Hyperlinks - Another Report Object option

I am using Crystal Reports 2008 for my development. I have a requirement to navigate the objects within the report by clicking the text object made into hyperlink. I have tried the Another Report Object option, it is not working. I exported the report to HTML and there the text object is with the link but having a invalid link like "navbookmark...". Please help me to resolve this and implement the requirement as mentioned above

Check the help file on how to format the link

Similar Messages

How to use "Another Report Object" in hyperlink

Hi,
I have a requirement to create a hyperlink which will navigate that link to another page of the same report.
When I click on the option "Another Report Object" I get few fields like Object Name and Data Context?
Does anyone has idea how to do this?
Thanks,
Hetal

Hi Hetal,
This feature works only in the HTML Preview or in InfoView.
Here's what you need to do:
1) Copy the field that would be the target (Right click the field > Copy)
2) Right click the field that would act as the source and select Hyperlink
3) Cick on the Paste button which fills in all the required information
Hope this helps!
-Abhilash

Creating Hyperlink to Another Report in Same Document

Hi
Is it possible to create a hyperlink from a cell in one report, to another report in the same WebI document, that doesn't involve the entire reloading of the document.
Also, I want to be able to pass through a filter value.
The reason for the request is we have a report which list certain information about an article. The 2nd report (still in the same WebI document) lists all sorts of other information about the article. The 2nd report contains a lot of information about the article, which doesn't make sense including in the 1st report.
I can create a hyperlink on the article number, which uses the OpenDoc functionality to reload the report and navigate to the 2nd tab (report). If the article number is provided as a prompt on the query, then the data is filtered according to the selected article. That works, but it is not nice, as the report has to reload, and when you click on the tab to go back to the 1st report, that article prompt has been applied there as well.
To get rid of that last error, we could conceivably create 2 queries, 1 for each of the reports, and only have the article input prompt on the 2nd query ... getting messy though.
I would prefer to pass the article number and have that applied to the filter on the 2nd report ... doesn't seem possible in OpenDoc format though, unless I just can't find the querystring parameter to use.
Is there not a way of linking to the tab, without reloading the whole document?
Cheers,
Andrew

Hi Andrew,
try getting the parameters to be displayed in a cell and use the parameter lsS or lsM(for multiple values) and pass the parameters to report 2 using openDoc.
The document here lists the options with openDoc, might be helpful otherwise
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_opendocument_en.pdf
Thanks,
Rajesh

Calling a Report from another Report.....URGENT

Hi,
I am calling a report from another report using hyperlink. I want that this new report should come in a new page.
Can any body help me where i can set this property, so that the new report will open in a new page.
Thanks in advance
Regards
Kamal

Try to call report from report by a button in the calling report:
1     In the Layout Model view, click in the tool palette. Note
2     Click and drag a rectangle.
3     Double-click the button object to display the Property Palette.
4     Under the Button Label node, set the Label Type property to either Text or Icon:
n     If the button label is text, set the Text property to the text you want to appear on the button.
n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
5     Under the Button Behavior node, set the Type property to PL/SQL.
6     Double-click the PL/SQL Trigger property value field.
7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
8     Set other properties as desired.
9     To activate the button, run the report, then display it in the Runtime Previewer.

How to upload/download screen from one report to another report

Hello experts ,
I have to upload a screen from a report say zrept1 screen 0100 to another report say zrept2 screen 0100.
Please , reply .
regards,
Jeet
Moderator message: standard SE80 functionality for copying objects, please do more research before asking.
Edited by: Thomas Zloch on May 19, 2011 3:14 PM

Hi Anuj,
I have given the function in the prompt message like as you suggested.Next i applied the changes.
Post click on hyperlink still iam facing the same error.
please tell me , Am i doing any thing wrong ?
Regards,
Ram

How to Remove a Report Object from a Category Without Deleting It?

I'm trying to "remove" a report object (in this case a Webi Report) from a Personal Category. However, I've found that when I right-click on the report within the Category and choose "Organize >> Delete", not only does it remove the report from the Category, it also deletes the "source" report from it's original location... not good. (NOTE: If I try this as a user without rights to delete report objects, I don't even get the "Organize >> Delete" option, as would be expected based on the behavior I'm seeing.)
Does anyone know if there is a way to "Remove" report objects from Categories without deleting the report from its original location? The only option I can think of is to simply recreate (copy/paste) the whole category with all of its components (less the undesired report object) and then delete the original Category.
Thank,
Josh
Edited by: Josh Crawford on Sep 9, 2010 9:25 AM

Hi,
This is much easier than it looks like, although it's not intuitive.
For example, when some webi is in a category, categories where the webi is linked are underlined in blue:
If you click in those blue marked categories and click Accept, you're unlinking the webi/report/dashboard from that category:
-->
Hope it helps
Alberto

