Hyperlinks used to appear red when web page loaded, now I have to hover to show them, this is before the upgrade.

For instance, before the upgrade, I used to log into jud.ct.gov. The hyperlinks to various publications and websites internal to jud.ct.gov used to appear in red so that I could easily see and select the one I wanted. Now they appear in white and I cannot see them unless I hover the mouse over the item. At that point it turns red so I can see which link to click.

Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Below are the settings in
my config. Search for them, and copy there values here.
browser.underline_anchors; '''=''' true
browser.visited_color; '''=''' #551A8B

Similar Messages

Using TextEdit to create a web page?

I've been using Microsoft Notepad to create web pages. Now I have an iMac, I've tried to use TextEdit, but when I save the the file as html you can see all my code. Do I need a Mac version of Notepad - is there one?
chrisvips

From my experience when I was doing online course for web design I did use TextEdit for the html coding in the Prefernces go to "Open and Save" under the HTML Saving Options, choose a document type, a setting for CSS and encoding.

Web pages loading with a long wait period

Hello
I have just i have just installed windows server 2012 R2 on my new PC
Here is my configuration:
Core i7 3370
4 GB RAM
1GB Graphics
I am using Netgear wireless adapter WNA3100
Internet connection seems to be OK, download is OK
However web pages are loading very slowly on first load and then on subsequent loads it is more rapid.
Do i need to do any additional config to solve this issue?
Thanks

Hello
I have the same latency issue with all web pages on this server (firefox, IE and chrome)
on my laptop which uses the same connection web pages load instantly
I have a 2mbps internet connection
in internet download manager i have a download rate of 225 kbps
below is the tracert result for one of my website http://www.newturf.com:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>tracert newturf.com
Tracing route to newturf.com [109.104.87.150]
over a maximum of 30 hops:
1     *        *        *     Request timed out.
2    18 ms    18 ms    28 ms 197.226.32.1
3   223 ms   113 ms    88 ms 196.20.255.10
4    23 ms    22 ms    18 ms tengig4-1-tr.telecomplus.net [196.20.254.169]
5   258 ms   257 ms   255 ms 81.52.188.125
6   306 ms   259 ms   291 ms gigabitethernet13-2-1.marcr2.Marseille.opentrans
it.net [193.251.133.209]
7   276 ms   322 ms   326 ms tengige0-9-0-9.pastr1.Paris.opentransit.net [193
.251.128.242]
8   270 ms   275 ms   276 ms telia-3.GW.opentransit.net [193.251.250.222]
9   262 ms   261 ms   261 ms prs-bb1-link.telia.net [213.155.132.192]
10   293 ms   282 ms   272 ms ldn-bb1-link.telia.net [80.91.247.7]
11   293 ms   277 ms   270 ms ldn-b5-link.telia.net [80.91.246.145]
12   295 ms   279 ms   275 ms hosteurope-ic-143126-ldn-b5.c.telia.net [213.248
.96.50]
13   288 ms   274 ms   276 ms 109.104.95.102
14   275 ms   315 ms   273 ms cr5-cr4.core.webfusion.com [109.104.95.145]
15   302 ms   276 ms   276 ms cr4-ld4.core.webfusion.com [109.104.95.142]
16   275 ms   276 ms   275 ms ds7073.dedicated.turbodns.co.uk [109.104.87.150]
Trace complete.
Is there any config i need to make for DNS?

Using the Motorola Atrix w/ the laptop dock, when I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up so pages open the right size?

I'm using the Motorola Atrix smart phone with the Laptop Dock. When I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up the Firefox browser to open the web pages the right size in the first place?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

A blinking cursor appears on every web pages.

It's a blinking cursor that appears on every web pages in different sizes when I click anywhere on the web pages.
Look at following pictures please:
http://samansh.persiangig.com/2011/cursor4.jpg
http://samansh.persiangig.com/2010/cursor.jpg
http://samansh.persiangig.com/2010/cursor2.jpg
http://samansh.persiangig.com/2010/cursor3.jpg
I believe that it's been originated and are spread from Google's Keyboard Navigation feature. As you may know, if you are using Google's Instant Search feature, you can use the keyboard to navigate Google's search result page.
I did turn off the Instant Search to disable Keyboard Navigation, but the blinking cursor is still blinking on every Google and non-Google web pages.
Next as a standard troubleshooting procedures for strange behavior I cleared cache and cookies , but it didn't help.
I was using Firefox 3.6, so I uninstalled 3.6 (kept my personal information) and installed the latest version (3.6.13), but it didn't fix the problem.
I don't see that cursor in IE. How can I get rid of it?
Thanks in advance.

