Hyperlinks in PDF fail when security turned on Acrobat Pro 6

The InDesign CS created buttons I exported to PDF stop working when I apply security to not permit changes to document. The other bookmark type hyperlinks work. The external hyperlinks work. Just not the button types.
Using Acrobat 6, OS X 10.4.11, Power PC G4.
Can anyone help?

Hyperlinks in PDF fail when security turned on Acrobat Pro 6
Thank you, Aandi.
That worked. Made my day.
Cheers,
Deborah

Similar Messages

When i turn my macbook pro on I get a green apple then just a white screen

When I turn my macbook pro on I get a green and white lined apple then just a white screen anyone help please ?

Hey there Petecaswell,
It sounds like you are seeing a green Apple logo, and then a white screen before the computer boots to your user. I would start by updating your computer:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/HT1338
Then if the issue persists, I would perform a PRAM reset:
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/PH14222
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Thank you for using Apple Support Communities.
All the best,
Sterling

When I place a pdf that I have cropped in acrobat pro into indesign all the cropped info reappears.

When I place a pdf that I have cropped in acrobat pro into indesign all the cropped info reappears. What can I do?
using mac 10x cs5.5

It has to be done with a Preflight fixup. This blog post explains how:
http://blog.creativeassociate.net/2010/05/17/permanent-cropping-pdfs.aspx

When i turn my macbook pro on , the apple logo shows up, but it is just loading. I have tried to turn if off , but the same problem appears. Someone know what the problem is?

when i turn my macbook pro on , the apple logo shows up, but it is just loading. I have tried to turn if off , but the same problem appears. Someone know what the problem is?

Boot into Safe Mode
A Safe Mode boot can take a few minutes compared to a normal boot.
Once you are in Safe Mode open System Preferences > Accounts > Login Items
If you have anything listed there to launch when you startup your Mac, delete all items.
Then go to the Apple menu / Restart.
You can also use Safe Mode to do a "live verification" of the startup disk in case it needs repairing.
Help here > Using Disk Utility to verify or repair disks

I am trying to convert a PDF to a Word document using Acrobat Pro 9 but am unable to find "Content to edit" under tools. Do I need a newer version?

I am trying to convert a PDF to a Word document using Acrobat Pro 9 but am unable to find "Content to edit" under tools. Do I need a newer version?

Acrobat 9 Pro (not Standard) can export ("convert") PDF to Word, RTF, or other text formats.
Click-path: File - Export
Take your pick.
With install of Acrobat 9 the Help PDF is installed also.
From the this PDF's Bookmarks expand Chapter 5's bookmark and select "Convert PDFs to Word".
Be well...

When trying to download Acrobat Pro XI Student I only get this " http error: 404/support/downloads/dlm/main.jsp " warning.

Hi!
When trying to download Acrobat Pro XI Student I only get this " http error: 404/support/downloads/dlm/main.jsp " warning. This happens with Akamai and the altervative method too. I've paid it, is this because Adobe hasn't progressed my payment yet?
Kind regards, xpooler.

Luckily the problem seems to have vanished. I am not sure what happened but I think the reason was one of the browser extensions, thanks for the advice anyway!

When I turn my MacBook Pro on, the white apple screen shows up with loading circle, but doesn't go from this screen. Why?

It's just a white screen with the apple logo. It doesn't move from this screen regardless of how long it's on. The charger is showing a green light. It was amber before I let it fully charge. I've tried turning it on with and without it plugged in. I hear the hard drive start up when I turn it on. And the caps lock light turns on when I hit it. Any suggestions? Help please.

Start your MBP holding the OPTION key. This should show two HDD icons. Select the one on the right, the RECOVER icon. This should display a four option menu. Select Disk Utility and repair the disk.
If no success, the the only other avenue is is a reinstall of the OS.
Ciao.

