Hyperlinks in SWF. Need some guidance, InDesign help's suggestions didn't work.

I have a file, which I have uploaded to dropbox. I want that file to open from dropbox when clicked on the hyperlink. The link doesn't work neither through hyperlink nor button action.
Also, I want another hyperlink to direct people to a blog, but as I said, non of the hyperlinks work.
How do I make them work or what other ways is there to overcome this problem smoothly?
The hyperlinks work just fine in swf preview mode.

Same question by same person: What do you want to hear differently? You did get some suggestion in your last post over the same exact question?
Oracle Cooperate Trainer Career as Oracle DBA

Similar Messages

First time using iDVD for slideshow, need some guidance

I want to make a dvd that consists of 3-6 slideshows, plus "extras". Each slideshow will have 50-150 photos, but the "extras" section I want to have all the photos (including some not used in the slideshows) for a total of about 1300 photos.
1. How do I get the photos not used in the slideshow in the "extras" section?
2. Can I put anything in the "drop zones"? or does everything just go in the "slideshow" section?
This is the first time I have ever used iDVD and could use any help or suggestions at all.....
thanks

Don't use over 99 images in a slideshow. You may have trouble:
http://docs.info.apple.com/article.html?artnum=302961
1. Just create a new extras slideshow menu from the main menu by using the + button and select Add Submenu. Then go there and add slideshows the same way, only select Add Slideshow and then drag your images in; or use the Import funtion.
2. Drop Zones are for single images/movies.
I think you need to spend some time learning how to do this, rather than guessing.
iDVD 6 Getting Started PDF download
Apple's iMovie Learning Site
Apple's iDVD Learning Site
iLife ’06 Multimedia Tutorials
General Learning Center
Ken Stone: Authoring in iDVD 6
My favorite, by far:
iMovie HD & iDVD 6: The Missing Manual
You can download Chapter four: Camcorder Meets Mac.
iPhoto 6: The Missing Manual

How do you access your .mac email from a PC? We migrated to icloud and need some guidance. Thanks.

We migrated our .mac email to icloud and need some help in accessing our email from a PC. Many thanks!

iCloud account not necessarily needs to be an Apple ID. Make sure, if you have both, to you enter the correct one.

I need some one to help me build a theme and a app for my restaurant

Ok so I have been working on a theme for my restaurant and I also want to do an app. For it I'm looking for someone that is willing to work on the with me I have no time but I got the theme pretty much done just need it to be able to get it to my phone and go from there
please hit me up if you want to make some cash and help me do this
From Kevin

Hi wildtoad and welcome to the BlackBerry Support Community Forums.
You can download the BlackBerry Theme Studio to create your theme and load it to your BlackBerry.
To download the Theme Studio visit http://na.blackberry.com/eng/services/themestudio/
Thank you and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I am lost and need some guidance

Please bear with me for being so explicit on my posting, but I don't have a simpler way. But need some ideas to create a simple, safe workflow that includes back up.
I only use my Int HD (350GB), to install and run Apps; otherwise, I use Ext HDs. I have approximate 150GB of images, and another 50 GB of misc. files.
I have the following Ext HD:
1- 2 TB FW/USB -got a great deal brand new
2- 1 TB FW/USB already in use. I have 1 Partition (250 GB) while I was using Tiger
I used it to create a Boot up Dr, backing up Apps. But no longer use it.
I have been having some difficulty with this drive; sometimes it doesn't get recognized or stays on. I will be replacing the electric power cord, and all cables.
I am not sure if I should invest the time to re-format the entire drive and eliminate the Partition or just leave untouched.
3- 500 GB USB - secondary copy (non-RAI)
4- 350 GB USB - third copy (off site)
I am trying to decide how to use these drives, and hopefully, without the need to re-formatting them, but who knows. In addition, I would like to take advantage of TM for my back up.
5 Which DR should I set up as my destination DR for TM?
If I use the 2 TB is it better to set as RAID 0,better performance but if one drive fails, I'd be SOL, right?
On the other hand RAID 1, the redundancy factor would increase overhead. Any suggestion.
I also use Lightroom and would like to know how I should set it up to back up LR (non-image).
And lastly, about TM can I be select a specific source files for back ups? And can I back up different source Drives?
Is there a way that I could prevent TM not to back up Cache, because it will increase the overhead
Again, any suggestion would be appreciated

