Hyperlinks with red and blue bordersHi

Hi,
I have a HTML file with three jpg images. I created hyperlinks to websites for all 3 images. However, I get this blue and red border around the hyperlink when I preview it in my web browser. Not sure why this is happening....
Any help is appreciated. Thank you!

Link borders on all images can be removed by adding this to your CSS code:
a img {border:none}
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Similar Messages

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

Hello zukafu,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Why am I getting a red and blue haze over my oil paint filter effect in photoshop cs6?

Why am I getting a red and blue haze over my oil paint filter effect in photoshop cs6? I am currently using a trial version.

The last time someone reported this problem with Oil paint, the fix was to go Preferences (Ctrl k) > Performance and set the cache levels to something other than '1'. If you cache levels were not previously set to 1 then we'll need to think again.

Opening photo in camera raw using cs5 and photo has lots of red and blue in the image?

I am trying to open a photo in camera raw and the image always has a lot of red and blue in the picture? What can I do to avoid this. When I first started learning photoshop this did not happen?
Thanks and any help would be greatly appreciated.
CT

Perhaps it would be helpful if you'd post a screen grab showing the problem. I honestly can't tell from what you're writing whether you're seeing a bug or maybe you've saved some oddball Camera Raw Defaults.
Considering it could be the latter, have you considered setting the image development settings for that image to defaults, or even Resetting the Camera Raw Defaults (which will affect all images in the future)?
-or, if the above doesn't fix it-
-Noel

HELP!! lightroom 2.5 red and blue lines.

Hello to all, Reacently I upgraded from 1.x to 2.6 and now my previews show a sort of red and blue lines around the highlights, that doesn't bother me at all, the big issue is that such lines appears in the prints from lightroom. And that's not all those line also appears in the exported to photoshop.
My raw files directly processed (in PhotoshopCS3) doesn't show any problem.
Thanks!!!

Are you using a PowerPC (e.g., G5 Mac) machine?
Your thread title says "2.5" but your original post mentions upgrading to "2.6" ... I bet you're actually using 2.5. Is that right?
If the answer to both is yes, then yes, this is a known issue for specific camera models. It is fixed by updating to 2.6.

My ipad will not turn on it will be black then i slide ny finger at the bottom and it will be like purple and red and blue then it will go black again i dont know what to do.

my ipad will not work it will be black when you hit the power button thn you slide your finger at the bottom like you are unlocking it even though you cant see the screen. then it will show like purple,red, and blue picture for half a second then it will go back to black. I dont know what to do.

Hi dbailey,
Try resetting it (nothing will be lost): Hold down the Home and Power buttons and continue to hold them down until the Silver Apple appears (up to 30 seconds). If that works, then within a minute or so, you should see the Home Screen and be able to proceed normally.
Cheers and good luck!
GB

Addressbook import: Difference between red and blue

Hey all,
I was updating my addressbook by importing addresses from vcards. I had several duplicates which were just updated and added information in that addressbook entry. I noticed that there are red and blue colors denoting the changes (what I'm assuming). What's the difference between the red and blue?
thanks.

Blue means an addition of data, and red means a modification of data. If you're reviewing duplicate contacts, the window has four buttons at the bottom that will give you different views (and different end results) of the duplicate contacts:
"Keep Old" means do not accept any of the changes from the imported record
"Keep New" means discard the current record and instead, use the imported record
"Keep Both" will keep both the current record and the imported record
"Update" tries to intelligently combine the two records, treating the imported record as if it has the newest, most trustworthy information

Aliasing on Red and Blue color in ALL Flash Player video playback (including YouTube)

We have noticed that Flash Player does not smoothly decode the colors red or blue in video files (such as YouTube/Vimeo/similar), resulting in nasty aliasing on text/edges of solid colour. The problem occurs on both Mac and Windows platforms, tested with Flash Player 11.3 to 11.5 and demonstrated using the video below:
https://vimeo.com/51914568
This video shows the issue clearly (you can switch between Vimeo's HTML5 Player to Flash Player. The red and green text is smoothly displayed in HTML5 Player or VLC/Quicktime Player). Note: watch in SD, not HD:
Only with Flash Player are edges aliased/jagged where they should be smooth. It's as if the resolution is dropped in half during the YUV decode.
I reported this today as Bug 3351502
Here's hoping Adobe can get this sorted as it means the entire content of YouTube (for example) has poor quality video in Flash player.
You can also clearly see this on this cocacola advert:
http://www.youtube.com/watch?v=S2nBBMbjS8w&feature=relmfu
CB

