Hyperlinks not pasting correctly

Hi Ladies & Gents –
I just migrated an excel spreadsheet to numbers, and I'm having trouble posting Numbers-generated hyperlinks into my mail program.
The spreadsheet looks roughly as follows
Name Link Labeled Link
Lions http://blah.com/Lions blah.com
Tigers http://blah.com/Tigers blah.com
Bears http://blah.com/Bears blah.com
The blah.com's in column c are hyperlinks generated with the hyperlink function and looks as such:
=HYPERLINK(B1,"blah.com")
But when I copy and paste these into the mail application, which is what they are generated for, they get paste as just the link text (blah.com) and lose the actual hyperlink.
Any help would be greatly appreciated. Thanks!
– Emerson

It appears that you misunderstood what the function is designed to do.
The HYPERLINK function creates a clickable link that opens a webpage or new email message.
HYPERLINK
(url, link-text)
• url:
A standard universal resource locator. url is a string value that should contain a properly formatted universal resource locator string.
• link-text:
An optional value that specifies the text that appears as a clickable link in the cell. link-text is a string value. If omitted, url is used as the link-text.
If you omit the link-text parameter, the cell value will be the ORL itself so copying will behave as wanted
but if you gave the link-text parameter, the cell value will be this parameter and it's this one which you will get after a copy cell.
To achieve what you are trying to do in both cases, you must copy the "string shaped as an URL", not the Hyperlink.
Yvan KOENIG (from FRANCE jeudi 14 mai 2009 15:20:31)

Similar Messages

  • When paste a web link to some web sites it's not pasted correctly.

    When I try to paste a link (for example I've copied an image adress by pressing right mouse botton "copy image url") than i try to paste it in conversation or a new thread on forum but it's not pasted correctly. Only image name is pasted including .jpg but full adress isn't i mean instead
    http://www.iphones.ru/wp-content/uploads/2012/09/ip5-plus22.jpg
    only
    ip5-plus22.jpg
    is pasted.
    It's so inconvenient. Can anybody advise how to stop this?
    Thank you!

    Pardon the intrusion.
    Very very very glad to see you here again 

  • Hyperlinks not saved correctly in PDF and Excel

    Hi,
    I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
    When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ).  Therefore the child report opens but prompts for inputs as not all the inputs are passed
    When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
    Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
    Regards
    Sameer

    Hello,
    I think this is a limitation in Excel where URL syntax has to be 255 characters or less
    In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
    A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
    Please let me know if it helps you
    Regards,
    Philippe

  • Hyperlinks not working correctly when converting word doc to Web Page, Filtered

    I have created a word document (MS Word 2013) with Table of Contents and their links to particular sections and all the hyperlinks works fine in the word document. But when I convert this document into Web Page, Filtered then after a specific point
    the hyperlinks not pointing to their respective sections instead they are pointed to the end of the page.
    I have checked the page source of the HTML document and found that the table of contents have hyper links but the respective sections doesn't have the hyper link code and hence click on the a section didn't find the that section and go to the end
    of the document.
    I have tried to convert into PDF and hyperlinks worked fine.
    Please advise me how to resolve this issue.
    Thanks in advance
    Deepak

    Hi Deepak,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Hyperlinks not working correctly!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    When I link to a file using the ever so horrible link interface in Muse it drops folders from the path and tries to upload it to the site root. Why would it do that?
    Example:
    Actual link to file: engineering/assets/scrn_casts/scrn_cast 1/scrn_cast_1.htm
    Smae link copied and pasted into Muse ends up as:    assets/scrn_cast_1.htm
    so none of the links will work when using the hyperlink interface within muse. If I open my exported Muse site index.html file with dreamweaver and paste in the correct path everything works fine. SO now I'm stuck with using dreamweaver again for simple hyperlink updates, awesome.......not.
    ***Also when the Muse creates the hyperlink it changes spaces or the "%20" between the file name text with a "-" and then the browser says the file is not found? SO I have to open the index file in dreamweaver and add in the "%20" or change all the linked file names to include a "_" between text? This is rediculous.
    ***Also a couple of links I have are to captivate 6 courses in Html5 which the files are over 100mb so I get an error each time I export to html saying it can't upload the files because they are to big. I didn't ask it upload the files, they are already on the server I just want the hyperlink to change.

    It sounds like there's a fundamental misunderstanding of the "Link to File" feature.
    If you're going to manually FTP files to your server to specific folder locations, then you'll need to manually enter the external http links to those files as links via the hyperlinks UI in Muse (just as you would any link to any other web page or file). Don't use the "Link to File..." feature for this use case.
    If you're going to have Muse upload the files for you, then you can use the "Link to File" feature in Muse. With that feature the link will always be to a file in the "assets" folder and both the link and the file name will be converted to an SEO friendly all lowercase file name with dashes in place of spaces.
    In either case there should be no need to edit any of the output of Muse. Either you can manually FTP files to your hosting and enter external http links (i.e. http://mysite.com/wherever/whatever.xyz) or you can use the "Link to File" feature in Muse in which case the only option is to accept the file location and name created by Muse.