CMYK image in a PDF is involuntarily converted to RGB when you send from Acrobat Pro DC to Photoshop for editing

Hi,
When I send a CMYK image from Adobe Acrobat Pro DC to Photoshop CC 2014 to be edited, it opens up as RGB in Photoshop CC 2014. If I do the same with Adobe Acrobat XI on another machine, the image opens as CMYK, as it should normally do. As we had created the print-ready PDF in the first place, we know that the image is definitely CMYK and is properly opened in Photoshop if we use Adoba Acrobat Pro XI. We of course can go back to the original document and edit the linked image and re-export a new PDF. But on many occasions we need to do last minute corrections on images by editing them externally in Photoshop.
Best,
Refik Telhan

It's really necessary to know by which program you had created the PDF.
Here comes a test PDF for questions like yours, created by InDesign:
http://docs-hoffmann.de/riptest05072013.pdf
Different images:
sRGB, pRGB=ProphotoRGB, CMYK , all with individually embedded profile,
Grayscales: without embedded profiles, because InDesign doesn't embed gray profiles,
Lab: without profile, because Lab is automatically detected and not ambiguuos.
Of course, using so many different images in one PDF is useful only for tests.
An actual test:
Touch Up Object Grayscale and edit in Photoshop. There is no embedded profile
but the image is in PS detected as Grayscale. One has to assign a profile.
Re-imported in the doc, it is a Grayscale JPEG*, before it was a Grayscale ZIP.
In Acrobat 8 one can check the actual content of a PDF by
Advanced > Print Production > Preflight
In newer versions this is still available but somewhere else.
I'm using version 8, because I uninstalled X on purpose.
Best regards --Gernot Hoffmann
*Edited:
As far as I remember, there is no special code for Grayscale JPEGs, it's just a JPEG
with zeros in the Cb Cr channels ... like an R=G=B gray image.

This morning when I turned my macbook pro on, an alarm sound came from my computer and a thin, short line of light was flashing next to the pulsing light that did not come on. The pulser light has not come on at all today.

This morning an alarm sound accompanied by a flashing thin light happened when I turned on my macbook pro. Now the pulser light is not coming on at all and there is a steady thin light to the left of the pulser that stays on when I close my laptop. Does anyone know what may have happened?

>an alarm sound accompanied by a flashing thin light<
That seems like a memory problem.
Try resetting SMC and PRAM:
iMac SMC and PRAM reset

HT203254 When I Turn My Macbook Pro On The Screen Dosen't Work

My Macbook Pro Has A Nvidia Geforce GPU And The Screen Won't Work When I Turn It On

Welcome to Apple Support Communities
When you turn on the computer, does it start properly? Do you hear the startup chime and everything else? If so, there may be a display or GPU problem. First, reset the SMC > http://support.apple.com/kb/HT3964
If you have an external display, connect it to your computer and see if it works. If not, it's a GPU issue. If it works, it's a display issue. In both cases, I recommend you to take it to an Apple Store or reseller

When i turn my mac pro off and then back on it dosent load my login pic and says updated needed!!

when i turn off my computer and turn it back on it won't load up with my login pic jus a plain screen and empty pic!
with the words updated needed under the empty pic. however if i jus put t into sleep mode it will load up the pic as it should. bit hard to explain.

Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery

When I turn my macbook pro on it makes a strange sound/noise, is that normal?

I got my MacBook Pro in May 2013 and when I turn it on now it makes a stranfe sound/noise, is that supposed to happen?

In Macs with a DVD reader, you may hear the DVD reader move its Read/Write head at Startup, even if the drive is empty.
The guys at the Genius Bar put their hands on these Macs all day every day. They know EXACTLY what the "Bad Sounds" are.
Ask them. It's free, in warranty or out, provided you make an appointment.

My PDF presets/joboptions dont work in Acrobat Pro 9.0 - help!

We just upgraded from CS2 & Acrobat Pro 7 -- to CS4 & Acrobat Pro 9 - Windows.
Previously I would go here: C:/Documents and Settings/All Users/Shared Documents/Adobe PDF/Settings to manage my joboptions. But after my upgrade, when I go to create a PDF from Illustrator, none of my job options are in the pulldown menu.
In the past I could just paste my joboption files in this folder and wa-lah! Now they're in the folder, but I cant use them... Is there a different location I should put them? Are my old joboptions incompatible with the upgrade? Im having a hard time finding an answer online. Any advice would be so apprecaited.
Thanks!

Since AA6, the job options had to be activated in Distiller. It was not a matter of just placing them in a folder. At least that was what I found when upgrading from AA5 to AA6 a long time back. In AA7, this is under the settings menu of Distiller. I have not checked AA8 lately, but as I remember I had to do the same thing there.

Unique issue with PDF to WORD .doc conversion with Acrobat Pro - any ideas?

