Hyperlinks not working w/ dual monitor set up

I've found what appears to be a pretty bad bug in Keynote 09 that I'm hoping someone else can confirm.
If I connect my MacBook to an external monitor and turn off monitor mirroring so I can see my presenter screen on the MacBook and the main presentation screen on the external monitor, I lose control of all hyperlinks that I have in the presentation. Thus far, I have tested this with simple hyperlinks that link to another slide in the presentation.
Using either the trackpad or a connected usb mouse, I can place the cursor over the link area and the cursor icon changes as expected, but tapping on the link with either source does nothing. If I turn monitor mirroring on, I gain all control and am able to select the hyperlinks in the running presentation.
So, if I want to run a two monitor presentation so I can have my presenter notes in front of me, I cannot use hyperlinks.

Have you treid moving the mouse over to the second screen?
This worked for me.

Similar Messages

Photoshop CS5 for Windows not working on dual monitor setup

If I try to open Photoshop CS5 while my second monitor is plugged into my laptop (via VGA cable), it loads normally, but won't display any opened images. I get a gray background and nothing else. (see screenshot here: http://screencast.com/t/f1bHcM3E )
(I can even see the tiny image preview in the navigator, but not the image itself.)
However, t'll work just fine if I open Photoshop with the second monitor disconnected and THEN plug it in, so it's not a problem with the dual monitors in general...just when first opening it. It's annoying because, if I'm working on a project and realize I have to make a quick image tweak in Photoshop, I have to unplug the monitor and then rearrange all my windows after Photoshop's done loading and I can plug it back in.
Does anyone have any idea what's up with this? I can't seem to find any information online that specifically mentions this issue. For reference, I'm using Windows 7 on a Lenovo laptop.
Thanks!

Oh, that's possible. I went and read the detailed specs for my computer and it seems like it has both Intel and NVIDIA. Could that be it? (Computer hardware issues are not my area of expertise.)

Dual Monitor Set-ups (opinions please)

So I'm finally ready to jump into the dual monitor set-up. Right now I'm using a single 19" widescreen monitor. I recently started doing more work with movies and it would be absolutely wonderful to have the movie on a separate monitor.
Does anyone have any suggestions or recommendations for moving to this type of set-up? I want to make sure I buy something that will do the job for a long time.
Thanks in advance!

Hello Pal, Sorry for the late response... but this is what I use (Note: I have a laptop)
http://store.apple.com/us/product/M9321G/B?fnode=MTY1NDA5OQ&mco=MjE0NTg3Nw
I believe this is exactly what you'd need (there is no additional software needed)
You just plug it in, both screens flash a light color blue for about 3 seconds and you're off.
The only downside is if you are used to using your hot corners, when the screens are split you have to move your move a whole other screen length.
http://store.apple.com/us/product/M8754G/A?fnode=MTY1NDA5OQ&mco=MjE0NTg4MQ

E440 not working with external monitor via onelink dock

My brand new E440 is not working with my monitor when connected via the dock, however it is working when plugged straight into the laptop. I have tried using another E440 with the dock and monitor, this set up worked flawlessly.
Any ideas on how to fix this probllem?
Thanks

I sent it in for repair. Came back and it was still not working. Im waiting for lenovo to get back to me on it.

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

HT1677 In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

Why do hyperlinks not work in a pdf when it is signed?

Why do hyperlinks not work in a pdf when it is signed?

Adobe reader there any payment to be no problems or allow sharing through hyperlinks.
Dentistas en lima

T61 worked with Dual Monitors and now it does not

I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??

The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention.

Reader X hyperlinks not working

I am running Reader X Vn 10.1.0 on Windows Vista. Hyperlinks from pdfs on my machine to PDFs on websites have stopped working. I imagine that I have inadvertently changed a setting, but I can't see how to change it back. I have tried Edit, Preferences, Trust Manager, change internet settings and checked 'allow pdf files to access all web sites', but it does not seem to have made any difference. I do get the hand when I hover over the link, and the web address is correct, but nothing happens when I click on the link. If I open the pdf on my machine with acrobat, the links work fine. Please would someone let me know what setting to change in reader so that I can follow the hyperlinks. Many thanks

just the "alias hyperlinks"(don't know the specific name) are not working.
if I write down www.hp.com it's just fine.
i've uploaded documents..
one is created with nuance pdf converter and the other with MS Office Word "save as pdf" function.
http://www.filedropper.com/linktestdocumentnuanceconverted
http://www.filedropper.com/linktestdocumentofficesafeas
so it seems like that nuance is not supporting "alias hyperlinks"..