  • Captivate 5 not pasting correct screenshots from Snagit

    Sometimes Captivate will paste the previous pic instead of my most recent pic from Snagit 9.
    EG: I want to paste a dog pic from Snagit to Captivate. I copy the dog pic from Snagit and paste it into CP5; however, I get the cat pic I pasted the time before into CP5 from Snagit.  Thinking I didn't copy the dog pic correctly, I went back into Snagit and recopy the dog pic and again tried to paste it--CP5 pasted the cat pic.
    I tested pasting the dog pic into MS Word and it works just fine.  I copy the dog pic from MS Word and go back into CP5 and paste...AND AGAIN...the cat pic displays.  I've cleared CP5 cache (which I thought might be the culprit) but that wasn't it.  The only way I can fix the copy/paste problem is to close Captivate entirely (not just the doc but the entire program). 
    Has this happened to anyone else?  What did you do to resolve the problem?  
    -Frustrated in St. Paul

    There have at times been issues with trying to use the Clipboard to paste images into Captivate.  You are better off saving your image from Snagit as a JPG or PNG file to a folder, and then using the Captivate INSERT > Image function to get the image into your project.

  • Why is the character style for hyperlinks not displaying correctly in design mode/viewing/output?

    I am using RH9 and generating WebHelp, and I needed to globally bump up the font size of just my hyperlinked text. I went into my Style Sheet > Character tab, changed the font size of the various character settings for hyperlinks, and clicked Apply and then OK. Normally, this would change all of my hyperlink text font sizes immediately across all of my topics. However, this time, it made no changes to any existing hyperlinked text, and it only affected new hyperlinks that I subsequently added. For the existing hyperlinks, I can only manually change the font size of the each hyperlink one at a time, but that's crazy (there's 100's in this help).
    I can successfully change other characters styles and paragraph styles. This issue only affects the hyperlink character styles. It also shows up in all RH modes - Design mode, viewing, and in the final output.
    Is this an indication of a corrupted style sheet or some other combination of events that I have yet to discover?

    Hi,
    You probably have inline styling in your project overwriting the font size of your style sheet. How are you changing the font size of the individual hyperlinks?
    There is a workaround for inline styling: Open your CSS in notepad and add !important after the font-size:
    font-size: 4pt !important;
    Note that this is a workaround, not a solution. As a solutions you can remove all the style attributes from your hyperlinks to force them to take the CSS styling again.
    Greet,
    Willam

  • Diacritics not pasting correctly

    Dear all,
    I have attached a 2 page sample of a recent PDF document in English with a few diacritics. When I copy some text from the PDF to MS Word 2003, the pasted letters are fine but the diacritics come out as gobbledegook. Any suggestions please??
    Thank you,
    Ju

    My pdf document declares at the beginning that its font is'Set in 10 on 12.5 pt Photina'. Does that help - is that a Unicode font? When I paste into MS Word, the font shows as PhotinaMT. I have tried every font in MS Word but none will display the diacritics correctly.
    Thanks

  • When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."  Reistallation impossible!

    When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
    Reistallation of older or up to date  iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
    Someone can help me ???
    Thank,
    Gerald

    Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I attempted to download a song. It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    Hello Whitney262,
    Thanks for using Apple Support Communities.
    I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases.  The article below will walk you through the entire process:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Take care,
    Alex H.

  • HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes."  I have never had problems in the past.  Is this a real m

    My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes." 
    I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade.  I have never had problems with iTunes in the past.  Is this a real message or perhaps a virus?
    Before I reinstall iTunes, any thoughts?

    It's a real message.
    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • Hyperlinks Are Not Functioning Correctly

    I have a problem with the some of the hyperlinks in my
    WebHelp Pro project not functioning correctly once the project is
    compiled. What happens is that when I click on a hyperlink the text
    doesn't change from blue to purple. Not all the hyperlinks on a
    page are affected; some may work while others do not.
    When I look at the HTML code, I see two different things
    happening, and both things may not occur in the same code:
    1) In some documents the code reads "a visited=0000ff." The
    value should be 800080.
    2) In other documents "font color=blue" is being added to the
    HTML code for a particular hyperlink. Other hyperlink code in the
    same document may be unaffected.
    I have checked the font color in the editor to make sure it
    was set to "automatic" before I created the hyperlink. I removed
    the hyperlinks altogether, recompiled, then opened the document
    back up and recreated the hyperlinks. The problem still exists.
    Every document in my project is using the default.css style sheet.
    I use the same paragraph style throughout the project, both on the
    links that work correctly and those that do not.
    Has anyone ever experienced this problem? And if so, do you
    know the fix? I could manually edit the HTML code before publishing
    my project, but that is just a bandaid fix.

