Hyperlinks different in preview mode

The hyperlink SEEMS to be set up correctly - Dardanelle should link to the geezer music club site but when the page is previewed in a browser, a different page opens - one that is not linked to the test???!! This is a discography page with about 20 artisits - so this linking problem has been time consuming.
Is there a list somewhere of all the Adobe Muse eccentricities and possible workarounds?

Thanks Sanjit. I've spent HOURS on trying to resolve this problem. I see what you're saying but I can't find a way to SEE what the text is linked to! SO - I went through all the CD covers while previewing in the browser and made a list of all the hyperlinks that were wrong - it was about eight. I went back into design mode and even though as the screenshot above indicates - the text boxes were linked to the correct URL - at my wits end, I deleted all the text boxes and again entered the correct urls into the hyperlink area - now they go to the correct page but the hyperlink style is not applied - even though it is set up in site properties! Some of the letters of the hyperlink eventually accepted the hyperlink style - but not the whole words

Similar Messages

  • How come that the design mode looks different than preview mode with slideshows?

    hello,
    I am placing a slideshow on the site. when I look in the preview mode the slideshow is not exactly in the same place.
    How come? Am I doing somthing wrong?
    thanks for response

    Welcome to the medium that is the web. Every browser has it's own text layout engine and "web-safe" fonts are a misnomer. You cannot rely on text line breaking the same in different browsers. Thus creating text frames that snuggly fit the text within is likely to result in what's occurring on your site in some browsers or browser versions.
    As a general rule, you should attempt to use Web Fonts whenever you can. Use "Web Safe" fonts as a second choice. And only use System fonts as a last resort and only for small amounts of text (since they become an image when output).
    If you want a specific portion of text to absolutely never go to two lines, you'll want to put it in a text frame that significantly wider than the text so when the line length varies the text doesn't wrap to a new line.
    "Web Safe" fonts are not a single font but actually a list/stack of fonts where the browser goes through the list until it finds a font that's available on the current viewer's device. The fonts in the list/stack are similar in visual appearance and font metrics, but any difference in font metrics is sufficient to result in changes in line breaks, so when using web safe fonts you need to account for much larger variations in line length and line breaking than will occur when using a Web Font.

  • Exported swf formatting differs from preview mode

    When I view a model in preview mode, everything looks fine with the formatting.  However, after exporting the file (or viewing the export preview), some of the formatting is incorrect - such as axes labels and titles being truncated or moved from their original position, as well as grid sizes changing so that what I have aligned no longer is aligned. 
    I can make formatting adjustments in the model so that it appears more properly in the exported swf file, basically correcting for these differences.  However, this is obviously not ideal, and I have not been able to identify any patterns in these discrepancies (sometimes it looks fine, other time not).  I appreciate any suggestions!

    Hi,
    I am facing the same issue too. The whole formatting goes off once exported to ppt. The fonts reduce to such an extent that I cannot see the fonts. If I drag the swf component to full screen in ppt, the labels, come over the axes.
    Please let me know how to correct it.

  • How do you see "invisible" hyperlinks in preview mode?

    I've been struggling with this one for a while now.
    We're producing a large product catalog to be used both in print and as a PDF. In the PDF version we want to have hyperlinks from products, and prefer the "invisible" link style.
    Is there a way to make these "invisible" hyperlinks visible in Preview mode within Indesign. I'm aware of the Hyperlinks panel, but it doesn't show location on the page. The purpose behind this is to make sure all the text on the page that should be linked has been properly linked.

    I think given that the point of preview mode is to show you what the final appearance is going to be, the answer is basically no.
    But here's a possible workaround. You can create a hyperlink character style and apply it to all your hyperlinks. Set a character color, or underline or some other visual trigger. When you are finished editing the catalog, edit the style to remove the visual cue before you export.

  • Table Values in Preview Mode are Different Than in Development Mode

    Any idea why the values in a table row would be different in Preview mode than in development mode? They are only different in 1 row. The values in this row refer to values in another part of the spreadsheet that are generated by formulas. They apprear fine in Xcelsius but change in the SWF.

    Hi Tony,
    Thank you for sending the files to me. Our QA testers noted that one problem with the spreadsheets is that the Chart is linked to cells in your spreadsheet that are protected. This will prohibit the Chart from accessing the data in those cells. Can you send me the files again, but with all cells unprotected?

  • Different font quality in preview mode

    Hello,
    is it normal that fonts become so bulky in preview mode?
    I´m using a Webfont in this case (PT Sans Narrow Bold)
    Especially the button text.