Bookmarks and Hyperlinks not Working in PDF's

Hi,
I have 2 pdf files, one has extensive bookmarks which do not work. The other pdf has anchor links to refer you to certain areas in the document some work and some do not. How can i fix this in Acrobat Pro 11

Hi,
Thanks, I have found the actions details and can set the pages I want. The
other file has hyperlinks to anchor text I think, not bookmarks, but when
you right click there is no info given only document properties. Any idea
how I can fix those links in the pdf. And again thanks for your help.
Mary
On Thu, Feb 27, 2014 at 8:55 AM, Gilad D (try67)

Hyperlink not working in KM Iview

Hi All,
I have created a html file in KM which has hyperlinks to other html in the same folder.
When i click the preview of html in km folder the hyper link works fine.
But when i create an KM document ivew and attach the html link there, the hyperlink in the attached html does not work ?
Please can anyone guide me on this.... any properties of ivew i need to set ?
why is it that the hyperlink works in km preview and not when embeded in an Iview.
Regards,
Sanjyoti.
Edited by: sanjyoti lengare on Apr 1, 2010 10:32 AM

Hi Sanjyothi,
Follow the below steps:
1) To create Internal Link, first we need to upload some documents into the KM repository.
2) Uploading Documents: Go to Content Management -> Explorer, on Detailed Navigation area.
Click on Folder on the Object Based Navigational Area, New -> Upload.
3) Upload some documents in the same folder which we have created i.e. Test, the file can be a text file, pdf or any other word document. Incase you have problem uploading the file then please go through this wiki link.
https://wiki.sdn.sap.com/wiki/x/kdc
4) For your understanding the documents which you have uploaded are saved in database in the form of BLOB or CLOB.
5) Now again click on Folder on the Object Based Navigational Area, New -> Link
6) Select the document for which you want to create a Link.
7) Now create an iview, through which we can view the document.
8) Go to Content Administration -> Portal Content
9) To avoid confusion it is recommended to create a Folder in which you can create the iView.
10) Select the Folder you have created.
11) Right Click on the Folder choose New -> iView.
12) In the displayed iView wizard, choose iView template (This is the SourceType in the RoadMap)
13) Click next, in the template selection wizard choose KM Document iView and click next
14) In the general properties provide iView name, id, and description and click Next button
15) In the next step click Open Object for Editing and click ok button
16) In the properties view, edit the path so that the iView which we are creating points to the document which we have uploaded.
For Example if there is a document which is uploaded in Documents folder. Give the path of the document. E.g.: /documents/< folder name>/<file_name>
17) Save the changes and preview the iView which displays the file contents.
Regards,
Ponneswari.
Edited by: Ponneswari Adapa on Apr 5, 2010 9:15 AM

Hyperlink not working at BO XI R3

Hello
I made a very simple hyperlink but its is not working. I am trying to get it work from last 2-3 days but not sure what is wrong.
It would be a gr8 help someone can help me out.
I am using
="<a href=\"../../opendoc/openDocument.jsp?iDocID=74150&sType=wid\" title=\"\" target=\"_blank\" nav=\"web\">"[Job Execution Parameter]"</a>"
let me know if i need to do some setting change to implement it.
I am using Windows ad to login to BO and my database is sql 2008.
I checked the port and it is 80.
Thank you.
Regards,
Mohit

Are you using the BusinessObjects Enterprise Java SDK to do this?
If you're using InfoView or CMC, then the question is best asked elsewhere.
Sincerely,
Ted Ueda

HP Pavilion p6-2316s not seeing 2nd (dual) monitor

I have an HP Pavilion p6-2316s and i'm trying to do a dual monitor setup
my main monitor is working property- connected via VGA
my second monitor HP L1950g is connected via DVI-D
so I bought a DVI-D cable (Gold-plated DVI-D Digital / Digital Dual Link Cable 9.9Gbps 24+1 pin M / M, 6 FT / 1.8 M, Black) to connect to my second connection on my PC that is DVI-D as well
I believe I have updated my drivers
I also upgraded to windows 8.1
it doesn't even detect the 2nd monitor at all
Also
when I go into device manager under display adapters "AMD RADEON HD 6410D" the driver date is 12/6/13
then I see under Processors "AMD A4-3420 APU with RADEON HD GRAPHICS" the driver date is 4/21/09
not sure what the difference is....
been searching online for a solution but no luck yet.....

Nowherefast, welcome to the forum.
Here is a guide that should help you get the dual monitors working.
Please click "KUDOS star" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hyperlink not working on TLF textfield with right align

I have a strange problem with TLF textfield in flash cs5.5. Hyperlinks stop working if I set Text Align to "Right" both in the IDE and Through AS3 code. This works perfectly in Flash CS 5.0
I really cant go back to CS 5.0, hence any suggestions on a workaround will help immensely.
I found a similar issue on the forum with no answer.
http://forums.adobe.com/message/3893357#3893357

Here are the steps I have taken so far, none of them working:
1.) I have done a full reset and set the phone up as a new phone (no restore from icloud)
2.) I have downloaded the public release build from the developer forum, installed it, and set up as a new phone.
3.) I have done 1 and 2 above while restoring from icloud
Not one of them has worked. I am wondering if it isolated to the Verizon iphone 5?

Hyperlinks not working w/ dual monitor set up

Similar Messages

Maybe you are looking for