Hyperlinks not closing out in RH

Here's another odd behavior:
When I bring my FM book into RH, my hyperlinks are not closed
out in the converted content in RH. In FM, the hyperlinks are
correctly inserted using the gotolink and newlink Hypertext
markers. Yet in RH, the rest of the sentence in which the hyperlink
appears is also erroneously tagged as part of the hyperlink.
Is this is a bug? Has anyone else seen this behavior and if
so, how did you fix it?

Hello Michael,
This is not an issue, you'd always get the hyperlinks
appearing corrcetly without any tagging in the Design view of RH.
Just try to close and reopen the topic in the Design view or try to
view it in preview - it shoudl appear correctly.
Regards,
Pooja

Similar Messages

My I pad is not closing out of Facebook and other apps. I have to turn it off to close them

I am having trouble closing out of face book and other apps. My I pad is two years old . I have to turn it off to go into another page.

You cannot remove the software update notification. It will not go away. If you have the iPad2, you can update the device to iOS 6.0.1. It is your choice to not update, but you cannot remove the update notification.

IWeb hyperlinks not coming out right when published

Hiya,
Has anyone got any idea why hyperlinks (to other of my pages) on some of my web pages come out as a blue square with a question mark in the middle, rather than the name of the link? If you click on it, it takes you to the right page, but you can't read what the link says. It means I can navigate around the site but no one else can!
Many thanks for any replies on how to fix...
Rose

I see what you mean. When that page is viewed in the Activity window there are a number of items that are using the following URL for their location:
archive:%20artsfiles/shapeimage_1_link0.png
with the resulting error message: Unsupported URL.
Those items that are correct have the following URL:
http://web.me.com/roseskelton/iWeb/Site/Archive%3A%20artsfiles/navbar_1normal.png
Are you using a text based hyperlink for those or an image? If an image how are you adding it to iWeb?
You may have to delete those items and create them again from the beginning.

IDVD6 burning but not closing out disc?

I am still perplexed as to why iDVD 6 is burning discs that Titanium Toast 6 finds defective for copying purposes. The toast dialogue box reads "The content on disc to be copied cannot be unmounted. All open files and programs on this volume must be closed first." So I quit Toast and opened the iDVD 6 burned disc on my desktop, the VIDEO_TS folder contains 9 items, while the AUDIO_TS folder contains NO items. I immeditely removed the DVD, and replaced it with another disc I burned with iDVD 6 last month and also have not been able to copy. That disc showed up exactly the same.. the VIDEO_TS folder contains 9 items, while the AUDIO_TS folder contains NO items. Is this normal, or could it point to the problem? These are the only 2 projects that I've created with iDVD 6. In both instances I mastered my fcp project to MiniDv tape> redigitized that tape into iMovieHD (careful not to use HD settings) and then moved the finished iMovie project directly to iDVD from within the iMovieHD app. I am stuck with burning in iDVD because it is the only one of my 3 DVD encoders that I understand well enough to design something that looks good.
Thanks for your help... John

Is this normal, or could it point to the problem?
Yes. The audio folder is normally empty anyway.
Have no idea why toast won't burn additional copies for you but try this:
drag and drop these 2 items to the trash (empty the trash) and restart your mac)
com.apple.iDVD.plist
com.roxio.Toast.plist
Also, repair permissions using apple's disc utilities for main HD.
Good luck.

Just finished using iTunes, closed out and then tried to get back in. Got this message "he iTunes library .itl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back into iTunes ?

I just finished using iTunes, closed out and then tried to get ack in. Got this message "The iTunes library .9tl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back ino iTunes ?

I actually figured it out...I had to go to the iTunes Library Extras.itdb file and give myself permission to have full control. THEN, I could go and estore a previos version. Once I had done this, I got the same message for iTunes Library Genius.itdb . . . I did the same thing with it and Voila'!!
Hope this helps...
SVT

HT5622 My wife and I shared an Apple ID, have closed out iTunes on her iPhone and iPad but will not allow her email address to be associated with a new account even though it does not appear anywhere in my information. Any suggestions.

My wife and I shared an Apple ID, I have closed out the iTunes on her iPhone and her iPad. While trying to set up a new iTunes account when I enter her email address it says we have to select a new email address. I have checked and her email is not associated with my iTunes account and really do not want to establish another email account. Any suggestions?