Deactivate Hyperlinks in reports when it is saved as pdf

Hi,
i have a report designed in 10g, report contains bookmark/url on code(empcode) when clicked call another report for detail info,created the hyperlinks using SRW.SET_HYPERLINK('http://myserver.com/reports/rwservlet?userid=user/user123@mydb&server=rep_myserver&report=d:\myreport.rdf&destype=cache&desformat=pdf'').
The report works fine but the problem is that it is generated in pdf and when the user save pdf copy, the hyperlinks/url are still active i.e the detail report can be called by clicking the code without log in..
- I Want to either deactivate the hyperlinks when user save the report.
- or server prompts for login if the user is not logged in i.e directly accessed the report using browser.
Thnks

Multimedia is not embedded in exported .pdf files.
You will need to relink them again in the .pdf using Adobe Acrobat Pro.
Peter

Calling a report from another report

Hi,
Is there any way ,(any built in ) to call a report from another report in Report Builder 2000 and Report Builder 6i.
Regards

Try to call report from report by a button in the calling report:
1     In the Layout Model view, click in the tool palette. Note
2     Click and drag a rectangle.
3     Double-click the button object to display the Property Palette.
4     Under the Button Label node, set the Label Type property to either Text or Icon:
n     If the button label is text, set the Text property to the text you want to appear on the button.
n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
5     Under the Button Behavior node, set the Type property to PL/SQL.
6     Double-click the PL/SQL Trigger property value field.
7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
8     Set other properties as desired.
9     To activate the button, run the report, then display it in the Runtime Previewer.

Drill through to another report with bins in OBIEE 11g

Hi Everyone,
We have a specific scenario that is as follows:
Bar chart with 3 bars: '0-30', '31-60' and 'other'
these bars repsent the number of people who are in that age bucket.
This was accomplished by taking the peron's Age (a dimension with an age column) and using the 'bin' option in obiee 11g answers.
When the user clicks on one of the bins in the bar chart (e.g. 0-30), it should navigate to another report which contains details (a table) of ONLY the people who are in that age bucket.
In order do this I created the same 'age bucket' in the drilll through report and set the field as prompted.
This works in OBIEE 10g but in OBIEE 11g when I click the 'bin' (e.g. 0-30) on the top report, it navigates to the other report via action link and displays ALL of the people, not just the people in the bucket 0-30.
Can anyone advise?
P.s. if I remove the bin for the age bucket, and display the actual age, the drill down works fine. I think the issue is specific to the bin feature. I am using OBIEE 11.1.1.6.4

Just confirmed with Oracle this is bug 13996544 . FYI just incase it helps anyone

JBCL 2.0 and Oracle 8.0.5 Objects Option

I4m working with JDeveloper 3.1.1.2 using JBCL components and Data Express to connect to an Oracle 8.0.5 database with Objects Option.
I use a valid SQL like :
SELECT C.DENOMINACION AS DENOMINACION, C.OBSERVACIONES AS OBSERVACIONES, C.FECHA AS FECHA, C.CONSOLIDADA AS CONSOLIDADA, C.COBERTURAS.NOMBRE AS COBERTURAS, C.ES_DE_UN_TIPO_DE_CONVOCATORIA.DESCRIPCION AS TIPO FROM ELE_CONVOCATORIA_ELECTORAL C
QueryDataSets work fine and they return references to objects as they were another column of the dataset but when i try to get data inside them through something like:
queryDataSet1.getString("COBERTURAS");
i receive:
borland.jbcl.dataset.DataSetException: Unknown column name: COBERTURAS
I can4t even count the number of columns, i always get '0' but the queryDataSet shows me in the design panel all the columns correctly.
Does exist any documentation about what4s happening?
Must i look for a newer version of JBCL or redoing all the work?
null

jdev 3.1.1.2 is designed to work with rdbms 8.1.6, so it provides the rdbms 8.1.6 jdbc drivers with it.
Since 8.1.5 came out, it has been a known issue that you can not use jdbc 8.1.x jdbc drivers to access oracle 8.0.x objects with them.
Check the notes section at the bottom of table "Table 2-1 JDBC Driver-Database Compatibility " in thefollowing topic :
"Requirements and Compatibilities for Oracle JDBC Drivers" located at :
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/getsta1.htm#1008206
by the way --
rdbms 8.0.5 went out of support on dec 31, 2000.
i recommend you upgrade to oracle rdbms 8.1.7 ...
i hope this helps ...
null

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How can I add hyperlink to the object in iCloud pages ?

Hi, there
I want to add hyperlink to the object(image) in icloud pages.
But it looks no such function on icloud(any "add link" botton)
I know that how to add hyperlint to the object in pages v5.2.
1. place object
2. prepare text box and add hyperlink to the text(invisible color)
3. overlay object and textbox
But, in icloud pages, I coundln't do above method.
Pls give me some advice.
Thanks.

The feature to add images in tables is gone, ike about another 90 features that exists in Pages 09.

How to transport the report object from development clint to quality clint

any body knows different ways of transferring report object from development clint to quality clint.pse send ...