crossover wrote:
I called Applecare yesterday and told me that TM only works with the Internal HD, no other DR, not sure about that. I usually get better answers here than wasting my time calling them, go figure.
That's just plain wrong. Some of them don't seem to know much about Time Machine except the basics (and, to be fair, most Mac users don't have data on external drives, so it likely doesn't come up much). But yes, TM will back-up any internal or directly-attached external USB or F/W drive/partition, as long as it's formatted Mac OS Extended. In fact, in most cases it will do that by default -- if you don't want something backed-up, you have to specifically exclude it.
I have never tried TM and not sure if that would be a good workflow or just use other Apps like the one you mentioned
There are advantages and disadvantages to TM, as with any other app. One of the main advantages of TM is the very fast, hourly, incremental backups of additions and changes. This gives you an excellent chance of recovering a previous version of something that was changed or deleted in error (such as "Save" instead of "Save as"), or somehow corrupted.
And there really isn't any workflow, once it's set up (which is also quite easy). TM just does it's thing.
First it does a full backup of everything on your system (less some caches, system workfiles, logs, trash, etc.). That, of course, is a lengthy process.
Thereafter, it will do an incremental backup hourly, as long as your Mac is awake and the external drive is attached.
It automatically "thins" your backups, including when the TM drive/partition gets near full, deleting the oldest backups to make room for new ones.

I need some all around help...

I'm brand new at linux, and I have been using Windows xp for years, so I have no clue what I'm doing. I'm all installed, and it works fine, no errors, but I need some tips on doing some stuff.
I am trying to mod my .bashrc to add color, as in the wiki, but it doesnt open the actual file. Instead, nano keeps wanting to create a new file from scratch. I went ahead and filled in a new one, but it does nothing, what do I need to do? Is the .bashrc under a different name in the directory?
Next question... I am using a windows laptop to do all my internet, etc stuff, and the arch box is separated from the internet. I'm using wireless, and the arch box doesn't have a card, so I cant get it on the web right now. I want to install a GUI, most likely kde, but I have no clue as to how to put stuff on the arch box. All I have availible for data transfer is a 4gb usb jump-drive, and it has all of the kde packages on it, but I'm not sure how to access them to install them.
Aaaand...... the last question... If possible, is there a command that will list the directories of the arch box, so I can see where I'm at and where things are; I havent the foggiest idea of how this thing is layed out, or where the usb drive would be in the directories.

Peeples Mcnasty wrote:Whenever I go to fill in the user's passwor, the box doesn't register the key-presses. It will only register non-letters. I'm still tryig to get to the bottom of it, so, until then I'm resorting to root as my login.
Can you rephrase that? I don't really understand what you mean by register. Are you aware that password prompts in general won't echo anything? So normally, when you enter your password, nothing will change on the screen but the password you just entered is there.
Now, if I had to create a .bashrc, where would I need to go to find out what all must go into it?
Nothing has to go in there . You don't even have to have one, it all depends on what you want. You can put aliases in there (see man alias), define functions and environment variables, set your prompt and lots of other stuff. If you want examples you can take a look at threads like this one. Some of this stuff might be a bit overwhelming, so perhaps you should leave that alone until you have your install completed . What are you referring to when you say "Add color" ?
Regarding your usb drive, notice that it won't be mounted automatically until you configure some kind of automount (KDE wil do that for you). Mounting means making your usb drive accessible at some directory in the filesystem. So to access your drive you do the following:
Plug in drive
mount /dev/sdb1 /mnt
Your usb drive doesn't have to be sdb1, if you have multiple harddisks in your box, those usually come first, so your first harddisk is sda, the second sdb and so on. sda1 is the first partition on the first harddisk, in most cases your usb drive will come after the disks, so if you have one harddisk your usb drive is usually sdb.
Then you can install kde like this:
First change to the dir with the packages, if you put them in some subdirectory just hang that behind mnt/:
cd /mnt/
use ls to see if they are there. If that is the case copy them into your pkgcache.
* will choose everything in that directory, if there is something other than packages, you should choose the packages to copy by hand
cp * /var/cache/pacman/pkg
after that you can use pacman to install the kde group:
pacman -S kde
There might be some (or in case of kde probably many) dependencies which you didn't put on your usb drive. Pacman will tell you if there are. To get a list of urls to download those you can use
pacman -Sp kde
Good luck
I just refreshed Regarding pacman -U, pacman -U won't install dependencies automatically and will just stop if a dependency is missing, so if you use pacman -U to install packages with dependencies you will have to resolve those by hand and install them with --asdeps.

