Hyperlinks are not working when I convert MS PPT with notes to PDF

I am using MS Powerpoint 2010 and have some hyperlinks throughout the presentation.
When I Save as "PDF" and select the options "Notes pages" and open up the PDF, I see the slide and then the notes on the bottom of the page but the hyperlinks within the slide don't work.
I am using Adobe Reader 10.1.4

Do the links work if you save the actual PPT? In my version of PPT and Acrobat, there is no option to select notes in the Save As PDF item. However, the Save As PDF or XPS does provide the notes as an option. However, this latter approach is the MS conversion and not the Acrobat version. I suspect that MS decided there was no need to embed the links for Notes.
If you have the Acrobat option, then it will appear as just PDF in the Save As menu and you would also have an Acrobat menu in PPT that has a create PDF button. I am not on my AA XI machine and cannot check, but I don't think that Acrobat provides the notes out put unless you print to the Adobe PDF printer. In the print case you would not get the links. So check just how you are creating the PDF and be sure whether you are using the MS option or the Acrobat option.

Similar Messages

  • Microphone not working when using a phone call, Microphone not working when using a phone call

    Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.

    Hi Mike
    That was very helpful thank you.
    I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future.  I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
    The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
    Best wishes
    Rob

  • I have an iphone 4s, I installed Vtok but the video chatting part of the app is not working when I try to chat with my husband through gmail on his PC. Can I fix this or is there another app that will let me chat with my gmail chat contacts?

    Vtok video chatting is not working on my iphone 4s. When I try to do a video chat with my gmail chat contacts who are using a PC we each only get the voice part of the chat and no video. Is there some way to fix this or is there another program that will let me video chat with my gmail chat contacts? Thank you.

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • Page Process Does Not Work When Column for APEX_ITEM.HIDDEN is not shown

    I have created a Report Region based on a SQl Query. In the query I have three columns that need to be within an array, but 2 of the 3 columns should not be displayed on the report. Therefore, I don't have Show checked for them in the Column Attributes of the Report Region.
    In my testing, if I don't display the columns that are within the arrays on the report and run the page process to insert records into a table, I receive the error of "no data found". In reverse, if I display the columns, my insert is successful.
    Is this how the arrays work? Or is there something I have not done correctly.
    Below is the query for the Report:
    SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
    APEX_ITEM.HIDDEN(2,C.PARTY_ID) ID, -----this is the column I want to hide-----
    APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE) PTYP, ----this is the column I want to hide----
    C.PARTY_TYPE_CODE,
    S.PERSON_ID,
    S.PERSON_FIRST_NAME AS NAME,
    C.PARTY_CASE_ID
    FROM CASE.PARTY C
    INNER JOIN DN.PERSON S
    ON C.PARTY_ID = S.PERSON_ID
    WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
    AND C.PARTY_SEQ_NO = :P18_SEQ
    Thanks,
    Keisha
    Edited by: user4579720 on Sep 16, 2009 2:30 PM

    Keisha,
    If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
    One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
    Using your query as an example, I would re-write it like this:
    SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
    APEX_ITEM.HIDDEN(2,C.PARTY_ID)
      || APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
      || C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
    S.PERSON_ID,
    S.PERSON_FIRST_NAME AS NAME,
    C.PARTY_CASE_ID
    FROM CASE.PARTY C
    INNER JOIN DN.PERSON S
    ON C.PARTY_ID = S.PERSON_ID
    WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
    AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
    Thanks,
    - Scott -
    http://sumnertechnologies.com/
    http://spendolini.blogspot.com/

  • Clientgen not working when an autotype is used with an xsd

    Here the situation is i am generating java files utilizing autotype using an xsd which in turn import another child xsd and as both have different namespace they class are generated in a different package structure. I wrote a ejb where i expose a method with the user defined objects , which is been generated from the above xsd, as the parameters.Here i cant able to generate the clientgen as its not able to fetch the class of the child xsd complex type.
    Can anybody provide me a suggestion

    Let me be more clear
    - I need to generate java classes using an xsd which in turn import another xsd.Its been worked out with autotype.
    - I need to exposed a service using Ejb which has some user defined datatypes and are derived from the classes generated by autotype( both from the parent xsd and the imported child xsd ) as per the first point, and i used Servicegen to exposed it too... i generated an ear file.
    - Now the issue is when i used clientgen using the above EAR file it cant able to view the Package structure (Namespace) of the imported child xsd.
    Please post ur suggestion

  • Pagination not working when RDL report is integrated with MVC web application using ascx control reportviewer

