Hyperlinks in scrollable content slide out

Hi,
I would like to build a scrollable content slide out with hyperlinks that navigate to different pages in an article, to be used as an in article navigation.
However, I'm having problems to get the hyperlinks to work.
Any Ideas?
Kind regards
Tim
I'm using InDesign 5.5 on OSX 10.6.8 and the latest versions of the FolioPanel and FolioProducerTools

I've always found hyperlinks to be kind of wonky. I stick with buttons for this.
Bob

Similar Messages

  • Is there a way of jumping to a specific point in scrollable content?

    I have a list of values sub-divided by month in a scrollable content frame, i.e. -
    AUGUST
    Value1
    Value2
    Value3
    SEPTEMBER
    Value4
    Value5
    Value6
    Value7
    OCTOBER
    Value8
    ...and so on...
    If my reader wants to jump directly to January for example, it would be nice if they could just click a button(labelled 'January') and the scrollable content automatically jumps to the January values. Is this possible?
    Thanks.

    Bob Levine wrote:
    You want to continue to carry on like this, knock yourself out but you’re acting like child now.
    You were told the proper place to ask a DPS related question. You got the answer and you’re still going on about it.
    And yes, it is a nice system because technically you were not asking an InDesign question.
    Bob, your tone of reply is regularly dismissive and unprofessional and you're being completely unreasonable. It isn't as if I asked about scrollable content in the Photoshop forum - it is a perfectly legitimate feature of InDesign!
    Peter, if you don't know then answer, you don't have to reply to the question. Leave it to someone who does in the future. As for you 'always asking people for more information', how is 'You might want to tell us how this is an InDesign question...' helpful.

  • Problem with scrollable content in cs6

    hi out there
    well since i while i'm using the cs6 to create folios. now i have a problem i didn't have in cs5.5. if i create a scrollable content ("durchlaufbarer rahmen" in german) in the folio overlays i can't navigate on the area where this element ist placed. if i place a full screen scrollable content on one page and open the folio on the ipad i'm stuck at this page...
    ...hope someone out there knows a way to fix this problem.
    thanks - alex

    So there is a way to retain the PDF version of an article with this?
    I've tried adding an MSO over a scrolling area of text (separate from the frame, but still on top of it), and I've also tried placing it within the scrolling frame.
    Neither of these worked.
    Is there something I'm missing? What specifically allows this workaround to work? I'd love to include some full page scrolling content without making the viewer get stuck on one scrolling page in the middle of the document.

  • Slide out and drop down competition

    Hey everyone. I have been trying to find a solution to this for days, and yet can't figure it out. I have a menu that needs to slide out (horizontally, left to right) from behind an element that says menu. But then instead of the links taking you to the actual pages the content is dynamically loaded using ajax into a pane that drops down and is the width of the entire wrapper around the menu.
    I have uploaded the files to a testing site, here.
    I have got the slide out feature working just fine. However, the drop down doesn't show up. I have been checking in Firebug to see if it actually loads the content, and it does, but it is all invisible. I'm thinking it is more of a css problem than a javascript problem, but after a few days of trying different things I don't know.
    Any help would be appreciated. Thanks!

    Having content dropping down sounds like collapsible panels, but I'm not entirely sure how you want it all to function. I didn't see anything besides the slide out menus in Chrome. Should the content that 'drops down' disappear when another button is pressed? In that case, you might want to look at Tabbed Panels, too.
    If you think it is a CSS problem, work systematically through your stylesheet, turning off styles or attributes one at a time so you can see what affects what. You might be inadvertently keeping your content "off-screen" ... there but not there...
    Beth

  • Hyperlinks within scrollable frames

    I'm trying to get hyperlinks within a scrollable text frame to work but it's not working properly in the content viewer. Is it possible to do them within scrollable content, and if so, is there a certain technique that works best? Thanks!

    Sorry -- I've created a scrollable content layer that works properly, just with text scrolling down. I've selected the text and created a hyperlink using the hyperlinks panel (that works for the text in non-scrollable frames). When I view the issue in the Content Viewer on the iPad, the hyperlinks outside the scrollable frames work fine and open, but those within the scrollable frames do not. Is there a specific way I should be creating the hyperlinks within the scrollable frames that I'm not doing correctly? Thanks.