I don't know what camara is it, and i need to use it with xp and didn't work

hi, i need help!!! i don't know exactly the model of the webcam, the cd said that is video blaster webcam, but y could't find it anywear, mi camera is this http://www.search4hardware.com/Images/tblDigitalCamera/Creative%20Video%20Blaster%20WebCam.jpg
my uncle used this camera on windows 95, know y have win xp and i can't make to work!!!
please some who could help me!!
martin._

Duplicate post.
Jason

Need some guidance, advice on AS for a video menu im designing

Hi all,
I consider myself a well versed professional in terms of design layout in Photoshop, to Iillustrator, and InDesign. I have just begun to pick up Flash cs3 and have had no problem laying out elements and so on. I understand the timeline, since I do allot of video editingfrom FinalCut to AfterEffects. However what is new and alien to me is ActionScripting I don't know what is best 2.0 or 3.0. I have tried some tutorials in drop menus and so on. yet I'm having issues across the board as to what process to build this video menu page. (see photo below)
The function of this menu is that you roll over a green title and a menu drops along side of it, then you roll your mouse courser over the sub menu and click on a sub menu title and a video starts. I believe the functions to be easy and straight forward. yet action script puzzles me. is there a site for beginners or tutorials in just menus like this i could copy and use while i pick up action script whatever. or if anyone has simple code ideas to put or drop in said Key Frames or Layers (see photo below)
any help guidance would be soooo appreciated.
thanks
Rastenis
Set,Illustration, Graphic Designer

there are lots of flash tutorials. use google to search.
however, if you're not, at least aquainted with some oop language, you're in for a steep learning curve trying to create a dropdown menu using actionscript.
if you don't need any of the as3 features, use as2. it's easier to learn. although, if you plan to do more flash, you might want to skip as2 and learn as3.
for your tutorial use: flash as2 dropdown menu tutorial

In a bit of a pickle and I need some guidance...

I'm what you call a "Jack of all trades, Master of none". I've dabled in technology since I was a kid, but have never taken any formal classes or had any training on anything. I learned how to use Photoshop, Fireworks and Dreamweaver on my own over the years. Pretty much one of those trial and error kind of guy, but it has opened up many opportunities for me.
Well, the company I work for recently decided to do some advertising at a local horse race track. One of the ways we'll be advertising our business there is on a 20 ft. tall by 40 ft. long billboard. Knowing that I've done some print advertising for them in the past, they asked me if I could come up with something to have printed to put on the billboard and of course I took on the challenge.
I already have the perfect idea in mind for the billboard and all I need to do is implement it. The only problem I have is that I've never had to make something for that big of print. So my question is, should I be using InDesign CS6 for this, or is this something I should use Photoshop CS6 for?
If someone could point me in the right direction I would really appreciated. The worst part is that I need to have this done ASAP as the racing season starts on Monday.
Any help will be greatly appreciated.
Thank you,
Roberto

You will absolutely want to contact the billboard company to find out the technical specifications. After having worked at an outdoor advertising company, I can share a few tips with you.... Scale is a tough question to answer because some companies use a 1 ft = 1 in. scale and others have a different scaling method. Some will provide templates either in PDF format or in all of the programs they work with. Try checking the printer's website, if there's no info, you'll want to get in touch by phone - which is usually a good idea the first time you work with a printer anyway.
Most companies will accept all the major file types: PDF, EPS & JPG included, but you want to make sure before you get too far into the project. Sounds like you have an idea in mind, so what I really wanted to mention to you was that billboards are unique design-wise. You'll want to keep in mind that you only have about five seconds to get your message across and it needs to very legible. If the sign is lit, then you want to make sure to use a color combo that will work well both day and night, and in different lighting conditions in between. Certain color combinations work better than others as do some fonts. As Peter mentioned, billboards are sometimes produced in panels. You will want to know whether the billboard you are designing for is going to be produced in panels or in one vinyl sheet. Back at the company I worked for (keep in mind this was quite a few years back), the cost of the billboard was affected by how many colors were used in each panel of the billboard, so this may be a good question to check on as well.
For some good tips on design and to get an idea of the types of specifications you'll be dealing with (but again, be sure to ask YOUR printer for their specs), take a look at these two links from Lamar Graphics. I don't have any connection with the company, but they are all over the U.S. so they are a good starting reference point.
http://www.lamaroutdoor.com/
Go to Creative Lab->Everyone is an Artist for some great hints about colors, graphics and fonts to use in billboard design.
For some examples of technical specifications, look at this part of their website:
http://www.lamargraphics.com/lgweb/LG2k8/LG2k8-Plants.aspx

GP and WD with Adobe Interactive form question - need some guidance.