    I have the below code in my User control ASCX page.
    <form id="form1" runat="server">
        <asp:ScriptManager runat="server"></asp:ScriptManager>
        <table>
    <tr>
                <td>
                    <rsweb:ReportViewer ID="rvDracas" runat="server" Height="100%" Width="100%" ProcessingMode="Local"
                        DocumentMapCollapsed="true" SizeToReportContent="True" PromptAreaCollapsed="True"
                        ShowCredentialPrompts="false" ShowBackButton="False" ShowPrintButton="true"
                        AsyncRendering="false" ShowFindControls="false" ToolBarItemBorderStyle="None" ShowToolBar="true"
                        ShowReportBody="True" ShowPromptAreaButton="True" ShowRefreshButton="True" ShowZoomControl="False"
                        ShowParameterPrompts="False"  ViewStateMode="Enabled" OnLoad="rvDracas_Load" onclick="window.App.submitting
    = true;" style="margin-bottom: 0px" OnPageNavigation="rvDracas_Load"  >
                    </rsweb:ReportViewer>
                </td>
            </tr>
        </table>
    </form>
    In page load I am filling the RDL with the data source.
    When I click on Page navigation control it is throwing me the below error.
    "Unhandled exception at line 885, column 13
    0x800a139e - JavaScript runtime error: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed.
    Please help...

    Hello,
    Welcome to MSDN forum.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because you are doing ASP.NET MVC app development, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • Added preset motions to my interactive pdf file. It's not working when I export my file as an inter

    I added preset motions to my interactive pdf file. It's not working when I export my file as an interactive pdf. It's working when I play it on the Preview panel. I must not be doing something right. Does anybody have any clue what I need to do to have my presets motions work when played on Acrobat

    So do you mean export the whole document in a swf file format and then bring the whole swf file in and save it as a pdf file.  Is there way to export these motion presets seperately and bring them back into Indesign. I wish it was less difficult but I guess there is no way around it for the time being.

  • Hyperlink is not working when running on sun solaris OS

    Hi,
    I have Created PDF file using oracle reports 2.5 version and included hyperlinks in reports which will open files located on our intranet server(http://cup2.ngc.co.uk). Hyperlinks are working properly when I generated report on window xp machine but not working when I compiled and executed report on solaris unix server(reports 6i).
    please let me know why hyperlinks is not working when executed on solaris((5.8). do we need any setup to work hyperlinks on unix server.
    Thanks in advance,

    Ok, there are 2 docs i've tried.
    A = Doc created originally from MPB Pages with hyperlink
    B = Doc created from iPad Pages with hyperlink
    A was transfered to iPad Pages using iTune. I emailed A as pdf from iPad to gmail and reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, not working. BUT, when i read A using MBP gmail, the link is ACTIVE, i click on the link and it brings me to the correct webpage.
    As for B, after the page was created with links on iPad, i emailed B as pdf from iPad to gmail, reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, and this time, when i read B using MBP gmail, the link is NOT active as well.
    Weird huh? I'm starting to sense that is the problem with iPad Pages. What say you?

  • Picture hyperlinks not working when published? Please help....

    Some of the hyperlinks to my pictures do not work when I publish to my folder. I´ve tried to empty Safaris cache but it still doesn´t work. Please help me, pretty urgent....

    hi briebrie,
    this is common mistake, see my post in this thread:
    http://discussions.apple.com/message.jspa?messageID=4004970#4004970
    The work around is to leave iWeb default nav bar and header enabled, add your home made nav bar (outside/below of iWeb default nav bar).
    Then turn off iWeb nav bar and header when you are done.

  • Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there

    Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder.

    Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

  • I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

    I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

    Go to Finder > Preferences then select the General tab
    Make sure External disks is selected.

  • My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

  • Hyperlinks to pdf files not working when project is exported out as SWF and uploaded to server

    hI all
    I'm using CS5 and i have hyperlinks to pdf files in my indesign project. However when i export to SWF, although the links work locally, they do not work when i upload all the relevant folders and files and test it from a server the links to the pdfs can not be found, the error messages indicates its looking for the files on my hard drive. I have also noticed that if i copy all the relevant folders and files and exported swf to a different directory and then launch swf from there the links do not work there either.
    Other than seperately uploading each pdf indvidually on to the server and then creating a hyperlink to it from the local indesign project i don't know what else to do.
    Any advice much appreciated.

    I have your same problem, but didn't consider uploading the PDFs and then linking to them. I'm willing to try it. Let me know if you ever found a better way, ok?
    Thanks.
    Lynn

  • My previews are not working when I make adjustments

    My previews are not working when I make adjustments?
    I am wondering why this may be?
    I just bought the program like 1 week ago too :-(
    Any ideas?

    What kind of adjustments are you making? Where are you looking for the previews? If you're using select list of filters or color adjustments, have you enabled 'Preview' in the dialog box?

Maybe you are looking for