    Hi,
    Please refer to the following threads for more information,
    Web Fonts (Not Working) - http://forums.adobe.com/message/4435315
    Safari, IE, and Firefox display website type differently - http://forums.adobe.com/message/4584137#4584137
    Regards,
    Abhishek Maurya

  • Elements in Design Mode and Preview Mode are Different

    I've encountered an irritating problem in Muse. The elements arranged in design mode are shifting erratically in preview mode. I'm trying to set up "buy" links for my client's CDs using amazon, cdbaby, itunes icons. The buy buttons are place below the audio player widget from MuseGrid. Right now they are just pics - no hyperlinks attributed. If anyone has advice, I'd be grateful as this problem is driving me nuts and costing me hours!!! I am using the
    Design Mode                                                                                                Preview Mode

    Hi,
    Please try grouping the objects on the page. It resolved such issues in most cases.
    Regards,
    Aish

  • Preview mode fall apart when viewed on different workstation

    Has anyone had this problem: a page's DPS funtion works fine when viewed in the overlay creator's preview mode on one mac and not at all on another. They are authored from the same version of InDesign CS5.5 using two different computers.
    Thanks in advance for any insight.

    You’re going to need to be more specific.
    Bob

  • Different display page layout in Display Layout mode and in Preview mode

    Hi everyone,
    can anybody help me to understand why it is different display page layout in
    Display Layout mode:
    I have 2 collumns
    and in Preview mode:
    I have only one column
    is there some option that I didn"t check in layout page properties?

    The only thing you can try, is to have a defined number of lines, where the last line only consists of a few words. That may(!) give enough room for different browser rendering. But there is definitely no guarantee.
    You may as well force the text frame to be converted to an image (Place one single character – point, space – out of a system font. This will force Muse to convert the text into an image – thus preventing txt reflow)

  • Encore chapter markers off / different when playing DVD and when watching in Preview mode

    I'm using CS6 and Encore version 6.0.0
    I have a 120 min project with about 17 chapter markers. The markers were set to a older version of the project and then I extended the project by about 5 min and did a Replace Asset in the timeline. I adjusted the markers in the timeline. When I view the project in the Preview mode the chapters markers start at the right place but then I burn to DVD and they are off by about a minute.
    I've tried deleting the cache and buring again but it's still off.
    I think doing the Replace Asset messed things up but when it plays fine in Preview but not on the DVD something is really wrong.
    Thanks

    Update: I removed everything from the timeline and started over and entered the chapter markers. They are still off and now it's worse.
    I have 21 chapters. 6-10 are off the rest are ok. I am burning to a dual layer DVD but I don't think that would be the reason.
    Lastly, the DVD player skips over the final chapter it goes from 20 to the begining of the movie skipping Chapter 21.
    What the heck?!

  • Text Field location differs on design view and preview mode

    I am using Adobe LiveCycle Desginer ES.  I am updating forms currently created in Livecycle 6 and 7.  I am noticing the text fields are lower on the preview mode than where I have placed them on the design mode. In design mode, they are perfectly in line with the other text.  When going to preview they are off anywhere from a couple centimeters to a couple inches.  I have started over with new forms and had this same problem.
    This issue mostly occurs when I have a text box with a large amount of text and I place text fields over the text boxes.  Has anyone had this issue also?  If so, is there a solution?  This issue never happened in 6 or 7, I am only seeing this issue in the ES version.
    Any help would be appreciated. (I am willing to recreate the forms, but that has the same issue also.)

    In version 7 there were updates made to the text engine. There were situations where things did not align correctly. To solve this there was an option added to allow you to revert back to the old engine. To do this go into the File/Form Properties/Compatibility then click on the button for the Revert Text Formatting and try your form again.
    Note that at some point in time you should update your form to use the new engine and stop using the version 6 of Reader/Acrobat.
    Hope that helps
    Paul

  • Colors are previewing differently than design mode

    Anyone run into this problem before.... I've got a picture that looks way darker/desaturated in design mode than it does in preview mode. It doesn't happen with all pics, but it's a little irritating.
    See pics (the second one - Preview mode - is correct):

    Yes same issue. On the left is design mode. On the right is the preview in the browser. The preview in the browser is correct. This site was built in the previous version of Muse.
    Something needs to be done about this quickly or I see no point in using this software. It is visually inaccurate.

  • When Searching for attachments to mail, preview mode doesn't work

    When I am in mail and am composing a new email and I click "Attach" to attach a file, the current folder comes up and shows the preview mode of every file type (i.e. pictures and pdf previews). No problems. However, if I then do a search for something (my name for example) to narrow down my choices of files or images to select, the next search level does not show a preview of the files or images, just a .pdf icon or the .jpeg icon - NO PREVIEW. This is extremely frustrating! I tried on different folders and the same results occurred. Any ideas or is this a bug?