Hi Stateler74,
Thanks for using Apple Support Communities. You might be able to find the Apple ID that her email address is associated with by following this article's instructions:
Apple ID: Finding your Apple ID
http://support.apple.com/kb/HT5625
Cheers,
- Ari

Firefox claims that it is already running and will not let me start a new session after closing out

I've been having this problem intermittently on both my Dell XPS 8000 and my HP nx7400 laptop. The Dell is running the latest version of Windows 7 Pro and the HP is running XP Pro (fully updated). After closing out of a Firefox session and running other apps, Firefox will not let me initiate another session, saying that "Firefox is already running... Please close the session..." That's not an exact quote, but you get the idea. CTRL-ALT-DEL and all other conventional means don't work and I am forced to reboot the system. This is a royal pain.. and I need some pain relief! Any suggestions? I may revert to an earlier version of Firefox until I see a solution... can't hurt, but I really like 4.0 and I don't look at going backwards as "progress."
Thanks.
Tom

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem:
***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

AS Java sessions are not closed until they time out

Hello Experts,
we have a SAP PI system to integrate SAP R/3 with external applications and recently we are facing a problem with inactive sessions. There's a new application we are setting up that consumes a webservice published by this SAP PI system. The scenario is SOAP --> PI --> PROXY. What we have noticed is that when the application sends loads of requests sometimes the system fails. This is because we are reaching the maximum number of open sessions in AS Java (1000). Investigating a bit more we found out that the sessions are not "closed" once the communication between the application and SAP PI has finished. Those sessions are open until they are automatically timed-out by the system after 1800 sec.
We have found the notes below in SAPNet:
Note 1363751 - ICM: Java Web sessions are not terminated
Note 1307940 - New HTTP session opened for every web service call
However, none of them are applicable to our system because it is more updated:
SAP PI 7.1 EHP1 SP002
Kernel Patch Level: 87
We have tried to close connections from the application that consumes the webservice but with no success. The sessions remain in the server until they are timed-out. Could you please tell us if this is the normal behavior of an AS Java system? Is this the way it should work? If so, can you tell us how to decrease this timeout so the inactive sessions are cleaned faster? We tried to find it but we didn't manage. Is there any way to close the session once the communication has finished?
Thank you in advance.
Roger Allué i Vall

Hi Roger,
You can do the following things to help solving your issue:
1. Decrease session timeout default value of the web container: Use the NetWeaver Administrator
Open Application Modules plugin within NWA
Configuration Management -> Infrastructure -> Application Modules
Set the desired timeout web module you are using, in minutes.
The default value 0 in the NWA means that the value is not modified
and the default value of 30 minutes timeout will be used.
2. Increase the max. no. of Sessions in Configtool
The max. number of Sessions can be set in Configtool in the Expert
mode. There is no limitation for the parameter.
Thanks,
Anderson

Database connection not closing on time out

Hi All,
Not sure if this is the right place for this question but..
I've moved my app (built using jdev10.1.2., adf bc's and jsp's) to an app server. For some reason, the database connection is not closing. I have 46 connections to the database and I''m the only one with the URL, not good.
So can anyone shed any light on this? I thought it should disconnect after a time out but its not.
Any ideas would be gratfully received.
Thanks in advance

or try this one..
Go to the bottom of the tutorial, you will find the configuration...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc9baf90-0201-0010-479a-b49b25598ebf

IE11 Shows :Program not responding, on Desktop, after IE File is closed out

Hi, I am looking for help with this odd problem and cannot find any other question like it.
My PC has Windows 7 64bit installed on HP pavilion g7 notebook. I use 32 bit browser I mostly go to in private as I have to erase all Temp internet files manually.(Different problem)
  I always open IE , not in private first, and again before I close out to insure some needed      files are in temp internet files. I have done this for 3 years as this PC has a quirk and am
telling this just so you have all information. Still EI will close out, as below, no matter what!
After IE 11 update KB2962872 IE works well but very often after closing out IE file a message appears on my Desktop saying that the program is not responding....looks for solution.....then says to close out IE. But I had already closed it out???? The
message takes 1 to 3 seconds to appear on my Desktop. Makes no sense and I have tried many things. Tried a compatibility       trouble-shooter and when I give the file for IE it said this program cannot be tested.
IE does not show up in Programs and Files , from my control panel?
Event viewer shows Error:
Faulty Application name: IEXPLORER.EXE, version:11.0.9600.17207,time stamp:0x53a20c50
Faulty module name:MSHTML.dll, version:11.0.9600.17207
Execution code: 0xc0000005
Faulty offset: 0x00482d4f
Faulty process id: 0x18eo
Faulty application start time: 0x01cf9df2ac176a84
Faulty application path: C\: Program Files (x86)\ Internet Explorer\ IEXPLORE.EXE                  Faulty module path: C:\Windows\system32\MSHTML.dll
Action center shows this problem and thus my performance is about 2 on 10.
Thank you very much for looking at my question.

