Hyperlinks Won't display on page

Frustrated! Never had the problem before. I'm creating 6
pages from a template. The template looks fine but when I enter any
hyperlink in an editable region it doesn't show up. The link works
but it's just a blank spot on the page. Running out of time,please
help.

Post a link to the page so we can see what you are
describing, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Michael JWest" <[email protected]> wrote in
message
news:gboi3g$fh0$[email protected]..
> Frustrated! Never had the problem before. I'm creating 6
pages from a
> template.
> The template looks fine but when I enter any hyperlink
in an editable
> region it
> doesn't show up. The link works but it's just a blank
spot on the page.
> Running
> out of time,please help.
>

Similar Messages

PDF won't display all pages

I'm having problems with a PDF I'm generating, I'm using the presets, never have had the problem before, but some of the pages won't display, there's only a white page. Has anyone else had this problem before? How did you work around it?
Thanks!

Here is a GoogleDocs PDF of the particular PDF I'm having issue with: https://docs.google.com/fileview?id=0BzFhXCwCx4SzZDhiN2FjZWEtM2IyNS00Njg4LWI5NTQtNTc5ZDVlM GNhNWVk&hl=en
Yes, it PDF's on it's own.

My safari won't display home page

My safari won't display my webpage.Just blank.But firefox is fine.Wonder why? I tried the reset on safari but it does nothing at all..Once my safari icon moved to the right all by itself to the right side of the dock.Why? Anyone.

Safari: Mac OS & System Software: Apple Support Communities

Brand new ipod touch won't display home page

Hi Folks
Just bought 2 new Ipod Touch's for the kids for xmas. One turns on fine and went straight to the home page and allowed me to personalise it but the other one starts up and just displays a picture of the USB cable and an upward arrow pointing to an ITunes symbol. It won't allow me to go to the homepage. Have i done something wrong????? Help

It needs to be restored. The only way to do that is to connect it to iTunes and restore as new.

Won't display odd page on right in two-up view

thanks in advance for reading this: I self publish several books of my own. Using InDesign CS3 I've exported them (for years, all the way back to Pagemaker) as a 'book' pdf and with ID's wonderful view pdf feature, I've been able to review them 'two-up' the way they would appear after printing. After CS3 for some reason, I can't get Acrobat to let me view them with the odd page, ie., the first page, starting on the right panel, the even on the left and so on.
At first I thought it was a page numbering or pagination issue from Indd, but....I've gone back to older pdf's in previous books and brought them up in Acrobat and the same thing now appears. Can't seem to find any reference to this in the online help or the local help files.
Any ideas? I'd be most appreciative....

Using Version 8.1.2
Goto VIEW
Then PAGE DISPLAY
Then select SHOW COVER PAGE DURING TWO UP
Seems to work for me, took a bit of hunting to find that, despite Adobe's online help telling me that multiple page documents will always display with the odds on the right to make sense of books!

Site won't display entire page

I have tried to update information on this page: http://ahf.net/aboutUs/donors.html
But every time I "Put" up the page to include the updated information, it cuts the page off and the bottom of the page is incomplete.
What am I doing wrong?

Start by adding a valid document type declaration to the top of your DWT file.
Without a valid doc type, browsers render pages in Quirks Mode with unpredictable results.
Then work through and fix your code errors. You have quite a few which could effect display.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fahf.net%2FaboutUs%2Fdonors.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Image from database won't display in page region

