Hyperlinks to external sites not working

I made a few changes to my web site and re-published it. Now, some of the hyperlinks aren't working after the site is published (they all work while I am still in iWeb).
The hyperlinks that are working are the ones that connect to documents; the live link to my email address is working, as well. The hyperlinks that are not working are the links to external web sites such as pages of various organizations. They were all working as recently as two days ago. I re-published the site a few times, doing both a "publish site changes" and "publish entire site." No luck either way. Any ideas?

I had the same problem and I found no solution -- only an "empirical" solution. I am 100% positive that the links were working until few days ago; then I republished and lost some links. Here is what happened: some images or other objects with other links "overlap" the objects with the links, and so you cannot use them any longer. Unfortunately, you do not see it from within iWeb, because there everything works fine.
Try to take your objects with links, move them somewhere else on the page, put them on front, republish, and see if they work (maybe you want to make a copy of your original page first). If they do, look at what objects are close to the ones that do not work, try to resize them or reposition them, put your original object back and see if you are lucky when you republish the site.
l.

Similar Messages

Links to external sites not working in PDF on iPad

I have put a PDF on my server, it has internal and external links.
Most people will download it and view it on their own computers using Adobe Reader.
I was asked to check how it worked on eBooks.
On my Kindle software, (on the Mac) it worked fine.
On iPad, Safari did not let it download so I am viewing it through the iPad's Safari browser. The internal links from page to page work, but the external links to urls do not. The address, when I click the link, adds in my own server url first, then the url I want, eg www.myserver.com/http://www.theserveriwant.com
1) Is there a way to get iPad's Safari to download the pdf that I am missing? I am used to an automatic download on my computer. In that case, I could probably use Adobe Reader for iOS.
2) Is there a way to make the links work properly, some preferences or something to set?
iPad G4, iOS 5.1
Thanks so much.

Or you could click the link below:
Click here
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Hyperlinks to external URL not working

Hi folks. I exported a CS4 indb to epub, opened it with Digital Editions, and clicked on a hyperlink. The link activates my browser, but does not go to the actual page. It just brings my browser to the front and displays whatever page was previously there. It is not opening in a new tab or in another window that is in the background. So, as a test, I exported one of the book's indd files to pdf and clicked on the hyperlink. This worked fine, it activated my browser AND displayed the correct page. Any thoughts how to get Digital Editions to go directly to the URL, not just merely switch to the browser which shows whatever page was last opened? Thanks!

Also, just tested it in Calibre, and it worked. Looks like a Digital Editions issue.

My macbook pro external speaker not working! help please

My macbook pro external speaker not working! help please

1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
     Pllug in the speakers.
     Do they show up?
     Make sure that Mute is not enabled.
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

Some web sites not working in FF but they are OK in Safari.

A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJT

Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you

Download software site not working for Financial Data Quality

Hi
Financial data quality management site download site not working. it's showing error message below error message.
Error message: "We're sorry,the page you requested was not found.We have recorded this error (404) to help us fix the problem"
Site: http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-data-quality-111130-085525.html
regards
Anil

Hi Ferro;
As far as I can see Apple doesn't have to fix anything with Software Update because it is working perfectly for myself and the users I help to support.
So maybe if you can give us more details; such as what error messages are you getting, what have you done so far to solve this problem.
Allan

FDM download site not working

Hello
FDM download site not working for 11.1.1.3 version
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-data-quality-111130-085525.html
From
Sarilla

I wonder what are we supposed to understand from this?
Is JSF still there?