In Firefox 3.6 and later versions you can disable the F7 shortcut that toggles caret browsing by setting the pref accessibility.browsewithcaret_shortcut.enabled to false if you do not want to use that feature.
See also:
* http://kb.mozillazine.org/about%3Aconfig
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

Using Dreamweaver to edit *partial* web page (chunks of HTML code)?

Hello,
I am using a custom PHP framework to build a website.
This framework is quite simple, it relies on 2 types of files:
Templates: site-wide PHP/HTML files including all the logic, HTML header (links to CSS & JS files), Company logo HTML menus & related navigation code, searchbox, footer etc. Only 2 templates exist: one for the homepage, another one for all the other pages.
"content files": these files contain mostly static HTML code. Content files are imported by the PHP template using PHP's include() function.
As content files are inserted within a global HTML page, these only contain chunks of HTML code: no tags such as "head" "body".
On the attached PNG, the green part is the code from the template, the red part is the code from the "content file".
A typical template file would be:
          <html>
            <head>
              (load CSS files, JS files...)
            </head>
            <body>
              (HTML headers & menus)
              <?php include($content_file); ?> 
              (HTML footer)
            </body>
          </html>
A typical content file would be:
          <h1>TITLE</h1>
          <h2>subtitle</h2>
          <p>Lorem ipsum<img src="" class="myimg" /></p>
          <h2>subitle</h2>
          <p>Lorem ipsum</p>
Templates are NOT editable by users.
Content files are editable by users, using Dreamweaver.
The problem is, users cannot edit those content files since it is not a valid HTML page. The CSS required to enforce the styles are not loaded since HTML headers are not present. It looks ugly and Dreamweaver tries to insert standard HTML tags such as <html>, <body> and so on.
I see 2 hypothesis, but I cannot find an answer in the Dreamweaver documentation:
have DW edit the content files alone, in which cas we would need to tell DW that it is editing a partial web page and not a full one
have DW edit the content file while applying the PHP template, in which case we would need to tell DW that is should discard most of the code and save only the "content file"
Hypothesis 1: Standalone edit of content files. Is there a way to tell Dreamweaver
that it is editing a partial HTML file,
that it needs to load additional CSS stylesheet to display the styles
that it should not insert standard HTML body and headers tags, that we know the page is not standard compliant as-is
that creating additional style is forbidden, it is only allowed to use styles defined in the stylsheet
Hypothesis 2: Edit of content files within the template. is there a way to tell Dreamweaver
that it is should add HTML code from the template before and after the loaded "content file"
that when saving the "content file" it should discard all HTML/PHP code from the template, saving only the content itself
that creating additional style is forbidden, it is only allowed to use styles defined in the stylsheet
I cannot believe noone has been faced with this problem before, the fact is I cannot find any answer about this issue.
Best Regards,
M

I have moved this thread to the Dreamweaver Application Development forum, which deals with PHP and similar issues.
Several things spring to mind.
Do your template files have a standard .html file name extension? If so, you could add .html to the file types that Dreamweaver does not automatically rewrite. Select Code Rewriting in the Preferences panel, and add .html to the list of files in "Never rewrite code".
If your template files use a file name extension not recognized by DW, add them to the list using the instructions in http://go.adobe.com/kb/ts_tn_16410_en-us. You might also need to add them to the list of files that DW doesn't rewrite.
To get access to styles in pages that are composed of fragments, use Design Time Style Sheets. See http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7e17a .html.

Web pages load slowly using Safari, Firefox, and Chrome.

Web pages are loading slowly now on my mid-2008 iMac 2.66 Ghz Intel Core 2 Duo.
Doesn't seem to matter if I use Safari v5.1.10, Firefox v29.0.1, or Chrome v34.0.1847.131.
Problem started about a week ago mostly with YouTube but now I have issues with almost all web pages loading slowly, including this one.

Try resetting both your Intenet MODEM/Router by unplugging them, waiting 15 to 20 seconds then plugging them back in.

Can I use Adobe AIR applications in web pages?

I want to use an air application in web page .can I do this?
please help me!

