Hyperlinks edits are not retained when site is published

I am trying to link images on a page to specific url in iWeb slideshow. I am setting up the link as an external link and paste the entire url from the slideshow. I have gotten it to work but not consistently. If I cut and paste the url from the slideshow into the link inspector and edit the photo number (after the #) that edit does not seem to be retained when I publish the site. In fact, when I view the link characteristics in the inspector the type has changed to file and the name of the file is the photo file name.
Any ideas what is happening. Like I said, I have gotten it to work but I cannot seem to figure out why some work and others do not.
Thanks,
David

Point of clarification... I was not linking directly to the slide show but rather the page that is automatically generated from a gallery page when you click on a thumbnail. This keeps the formatting of that automatically generated page.
Update: I've been able to resolve the issue. The solution I found is as follows:
For each of the photo links I set the "Link To" value to "One of My Pages" and selected the main page. Then I set the "Link To" value to "An External Page" and then my pasted url was saved.
One of my coworkers suggested that I create five additional pages formatted exactly like I those that are automatically generated but DO NOT add them to the navigation bar. This method also works.
-David

Similar Messages

  • Aperture 3 edits are not applied when opening in Photoshop CS5.

    I have Photoshop CS5 selected as external editor.  I apply some edits in Aperture 3 and then open in Photoshop cs5 to do heavier work, but aperture 3 edits are not applied.  I get a new image from Master.  How do I get the edited image to open in Photoshop CS5?  I would rather do the cropping and simpler edits in Aperture, then if needed open the edited file into CS5.  I can open the file, but it is missing all of my edits.  I have basically a raw master file that I have to start with, but don't have the advantage of the raw file.

    I'm right clicking on the photo and selecting -> edit with Edit with Adobe Photoshop CS5.  The photo opens in Adobe, but it doesn't have any of the Aperture edits applied to it.  I would have to start from scratch doing these in photoshop.  I want to be able to do the Raw adjustments in Aperture and then open into Photoshop. 
    To test I applied a crop in Aperture and then opened that file in Photoshop.  The full size image opens in Photoshop. 

  • Svg background tile not displaying when site is published

    Hi,
    I have a few pages with an SVG tile graphic in the background (that makes a stripe pattern). Inside the Muse Application these all preview fine when viewed with the browser page preview inside Muse. However, once I publish the site as HTML and upload it to the web, the tied SVG graphic has disappeared.
    But other SVG graphic such as Logos and icons all display fine. So I'm a bit confused.
    Any suggestions?
    FYI This issue seems to be the same in Safari, Chrome and Firefox.
    Cheers,
    Robbie.

    Hi Robbie,
    Does that SVG background appear OK, after you view the locally exported HTML version of the site before uploading it to server.
    Also, could you publish this site on a trial new business catalyst site by hitting Publish button, and check if that looks fine, just to separate this issue from the server side or Muse side.
    Thanks.

  • My firefox toolbars are not visible when I open firefox

    All of my firefox toolbars are not visible when I open firefox. I get the tabs but no command menu no search bar or any other toolbar icons help!!
    == This happened ==
    Every time Firefox opened
    == when I logged on one day about 2 weeks ago ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(Linux & OSX see: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
    <u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''

  • Changes are not reflected when objects transported from Quality to Productn

    Hi
    In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
    Would any one help me out in this with the reason for this.
    Pls suggest what needs to be done.
    Satish.

    HI,
    Thanks for the reply.
    - I have checked the respective transport too, and every thing seems to be fine.
    - Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
    - Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
    - Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
    Satish.
    Edited by: satish c on Sep 22, 2009 3:35 PM

  • I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • "Content Editing" is not available when I go to the Tools sidebar--how can I access these features?

    "Content Editing" is not available when I go to the Tools sidebar--how can I access these features?  I'm using Acrobat X 10.1.7.  Thanks.

    The headings under Tools are: "Pages", "Content", "Forms", "Recognize Text", "Protection", and "Sign & Certify".  There's also a little icon in the upper right that lets me access some other headings under the Tools menu; those are: "Document Processing", "JavaScript", "Accessibility", and "Analyze".
    I did think about the idea that maybe the Content Editing was a new feature of Acrobat XI, but I found some resources online (http://www.wikihow.com/Edit-Text-in-Adobe-Acrobat) that seem to indicate this was a feature on much earlier version (the link references Acrobat 8 at the bottom).
    Really confused...
    Thanks for your thoughts

  • Hi Many of websites like facebook gmail are not opening when my Kasperskv antivirus is active and when i deactivate anitvirus vidoes open but doesnt complete

    Hi Many of websites like facebook gmail are not opening when my Kaspersky antivirus is active and when i deactivate anitvirus videos open but doesn't complete play

    Hi vivian87,
    Please configure your antivirus to allow for these sites. I beileve you can do this in the settings [http://support.kaspersky.com/kav2014/settings]
    These are the connections on startup [http://kb.mozillazine.org/Connections_established_on_startup_-_Firefox] though this may be a little out dated.