  • Setting a Conditional Action for Pre-Test questions: Skipping Content Slides

    OK boys and girls, let's see if this is even possible within one course SCO, or if this a multi-SCO solution (which means I'm toast, because we don't have the multi-SCO aggregator)?
    I want to set up a prescriptive pre-test. In my ideal world, answers to each individual question would either enable or disable the content slides connected to the question. If the user passes the pre-test, they could opt to skip the prescriptive stuff and complete the course. If the user fails the pretest, they would have to view the enabled content.
    Is this even possible in a single SCO world?
    Justenuf

    Jim belongs in that pantheon of good guys as well, so many here have pointed me in the right direction and helped me move forward with the capabilities of this software. And, in that spirit - here's my work around for the pretest/post test in a SCORM 1.2 environment:
    Created an entrance slide that allows opting totake the pretest or not - but only allows you to take it once.
    Created one test (take off the question x of x widget) split it and slide the content in between it. In this case, 10 questions with 5 in each set.
    Titled the first set of questions as a PreTest and the second set as a Post Test.
    Set my passing score at 4 correct. (the user only needs to get 4 out 5 on either set correct to pass - and I'm setting up an action that only allows the user to see the questions they missed if they fail the pretest.)
    Created variables for each "pretest" question and set them at 0. Created on Enter advanced actions on each slide following a question that toggled the variable to 1 if the question was answered correctly  if "CpQuizInfoLastSlidepointScored is equal to 1" then "Assign Question<x> with 1"
    Created an On Enter advanced action for each content area slide "Skip #" that allowed prescription:
    "If Question # is equal to 1 or cpQuizInfoPassFail is equal to 1, then Go to Next Slide"
    Only the content connected to the missed questions in the pretest is seen.
    Copied the same On Enter advanced action the Post test questions and renamed it "SkipPost #" that allowed prescription:
    "If Question # is equal to 1 or cpQuizInfoPassFail is equal to 1, then Go to Next Slide"
    Only the questions related to the reviewed content are seen
    The sum total of these activities is the following -
    The user can choose to take the pretest and complete the course by gettiong 4 or 5 questions correct and jump to the exit page.
         If the user takes the pretest and scores lower than 80%, the content for the missed questions is viewed and the user must answer the questions regarding
         that content. The user passes the course when he/she answers the fourth question correctly.
    The user can choose to view the content, take the post test and pass the course by answering 4 of 5 correctly.
    it's running right in preview, in web browser preview and on my LMS previewer, with one navigation error.
          the error: after failing the pretest, taking the prescribed content and anse wering the questions correctly, the course occasionally jumps to the results page
         and s displays a failure message, then freezes in place. it does NOT happen each time, which is why I am cy urrently scurrying back to my happy place to dwell
         on this mystery awhile.
    Justenuf

  • Dropping master slides onto content slides causes strange lock

    I'm having a Keynote problem that I haven't encountered before. Basically, after creating a new master slide and trying to drop it onto a content slide, Keynote locks my ability to work with the content slides at all.
    Odd thing of this is, editing masters still works fine. But the scroll bar for the content slides becomes a decoration, and clicking on the content slides does nothing. The keynote still 'plays', and I can get to content slides this way but can't change them.
    This is a very sudden behaviour that I've never seen before. I'd appreciate any ideas on whats happening with this. This is a new Keynote install due to a machine rebuild, so a preference setting may be the cause, or something less obvious.
    Feedback very much appreciated - I'm under the time gun, as it were.
    Jim

    Turns out that this was an update issue. I should have spotted that one right away.
    Problem solved, and thanks!

  • In the vertical page with scrollable content, i can´t swipe to next article. why?

    in the vertical version of the page with one scrollable content frame, i can´t swipe to next article. the scrollable content frame has in both versions the exact size of the page. in the horizontal version this works perfectly. Used folio builder v22, pdf and smothscrolling off.
    Message was edited by: lost in dps

    Thanks for the answer. But i found out, that it was my fault. A status of an object was outside the scrolling content frame. But thank you for the possibilty to ask questions.

  • 'Scrollable Content Region' - Region Template - Anybody used successfully?