Hello Picpansnap & Rob,
I encountered a similar problem, as Picpansnap did "After IE 11 update KB2962872 IE works well but very often after closing out IE file a message appears on my Desktop saying that the program is not responding....looks for solution.....then
says to close out IE." This happens now every time I open IE.
I agree Rob that this is likely a 3rd party add-on problem. In my case I tried the consumer solutions 1st. I myself did try all the recommended solutions and even ran the good old fixit tool. However I was not ever able to get to Tools>Internet
Options>Advanced as my browser would crash shortly after opening. This became very frustrating so being an IT professional myself, I of course came to technet to check the forums. KB2962872 is a recent update at the time of this writing and as such
the consumer site may not quite be aware of the need for an advanced solution as of yet. Picpansnap showed some advanced level understanding by sending an event viewer output, it was the similarities between his output and mine as well as your mention
of 3rd party add-on's that prompted me to remember another method to turn them off as I had tried Tools>Internet Options>Advanced unsuccessfully due to the quick crashing of newly opened IE page.
I remembered how to diagnose an individual IE add-on so I opened internet properties and from the program tab clicked the manage add-on button and proceeded to disable all IE add-on's and bring them up one by one to see which one was the culprit. In my case
it was the avast online security add-on that was the cause. With that add-on disabled Internet Explorer is now working fine. I have a subscription to avast internet security and am passing on this information to them as well as to http://answers.microsoft.com
I would like to wholeheartedly thank both of you for providing me with the clues to get my own IE working again. I had just performed a re-install of Windows 8 due to AMD's 14.4 driver hosing my USB, sound & DVD drive. I was able to get the sound &
DVD working again without the re-install but after spending hours in forums and trying solutions I was left with the re-install & update all the way back to Win 8.1 as my only option (recovery image was on external USB drive , of course). That was a battle
and I really do appreciate the posts here in technet where many problems with Microsoft programs are resolved 1st. I usually am a reader only & this will be my 1st post, I hope this can help others with similar issues.
Chuck ;)

Display the code but closed out of battery and I do not think I saw him get?

Display the code but closed out of battery and I do not think I saw him get?

reed code

Advanced edit hyperlink-properties grayed out the first time

advanced edit hyperlink-properties grayed out the first time
Sub Problem:
When using the advanced edit cursor, right click Is used to select a hyperlink-properties the first time the dialog box pops up it does not have “focus” (not sure that is the right term, but the box is grayed out and will not respond to the keyboard.). It must be mouse clicked to get focus. The second time a link is right clicked to properties the popup responds to the key board and will move to the action tab with ctrl-tab
It’s not clear to me where the acrobat program is at that point.
Is that a known action or problem with acrobat pro 9.4.4?
Is there a key or keys from the keyboard that can force focus to the box?
The problem is each file I open I have to manually find a link and right click it to get the box then click in the box to get “focus”. After the first one the box pops up with focus.
John
Main Problem:
I have been working on converting a set of pdf files with 1000’s of hyperlinks like www.site.com\folder1\file1.pdf#page=10
To jump to a local copy of the files with a relative type link
../folder1/file1.pdf and then go to the proper page.
I have found that it can be done manually by changing the hyperlink to a javascript
var otherDoc = app.openDoc('../folder1/file1.pdf', this);otherDoc.pageNum = 10 - 1;
and setting each destination file with a disclose()=true;
Based on the help so far that java script cannot access the hyperlink value in a link
See: http://forums.adobe.com/thread/1039908?tstart=60
I have resorted to the following plan using acrobat javascript, an external keyboard macro recorder and excel in combination to get around the problem
Four folder level acrobat javascripts with “buttons”
One to get all the link quads in an array, in the pdf and report the total number
The second creates a form field in the far corner of the first page and moves there.
The third jumps to each link found by creating a form field just to the left of the link and zooms in so it can be selected by a “mouse click” from the keyboard macro recorder
The forth deletes the form field
The keyboard macro recorder runs javascript 2 and then 3 then clicks on the link just to the right of the middle of the screen and uses keys to get to the advanced editing to get to edit the hyperlink .
The hyperlink is then copied to excel where it is converted using string functions to the needed javascript text to be copied back.
To the acrobat file into a java script (after deleting the hyperlink)
Rinse/lather/repeat
I have been able to convert about 150 links an hour.
Better then hand typing, but not like having java access to the links.
I am looking to improve the solution

