Hyperlink to slides within Keynote not working on iPad!

I have created a KeyNote presentation, and work on it between my MacBook and my iPad (via iCloud). However, I cannot use hyperlinks to slides within the same presentation!  They show as being linked when I go into the settings, and I have deleted and recreated them (on my iPad), using the hyperlink feature, and it just does not "take."   I am able to hyperlink to web pages, oddly, but not slides within its own presentation. Help!

The link above takes you to the correct page.  However I found you have to go to "presentation tools" not "advanced" under "tools". I was able to add a link to a specific slide (the link was there on my mac, but not on the iPad).  It worked as it is supposed to.  I also tested a link I had for a website and that link worked right away.
Hope this helps.
Helga

Similar Messages

  • Numbers, Pages & Keynote not working on iPad

    After the recent update for all iWork apps none of them load now on my iPad 4. They all just show an empty screen in the theme of the app (see pic attached)
    all iWork apps are working fine on my iPhone 6, just not on iPad. Anyone else with this problem? I have tried exiting , restarting, restarting iPad and deleting/reinstalling the apps all with no result.
    also everything is updated.
    thanks
    andy

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Hyperlink that contains backslash is not working in Acrobat Reader 8 and 9

    Hi,
    Does anyone know why a hyperlink that contains backslash is not working in Acrobat reader 8 and 9?
    I created a document in Indesign CS and it contains hyperlinks that open up files from network drive so they contain backslash (for example: c:\foder\forder\filename.jpg). All the hyperlinks work in Acrobat Reader 6 but not in Acrobat Reader 8 or 9.
    Anybody could share the solution would be very much appreciated. Thanks!

    Did you ever figure this out? I am also having problems with the "No Hand" javascript which turns off the (not very helpful) page-forward hand icon (a hand symbol with a down arrow) which confuses our users when in fullscreen mode. We create interactive PDFs and everything worked fine up to Acrobat X/Reader X. Now in XI it doesn't allow the internal link icon (pointing finger) nor weblink icon (pointing finger with W) to appear. It just remains a plain o’ hand icon no matter what you mouse over even though there are links present.

  • Hyperlink with tracking applied does not work in PDF

    We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.

    Peter,
    We'll look into that. We already do two separate PDFs for print and web, but
    we are distilling both right now. Wouldn't be too much of a problem to
    change to exporting the web version I don't think.
    I did a test, just curious, is there a way to keep it from putting a black
    box around the link on the PDF?
    Thanks for your help! We appreciate it!
    Beth
    From: Peter Spier <[email protected]>
    Reply-To: <[email protected]>
    Date: Fri, 14 May 2010 13:24:04 -0600
    To: Beth Phillips <[email protected]>
    Subject: Hyperlink with tracking applied does not work in PDF
    Distilled PDF uses Postscript which does not support hyperlinks and
    interactivity. To make your hyperlinks in ID you'll need to export and check
    the Include Hyperlinks and Include Interactiviity boxes.
    Your printer doesn't need hyperlinks because they don't work on a printed
    page. The requirements for print and interactive PDF are quite different, and
    you may find you need to make two versions.
    >

  • HT4061 iphone 3GS screen locked, slide bar does not work

    Iphone 3GS. The slide bar does not work, ie the screen lock does not unlock. I have tried to reset (power and home buttons) and also to restore my iphone several times using iTunes without any success. Any suggestions? My son uses the phone now for games, so it has no carrier.

    A reset can be done by tapping and holding the Home button and the Sleep/On/Off buttons at the same time for approximately 10-15 seconds, until the Apple logo reappears.
    Stedman

  • HT201406 i'm having to double click everything & the slide feature is not working.  What's the problem?

    i'm having to double click everything & the slide feature is not working.  What's the problem?  Resetting fixes it for a couple seconds then it goes right back. 
    i.e. If I go to open my mailbox, i have to 1st select the icon. then double tap it to open.  same thing once I get to an email.

    At a guess, turn off VoiceOver:   Settings > General > Accessibility > VoiceOver.  Use three fingers to scroll.

  • HT1695 Slide button will not work to turn on the wifi?

    I cannot connect to wifi which I need to back up my phone as the slide button will not work on this setting only

    Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new.  Try each of these in order until the problem is resolved.  If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation.  Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
    Best
    GDG

  • Pages numbers and keynotes not working on handoff, but everything else is?

    Pages numbers and keynotes not working on handoff, but everything else is, map, mail etc. Am I alone?