Hi..
LSMW:
There are 2 ways for transporting LSMW data from a system to another.
Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. LSMW -> Extras -> Export project
Transport request with this method, you can transport a LSMW project in full (you can not select the objects you want). With this method, the project will be transported as any other SAP object in a transport order. LSMW -> Extras -> Create change request
Program variants
If you have several program variants in a development system that you want to transport, use the following method to transport them:
Execute program 'RSTRANSP' (via se38) and inform the program and/or variant names (you can transport variant of several programs in one shot).
Layout
In some transactions, one can save layout of the screen (sort, filter, ... criteria).
These layouts can be transported: In the required transaction, when your layouts have been saved, go to Settings -> Layout -> Layout Management. Select the desired layouts and go to Layout -> Transport... There you can add your layouts in existing TO or create a new one.
Database data
In some unusual cases, you might have to transport data of a SAP table.
Go to transaction SE16, select your entries and go to Table entry -> Transport entries. It's only possible for some tables...
If you cannot do it that way,you have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list.
Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TABU
Object name = Name of your table
Double-click on the created line and, depending on your need, put '*' in the key field or double-click on it and select the key you need to transport.
Queries
Queries, datasets and user groups can be exported/imported between the systems using the Program RSAQR3TR.
Report template (ALV variants)
There is a button or somewhere in the menu Change/Select/Save/Manage Layout.
Go to Manage Layout, than Layout menu/ Transport.
SAPSCRIPT Files Transport
Use the program RSTXSCRP to upload and Download the SAPSCRIPT files to different systems
Transport SAPSCRIPT
Use the Program RSWBO052 to create the Transport Request for a SAPSCRIPT, In the Selection screen of the program, give R3TR FORM Give the Form name and press Execute button, it will ask the Development Class and the transport Request No.
Standard texts
Standard texts used in SAPScript(created with transaction SO10) can be included in transport orders. You have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list. Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TEXT
Object name = TEXT,,ST,
Example :
R3TR / TEXT / TEXT,YMM_MEDRUCK_MAIN_16_EC,ST,F
Reward if useful
~Lakshmiraj~

How to copy report properties into another report?

I have created one updated list report and I wanted to create another updated list report with same report properties of first one but with different data objects so I don't have to redo properties settings.
I copied first report to another name and I tried to change data objects but It didn't allow me to choose different data object. It says "Data object must contain at least the same fields as in the Original Data object".
Do I have to create another report from scratch?

You could edit the report xml.

PERFORMANCE of this REPORT object

Hi Experts
I have a REPORT object, having a few SELECT Queries in it. I need to analyze the PERFORMANCE of this REPORT object.
How can I analyze the performance of a SELECT Query alone in it - that is time taken to execute this SELECT Query alone?
How can I find the total execution time taken by the REPORT object?
Plz suggest.
BD

Hi Bobby,
TYPES : BEGIN OF gtyp_rbkp,
          belnr TYPE re_belnr,
          gjahr TYPE gjahr,
          budat TYPE budat,
          usnam TYPE usnam,
          lifnr TYPE lifre,
          ivtyp TYPE ivtyp,
          lieffn TYPE lieffn,
        END OF gtyp_rbkp.
DATA : gt_rbkp TYPE STANDARD TABLE OF gtyp_rbkp,
      gs_rbkp type gtyp_rbkp.
DATA: gv_str_j TYPE i,
gv_end_j TYPE i,
gv_run_time_join TYPE p DECIMALS 2.
constants : lc_a type char1 value 'A'.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-015.
SELECT-OPTIONS : so_belnr FOR gs_rbkp-belnr,
                 so_gjahr FOR gs_rbkp-gjahr NO-EXTENSION NO INTERVALS,
                 so_usnam FOR gs_rbkp-usnam,
                 so_lifnr FOR gs_rbkp-lifnr,
                 so_budat FOR gs_rbkp-budat NO-EXTENSION OBLIGATORY
                                            DEFAULT sy-datum.
SELECTION-SCREEN: END OF BLOCK b1.
start-of-selection.
write: 'testing performance'.
get RUN TIME FIELD gv_str_j.
SELECT belnr
         gjahr
         budat
         usnam
         lifnr
         ivtyp
         lieffn
    FROM rbkp
    INTO TABLE gt_rbkp
    WHERE belnr IN so_belnr
      AND gjahr IN so_gjahr
      AND budat IN so_budat
      AND usnam IN so_usnam
      AND lifnr IN so_lifnr.
IF sy-subrc EQ 0.
**delete entries from GT_RBKP where IVTYP ne A(Invoice from Parking Function)
    DELETE gt_rbkp WHERE ivtyp NE lc_a.
ENDIF.
get RUN TIME FIELD gv_end_j.
Now get the runtime.
gv_run_time_join = ( gv_end_j - gv_str_j ) / 1000000 .
write:/ 'Report RunTime with delete is ', gv_run_time_join, 'seconds'.
clear : gv_str_j, gt_rbkp[], gv_end_j.
Hope this will help you.
Regards,
Phani

Hyperlinks - Another Report Object option

Similar Messages

Maybe you are looking for