Iâm having difficulty getting an image stored in the database to display in an HTMLDB page region. Iâve consulted the tutorial in Sergioâs Blog and looked for relevant threads in this forum but am still having problems. Any insights into where Iâm going wrong would be very helpful.
Iâm using HTML DB 1.5.1.00.12 and database 10.1.0.2.0 on an x86 machine running Win 2k SP4. My browser is IE6.
First, hereâs the procedure I wrote to display the picture. Although the variable names have been changed this is substantially the same as the procedure in the tutorial:
CREATE OR REPLACE PROCEDURE download_pic(p_personid in number) as
v_mimetype VARCHAR2(255);
v_length NUMBER;
v_filename VARCHAR2(255);
v_picture BLOB;
BEGIN
SELECT mimetype, picture, SUBSTR(filename, INSTR(filename, '/') +1), dbms_lob.getlength(picture) INTO v_mimetype, v_picture, v_filename, v_length FROM TBLPICTURE WHERE personid = p_personid;
owa_util.mime_header(v_mimetype, FALSE);
htp.p('Content-length: ' || v_length);
htp.p('Content-Disposition: filename="' || v_filename || '"');
owa_util.http_header_close;
wpg_docload.download_file(v_picture);
end download_pic;
Enterprise Manager tells me that the procedure is valid, and I made sure to grant execute to public.
Hereâs the source for my PL/SQL page region:
DECLARE
v_personid NUMBER;
BEGIN
SELECT PERSONID INTO v_personid FROM TBLPICTURE WHERE PERSONID = :P5_PERSONID;
HTP.P('<IMG SRC=â#OWNER#.download_pic?p_personid=â || v_personid || 'â>â);
EXCEPTION WHEN no_data_found THEN
HTP.P('No picture in system');
END;
When I run the page my region displays properly but I get the red X where my picture should be. A review of the HTTP serverâs error log tells me that the server thinks my procedure (HTMLDB.DOWNLOAD_PIC) doesnât exist. If I create a second PL/SQL page region and set the region source to just the display_pic procedure by itself, using a static number as the p_personid parameter, the picture displays in my browser, but as the only object on the page. Typing the URL http://localhost:7777/pls/htmldb/htmldb.download_pic?p_personid=1 directly into my browser also gives me the âprocedure doesnât existâ error. So I believe my procedure works correctly but somehow my URL in the img tag is incorrect.
Hereâs my marvel.conf file just in case it helps solve the problem:
Alias /i/ "D:\oracle\product\10.1.0\CompanionCD/marvel/images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BTV4hSLn+NKXXGs045hwqYeJ+u2gWjROPQ==
PlsqlDatabaseConnectString BE4013882062404:1521:Robert ServiceNameFormat
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.WE8MSWIN1252
Again, any assistance that anyone can provide would be very helpful. Thanks!

Robert,
please describe your task correctly:
You want to create a link (in report) with download image capability, or you need to SHOW image in report? This is a bit difference tasks.
I solved this tasks, you can do both capability in one report. It easy.
1. wpg_docload procedure can be used only for download image/BLOB, not show it.
2. For both download/show BLOB you need dual link with two different procedures. One with wpg_docload call for download, another for show with htp.prn (not htp.p!*) call for show. Then you can create call both procedures from your SQL repors select.
3. Viola, all works perfectly.
*Note: htp.p inserts newline after every block of BLOB, so JPEG with size> 32K will be incorrectly shown. htp.prn makes uninterrupted output without newline insert.

The content tab in options won't display the page

I can't get the data to display in this window. I have started having problems with a lot of pop-ups and wanted to check the setting.
Also, I'm sure there must be a way to search in the forums, but I couldn't see how. If someone could answer this one, I might be able to help myself.
Thanks in advance.
v3.6.15

A problem with displaying part of the options windows can be caused by an extension. Try running Firefox in Firefox safe mode, this will disable extensions and can be used to see if one is causing the problem. For details of how to access safe mode see https://support.mozilla.com/kb/Safe+Mode - In the dialog that pops up when starting in safe mode, do not select any of the options, just click on "Continue in safe mode".
If you can access the contents part of the options window in safe mode, the following link shows how to identify what extension is causing the problem- https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Palm TX won't display web page

Each time I try to connect to the web via my wi-fi, I get an error saying the URL may be temporarily available or cannot be resolved. I am sure that the site is active and available, however. My wi-fi signal is strong and is connected, but I continuously get this error with any site.
Post relates to: Palm TX

(Glad to see you're still lurking around here, Wyrenut. Your posts have helped me tremendously. And this comes form somebody who has run and internal developer's support group for quite a few years.)
I also started having this problem after getting my TX hooked up through my home network. I had to set up a wireless access point with only WPA security to get around having to change the WPA2 security on all my other equipment. I applied the ESU upgrade, but that didn't seem to help with WPA2 Personal. Previously, I could get at least half of the pages to come up through the open hotspot in the lobby of our building at work, but I haven't tried that since I applied the ESU upgrade this morning.
I can get to the internet through the access point using a laptop, and I can see the IP address of the Palm coming through the access point on the router's admin page, and the DNS addresses of the PC and the Palm are the same. So I think I'm through, but every page I try gets the 'Page not available' message, even if I enter the IP address of the page rather than the URL.
Is there any other method of debugging available to see if the page is really coming back and locking up Blazer, or whether it's really not coming back at all? Or any other suggestions?
Personally, I sort of liked the old Internet Explorer that counted off how many K were coming through as the page was being loaded. At least you could tell something was happening.
Thanks,

CSS won't display on DW page files to which template is applied

CSS links fine to template, but when applying template to page, styles won't display even though path to CSS file is correct in template.
When file is uploaded to server it links just fine to CSS and styles display online as they should.
See: http://dstall.com/sfm/
But I cannot see page as styled when working on files.
This is very annoying as I cannot see what final output will be when laying out my pages because styles won't display in page files, only in template file.