Hello experts,
FYI, I'm running ECC 5.0 Support Stack 9, EP 7.0 SPS 11, NWDS 2.0.9_15 with Adobe Livecyle Designer.
I am slightly stuck with what I'm trying to do. I have created a web dynpro application that has an Adobe interactive form. I'm trying to use guided procedures to initiate a process so that this interactive form can be filled out and submitted to an approver. I need the relevant parties to receive a notification email. I have setup email templates and services, I just need to know how it will fit into the process. Once approved in the process, a BAPI should be invoked to populate some fields in the form. Should I be creating the Web Dynpro application to invoke the bapi or should a guided procedure callable object invoke the bapi? I know how to do these things, but I dont know which method I should use, in order to correctly have this process flow from point A - point B. Should the process appear in the Universal Worklist? If not, why not? Will it only appear in the GP runtime? I have pretty much read thru most of the tutorials but still cannot get this GP stuff to work as a WHOLE process.
Any guidance, suggestions, possible solutions will be greatly appreciated.
Thanks
Kunal.

Hi,
It seems you have not activated the Composite Form object. Only after activation you will be able to use it to create a Callable Object of type composite form.
Hope this helps,
Ashutosh

An idea to edit my MP3s... Need some guidance

I know I know and I already searched the topic extensively... But maybe I'm googling the wrong stuff. Anywho, here we go.
I want to create a small app (no gui) that runs through my MP3 directory and takes each file name (i.e. artist name - song title.mp3) and sets the "ARTIST" and "SONG TITLE" id3 tags according to the filename and clear out any of the other fields. I just hate having all my songs on my MP3 player not displaying correctly. I have too many to do it individually so I figured I could wing it myself.
Here's my plan...
- App will cycle through a specified directory.
- It will grab each file (only MP3s are in there, no need for specification) and tokenize the filename. I've done tokenizing before and that shouldn't be a problem.
- Based on the tokenizing take what is before the - (dash) and put that in the "ARTIST" field in the id3 tag. Then what is after the - (dash) put in the "SONG TITLE" field in the id3 tag. Naturally I will cut off the .mp3 extension.
So really I need to know how to do 2 things and I searched for the first one. I need to learn how to cycle through a directory and grab each file and handle it somehow. I can probably manage that, but cycling is the problem. I googled this and came up short handed.
The second thing is I need to know how to edit and alter the id3 tags in an MP3. I'm sure I can figure this out eventually. Since its much later in my application I haven't yet looked around yet on this. I'm not asking for help on this but if you know of a valuable resource for some references on how to tackle this please inform me.
Any guidance?

To get the file names, look into the methods of the File class. Some provide arrays as output.
To split/parse the file names, use methods from the String class.
This site has numerous examples, some probably apply:
http://javaalmanac.com/

New to Mac and to video editing...need some guidance, please

I've decided to make the switch and ordered a new 3Ghz 24" iMac. I chose a 1TB HD and 4G of RAM.
I want to do some photo and video editing (nothing professional, simply vacation photos and video). I'll be purchasing an HD camcorder later this year to replace my current one (non-HD). I currently have about 5000 photos and about 50 hours of unedited DV on DV tapes to begin to work with.
Any suggestions on the following would be much appreciated:
1. Back-up: Should I use a 1GB Time Capsule or a 1 GB GTECH drive with Time Machine? I should mention that I plan on purchasing a MB or MBP later this year. Can I use a GTech HD as a NAS-like drive for both the iMac and the notebook?
2. Should I partition the internal HD?
3. Should I use a 'scratch disk' for video editing? If so, any suggestions for a particular size or model?
4. Any suggestions for ease of transfer of my data from my PC (photos, iTunes library, mail, IE favorites, etc.)?
5. Anything else you would suggest for a new Mac user?
Thanks very much for the help!!!