    Hi Pranava,
    I couldn't reproduce this issue, when I create root folder FS0 in "Shared Documents" and start a full crawl, I click the FS0 link from search results page, it will open the FS0 folder as well as folder under FS0.
    Please right-click the FS0 name hyperlink (e.g. mine is http://sp/Shared%20Documents/FS0) and paste in IE browser see if it could be accessed successfully.
    Also test if other Shared Documents have this issue in other site collection or web applications, if not, run a full crawl may do a trick (please reset search index if only full crawl still doesn't work).
    Thanks
    Daniel Yang
    TechNet Community Support

  • Adobe PDF Portfolio - Preview Mode Displaying Incorrect Pages

    I have created a PDF portfolio using the “Grid” template in Adobe Acrobat XI Pro. The Portfolio contains three pdf files. I am getting the following problem when I open the pdf Portfolio in Adobe Reader X and XI and Adobe Acrobat Pro XI.
    Open the PDF portfolio
    Click on pdf3
    Preview mode displays the correct document and pages.
    Close the preview of pdf3
    Click on pdf2
    Preview mode displays pages from pdf3,not pdf2 (see screenshot below).
    Some observations:
    If pdf1 has two pages, and pdf2 has ten pages, pdf2’s preview contains pdf 1 (pages 1-2)  and then pdf2 (pages 3-10).  
    If I continue to open pdfs the preview contains pages from all the pdfs I have opened in the portfolio (this depends on how many pages the document I am currently previewing has). It is not just caching the last pdf opened. 
    Preview mode always displays the correct NUMBER of pages (i.e., if there are ten pages in a pdf, there will be ten pages in the preview. They will just be the wrong pages).
    Turning off local page cache (preferences > page display) does not fix the problem.
    Adobe Reader is up-to-date and Flash is up-to-date. I have replicated the problem on different computers, and in Adobe Reader X and XI, and Pro XI. I have also created muliple pdf portfolios from scratch to confirm the pdf portfolio itself wasn't corrupt.
    Does anyone have an idea what is happening? Users are getting very confused when their preview shows them a completely different document.
    Thanks for any help

    We have the same problem. Everything's up to date. Adobe needs to address this issue!! The portfolio feature is a great idea, but this glitch basically ruins it. If you come by this page with the same problem, make sure you leave a reply. Maybe Adobe will actually pay attention if there are enough complaints.

  • Looks good in design and preview mode, online there is box in lower right corner! How to find box and delete it?

    www.nssgranite.com
    Online, scrolling down and to the right, there is a white box that is linked to a different web site of mine. I don't want that box to be there, but I can't find it in design mode nor preview mode when working with the Muse program. Where is it?? I want to delete it!!

    Thank you. However, I went in, expanded every single layer and did not see anything that was missing it's "eye". I clicked and unclicked everything that was a rectangle and found one rectangle that didn't seem to have representation on the screen. I deleted this rectangle from the layers box, uploaded the site to the internet hoping for the best, and unfortunately this did not solve the problem.
    I wonder, should I just create a new page from scratch to replace this page?
    I don't know if you've seen my other question, but this isn't the only problem I am having with my Muse site. The layout is distorted on all but a select size of screen, and most likely I am going to have to revamp things quite a bit to make them work on the average computer display.
    Thank you for any further suggestions because I am totally open to other thoughts on this!!

Maybe you are looking for

  • Picture too dark

    Why when i print a photo from windows my photo prints just fine.  when i print the VERY SAME photo from photoshop elements it is very very very dark.  Also Why is there such a difference in color from what is shown in photoshop to what prints?????

  • When i try to download an app, i get a message that says my applied has been disabled

    when i try to download an app, i get a message that says my applied has been disabled, what can i do, i already reset my password??

  • Display conditional Image in Report Column

    Hi, I'm quite new to HTMLDB and searched the forum for the mentioned matter: I have a report with about 3 columns. In the second column(Col2) I have a values like male or female. Is it possible and if yes how to insert an image before the value in Co

  • Best Ways to Back-Up (I work as a freelance/consultant)

    Hello, I was wondering what everyone's thoughts are on the best ways to back-up their computer. I currently have one external drive dedicated to Time Machine and another (older) external drive that is a compilation of thousands of documents from old

  • Apple Remote causes 21.5" iMac to check for a disc in the superdrive

    Whenever I press a button on the Apple Remote (new, aluminum one), I get the same noise from my superdrive as when the iMac boots -- like it's realigning the heads looking for a disc. Is anyone else seeing this behavior?