change this:
<link href="css/sfm.css" rel="stylesheet" type="text/css" />
<head>
to this:
<head>
<link href="css/sfm.css" rel="stylesheet" type="text/css" />
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Photo page won't display properly in safari

Hi everyone!
I'm completely new to building websites and need some of your expert advice?
For some reason my photo pages won't display properly in Safari but ok in Firefox?
It worked fine a week ago and I can't think what I've done wrong since I republished last night?
http://www.abeledo.talktalk.net/losavellanos/House.html
Can anyone help?
I'll buy you a pint!
Cheers

No luck unfortunately.
I changed the background to a solid and made the changes that you suggested roddy, but neither seemed to work. I know I must be doing something wrong? Do the photos appear ok with you roddy? All I see, is half the page i.e nav bar, top image, 'the house & garden etc text and top half of the darker box where the thumbnails should appear. And this happens with all 3 photo pages currently on the site.
http://www.abeledo.talktalk.net/losavellanos/House.html
http://www.abeledo.talktalk.net/losavellanos/Teror.html
http://www.abeledo.talktalk.net/losavellanos/The_Island.html
I've been clearing my cache in both browsers every time I republish.
I've also tried upgrading to the new 3.0.3 beta Safari? You'd think - out of all the browsers- iWeb would work seamlessly with Safari wouldn't you? - Firefox is fine.
Do you think I should start from scratch?

Safari won't display pages

I've looked at some post, but didn't find an answer yet..
I'm running Safari 2.0.4 and since yesterday it won't display some sites ... I am in Austria, and it seems to me as it would only display austrian/germany sites, ?? it still loads every page, but does not display the contend eg when i click the RSS button - it shows the up2date rss feed, but never the actual website ...
I made 2 changes in my System:
1) I installed iwork 08 trial, and therefor
2) a bunch of systemupdates (don't rember exectly what )
i tried resetting safari, clearing the cache, installing (and after failing uninstalling) 3.0.3 deleting com.apple.safari.plist, uninstalled stand and safari block
everything works fine in any other browser (shiira, firefox)
thanks for reading and recommendations
jfkjrii

almost everything .. www.google.com www.apple.com www.digg.com etc interesting www.amazon.com is working though
as said the site is "working" - it gets the favicon it could read the rss feed .. it just isnt displayed

CS4 - Master won't display in first page

Hi,
I have a file that I did not originally make. I have opened this file, imported masters from a template file (that I have made) and applied said masters to all pages in the document.
My problem is the first page. The master won't display. I have tried different masters, both the ones that originally came with the document and my new ones. Nothing. I have checked for white boxes, and nothing is covering the page.
Is there a function I have missed? Or is this a bug? None of the other files I have received from the same company have this problem.
Hope someone out there can help me.

Hmmm, doesn't really ring any bells with me anyway, not that that means much... You say the first page, does your document have spreads? Could it be that there is nothing on the master page that relates to that spread...? Doesn't seem likely.
If one particular document is behaving strangely, a very easy way to check it's not corrupted is export it to inx or idml, depending on your version. See here for instructions.

Web page won't display

when i try to connect my laptop running on vista to the home hub 4 wirelessly it says that it is connected but it won't display any web pages saying there is a problem with the router or modem but my other laptop running on windows 7 has no problems please can anybody help??

As Keith has suggested, check that the drivers for the wireless card are up to date via the card manufacturers website, obviously you will need to do this on your other laptop and if need be download them then transfer to the Vista laptop. Also go into the hub management page and change the security from WPA and WPA2 to WPA only and see how you get on.
See link how to change hub security.
http://bt.custhelp.com/app/answers/detail/a_id/10360/~/how-do-i-change-between-wep-and-wpa-on-the-bt...

Template page won't display on the web.

One of my web pages was saved as a template and won't display graphics when uploaded, just code. It has the extension dwt. I thought probably what I should do is make
an html page copy and use that. I don't know how that is done, or if that would be the best solution. Any help would be appreciated.

You should never publish your Template.dwt file to the web except to have as a backup in case your Template ever becomes corrupted or lost.
Templates are a proprietary DW file type used to create the rest of your site pages. Go to File > New Page from Template. Select your .dwt file and hit create. The resulting new page is a child page based on that main template. Save as index.html (your home page). Repeat with other site pages.
Add editable content to each of your child pages. Everything outside Editable Regions in the template will be populated to all child pages -- very handy for site wide menus, headers, footers and sidebars.
When you edit a template, you must re-publish all child pages based on that template to your server.
For more details on the use of DW Templates, use F1 Help in DW.
Nancy O.

Hyperlinks Won't display on page

Similar Messages

Maybe you are looking for