Hi there.
First, a couple of websites to help you on your way (and Welcome to the Mac!)
http://www.apple.com/support/mac101/
And also
http://www.apple.com/support/leopard/
Now, as for your questions, these are just IMHO:
Backup - get BOTH the capsule and a separate HD. If you can only get one, personally I would get the non-TB disk so that I can drag the video files that I want onto it. the Capsule might backup other stuff (and slowly compared to the straight drive; get a FW 800 drive if you can, if not then FW 400 at least). I also think you meant TB not GB! Just make sure the DISK is from a good vendor (Seagate, Hitachi or Western Digital).
Partition - Nope; wastes space; you need contiguous space from my experience. Only do that if you really need to run Windows via Boot Camp (not recommended to run Windows at all!)
Scratch disk is absolutely recommended. Get the largest size one you can afford and separate out this from your backup disk. (Worst case, use a bit of the scratch disk as your backup, but also keep the same work files on your main hard disk so you at least have a physical duplicate somewhere). Yup, hard disks are gonna add up!
The above websites have some tips on transferring content from PCs; generally you can just burn stuff onto DVD and import them onto the Mac. That's pretty straight forward.
Suggestions IMHO - forget the Mighty Mouse and get another quality two button mouse. Also consider a Kensington Trackball. Get AppleCare warranty for all your hardware (for peace of mind). Triple check that your camcorder will be supported by iMovie '08. It might not be by Final Cut but at least you can get the files from iMovie into Final Cut. But Final Cut does support quite a lot of them already.
Introduce 10 other Windows people to the Mac. (This is what we do).
Cheers!

Really need some !!HELP!! ALMOST 6 MONTHS WITH OUT BURNING A CD

I've posted before about my problem but but i still have not gotten an answer. This might be my last atempt to get any help before i end up taking my laptop to a repair shop so here we go.
I've recently ran a diagnostic with i tunes and here it is:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
TOSHIBA Satellite A75
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), ASAPIW2K (6.0.2.0), Pfc (2.5.0.204), MxlW2k (1.1.0.120), sscdbhk5 (1.0.0.1), Cdr4_xp (6.2.0.132),
UpperFilters: CDRDRV (6.0.0.0), Cdralw2k (6.2.0.132), GEARAspiWDM (2.0.4.3),
Video Driver: ATI MOBILITY RADEON 9000 IGP\ATI MOBILITY RADEON 9000 IGP
IDE\DiskFUJITSUMHU2100AT______________________00000008
Could not get bus type for CD, 50. Problem with installation of drive in Windows.
, Bus Address [0,0]
IDE\CdRomMATSHITADVD-RAM_UJ-820S________________1.50___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomVOBID__InstantDrive_CD_14_, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: MATSHITA DVD-RAM UJ-820S, Rev 1.50
Audio CD in drive.
Found 11 songs on CD, playing time 33:12 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:20:15
Track 3, start time 05:07:42
Track 4, start time 06:13:12
Track 5, start time 08:31:30
Track 6, start time 13:17:17
Track 7, start time 17:34:35
Track 8, start time 20:47:57
Track 9, start time 23:22:25
Track 10, start time 25:16:60
Track 11, start time 28:56:22
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4 8 12.
The drive DVDRW speeds are: 4 8 12.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
it apears to be something wrong with drive E but in the properties it says its working perfectly.
Every time i try to burn a cd i get the blue screen error.
i hade version 7 of i tunes kept getting the same thing, so i went back to 5.3 but still the same thing. It also happens when i try to burn a cd with nero, i have WMP but don't use it. so now i really hope to get an answer or i have no other choice but to take it to a repair shop. SO !!PLEASE HELP ME!!

no problems about the delay.
the 0x8E is reasonably generic. so let's try proceeding on two fronts.
1st front: we'll get a minidump to the Apple Engineers for a look
(the minidump can help identify the driver that seems to be causing the issue here.)
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing
2nd front: checking on a few possibilities ourselves while waiting for feedback on the minidump
(a) device filter conflicts: blue screens with itunes while burning can be caused by device filter conflicts (i've seen 0x8Es before in cases of conflicts with old Roxio products). so perhaps try the techniques from the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters
(b) malware:
malware is a known cause of 0x8Es. try downloading fresh definitions and running vigorous virus and spyware scans. if your security software providers offer them, try running online scans too. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
if your security software providers don't offer online scans, try running the Symantec online virus check. (apologies in advance ... it takes an eternity to complete.)
Symantec Security Check

I need some legacy OS help. Resource and File Manager stuff...

