_blank" option, but I don't know how to do this in Crystal Reports.
    Can anybody help me?
    thanks
    Fabio

    Thanks to [this|DBMGui Information about old non existent databases|forums.sun.com] Sun forum topic, I changed my asp page and now it works fine:
    instead of:
    Dim objViewer
    Set objViewer = CreateObject("CrystalReports.CrystalReportViewer")
    objViewer.ProcessHttpRequest Request,Response,Session
    now it is:
    Dim objViewer
    Set objViewer = CreateObject("CrystalReports.CrystalReportViewer")
    dim lstrHTML
    lstrHTML = objViewer.GetHtmlContent(Request, Response, Session)
    lstrHTML = Replace(lstrHTML, "target=""_self""", "")
    lstrHTML = Replace(lstrHTML, "sWindow=New""", "sWindow=New"" target=""_blank""")
    Response.Write(lstrHTML)
    tks
    Fabio

  • Word hyperlinks converted to PDF-open in new window???

    I currently use Word 2007 to build indexes with hyperlinks and convert to PDF using Adobe Professional 9. I know how to set my Adobe preferences so that hyperlinks open in a new window, but I want to set this on the document level for each index I create. I also know how to set each link within the final pdf to open in a new window (if I go through each and every link preference).  I must create the hyperlinks in Word as there are many instances that my indexes change prior to distribution of the discs and I don't like having to duplicate, triplicate, etc. my linking process in Adobe as some of my indexes contain 300+ links. I only know of JavaScript but not enough to use with confidence...  I want the hyperlinks to open in new windows (as that has always been my instructions to the end user) without the end user having to fumble around with their systems and settings. It has just been brought to my attention that my discs do not have that function set. Meaning, that what I view and test on my system is not the same as the end user. The hyperlinks open in the same window (dang it!!). I did see a JavaScript solution but keep getting an error (on line 2). Here is the JavaScript I found in the forum: app.openInPlace = false;   //Opens cross-document links in separate windows.
    So, I have muliple questions...
    Is this sript the best way to accomplish the document level open in a new window function?
    Is this script written correctly? (I did cut and paste this script within the brackets)
    If I use the JavaScript and save, does that save in the Adobe application system or just on the document level?  And then how do I delete if it doesn't work properly?
    What other functions can you suggest I try?
    Any suggestions would be helpful!

    Where did you place that script, exactly?
    It should work, there's probably just an error in how you added the text of the script. Try removing the comment so that there's only one line of code:
    app.openInPlace = true;
    Note that this changes the user preference, which is generally frowned upon, so you should endeavor to set it back to what it was in the first place when the document is closed. This would involve storing the value of this property when the document opens, change it if necessary, and restore it when the document closes. It also won't work for those users who have JavaScript disabled.
    Unfortunately, link annotations are difficult to alter in an automated way given what's available in Acrobat. It would be possible with an Acrobat plug-in to make document-wide changes to all of the links, but I'm not aware of any that do this. You might want to search around.

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • External Hyperlinks open in new window.

    When someone in my iWeb site clicks an external Hyperlink they automatically leave my site. How can I make Hyperlinks open a new window so my site is not effected?

    Have a look at this picture here
    http://alyeska.altervista.org/inspectornewpage.jpg
    Isn't that how your inspector looks like?
    Regards,
    Cédric

  • Firefox 6 ,Hyperlink not opening when I select Open In New Tab, it always Open In New Windows.

    I have just upgrade to Firefox 6 and I having problems opening Hyperlink when I select Open In New Tab, it always Open In New Windows. It will work when I open another copy of Firefox browser but not on my main browser. Any suggestions to fix this ?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How to Set Individual Managed Metadata Navigation Links to Open in New Window?

    I am using a managed metadata term set for the global navigation in my client's site. Most of the global navigation links point to pages in the current site, and should open in the current browser window/tab as the end user is just navigating within the
    site content. However, I have one particular node in the navigation term set that points to related content scattered around other external sites. The client wants these links to open a new window.
    Unfortunately, I can't seem to set the target for navigation links in the term set. If I was using standard global navigation, I'd be able to select the "Open in new window" checkbox when setting up the link, but that option doesn't appear to be
    supported via MMD navigation.
    Any clever suggestions?
    Thanks!

    I had a similarish requirement at a client once upon a time, they wanted any links that went outside of the intranet web applications to open in a new window.
    The way we managed that was to use jQuery to overwrite the standard hyperlink references for any hrefs that didn't point to internal sites to use the same javascript functions that SharePoint used for links configured to open in a new window. It worked out
    as being about half a dozen lines; check the URL and if it doesn't begin with a set range of options then overwrite the on click behaviour using standard jQuery behaviour.
    If you want it site wide then you just add jQuery and the code snippet to the master page, if you just want it in some places then add a CEWP or a HTML form web part to the relevant pages.