Rick,
I didn't intend to say you must close the X box after each
apply. It's OK to apply one change and go to another item before
closing the dialogue. It's the OK button that messes up sometimes.
Even when you hit the Apply button for a very large selection
of topics, the OK button sometimes will undo the apply, not
necessarily for all selected topics. Even when you've made just one
batch change.
I think it's because OK tries to re-set all settings (that's
why it takes forever), but does not correctly pick up the mass
changes previously applied. Or maybe it takes forever because it
can't find the new info and defaults to the existing settings.
A pain in the butt when you're trying to apply a stylesheet
to a very large number of topics. Please don't ask me to define "a
large number."
Maybe it's a space limit in RH, similar to the space limit
for the number of characters in a batch of file names you want to
import. Or maybe the OK button doesn't look in the right places.
Harvey

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Phone Freezes up when Closing out multiple Apps in Multitasking toolbar.

Hello World...umm.. I am not sure if anyone else is experiencing this but every since I have upgraded to os 4 on my 3G S... whenever I proceed to close apps out of my multitask toolbar after the 4th app closed in a row my phone COMPLETELY LOCKS UP! Unresponsive mode major. I hold the lock button to turn it off and nothing happens I keep pressing the home button and nothing happens. It just freezes in the toolbar but the apps are still wiggling? Anyone might have heard whats going on with this? I have to hold my lock button and home button to reset it and reboot to resume usage of my phone. Thanks...

This happens to me also. I think it's a bug in the software
It happened on my 3GS and also happens on my iPhone 4.
It doesn't only happen when closing out of the 4th or 5th app, sometimes it happens to me on the first app or just at random times. It takes about 2 minutes for the phone to unfreeze, or you can simply restart it.
Apple needs to fix this, and also recall these iPhone 4s because of the antenna issue they're refusing to accept.

2nd Document window not closing

I have 2 Document windows,
- win1 is parent window.
- win2 is a small window with 3 display fields
and 2 buttons OK & Cancel.
- other setting for 'win2' is
Modal = 'YES'
Close Allowed = 'YES'
i have problem with Cancel button code, i am giving
if :SYSTEM.EVENT_WINDOW = 'WIN2' then
GO_ITEM('CTRL.FLD5');
HIDE_Window('WIN2');
end if;
The WIN2 is not closing,
i am calling this 'WIN2' from a WVI trigger of a field on parent window 'win1'
by issuing SHow_WINDOW('win2') command.
but it flashes error FRM-40737: illegal restricted Procedure SET_WINDOW_PROPERTY in WVI trigger.
Any one please suggest. TY.

hi Sarah,
i dont to know to which item's WVI should i atttach this code.
Since the window Closed_Allowed property is set "yes".
the same code given at Form-level When-Widow-Closed, works well, closes the window in 1 click.
but i dont know the same code given for Cancel button, does not close 'win2',
One more point, first time when win2 is shown, that time, out of the [x] button on the status bar &
Cancel button on win2, if i use [x] button first, then 'win2' closes and cursor is back in CTRL.FLD5 on 'win1', fair enough.
then afterwards from CTRL.FLD5 when 'win2' is called again then the Cancel button code works fine just like the [x] button.
but the question is why not first time, if i choose Cancel button first. why it is required [x] button to be used first.
So the problems are;
- FRM-40737 is thrown whenever win2 in invoked from CTRL.FLD5
- 'WIN2' does not close by pressing Cancel button, when displayed first time.

Hyperlinks not closing out in RH

Similar Messages

Maybe you are looking for