    I have just implemented a "Data Load" function which is the OOTB page type in apex 4.2 which allows the end user to go through a wizard and import csv data into a table.
    When the user is viewing the data to be imported - they have to scroll across the length of the screen (depending on how many columns you are loading).
    I noticed there is a Region template called "Scrollable Content Region". I tried applying this template to my region, and when this didn't work, to a container region.
    The scrollbars appear (horizontally and vertically) but they are greyed out as the region is still at max width and you have to use the browser to scroll instead.
    I think this looks untidy as the header colour-styling ends, as well as other regions being stretched.
    Has anyone used this successfully before?
    Amanda.

    Hi Amanda,
    What I've done with this region is edit the template and change the style for the div.uRegionContent.  You'll see that it says "overflow: scroll", I change it to "overflow: auto", this way the scroll bars will only show when they are needed.
    The other useful thing is to remove the hardcoded height and define it on a per region basis.
    So, if my region ID (STATIC_REGION_ID) is empRegion then the height can be defined as:
    #empRegion > .uRegionContent {height: 600px;}
    Of course you could do this without modifying the region by adding !important.
    #empRegion > .uRegionContent {height: 600px!important; overflow: auto!important;}
    Hope this helps.
    Thanks
    -Jorge

  • Hyperlinks in scrollable frames

    Quick yes or no. Is this possible?

    Okay... bumping this up again with a pretty fundamental question: How do I do it?
    I made a button link to a URL and grouped it with the scrollable content group but nothing happens when the link is pressed.
    What am I doing wrong?
    EDIT. No worries, i figured it out.

  • I am using photos . I add a camera and make my photos slide in.  How do I add a second behavior to the photo to make it slide out.  I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

    I am using photos in Motion 5.  I add a camera and make my photo slide in.  How do i add a second behavior to the photo to make it slide out?  I want the photo to hold for a few seconds in between sliding in and sliding out.  When I am trying to do this  I am not getting the photo to hold, i am making one continuous motion which I do not want.
    Thanks

    Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

  • Suggestion for a possible iphone with slide out keyboard.

    I dont really know if there is a suggestion forum but i thought it would be neat if apple designed a iphone with a physical keyboard for those people who love to text. Apple could even run a internet pole to see what there customers would think i mean the iphone is top notch but i think having one with a slide out keyboard could possibly increase apples sales. Any who just thought id throw that out there and keep up the great work Apple.

    This is where you need to go with your suggestion: http://www.apple.com/feedback/iphone.html
    I would not hold my breath.

  • Can I add a hyperlink to a title slide in iMovie?

    Can I add a hyperlink to a title slide in iMovie? Any way to make a link "clickable"?
    Thanks!

    Not in iMovie. You could finish your movie in iMovie (all but this).
    Then,  you can add the link in QuickTime Pro version 7.
    First you need to install QuickTime Player Version 7 if you don't have it. QT7 and QT X can coexist on your Mac. Then buy the license key from Apple to convert it to QuickTime Pro.

  • How to insert a hyperlink in mail content for workflow

    Experts,
    I want to insert a hyperlink in mail content when i use sendmail type step in workflow.
    How to do it?
    Thanks you very much!

    Hi, Venkat
      Thanks you for your help!
      I try to use '<a href=''https://login.yahoo.com/config/login_verify2?&.src=ym''>Yahoo mail</a>' in the mail, but
      my outlook display the mail content is '<a href=''https://login.yahoo.com/config/login_verify2?&.src=ym''>Yahoo mail</a>',
      is not a hyperlink.
    Ken.Li

  • Problems with the Spry Content Slider Widget in DW6

    Hello there,
    I have been wrestling with a problem I'm having with the Spry Content Slider Widget that I hope someone has an answer for.
    I have 2 widgets on a page, but the problem I'm having occurs whether there is 1 or 2 on the page.
    No matter how many slides I have in the widget, it only shows the first 3. The 2 widgets per page occurs on every html page (9 in total.)
    In there a setting in the inline or linked .js code limiting the number of slides to 3?
    In addition to these widgets, I also use a DWUser_EasyRotator Slider on the pages, and both the easyRotator and Spry Widgets launch a fancyBox jQuery Gallery. Tho it's a possibility, I don't think the mixing of sliders/js is the problem, as I was having the problem with the Spry Widget showing only the first 3 upon the first insert of the Widget.
    Any suggestions on settings I should be aware of, as regards the Widget, would be greatly appreciated… (;

    On line 66 of your code, you have an extra </head> tag that doesn't belong.    Remove that and validate your code again. 
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gallerynumber9.com.au%2Findex ---778.html
    Nancy O.

Maybe you are looking for