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

Preloader in external swf not working

I have several external SWFs that are loaded into my site and
each one has a preloader. When I run them by themselves the
preloader works fine, but when it is embeded into the main SWF the
preloaders do not work. Any ideas?
here is my actionscript -
lBytes = _root.getBytesLoaded();
tBytes = _root.getBytesTotal();
percentLoaded = Math.floor((lBytes/tBytes)*100);
loader.bar._xscale = percentLoaded;
loader.percent.text = percentLoaded + "% of " +
Math.floor(tBytes/1024) + "K loaded.";
if (lBytes>=tBytes && tBytes>0) {
if (count>=12) {
gotoAndPlay("enter");
} else {
count++;
gotoAndPlay("preload");
} else {
gotoAndPlay("preload");
}

I am experiencing the exact same problem on my site -
www.expansiondesign.com
It works in flash player but not when live (tested safari and
firefox)
I don't know if you are using the same script as I am paul.
I execute the following when each image button is pressed:
button1.onRelease = function () {
startLoading("image1.jpg");
which runs this:
function startLoading(whichImage) {
loadMovie(whichImage, "_root.image_holder");
_root.onEnterFrame = function() {
infoLoaded = _root.image_holder.getBytesLoaded();
infoTotal = _root.image_holder.getBytesTotal();
percentage = (infoLoaded/infoTotal*100);
_root.loader._yscale = percentage;
_root.loader._visible = true;
if (percentage>=100) {
delete this.onEnterFrame;
_root.loader._visible = false;
Thanks,
Barton

External links not work

Hello,
I have a word document that has external links. Text that
links to other page or other url.
When I convert my doc (word document) into a swf using flash
paper 2 the links not work. There are still highlighted but no
linking is taking place.
please help me.
Thanks
Alejandro

I am having the same problem. At first I thought it was
because I had converted an excel file but I tried the same
information from a word document and the links do not work in the
browser or if I view the SWF file separately. Additionally, when I
convert the word file to a pdf none of the hyperlinks to pages or
documents work but the links to email addresses do.

Adobe Muse site not working in Google Chrome

Hi Guys, my adobe muse website www.focaldesigns.ie is not working in Google Chrome, i was advised to publish it again which I tried twice with no joy. Any help on how i can get the site back working in Chrome and on an iPad would be greatly appreciated. Thanks a mil, Claire

Hi Gaurav, thank you for taking the time to check this out for me. I appreciate it.
I've figured out If you open it in Chrome on a larger that 15" screen the site will open yet for some reason when I open it in Chrome it recognizes it as tablet and http://focaldesigns.ie/tablet/index.html appears in the tab bar -
I've tried re publishing the site in Muse and updated Chrome updates yet it is still not opening on a 15inch mac in Google Chrome, it is opening in other internet browsers perfectly. Any ideas?
Look forward to hearing form you.
Thanks Again.
Claire

