Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

Similar Messages

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Murray is right. Padding (and margins) is added to the width. However, when using percentages, you should never use figures that add up to exactly 100%.
Browsers need to convert the percentages to pixels. Because pixels must be whole numbers, some percentages are rounded up, which results in the final element dropping down below its neighbours. With percentages, it's much safer to use values that add up to 98% (99% often works, but 98% is safer).

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad?

Blacks turn dark grey after exporting to pdf from InDeign cs6

Exactly what the title says. The one on the right is from Indesign....the left one is after exporting (the same in preview and acrobat reader).Anyone know why this happens?

In this case it looks like the color change is because the color mangement settings are not sync'd and not a color conversion—if there was a CMYK-to-CMYK conversion on export the image wouldn't show through.
ID, Acrobat, and Preview all display some black CMYK mixes as something other than absolute black, but the preview depends on the color settings so there could be a shift if they don't match.
Different black mixes US SWOP Coated with Black Point Compensation
The same values with an Uncoated CMYK profile without BPC:

Failed to display CR after export to PDF in Browser

Post Author: asnila
CA Forum: Exporting
Hi,
I had a problem to display CR after export to PDF in browser. No message error displayed except the browser is blank.
Below is the code that i had been used.
Dim RptFilePath As StringDim RptExportOpt As CrystalDecisions.Shared.ExportOptionsDim ExportLocation As New CrystalDecisions.Shared.DiskFileDestinationOptionsDim ExportPath As StringRptFilePath = "C:\Project\reportPro.rpt"myReport.Refresh()myReport.SetDatabaseLogon("root", "", "localhost", "dbpro")ExportPath = "C:\Project\reportPro.pdf"ExportLocation.DiskFileName = ExportPathRptExportOpt = myReport.ExportOptionsWith RptExportOpt.DestinationOptions = ExportLocation.ExportDestinationType = ExportDestinationType.DiskFile.ExportFormatType = ExportFormatType.PortableDocFormatEnd WithmyReport.Export()Response.ClearContent()Response.ClearHeaders()Response.ContentType = "application/pdf"Response.WriteFile(ExportPath)Response.Flush()Response.Close()MyConnection.Close()
Fyi, i'm using Crystal Report 10 embedded with VS 2005. Please help me.

It looks like the 2 DLLs you mentioned, are getting corrupted or modified due to some operation that might have been performed on them. Can you please try the below mentioned instructions and see if that gets your application to install without any errors:
1. Try installing your business app.
2. When you see the error message as stated, try running the below mentioned commands: (Start | Run | Type cmd and hit Enter)
    regsvr32 LTKRN11n.dll /i /s
    regsvr32 LTKRN11n.dll /s
    regsvr32 LTDIS11n.dll /i /s
    regsvr32 LTDIS11n.dll /s
3. The above commands should fix the issues in the mentioned DLLs and allow normal installation of your business app.
Hope this gets your app to work and install properly.

Aperture 3: GPS data gets lost after 'Update from Master'

My library contains photos in JPEG format that I geotag in Places, then I save the metadata with 'Write IPTC Metadata to Master'. The problem I have is, that the GPS data gets lost after I do an 'Update from Master', even if I saved the metadata before. I'm having this problem with referenced and managed photos and all my JPEGs from several different cameras. The only way to permanently store the GPS info into my photos seems to be to export the geotagged photos as versions.
Does anybody has the same problem or knows how to solve this?
Thanks in advance,
Michael

Use Houdah geo (http://www.houdah.com) to write location data back to the EXIF. It's interface is very similar to Places (Google maps and pins) and you can interface with the Aperture library. It's a bit of a pain, but if you need it done now rather than wait for an Aperture 3 fix, then...
Also, see here: http://www.nickrains.com/index.php?option=com_content&view=article&id=65:apertur e-3&catid=12:news&Itemid=24

I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?

I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?