    Really appreciate your help with this. I am a bit of a novice here.. but.. After some more searching on this issue I notice your comments (cut/pasted  below)  with respect to this router and bridging mode. You mentioned that I should update my firmware on this router and that this would (if I am interpreting your reply correctly) facilitate my LAN to LAN connection and of course using this router simply as an access point and more to the point -  having the use of the guest network. So my question is even if I did update firmware,  seems I would still require 3rd party software to make this work? (re your last sentence in your comments below)  Just need to understand the process and determine whether or not it is worth it (or maybe I should upgrade the router) but I don't want to change the configs of the network wired router at this time... and need to use the E2500 or facsimile as  simply an access point with  guest network functionality,  Thanks much appreciated.
    "Again: some E series routers already support wired bridging in firmware, i.e. to use the router as simple access point.
    This is and was always possible using a LAN-LAN setup instead.
    The problem with the LAN-LAN setup is, however, that you have some limitations accessing the network storage or network printer, e.g. the router doesn't have the correct time and you cannot access the storage from remote using port forwarding through your main router.
    These limitations have been overcome with the wired bridge mode (internet connection type = bridge mode).
    But again: this has absolutely nothing to do with wireless bridging. That's something completely different and is not supported on Linksys routers in any firmware version so far. To do wireless bridging (i.e. the Linksys routers connects wirelessly to another main router) you need 3rd party firmware."

  • Ipad screen is locked.  SLIDE function will not work but screen does still rotate.

    ipad screen is locked.  slide function will not work but screen does rotate...

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Iwork is not working on ipad 3

    iwork is not working on ipad 3, it crashes when its opens, it dosent show my files on keynote, numbers and pages content, but i can access the same on my iphone 5 and icloud. even after update on ios 7 on the latest firmware, its still crashing on ipad 3, can you please help me.
    thanks
    JD

    Actually this doesn't explain everything.
    I finally reinstalled Snow Leopard / iWork 09' and then upgraded to Yosemite and everything is working like a charm.
    This issue has something to do with the use of the "Application migration tool" from Mac Os X Yosemite to collect old applications to the new os from another installation...
    I solved my issue this way because I don't have very valuable applications that I want to transfert but for other users, this could be a real issue...
    Thanks a lot for your answer

  • Multi gestures not working on iPad Air ios8 onwards

    Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?

    MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
    ITs it's almost like they don't care
    come on Apple sort this out !! It's been too long

  • Printer not working following iPad uodate

    Printer not working following iPad upgrade

    Hi,
    Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
    Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
    Other things to check would be that there have been no recent changes to the wifi password.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Flash Variable is not working in Ipad

    Hi Experts,
    I'm facing with an issue, could you please suggest me your valuable suggestions.
    I have created Two dashboard (Example names A1 and B1), I need to open the dashboard B1 without asking credentials, when I select an Image in A1.
    To work in such a way, I have created a flash variable and pointed the range to cell J1.
    I have placed a URL button on top of image in Dashboard A1. I have copied following URL in a cell, and this URL I have pointed to URL Button.
    URL= (="../../../Xcelsius/opendoc/documentDownload?iDocID=M1TVABCADjs2AHoAlg123AAgoBpgwAAAA&sIDType=CUID&CELogonToken="&J1)
    Opening B1 dashboard from A1 is working fine in desktop and in Android tab, but it is not working in Ipad. Not working in Ipad in the sense a new browser window is opening with empty page.
    I have tested in another way like, passing opendocID and Flash variable to the URL button, It is working fine in Ipad but asking for the credentials.
    Experts could you please suggest me some solution.
    Ipad is Ipad2 and BO Version is 4.1 SP4.
    Thanks & Regards
    Karthik M

    Hello,
    You hyave to use the special flash variable "CELogonToken"
    Would request you to check http://scn.sap.com/docs/DOC-36362   this is a SCN document
    with title "Step by step way to create parent child dashboard in BI 4.0/4.1 using flash variable".
    SWF loader is not supported for mobile.
    Best regards,
    Mohamed AISSA.

  • IN USING IPAD, ITUNES NOT WORKING ON IPAD 3?

    ITUNES NOT WORKING ON IPAD 3?

    What exactly is the problem?
    The iTunes App on your iPad is a portal to the iTunes Store for music and videos.  It needs a connection to the internet (either WiFi or cellular) to work.
    To play music on your iPad, use the Music App.  To play videos on your iPad, use the Videos App.
    If you need help using your iPad, look at the iPad iOS 5.1 User Guide

  • Letter F not working on iPad

    Letter F not working on iPad 2..have to press real hard to get it working

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

Maybe you are looking for