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

ASA-5505 Site-to-Site Not Working

I am somewhat new to Cisco but to do have some experience. I am trying to connect two ASA 5505's together via site-to-site VPN. They are configured with public IPs and all other services are working. I have used the VPN wizard on both boxes successfully but the tunnels are not working. The two devices are on the Comcast network. Any help would be appreacited.
Site A: ASA 5505 w/50 User license
Site B: ASA 5505 w/10 User license
Site A Config:
ASA Version 8.2(5)
hostname *********************
enable password 6.De4e7UzES9wBPg encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.100.10 Web_Server
name 10.0.6.0 Ghost_Flower_Inside
name 10.0.5.0 San_Mateo_Inside
name 10.0.5.100 Any_Connect_100
name 10.0.5.101 Any_Connect_101
name 10.0.5.102 Any_Connect_102
name 10.0.5.103 Any_Connect_103
name 10.0.5.104 Any_Connect_104
name 10.0.5.105 Any_Connect_105
name 10.0.5.106 Any_Connect_106
name 10.0.5.107 Any_Connect_107
name 10.0.5.108 Any_Connect_108
name 10.0.5.109 Any_Connect_109
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.5.201 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 173.10.XXX.XXX 255.255.255.252
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 75.75.75.75
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network Any_Connect_DHCP
network-object host Any_Connect_100
network-object host Any_Connect_101
network-object host Any_Connect_102
network-object host Any_Connect_103
network-object host Any_Connect_104
network-object host Any_Connect_105
network-object host Any_Connect_106
network-object host Any_Connect_107
network-object host Any_Connect_108
network-object host Any_Connect_109
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface outside eq ssh
access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 192.168.100.2 netmask 255.255.255.255
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 173.10.XXX.XXX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.1.0 255.255.255.0 inside
http 10.1.10.0 255.255.255.0 outside
http San_Mateo_Inside 255.255.255.255 inside
http San_Mateo_Inside 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 173.12.XXX.XXX
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
vpn-sessiondb max-webvpn-session-limit 10
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.0.1.0 255.255.255.0 inside
ssh San_Mateo_Inside 255.255.255.0 inside
ssh 10.1.10.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.0.5.10-10.0.5.30 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
svc profiles CATS disk0:/cats.xml
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 75.75.75.75
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
webvpn
svc profiles value CATS
username user1 password tTq7bIZ.C4x0j.qv encrypted privilege 15
username ********* password sPxon1E6hTszm7Ko encrypted privilege 15
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
: end
Site B:
ASA Version 8.2(5)
hostname ***************
enable password 6.De4e7UzES9wBPg encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.100.10 Web_Server
name 10.0.6.0 Ghost_Flower_Inside
name 10.0.5.0 San_Mateo_Inside
name 10.0.5.100 Any_Connect_100
name 10.0.5.101 Any_Connect_101
name 10.0.5.102 Any_Connect_102
name 10.0.5.103 Any_Connect_103
name 10.0.5.104 Any_Connect_104
name 10.0.5.105 Any_Connect_105
name 10.0.5.106 Any_Connect_106
name 10.0.5.107 Any_Connect_107
name 10.0.5.108 Any_Connect_108
name 10.0.5.109 Any_Connect_109
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.5.201 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 173.10.XXX.XXX 255.255.255.252
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 75.75.75.75
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network Any_Connect_DHCP
network-object host Any_Connect_100
network-object host Any_Connect_101
network-object host Any_Connect_102
network-object host Any_Connect_103
network-object host Any_Connect_104
network-object host Any_Connect_105
network-object host Any_Connect_106
network-object host Any_Connect_107
network-object host Any_Connect_108
network-object host Any_Connect_109
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface outside eq ssh
access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 192.168.100.2 netmask 255.255.255.255
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 173.10.242.182 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.1.0 255.255.255.0 inside
http 10.1.10.0 255.255.255.0 outside
http San_Mateo_Inside 255.255.255.255 inside
http San_Mateo_Inside 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 173.12.XXX.XXX
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
vpn-sessiondb max-webvpn-session-limit 10
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.0.1.0 255.255.255.0 inside
ssh San_Mateo_Inside 255.255.255.0 inside
ssh 10.1.10.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.0.5.10-10.0.5.30 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
svc profiles CATS disk0:/cats.xml
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 75.75.75.75
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
webvpn
svc profiles value CATS
username ************** password sPxon1E6hTszm7Ko encrypted privilege 15
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
: end

Hi Kevin,
Both the sides have IP address of 173.10.XXX.XXX on the respective Outside interfaces and you have configured the peers for 173.12.X.X.
Please ensure the correct IP addresses for VPN peers are configured , via the following command:
crypto map outside_map 1 set peer X.X.X.X
e.g. If you have 173.10.X.X on Site X and 173.12.X.X on Site Y , then
On Site X, peer would be
crypto map outside_map 1 set peer 173.12.X.X
and the tunnel-group will be
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
On Site Y, peer would be
crypto map outside_map 1 set peer 173.10.X.X
and the tunnel-group will be
tunnel-group 173.10.XXX.XXX type ipsec-l2l
tunnel-group 173.10.XXX.XXX ipsec-attributes
pre-shared-key *****
Also , the nat exempt would be complimentary on each other i.e.
On Site X,
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
On Site Y,
access-list inside_nat0_outbound extended permit ip Ghost_Flower_Inside 255.255.255.0 San_Mateo_Inside 255.255.255.0
Hope that helps.
Regards,
Dinesh Moudgil

External Display not working (descriptive details in post)