Can you pls guide that when I am restoring my ipad from itunes do i need to restore as new or from backup?????
Also is this problem realted to using same apple id for two ipad..... Pls help and regarding ur suggesting of messing with my ipad , I will keep a check ..

Tried to install Lion. MacBook is running with showing Apples and other signs (questionmarks etc.) without getting finished after hours. What to do?

Tried to install Lion. MacBook is running with showing Apples and other signs (questionmarks etc.) without getting finished after hours. What to do?

The download took hours. But it was completed. After that i got a message that the hard-drive should not be ok. But it started updating the operating system.
Yesterday I now installed Snow Leopard again and started the download of Lion again. Worked faster and is installed now. Now i have a problem with the charger or the battery.

Hi! Trying to save my document as a pdf, get the message that "this pdf is already open somewhere and cannot be saved". Whats wrong??

Hi! When trying to save my document as a pdf, I get the message that "this pdf is already open somewhere and cannot be saved". I have not yet succeeded in saving it, and I've closed all preview windows of it, so it simply can't be open anywhere. Whats wrong??

Correction on Question:
This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
Users began getting the error message:
'The document could not be saved. This file is already open.'
last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject.
We really need help getting this resolved.
Sandy Martin

Unwanted Anti-aliasing after export to PDF!?

Dear comunity,
First of all let me say, that i am relatively new to indesign,
this is really driving me crazy: my boss gave me the task to renew our business cards (no new layout, just different names and addresses.) So i took the indesign file my predecessor made and switched the names and contact information. The indesign file contains three back sides for three different people, every one with their own QR-code.
I made three new QR codes, deleted the old ones and brought the new ones in. (the codes were originally PNG, i put them in Photoshop and exported as PSD, since i heard, that i should use PSD files in ID instead of PNG or JPEG.)
When exported to PDF, two of these QR codes are working just fine, the third one has the following problem: On the edges of the code, thin light gray lines appear, for my untrained eye, these look just like anti-aliasing. These do only appear in the exported PDF, not in Indesign itself, and only in one of the three QR-codes, though i created and imported them all the same way.
I should probably mention, that i made the codes 50% transparent. I already did lots of research regarding that problem, and one person said, that this is a bug, which has been solved in ID CC 2014, so i updated my ID to that version, imported the corrupt PSD anew, still the same problem.
What did i do wrong with this particular PSD file? Might there be a button or something, when i have the psd selected in iD, that toggles AA on and off for that particular file??
I added two pictures. the 1st one is one of those, who don't make any problems, the second one is the one, that has the unwanted anti-aliasing (or whatever it is). I just made screenshots out of Acrobat, because this forum wouldn't let me upload The PDFs. As i said, they both come from the same ID file, exported the same way.
Thanx in advance for all your kind help.
Nigi

Thank you Willi, one more question,
You are saying, i down sampled with the wrong method. So what would be the right method? I just drag and dropped the file and placed using the placegun thingy.
Just asking for future projects, this particular problem will be solved by the internal QR-editor, i'm sure.
Boy that whole print-stuff is a whole new area for me, there's much to learn, so i am very grateful for people like you, who take their time to help a poor autodidact...
Thanks

Running headers wrong after export to PDF

I am trying to use a Running Header (Paragraph Style) variable to display in the header of several sections in an InDesign file. It all works fine when viewed in InDesign. But when I export to PDF, the header in every section displays the title of the first section, not the current section. How can I fix this?

Both. I have a single file divided into three sections, call it content.indd. That file is combined with another file in a book (.indb) The problem arises when I export the book to PDF. The second and third sections derived from the content.indd file are the ones with the incorrect headers.
To be specific, in the PDF rendition, the first section header is correctly "Section 1: Overview." The second and third sections are titled differently, but still show "Section 1: Overview" in the header.
Any ideas?