  • Cache, cookies and history are not clearing when I close Firefox even though they are set to do so and have been for ages

    I recently had an update (or upgrade?) for FF 16. Today (and I believe the update was done a day or two ago?) my cache, cookies and history are not clearing when I close FF. Also, certain links are not working. Not links for full web pages but for site pop-ups (like the smilie window on a message board). They worked a few days but are not working today. I click the link and nothing happens. I noticed the problem with the cookies not clearing for a few weeks ago but it was only on one site not all sites which is what's happening now.
    My apologies if that's a little confusing. Thanks!

    At any rate, have you tried running Firefox in Private Browsing mode? This will ensure that no infromation from your session is saved once you exit Private Browsing mode and/or exit Firefox.
    You can set Firefox to always start in Private Browsing mode: https://support.mozilla.org/en-US/kb/private-browsing-browse-web-without-saving-info#w_how-do-i-always-start-firefox-in-private-browsing

  • Alerts are not working for Site collections in a content database

    Hi,
    We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
    or changes happen in the list/document library.
    We have tried with Immediate as well as scheduled alerts both are not working.
    FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
    Any help would be appreciated.
    Thanks
    Ramkumar

    Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
    job-immediate-alerts
    job-daily-alerts
    job-weekly-alerts
    Please check this wiki -
    Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • My security answers are not accepted when downloading movies. Why

    My security answers are not accepted when downloading movies.TRIED restting the security question that did not work.  Called apple support --- no help.
    I'm at a lost PLEASE HELP

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
    Go to: Apple Express Lane;
    Under Product Categories choose iTunes;
    Then choose iTunes Store;
    Then choose Account Management;
    Press Continue;
    Now choose iTunes Store Security and answer the bullet questions, then click Continue;
    Sign in with your Apple ID and press Continue;
    Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
    Click Send.
    You should get a response within 24 hours by email.
    Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
    on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
    Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
    sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
    At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • Security question answers are not accepted when renting movies. Why? How do you correct?

    Correct Security answer are not accepted when renting movies.
    Why? How do I correct the problem so I can watch movies?

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
    Go to: Apple Express Lane;
    Under Product Categories choose iTunes;
    Then choose iTunes Store;
    Then choose Account Management;
    Press Continue;
    Now choose iTunes Store Security and answer the bullet questions, then click Continue;
    Sign in with your Apple ID and press Continue;
    Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
    Click Send.
    You should get a response within 24 hours by email.
    Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
    on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
    Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
    sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
    At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • How to fix "OS X Lion user's custom preferences are not retained after reboots"?

        How to quickly fix "many of user's custom preferences from within OS X Lion 10.7.x and/or MtLion 10.8.x are not retained after Mac reboots and/or log-offs"?

         If many of the user’s custom preferences from within OS X Lion 10.7.x and/or Mountain Lion 10.8.x are not retained on Mac after reboots and/or log-offs, then implement this following QUICK FIX procedure:
    Login to user’s OS X login profile… access & select the Finder pull-down menu Go… next select Library (just user’s Library only available when holding-down the Option key here within OS X Lion + MtLion)… find-select-and move the Preferences folder out from the overall user’s Library to the user’s Desktop area for temporary safe keeping.  Then log-off user and/or reboot Mac… log-in as user, and reset all user’s custom preferences (System Preferences, Dock icons, etc. [OS X system now recreating all user’s login profile preferences]) according to their previous Desktop setup.  Finally reboot after making all new user preferences setting changes… log-in again as user, and check to ensure that all user custom preferences now stays retained.  If all OK, then you may move the corrupted Preferences folder from the user’s Desktop area to the Trash for final deletion.
    *NOTE: Is this above-written QUICK FIX completely acceptable to Apple's OS X Lion + MtLion troubleshooting standards?  So far this solution appears to have fixed a recent iMac user's issues with custom preferences.

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • Screen values are not retained in Tcode BP, onclick of SAVE button

    Hi,
    In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
    Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
    The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
    Regards,
    Deepthi.

    OSS Note 1254214 is applied and it is solved.

Maybe you are looking for