Hello
Background:
I have been using a black Macbook (last year's model - before the aluminum ones came out) and connecting it to a VIZIO VW22L HDTV10T (television/monitor) via a mini-DVI to VGA adapter.
This setup always worked, although it was a bit finicky (I'd have to plug it in before closing the display to get in to work in clamshell mode, for example). I get the feeling from reading other forum posts that this is the normal case, though (which so far has been my only real gripe with OS X).
Anyway, back a couple months ago I wondered if this finicky-ness was partially caused by a messed-up preference file, so I decided to try and fix this. In the ensuing tweaking, I somehow caused my Display preferences to disappear.
After much effort trying to fix the problem, I eventually called Apple support, which ultimately recommended that I reinstall OS X. I didn't do that, and continued to work at the problem. I eventually was able to bring it back by going into my Time Machine backups and restoring all the Display preference files (I used old preferences from back when I got the external HD, so I knew they'd be "uncorrupted). However, now I'm having problems with my external display, namely that it is not working.
This problem started early this year, so it might have been caused by the 10.5.5 update, but since I had all these other problems going on, I'm not sure if that was the case.
Problem:
The Macbook doesn't seem to recognize the display, or is having problems routing video to the display, or something.
If I plug the display into the Macbook while it is running normally, the Macbook LCD will flash blue (like it picked up a new display), but them come back to normal. The monitor will go out of sleep mode for a second, but then display a "No signal" message. If I attempt to "Detect Displays" the Macbook screen will either flash blue (as before) or just do nothing.
If I have the display plugged in when I start up the Macbook, everything will proceed as normal until the time the desktop would be displayed. Instead of this, I just see a blue screen (like some generic desktop before any background is applied). The menu bar, the dock, and icons do not show up. However, I can hear various audio cues telling me the computer is running fine except for htis problem (email notifier going off, etc.).
I know the problem is not faulty hardware, because when I boot my Macbook into Windows, everything works perfectly. It therefore follows that it is an OS X problem. I downloaded both Cocktail and Applejack and run various repairs on them (most notable repairing preferences), but nothing has changed.
Any suggestions about how to try fixing this? If there's any technical detail I've missed, let me know.
Thank you in advance to everyone who tries to help.
-Richard

I have same problem. MacBook Pro (new, 2014) upgraded to Yosemite. Had been running with ViewPoint high-resolution, 27" monitor, HDMI. I tried Thunderbolt connection -- it connected, but it would not allow the external monitor to run at its native resolution (2560x1440). It would only display properly using HDMI. Just 3 days ago after I installed the latest OSx software update, and my external monitor problems started. On startup, my MacBook screen flickers non-stop. I can fix problem eventually (after several tries) by disconnecting the HDMI cable, turning OFF the external monitor power, turning external monitor back ON and then plugging in the HDMI to my MacBook Pro. This is very inconvenient.
I will try using the Thunderbolt cable. When I tried it in the past, it connected, but it wouldn't display the native resolution of my external monitor (which is 2560x1440). Can only get this resolution now with HDMI.

External drive not working on iMac, but works on Macbook Pro

I have read a few different threads relating to this question, with no real luck of a permanent solution.
I have an external drive that works perfectly on my Macbook Pro. My new iMac will not show the drive though (both with the current software).
The drive itself shows a power light and appears to be running/powered by the USB port.
I have tried several ports.
It does not show in Disk Utility.
The option in settings is set to show the drive in finder and on the desktop (I have checked this).
I have tried restarting the iMac.
I have also had this problem after the iMac has been turned off overnight, and turned on in the morning (and then plugging the drive in after powering on).
I resolved this issue once by turning off the iMac, removing the power cord for a few minutes, and powering it up again.
I don't think it should be something I have to do every time I would like to use the drive though - It would be very irritating if I had to do that every time.
Any advice or options here?
The iMac has only been used since Christmas day, 2014 - and has had this problem since that day (in which i solved it by the turn off/unplug thing).
Sorry, I am aware this question has been asked a lot. I haven't come across anything that is giving me a long-term solution to this problem.
Happy new year!

Some USB-powered drives are just crappy. They require too much current from the USB and cause the bus to fail or the bus can't provide enough power for it to fully spin up. You can often hear or feel them clicking periodically (like once a second) as they are trying to spin up.
If this is the case, a powered Hub, external power supply, or Y-cable will be necessary to consistently use the drive.

Hyperlinks to external sites not working

Similar Messages

Maybe you are looking for