Pages crashes after exporting to PDF or .doc

This is a problem now that it happens everytime i use pages.
I'm working on a document and then I go to save a PDF by either Export in the File menu
or by choosing "save as PDF" in the printer dialogue
after it saves the PDF as soon as I go back to the pages doc the app crashes.
and asks me if i want to reopen cancel or send a report - which i have done.
this also happens if i save as .doc
maybe i have to reset the app?
this is making pages unusable unfortunately

There used to be a reproducible crash in the past with a footnote, if you deleted the text referencing the footnote without deleting the footnote and then printed/exported to PDF. However, that problem is gone in the latest versions, as far as I can tell.
Apart from that, I do not know of any definite crash scenarios.

Creating a PDF with transparency without exporting to PDF (Mac)

Hi
I need to created a PDF from InDesign that has unflattened (native) transparency without using the export PDF command ( because of the flaw seen here: http://forums.adobe.com/thread/537751?tstart=0 )
I have tried exporting as an EPS and that flattens transparency and creating PS does as well.
Any other ideas, settings or applications/utilities to try?
Thanks
-Andrew

Thanks everyone that was what I thought.
Peter: If we knew when it was happening then we can fix it, unfortunately there is no indicator when it will happen. We get jobs from all over North America from all kinds of designers so it could happen on any job.
It is hard to say how many job it happens on as in most cases it wouldn't be noticed by the client as the amount is so small, and in some case it would happen in the bleed that gets trimmed.
So far we have noticed the issue when it happens in a critical situation and haven't had any spoils but it is just a matter of time.
We are going into Annual Reports soon as well as proffesional sport tickets both of which are critical clients.
-Andrew

Indesign CS4 button flashes after exported to PDF and viewed in Acrobat Reader/Professional X

Hey everyone,
Greetings!
I've encountered this odd problem when preparing my portfolio.
I've created some 40 buttons in InDesign CS4 (all according to the official tutorial) to Show/Hide Fields (specificly images), and navigate through the pages.
The buttons all have their own Normal and Rollover states, but no Click states.
After exporting the file to PDF, I tested the buttons in Acrobat Reader 9 and Acrobat Pro 9, and both the actions and the states worked fine.
BUT that's not the case with Acrobat Reader X or Acrobat Pro X.
The actions are still there, showing the images and navigating, but the states are not!
The buttons' rollover states just flashes when the mouse hover above them, and even in Normal state, they kept *blinking* randomly.
Frustrated for a week.
PS. I suspected and used a Indesign file with only one simple button to rule out the following:
1. Overlapping buttons
2. Slow processing due to large image size
3. Mishandling of transparency
At this moment I'm pretty sure it's an Acrobat thing...Help!

Thanks Dave! I was in the middle of writing this when your post came in:
Not sure if this will help anyone, but I changed the button fill color to white and it seemed to fix the flicker. I exported each state from indesign as a PDF and recreated the button from scratch. This still had the flicker. I'm guessing something strange is happening with the transparancy of the states.
Glad to hear it's fixed!

Last line of table shifts to right slightly after export to PDF

Indesign CS4 (6.0.4.578), Windows XP. Last line of some tables shifts very slightly to the right, but only in exported PDFs. See screencap from PDF below. It's not very pronounced, but Xs don't quite line up, and client can see it.
When I printed to PDF through Acrobat 9 the problem goes away. But I would prefer to export.
For a one-page sample file formatted in Minion Pro (it happens in differing degrees with any typeface), download
http://www.pegtype.com/shifttorighttest.zip.
Any ideas why this is happening?
Ken Benson

It's not showing in the ID file, just in the exported PDF (and not in the printed PDF). And it shows in the PDF you made too, you just have to look at a higher magnification.
This is from the PDF you made and emailed to me. See how the bottom X is a little further to the right? Compare foot to foot, not head to foot. Minion X is narrower at the top.
Acrobat is at 9.3.1. I let the Adobe applications update themselves, so everything should be at the latest point release. No custom dictionary or kerning, though if there was, I would expect the ID file to show the same thing as the PDF.
Ken Benson

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

Similar Messages

Maybe you are looking for