In general, the most expedient way to get your issue in front of an engineer (and to track progress on it) is to file a bug at http://bugbase.adobe.com/
I actually filed a bug on your behalf a while back. It was reviewed by an engineer from the video team, and closed as a duplicate of this bug:
https://bugbase.adobe.com/index.cfm?event=bug&id=3324604
It sounds like the problem is specific to H.264 video encoded with 10-bit color. You could re-encode your videos with 8-bit color as a temporary workaround to avoid the problem. If you're seeing the same problem with 8-bit color, please let me know.
The bug is currently open and assigned to an engineer from the video team.

Need help with pics and blue or yellow tints

All the pictures in the Facebook friends list or games all are distorted and blue. Especially in the" face calls" feature. It is totally distorted and downright scary looking! I'm hoping its an easy fix. ( already tried to change the tint feature to NONE but that didn't work) Its an iPhone5c........... Help please!!!!!!

ok ...all fixed. Don't ask me how, but my granddaughter fixed it when nobody else could. So, anyone else with this problem should hand their phone to a teen.!!

Screen covered with green and blue pixels (visible on dark colors)

Hello,
I have this tablet since beginning of April, and since few days I've noticed the little dots on the top of the screen.
From far away it looks like dust behind the screen, but by having a closer look, it's like pixels that stay green and blue when the rest of the image is dark.It's very visible when I'm using the tablet with no lights around me. i've tried to restart the tablet, and even when It's loading with the SONY sign, I have that! what should I do ? Did people had that issue before ?
(BTW, The screen is also unresponsive when plugged to charge)

I encounter the same problem. I bought my Z2 tablet 16GB from the Singapore Sony Store. I got it for one month and the same pixel problem appeared. I send it in for servicing at the Singapore Sony care centre at 313 somerset outlet.. One week went by and nothing happened. The service was bad, no reply from the customer care or technician. They gave me a website so i can check the status of the servicing but all it shown on the page was pending.. one full week and still pending. I had to call them once and asked them what happened, the Sony personal over the line could only say they can check and get back to me. The next day i called again to check if any technician has even start and immediately right after that they called me to go down to collect. Turn out they are giving me a new tablet. And the screen protector was not refund to me as they said that the device was still in the service centre.. had to buy a new one for myself. Such a disappointment in the servicing.. and now the current one i am holding as the same freaking problem.. also i notice the corners of the screen has some yellowish hue.

Printer aligns BUT only with Black and Blue all other diagnostics print with all colours

Initially when installed the printer REFUSED to align, took 7 attempts (OK I have heard of Einsteins quote !). Each time I used the printer screen to ALIGN PRINTER - the process failed. So I looked on the web, and:
Cleaned the cartridges,
Cleared the vents
Removed and cleaned the printhead
Prayed
Tried again
All to no avail, so then I tried doing the diagnostics via the PC software, and here the mystery deepened.
When running the HP Photosmart B210 Series tool box I got three differing results from the three printing options
A Print Quality Diagnostics Page gave me Ba full five colour printout
Align Printheads gave me black and blue lies/boxes/grids and the Alignement Successful message
Print Diagnostic info gave me all four colours with lots of meaningful info including the 73 Print head Calibration COnfidence Level:0
Any Ideas ANYONE, before I bin this and buy a Kodak or Epson in disgust
This question was solved.
View Solution.

What exactly is the issue? The alignment aligns the color printhead to black printhead, and only one color (cyan for your printer) and black are needed for that. (There is likely an additional set of blocks that prints gray blocks fading to white. This section is used to calibrate the energy for the colors.) The other test pages you printed will print various diagnostic or test pages which will use all the colors.
A successful alignment page requires the page be printed on unused white paper and requires that the black and cyan sections are printing properly.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Centro, when Im on the internet no pictures will show only a small red and blue picture

I don't know what happend to my Centro. My son was playing with it (yeah I know mistake #1) and when I had gotten it back I went to log onto espn.com and none of the pictures would show only a small picture frame with what looks like a sun set over blue waters with a red sky. I went to other websites (cnn, flickr, and so on) but no pitures will show up. What could be the problem?
Post relates to: Centro (Sprint)
This question was solved.
View Solution.