I have been unable to solve the following issue when converting (save as...) PDF documents to Microsoft Word .doc using numerous methods. This could either be an issue that would be fixed in Acrobat Pro itself, or in MS Word - posting to the Adobe forums first.
PREFACE: I am attempting to use the converted .doc file with translation applications/software. Google Translator Toolkit is what I use the most, but ALL other translators are having this very same issue with the .doc file. --The source PDFs are product information from drug manufacturers in various countries that I need to have translated to English. I do not have access to their source documents, as they do not provide their own source docs for obvious reasons.
ALSO: I cannot use Google Translator toolkit to translate from PDFs directly - if you do that, it will attempt to translate a PDF and then export in an .html file, but it does not get the exact spacing of the sentences correctly, which leads to errors in translating - key things such as "can take with alcohol" and "do not take with alcohol". So that's out!
I am not having any problems with the resultant .doc file in MS Word itself. It looks right, the spacing matches the original PDF source perfectly, prints correctly, etc... Reference here on a product info sheet from Austria in German:
The problem: This is a screenshot from Google Translator Toolkit - the right side of the image - the spacing in the lettering from the .doc file I am uploading is not being read correctly, resulting in untranslated gibberish. (Note: this isn't a problem with the translation applications or software -- all are having this issue with .doc files converted from .pdf - this issue isn't present with any old .doc file that wasn't converted from a .pdf) -- It's definitely got something to do with some kind of embedded data in the .doc file that I cannot isolate!!)
My settings in Adobe Pro (convert from PDF to .doc):
Page layout: Flowing Text (this prevents the resultant .doc from having all of those text boxes, which also don't then work in translators)
Include comments: True
Include images: True
Run OCR if needed: True
Notes:
-I have run OCR text recognition on the source PDF files in it's specific language.
-I have edited the accessibilty of the PDF and have run the tag recognition and quick checks (to see if they solved the issue, which it did not - tagged or untagged, same problems!)
-I have exported the .doc BACK to PDF using MS Word's function, which results in a great looking tagged PDF. THEN I re-saved this new PDF back as a .doc - same issue.
-I have tried saving the PDF in all of the other formats that the translators accept. All have different issues. The only one that works consistently is saving to a .txt (plain)... The best is a .doc to .doc conversion, with all the original spacing. (I am not spending hours reformatting a .txt translation in word)...
I can't seem to find where this spacing data is in the .doc file!!!! (Changing the fonts, sizes, margins -- doesnt fix this either). I have tried so many methods...
Any thoughts on other things to try in Adobe Pro (or Word)?
EDIT: Here's an additional tidbit of info that may be the key to this... There's some kind of coding that is in the .doc that Adobe Pro converted from the source PDF that doesnt display in Word, but that is being seen by the translation programs....... I have no idea what these are, but I want to remove them!
Message was edited by: KaotikADC

I would suggest you look at the fonts that are being used. It may be a font issue that is not properly being read by the translation program.

Disappearing PDF file after saving work in Acrobat Pro 9?

I use Acrobat Pro 9 to do markups. Some of the files may be as large as 2,000 pages. At various points, I save my work. Sometimes, however, I save my work, close the program. I come back later and discover that the PDF file that I working seems to have vanished. It's not in Recyle Bin and searching for it, does not bring it up. There isn't even an icon. When this happens, all that remains are aabxxx 's in Recent Places. Sometimes if I am lucky, I can somehow generate another PDF file. Sometimes not.
I know that it is possible I could strike the wrong key and not save my work. But this has happened often where that something else be the reason.. I have looked for solutions to this problem in the past and have not been able to find any. I currently am using Windows 7 with IE9
Any ideas? Thanks.

Thank you for your help and suggestions. I put in the browser info, but I wasn't sure if that would be helpful. I have a lot of problems with IE9 and using Microsoft Word and Excel.. MS Office 2010 is 64-bit. The version of Windows 7 I have is 64-bit. What happened is that I began working for this one publisher, AA9 was the version in use and that was I was instructed to use It was also just before the release of AAX.
Do you think that the 32-bit/64-bit difference is what could be causing the issue?
I put off going to a new version because of the cost and the fact that I wouldn't have time to learn the current version. I have a lot of projects right now and scheduling is tight.

Hyperlinks in PDF fail when security turned on Acrobat Pro 6

Similar Messages

Maybe you are looking for