If you haven't used any AIR specific packages then the swf is same as the flash SWF for web and you can use it directly.
Somebody correct me if I am wrong...

Slow web page loads on Mac, but not for PC

I use a D-Link wireless router (DI-524) for my PowerBook G4 15" and my roommate's Dell PC. Very recently I seem to get very slow web page loads with some pages not even loading at all.
Airport is consistently connected with no drops at all and when I'm downloading something it never gets interrupted the whole way through.
My roommate's PC has no problem whatsoever and all of the web pages that he visits load instantly. It seems that my main problem is with web pages.
I've tried doing a clean install on my Powerbook, I've tried resetting the router (I've tried upgrading the firmware but the router decided it didn't want to work with the new version). And surprisingly, I get the same slow speeds when I hook up my Powerbook to my router via ethernet cable. The only time my speeds are perfectly fine is when I hook up my Powerbook directly to the wall (I dorm in a university so we have a T3 line).
Can someone please give me some advice on this very frustrating issue?

In addition to Neds suggestions, empty the Safari cache (which should be empty after a clean install).
Goto the Safari Get Info screen (in Finder or in Dock if you have Safari there), click the triangle on languages, and disable those you don't use.
My Safari response time was significantly slowed after the 10.4.5 update, and using the combo updater took care of that. The 10.4.6 combo update is located here.

Web pages load SLOW on IPad: how to disable DNS prefetching; other ideas?

Brand new IPad 16 GB WiFi + brand new Airport Extreme in bridge mode. Comparing IPad web page load speeds with side-by-side WinXP computer running IE8. Any web site will do: take www.apple.com if you want.
Problem: IPad web pages generally load much too slowly compared to IE8 on a computer 6 inches away on the same Airport Extreme network. Maybe twice as slow at worst, occasionally not much slower, but generally pathetic and annoying. WiFi signal strength is "excellent". Airport Extreme network is working great with all my (Windows) computers and devices except the IPad.
I already switched to OpenDNS on my Airport Extreme; didn't help noticeably. I would like to try disabling DNS prefetching in Safari, but don't know how to do it on the IPad. Question #1: How do I disable DNS prefetching? Question #2: Any other suggestions for this embarrassing (to Apple) problem?

I'm experiencing a similar problem with a new iPad 2 using iOS 4.3.3 connected to the Internet via Time Machine to a DSL line. The Speedtest X HD App shows the connection speed to be fine (about .6 Mb / s). The problem is only with accessing web pages. I frequently get a "server not responding" msg. There is no problem when I connect the device via USB to an iMac, only through wifi. The iMac itself (Intel with OSX 10.6.7) periodically experiences problems (both Firefox and Safari): I have learned to solve it by cleaning out cache and fixing disk permissions periodically. I've tried cleaning out cache on the iPad, deleting cookies and erasing web history, but that doesn't seem to make any difference. The problem reminds me of an old VNC problem: you had to allocate a large amount of cache or streaming would stall. This is also happening with the iPad 2. Maybe the problem is a DNS channel issue but my impression is that it is somehow related to a memory or cache issue with the iOS device or to Airport. I've occassionally experienced similar slow page loading problems with other Airport connected devices--it varies from device to device. It seems to be a client-side software or caching problem.

Web Server NetworkTopology - Reduce Web Page Loading Times

Hello,
Not sure which forum is best to approach because I think my setup and requirements may fall into several areas of consideration, but here goes. With reference to the diagram below:
Basically I host my own website using IIS on a W7 box that sits behind my Windows Server 2012R2 box that I use as a DNS server with the following roles:
Routing and Remote Access, DNS Server, AD, NAT
What I'm wanting to do is to change my network configuration to the bottom diagram i.e put my webserver in front of the the windows server so that it is internet facing without having to route HTTP requests through my server machine, the objective is to
limit the hardware that HTTP requests need to travel through in order to speed up the web page loading times. I have tried the new preferred configuration but I am actually finding that the web page takes another 10 seconds longer to load with the new configuration.
My DNS server is authoritative for my website domain name, my idea or understanding for the new configuration is the following: (this may be wrong, not sure!)
Someone browses my site i.e makes an initial DNS request for my website, the DNS inquiry is passed through my hardware firewall to my DNS server, the DNS server then points the DNS request to the webserver box, then when an HTTP request for website is received
by my hardware firewall, the firewall redirects the HTTP request directly to the webserver.
I thought that the above new configuration would actually speed up the web page loading response time as the HTTP traffic would no longer have to travel through my DNS server before reaching the webserver and then make its way back to the remote host across
the WAN
Can someone please tell me where I am going wrong with my configuration? thanks in advance