Check your settings in Blazer. Sounds like you've changed it to "Fast Mode" for displays.
Tap the Lightning bolt icon at the top of Blazer, and see if it's set to Fast Mode. Change it to "Normal".
Pictures should load now.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Red and blue arrow missing in outlook 07+10 when sending from iphone

Hello all
When receiving an exchange mail on the iphone 4 I an answer or forward the mail. Usually in outlook 2007 and 2010 that message is attached with a blue arrow or red arrow depending on what action I have taken. I have one iphone it works on, but I have 10 iphones that it dosent work on. I have compared settings and I see no difference.
Do you have a clue?
TIA
Bo

Sometimes this issue is caused by a misconfiguration or incompatibility of the Exchange server, or perhaps by a bug in Mail. If so, you won't be able to resolve it yourself. The fact that your iOS devices may be working well with the same account isn't relevant, because iOS uses a completely different protocol (ActiveSync) to communicate with Exchange servers. By default, OS X Mail uses the EWS protocol.
Each of the following steps has been reported to help with Exchange issues, at least temporarily, in some cases:
1. Back up all data. Open the Internet Accounts pane in System Preferences and check to make sure you don't have duplicate Exchange accounts. If you do, delete all but one of the duplicates. If there are no duplicates, delete the account and recreate it with the same settings. The messages will still be on the server.
2. Rebuild the affected mailbox.
3. Reindex messages.
4. In the Keychain Access application, delete the password item for the account. The next time Mail tries to access the account, you'll be prompted for the password. Check the box to save it in the Keychain.
5. If you've created subfolders of any Exchange mailbox, log in to the server through its web interface, move the messages out, and remove the subfolders. For best results, a mailbox should have no subfolders.
6. Synchronize with the server using IMAP rather than EWS. This is only possible if IMAP is enabled on the server.
7. Consider using Outlook instead of Mail to access your Exchange mail.
See also this discussion.

My MBP keeps freezing with red and black vertical lines. What's going on?

About once a week my early 2011 i7 macbook pro seems to freeze with these weird lines on screen. I was using Adobe Photoshop CS6 and had quicktime playing an mp3 in the background. Nothing out of the ordinary happened that I know of that could have triggered the computer locking up.
I took my MBP to the Apple store and they said it passed all diagnostic tests. They suggested that since it is sporatically happening, it may be weeks before an answer is given to the problem that I am experiencing. Here are some pictures I took when my mac last froze.

Were you ever able to resolve this? My friend's early 2011 MacBook Pro with your same specs except with 10.6.8 just did the same thing while Google Earth 7.1.2.2019 was running. Never any other issues, just happened out of the blue.

Is there a way to convert a Word document with Red and Black into Spot colors in Acrobat X?

Customer sent us PDF files created in MS Word. Of course, Word creates CMYK versions of colors. I need the red text and black text converted into spot colors for 2 color output on press. Is there a way to do this? I saw another thread that said there is a Fixup in the Print Production/Preflight section of Acrobat X that has a convert to Spot, but I'm not seeing that. All I see is Convert to CMYK. I'm using Acrobat X 10.1.13 on OS X. Any help would be appreciated. He also sent the Word docs so I can drop that into InDesign and reformat the whole thing and fix the colors myself but if I can do it in Acrobat, that would be a lot quicker. Thanks!

Frequently in this scenario the red will be 100% of either magenta or yellow with 0% black. In these cases you can merely plate the Black & Magenta (or yellow) for press.
I've created a Preflight Fixup on occasion for these also.
An example shown - Note it requires the document is cmyk. MS Files will be rgb. You could create a Preflight looking for rgb colors.
With Fixup tab selected - Options > Create New Fixup > Type of Fixup - search for Spot in the field

Hyperlinks with red and blue bordersHi

Similar Messages

Maybe you are looking for