I don't know where to find a better place to ask this and I know that it will strain your memory, but I really am in need of help.
I am working on a Windows port of the old and now defunct SpriteWorld animation library. I used to be involved in its development when I had a Mac several years ago, and I really enjoyed toying with it. I am aware of SpriteWorld X, but I don't like C++ and I want to do this for myself.
Anyway, the coding of the actual project will be trivial. What I need help with are the dozens of resource files that contain all of the graphics used by the examples. Since I'm doing this in Windows, I cannot simply open the resource files in ResEdit or even in code very easily. What I'm trying to do is extract the PICT and cicn resources in the files. I did find the legacy documentation on Apple's developer site and I have studied it thoroughly. However, the Resource Manager documentation leaves out a great many details and is making it nearly impossible to parse the files.
The biggest issue that I'm having is finding the exact starting point in the file for the resource fork. What I've noticed is that there seems to be an undocumented and nearly identical header, containing the file name, creator, file type and unknown data of unknown length, in all of the files that I've viewed. Since this header is not documented, it makes it very difficult to find the start of the fork. I'm guessing that it is used by the Finder?
I was able to manually find the start(I think...), since a copy resource fork header is 30 bytes prior to the first resource type listed in the file. Per the documentation, this is merely a copy and the actual header is further up in the file. I've found that, but many times the offsets are wrong. All of the offsets start at the beginning of the resource fork, which unfortunately, does not start at the first byte in the file. To make it even more difficult, most of the time the real header (and thus the fork) starts 82 bytes in, but not always and there doesn't seem to be any reason for the discrepancy. Even when I'm sure of the location of the start of the fork, the offsets in the header often times will point to random data in the file instead of the correct locations. I don't know if the files are corrupted or if there is more information that I'm missing.
Without being able to decipher the resource fork structure, there is no way that I can write the utility I need to extract the data. I know that I'm asking for help with VERY old data, but I'm not sure where else to turn. If I could afford it, I would just go out and buy a Mac. Unfortunately, that is not an option. I've searched just about as far as I can with Google, but to no avail. I wouldn't post this, but I've simply exhausted all other avenues. I sure hope someone can shed some light on this matter.
Message was edited by: Mark_Speir

If you get really stuck, you might find a helpful soul that might be willing to generate screen captures or otherwise de-rez the files for you. I've never gotten around to figuring out a way to dump the graphics directly from the resource forks, however, I do happen to have several legacy Macs still running on my home network, as well as some earlier OSX versions.
Currently:
Powerbook G4 (2), OSX 10.5.8, and 10.4.11
iMac G4, OSX 10.3.9
PowerMac 8600, OS 9.2
PowerMac 8500 (2), OS 8.x, OSX 10.1 Server
Mac IIci, OS 8.x or 7.x (have to check)
Mac LC III, OS 7.x or 8.x (currently powerd off, but can be resurrected, used for terminal emulator
(I've made use of these myself to get screen captures, and extract sound resources via ResEdit or Resorcerer for my own port of some legacy software).

Old Homesite user needs some CS3 customizing help

Thanks for taking a look,
Well I finally got CS3 after using HS5.1 for the last 7 or 10 years! It is fantastic! So far so good though it is taking some getting used to...
I was hoping that someone could be so kind to help me with a couple things, I would be greatly appreciative to say the least.
First, How do I customize the toolbars? I was able to add things to all the toolbars before so was wondering if there's similar customizability in Dreamweaver. I saw a favorites tab but can I add the 12 or so buttons I use alot in there and then have that as the default tab on opening?
I used to select text and then (using a custom toolbar button/shortcut) click the div tag. I am not sure how to use the new one because it only has id or class and create new css style where I'm used to writing a style attribute/tag - (sorry if my nomenclature is off) in there myself.
I really like the new view as you go. How do you make it so when looking in design half or full the images are not in a 'selected' type state or does that mean something?
Lastly, I used to have a keyboard shortcut to do a number of things like blockquote and change case to upper or lower. I cannot find any of those! Where oh where (Brother Where Art Though) can they be?
Thanks again in advance for your help!

Hello,
You can save a work space after setting it up or customising it to your needs: window > workpace layout > new workspace..
On the right side, open the panel for css styles (or under window). This panel has another window for properties under it and on the statusbar of that little panel is + sign. Click on it to make a new rule. You can also right click the last css rule and then click "Edit" to go in to the css selector/properties applet or you can opt to open the css file and write the rules directly..usually you will have a tab also for the css file at the top.
You can go to: http://www.adobe.com/designcenter/video_workshop/ ( click on products | select a title | play video )
Adobe does not leave you up the creek without a paddle!
zabberwan

Hyperlinks in SWF. Need some guidance, InDesign help's suggestions didn't work.

Similar Messages

Maybe you are looking for