  • Opening a New Window in SJSC

    Hi all,
    I have a slight problem here, inside my table I have a hyperlink, based on the records retrieved, this hyperlink will have different URLs. In the button_action() I have the following code:
    getHyperlink().setTarget("_blank");
    switch(type) {
            case Constants.TYPE_1:
                getHyperlink().setUrl("/faces/Page1.jsp");
                break;
            case Constants.TYPE_2:
                getHyperlink().setUrl("/faces/Page2.jsp");
                break;
            case Constants._TYPE_3:
                getHyperlink().setUrl("/faces/Page3.jsp");
                break;
            default:
                 logger.error("submit_action|Type invalid!");
    public String hyperlink_action() {
        //Add get row table here
        getRequestBean().setRequestObject(rowData);
        return null;
    }I need to pass the table row where the link is clicked into the RequestBean and open a new window to display some information but because the action() is not executed I cannot pass in any information at all.
    1) The problem is that because the URL is preset before the table is populated, when I specified a hyperlink_action() to be set as the action when the link is clicked, the method is not called. The new window page is opened directly. I cannot populate any JSF components as the action() method is not called to extract the row details and put into the request bean.
    2) If I place the .setURL() codes in the action method, the window created will contain the exact page as the parent window. The desired page will not be loaded.
    I'm now stuck. Would appreciate it if anybody can guide me in the right way of getting the new window populated with the results.
    regards,
    Michael

    If you want to open a new window besides your original window, then you have to do it with javascript. Put a code similar like this in your onClik property of your hyperlink:
    window.open("faces/Page1.jsp", "","toolbar=0,scrollbars=0,location=0,statusbar=0,menubar=0,resizable=0,width=400,height=450");
    return false;When you click the hyperlink, it will open a second window of Page1.jsp. You can use if-else construct in javascript to choose which page you want to show.
    If you want to pass a value to the second window, you can use query string like this:
    window.open("faces/Page1.jsp?par1=value1", "","toolbar=0,scrollbars=0,location=0,statusbar=0,menubar=0,resizable=0,width=400,height=450");
    return false;Passing a field value in table component to second window:
    window.open("faces/Page1.jsp?par1=#{currentRow.value['FIELDNAME']}", "","toolbar=0,scrollbars=0,location=0,statusbar=0,menubar=0,resizable=0,width=400,height=450");
    return false;To retrieve the parameter in the second page (in this case Page1.jsp), put this in init():
    javax.servlet.http.HttpServletRequest req = (javax.servlet.http.HttpServletRequest) getExternalContext().getRequest();
            String par1 = req.getParameter("par1");After getting the parameter value, you can do the rest as your normal page, ie populating the page the way you like.
    AFAIK, the only way to open a new window is through javascript only. CMIIW.
    Hope that helps.

  • SRW.SET_HYPERLINK - Handle SPACE in filename AND open in NEW WINDOW

    Report 10g (10.1.2.3.0 - 32bit on Windows 7 64bit)
    Issue #1:
    using srw.set_hyperlink to get a handle on *.pdf file on remote server. Report is launched as PDF. PDF that is opened via the URL launches in same window as report. I need run report as PDF, click hyperlink to get handle on another file which should launch in New Window.
    SRW.SET_HYPERLINKATTR only useful with HTML and HTMLCSS. Javascript? If so, sample code?
    Issue #2:
    possible that file retrieved will have spaces in its name. Hyperlink defaults %20 in the spaces of the name, but the link does not successfully retrieve file. Tried replacing spaces w/ %20, but like defaults does not retrieve document; due to actual file name not having the %20 in its actual name. Is there are way to account for the spaces in the URL then "remove" them to find the correct file and open in new window?
    Tried using virtual path as well as physical path.
    Help with either or both issues is truly appreciated,
    Thanks!!

    Hello,
    When you set the property "Hyperlink", the property "Additionnal Hyperlink Attributes (HTML)" is displayed. Set this property to :
    target="_blank"
    Regards

Maybe you are looking for

  • Windows 7 installation issues (0x8007005)

    I recently added a SSD in the optical bay of my unibody macbook pro and am currently trying to install a fresh copy of Windows 7 Ultimate x64 on it. If I go to run the installer from my Windows 7 installation on my disk drive through the optical driv

  • Toshiba External Hard Drive not recognized by computer. Please help!

    I was wondering if anyone could help me. I have an external hard drive and it will not show up in "My computer" when I plug it in. I have tried other USB drives and other computers. I am starting to think it is a hardware issue but I don't want to lo

  • Error message when installing software on my HP Laserjet 1536dnf MFP

    I am trying to install the software on my HP computer for my HP laserjet. I have tried manually and using the assistant.The software getsto 87% installed then gives a fatal error occurred preventing product use.  Click cancel tp cancel install. none

  • Apple's PDF Maker

    I've run into a problem creating PDFs out of Quark 6.52 and 7.0 probably due to an image or a font being used. In desperation to provide a PDF for a client I have used "Save As PDF" in the print dialog to make a PDF. My question is: Can I alter that

  • Time series analysis in Numbers

    Has anyone done any chart showing time series analysis in Numbers? I could not find a way to change the axis to reflect the right data series.