    The hyperlink color is controlled by the style sheet. I edit
    my style sheets in a text editor. Make sure you clear your browser
    history before testing the color changes.
    FWIW, I like my links to stay blue--I usually have the color
    change to purple in hover just to indicate that what is moused is
    indeed a viable link.

  • Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks.  If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?!  I've rebooted the iPad & my wireless card several times but neither action helped.  Have any clue what I should do now?

  • Vista itunes not installed correctly.  Error 7.  Windows error 998.  Itunes helper not installed correctly.  Service Apple Mobile Device failed to start.  Insufficient privileges.

    OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items.  Help?
    I am using Windows Vista home premium.  After the last iTunes update to 12, it suddenly would not work.  I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
    Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services."  I am the administrator and have privileges.  (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail.  I also deleted every file with the word Apple in it after I uninstalled everything.)  I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
    The other error I keep getting is:  "iTunesHelper was not installed correctly.  Please reinstall iTunes.  Error 7."  I have done that 20 times.
    Other frequent error:  "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 998)."
    I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0.  No help.  I also looked for various specific Apple files in various folders for DLLs, etc.  Not present.  I have rebooted 50 times and tried different users on my home account as well.  Nothing.
    I also followed instructions to Manage my computer under "services."  Under Apple Mobile Device, the setting is for "automatic."  When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer.  Error 1053:  The service did not respond to the start or control request in a timely fashion."  (I followed previous thread instructions to use the CMD prompt to stop it.  That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
    I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.)  I am fresh out of ideas and very frustrated.  I mostly want to make sure I don't lose my music and photos, which I was about to sync.
    The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012.  My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12?  I have service pack 2 for Vista.  I have followed all threads to try to set my windows to automatic update, but no joy there either.  It checks for updates and then fails.  I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either.  I tried 10 times.  It runs and takes a while, but is never able to successfully update windows.  It says "checking for updates" for a while.  Then it dies.  My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
    When asked to "Install new Windows Update software" to check for updates, I have done so 10 times.  It downloads and installs, but never works.
    It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S.  I am fresh out of ideas.  Anyone really smart here?
    Thanks.
    Tristan

    Upon latest reboot, I also received this error message:  "The application failed to initialize properly (0xc0000005).  Click OK to terminate the application."
    Then I got the iTunesHelper not installed correctly error again.
    Then the "Windows can't check for updates" error message.
    Then "Apple Push has stopped working."  Then a quick DEP error message that disappeared but said something about Apple Push being closed.
    I'm also getting denials of service logged by McAffee.  Not sure if I'm getting a virus/attack or not.
    Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
    Thank you for your help!
    Tristan

  • Crystal report not showing correctly in firefox after windows update

    From the past six months, crystal reports has been displayed without the print toolbar and the formatting is completely lost in firefox. Previously we found that when we uninstall the windows updates KB2836942, KB2836943, KB2836946, KB2836947, the problem is resolved. But with more and more windows updates that are automatically updated on the servers, it is getting practically impossible to track which windows update creates the problem. There is absolutely no issue in Chrome, IE and Opera; it is only with firefox that this problem occurs; so we feel it is more of a firefox issue than a windows update problem. It is not just in one machine, but we found the same issue at all our customer's servers (more than 10). The servers are a mix of windows 2008, windows 2012 with iis 7. We also observed the same problem on windows 7 machines. We have been recommending firefox as the best browser for our software to all our customers, and with this problem cropping up, we are badly handicapped. Kindly let us know how to sort this issue. We have provided the link below for your perusal. When you open it in chrome it works fine, but on firefox it does not display correctly:
    http://54.209.141.3/Reports/Report.aspx?reportname=RptProductWiseSalesDetails.rpt&paramlist=@FromDat,01/01/2011;@ToDat,01/26/2014;@BranchSlno,1;@FranchiseSlno,1;@FirstCol,B;@DateType,B;@SaleChannel,A;@ProductTypeSlno,0;@ProductSlno,6;@ColorSlno,0;@FinancierSlno,0;@ChannelTypeSlno,0;@ChannelSlno,0;@SalesPersonSlno,0;@SaleStatus,L;@BillingType,A;@LoginUser,admin;@LoginBranch,Keerthi%20Triumph%20Bangalore;@Franchise,Triumph;@AddCustomerDetail,0;@SaleCodeSuffix,&loadfromsql=0

    Those four updates all relate to the .Net framework, and involve how an ASP.Net application recognizes different browsers.
    * http://support.microsoft.com/kb/2836942
    * http://support.microsoft.com/kb/2836943
    * http://support.microsoft.com/kb/2836946
    * http://support.microsoft.com/kb/2836947
    Each contains this Note:
    <blockquote>There is a configuration switch to be used to revert back to the old behavior: <br>
    <pre>&lt;appSettings>
    &lt;add key="aspnet:UseLegacyBrowserCaps" value="true" />
    &lt;/appSettings></pre>
    </blockquote>
    I think the downside of turning off the changes is that IE 11 will not be well supported.
    That's all I know so far...

Maybe you are looking for