Hi,
Is your website loaded very slow?
If yes, please try to perform a network capture on the client. We can find which part is slow by analysing the capture data.
If the DNS process is slow, please try to use nslookup to verify if it is a DNS issue.
If the HTTP process is slow, please check if there is any tcp retransmission in the capture data.
Best Regards.
Steven Lee
TechNet Community Support

WRT350n Firmware Update 1.03.7 - Web page load really slow after update

Well I updated my WRT350N with the new firmware, but now web pages load very slowly, and streaming video is even slower. Before the update it was blazing fast. I run a mixed network of wireless N and G. Both Wireless N connections connect at 200 or higher Mbps now, which is a great improvement.
Anybody got any ideas why web pages and steaming video run so slow now.
Also downloading files never goes above 30 kb/sec now.
I use comcast cable and downloads were so fast before.
Thanks in advance.

check the download speed and the streaming video when the computer is directly connected to the modem

PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up.

PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up. My preferred web page "A" is still shown on the settings under -Tool-Options-General, home page address is correct and home button works correctly.
Some file somewhere is forcing this page upon startup. I would like some ideas where to look.
I have run various utilities such as AVG, Tweaknow, and spybot s&d newest version.
Its just annoying to have to look at Yahoo Brazil upon startup
A few months back, someone suggested some reset setting in Firefox, boy what a mistake, took a long time to get things back the way I like them, and it didn't work.
I see this in the troubleshooting info ???
"browser.startup.homepage_override.mstone": "19.0",
"browser.startup.homepage_override.buildID": "20130215130331",

The prefs that you posted are normal for a Firefox version (in this case Firefox 19.0.
Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 19 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

My Internet Connection is Fast, but Web Pages load slowl

I have tested my connection on several websites. I am using RoadRunner and I consistently get speeds between 3500-4500 kbps. In the past few days I have the same internet speed but all my web pages load really slow. Up until this problem I would click on a link and it would take 2-3 seconds to load the next page. Now it is more like 15-20 seconds. Once I get a page loaded if I download something from that site it is still a fast download.
Any ideas on what could have slowed loading web pages , but download speed still shows really fast?
Your help is appreciated
Cheers
mrjazz

If your download speeds are still fast, it is most likely the broswer that is slow in rendering the pages.
Are you using Safari and if so, do you leave it open all the time? Safari is notorious for hogging RAM and CPU cycles and slowing to a crawl if you do not quit and restart it.

After upgrading to 8.0 the add-on compatability tool runs and the Getting Started web page loads every time the browser starts.

After upgrading to 8.0 from 7.0.1 every time I start FF I get the add-on compatibility tool to run and the Getting Started web page loads along with my homepage in separate tabs as well. So far I have tried running the installer again, disabling all add-0ns and custom settings and restarting and turning off automatic updates. Nothing worked there. I got the same behavior each time. I don't know what else to try other than a full uninstall and reinstall. Something I'd like to avoid if it's possible because of the time involved. This is the second time I have posted regarding this issue. The first time I didn't get a response. A solution or a possible workaround would be greatly appreciated if anyone knows of any. As a staff member and a global forum moderator for an anti-virus company I understand how hectic things can be at times but some feedback, good or bad, on this issue would be very welcomed! Regards, Ritchie...

Hi michaell, thanks for the reply. I tried everything in the Preferences are not saved link you provided and nothing worked there. If creating a new profile will delete all my add-ons and custom settings I might as well just do a complete uninstall and reinstall. That actually would be easier. That article told me how to save my bookmarks though so I don't have to loose those which is nice. I don't know if this makes any difference but there is a discrepancy between the preference file in the article which is: prefs.js and what's showing on my PC which is: prefs with no .js suffix. I tried to rename the file to prefs.js and restarted. No luck there either. It just created another prefs file. I guess we've pretty much exhausted all the avenues to try! I'm just going to go ahead and do a reinstall when I get the time. Thanks so much for your help michaell. I do appreciate the effort. Regards, Ritchie...

Hyperlinks used to appear red when web page loaded, now I have to hover to show them, this is before the upgrade.

Similar Messages

Maybe you are looking for