Hyperlinks work only the first time clicked when published

I am using hyperlinked text captions for slide navigation within a course.  I have placed the text hyperlinks on the master slides so they appear throughout.  The hyperlinks either link to an external pdf (job aid) or to another slide within the course. 
When I publish the course, the hyperlinks only work the first time they are clicked.  All other times, I get the hand cursor when I roll over them, but nothing happens when I click.  Is there a setting somewhere to allow for infinite clicks on they hyperlinks?

Hi there
Odd that this would happen. There is no setting I'm aware of that determines the number times a link may be clicked.
My guess is that something else is going on. Normally, the slide is paused when the link is clicked. Is this the case for you? One thought is that by clicking the link, the pause is released and perhaps the link is then no longer active because the playhead reached a different spot?
Cheers... Rick

Similar Messages

  • Hand off works only the first time

    iphone 6
    macbook air 2012
    hand off always works on the phone...i can see what is on the mac...
    but on the mac i cannot see what is on the phone
    log out iCloud on all my devices...log back in...
    it works on the mac...i see the iPhone app icon on the mac dock left most position....
    i click it...the iPhone app opens on the mac...great!!!
    but when i close the app on the Mac hand off is gone...
    e.g. it works the first time...
    (p.s. phone calls can be made from the mac, message is all synched...that part works...)

    fixed it...
    my behavior was very similar...it rarely intermittently worked...i somehow stumbled on the fact that it was a bluetooth issue...then i finally fixed it...now it works like a charm...here is a post i made after i fixed it...turns out it has to do with allowing "bluetooth and internet connection sharing..."  here is a post a made with my solution...hope it works for you...
    Had a similar problem...
    open an app on mac...can see it on phone...
    open an app on phone...cannot see it on mac...or see it once then its gone...
    my problem (not sure if it is yours)...
    Mac-->System Preference: Sharing
    1. Turn on Bluetooth sharing; 2. Turn on Internet sharing bluetooth PAN...
    worked for me...
    (have not seen anyone or apple post this...they should)

  • I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • Colors not showing up in Photoshop. Worked fine the first day, now when I click on a color it comes out in gray tones. Pop up about RAM storage?

    Just downloaded Photoshop and there was a pop up box that mentioned my RAM and something about not enough RAM left for certain 3D features, filters, and image/color graphics(?). I continued. Everything was working fine the first time I went to use it, but the next day I opened the program and could not get any colors to show up. How can I fix this?

    Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
    Benjamin

  • App file sharing: files are displayed only the first time...

    clicking somewhere else and then back to the application that you want to share files are not there any more.
    I've to close and re-open the itunes in order to see them again.
    itunes is running on windows 7 64bit.
    is this a bug ?
    thank you.

    Hi! I have the same, exact problem. The files are displayed only the first time I look at the apps listed under File Sharing. If I look at another app on the list, the files on the one I previously checked are gone when I look at it again. Is there any way to fix this? I have a Lenovo X61s on Windows XP Professional 32 bit.

  • Taking action only the first time an event executes

    I want a certain action to occur only the first time an event handler for a button is called. Is there a simple way to do this?
    Bill F

    There are two pretty easy ways to do this.
    If you want to continue to trap other events (other event cases in your event structure), use a shift register:
    1. Add a shift register to the loop containing your event structure. (right-click on the left-hand border of your loop and select Add Shift Register).
    2. Wire a numeric constant = 0 from outside the loop to the input (left-hand) terminal of your shift register.
    3. Inside your event structure, in the event case you want to handle only once, put a case structure around the code you want to execute only once. That code should be within the True case.
    4. Add an Equal To 0? function (from the comparison palette) to the loop. Wire the input shift register to the input of Equal To 0?. Wire the output of Equal To 0? t
    o the selctor for your new case.
    5. Within the True case of your new case structure, add a numeric constant = 1. Wire that constant out to the output (right-hand) side of your shift register.
    6. Within the False case of your new case structure, wire the input side of your shift register to the output tunnel created by the wiring in step 5.
    This way the event structure will keep running and handling other events, but the case you just modified will only run the first time: the first time you get the event, the shift register will = 0 so you'll execute the True case of your new case structure. Within that case, you set the shift register to 1. The next time you get that event, the shift register = 1, not 0, so you'll execute the False case and not the code in your True case.
    If you want to stop all event handling after the first event and your event handler is the only thing with its loop, from the event case (for the event you want to stop on), wire a True boolean constant out to
    the Stop terminal of the loop containing your event structure.

  • QuickTime launches slow but only the first time

    QuickTime is slow in Mac OS 10.7, that's been widely discussed.
    In my case, QuickTime is slow to open up a video file (MP4, AVI, WMV, etc,), but only the first time.  After I've successfully opened up the one video file, all subsequent video files open up quickly, even after quitting QuickTime.
    However, after a restart it's the same old situation again.
    Is QuickTime installing something, then removing it when the computer shuts down?

    QuickTime is slow in Mac OS 10.7, that's been widely discussed.
    In my case, QuickTime is slow to open up a video file (MP4, AVI, WMV, etc,), but only the first time.  After I've successfully opened up the one video file, all subsequent video files open up quickly, even after quitting QuickTime.
    However, after a restart it's the same old situation again.
    Is QuickTime installing something, then removing it when the computer shuts down?

  • HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    The warranty is only good in the U.S.
    You woulod have to send it to someone in the U.S.  They could take it in and if it is defective, then it would be replaced.

  • I have deleted the calander on iPhone 4wheb tried to activate icloud for the first time. When I switch it off I  have probably chosen the delete from my device option

    I have deleted the calander on iPhone 4 .
    wheb tried to activate icloud for the first time. When I switch it off I  have probably chosen the delete from my device option

    Have a read here Transferring files from one User Account to another
    Stefan

  • Wait cursor appears only the first time... unless I don't move the mouse!

    Ah yes, another cursor problem:
    I am setting a wait cursor in my main JFrame when a key-release or a menu item click is detected (the time-consuming action is then triggered in a child JInternalFrame), and so far, it's been working great.
    Then I noticed that the wait cursor only appears the first time the time-consuming action is called (or more precisely, if I never move the mouse, it happens every time as it should, but if I move the mouse, it only happens the first time! Ah, and I noticed I CAN move the mouse but ONLY when it is in the form of the wait cursor!).
    Strangely, I can see the cursor blink briefly when the action is done, precisely when it should be changing back to the default cursor... what gives? If I close the child internal frame and re-open it, I can get the wait cursor again the first time only (again, unless I keep the mouse still, in which case it works great - argh).
    Any ideas would be deeply appreciated!
    Cheers!
    PS - Here's a snippet of how we set the cursor, this is code in our main JFrame, called via either a keypress event or clicking on a menu item - mostly it's stuff that is unrelated, and we simply set the wait cursor as the very first line, so why in the world would it skip that line???? (the rest of the lines do in fact get executed):
    private void refreshMenuItemActionPerformed(java.awt.event.ActionEvent evt) {     doRefreshMenuItemAction(); }
    private void doRefreshMenuItemAction() {
    this.setCursor(new Cursor(Cursor.WAIT_CURSOR));
    JDesktopPane desktop = (JDesktopPane)this.getContentPane().getComponent(0);
    JInternalFrame activeFrame = desktop.getSelectedFrame();
    try {
    if ( activeFrame instanceof IDataDrivenForm ) {
    ((IDataDrivenForm)activeFrame).refresh();
    } catch (Exception ex) {
    ex.printStackTrace();
    this.setCursor(new Cursor(Cursor.DEFAULT_CURSOR));

    almost...
    I now see that glasspanes are an answer to that question. I got it to work (almost) using a glasspane (see code snippet below). But what I can't quite grasp now is why this code does not work when I call it from a child (contained) dialog (and possibly internal frames as well)??? When I do so, the dialog freezes (the button I pressed doesn't even release) and the cursor does not change to waiting. This time I'm really not sure where to go next....
    I appreciate anyone who has read this far, and would really be indebted to you for some good advice!
    PS - Here's the nifty code, placed in my main JFrame class. I just substituted "this.setBusy(true);" for every place I was manually setting the WAIT_CURSOR in the past (and of course with matching setBusy(false)):
    public final void setBusy(boolean isBusy)
    Component glassPane = this.getGlassPane();
    Cursor theCursor = isBusy ? Cursor.getPredefinedCursor( Cursor.WAIT_CURSOR ) : Cursor.getPredefinedCursor( Cursor.DEFAULT_CURSOR );
    this.setCursor( theCursor );
    glassPane.setCursor( theCursor );
    glassPane.setVisible( isBusy );

  • Exception occurs only the first time

    The server listens on a port to which client connects in applet mode. Every time client connects to server for the first time (i.e. after a fresh server installation), the client pops an exception:
    java.io.InvalidClassException: javax.swing.ImageIcon$AccessibleImageIcon; local class incompatible: stream classdesc serialVersionUID = -3994512798706967451, local class serialVersionUID = -1903458698681874148.Subsequent client connects to server does not pop this exception. i.e. This occurs only for the first time.
    Through posts in forum, I thought that this could be due to swing serialization incompatibility across version.(But in this application both server and client are on the same m/c having a single JRE and JDK, both are of version 1.4.2 )
    But I am not able to reason out why the exception occurs only for the first time and then disappers in subsequent connects. ( despite clearing javaws cache and Browser cache and restarting server ... and it works on RMI mode).
    What could be the reason ?

    Hi
    We recently changed our load balancer to a new load balancer. we get this error only after the load balancer change.
    When the error occurs, I could see ORA-12571 error message only in the application error log. The listener.log has only the following message about TNS 12502. It does not have any message about ORA -12571.
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2202)) * establish * AppName * 0
    12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2203)) * establish * AppName * 0
    12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2204)) * establish * AppName * 0
    12-MAR-2010 12:24:09 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    Thanks
    Ashok

  • Error 1055 occurred at Property Node, only the FIRST TIME I run the VI

    hi !
    I'm managing some object properties with 2 subVIs,
    so I send to the first one a number and a cluster which contains the objects references, so that it controls the "visible" property depending on the number,
    and I send to the second one the previous cluster and an other cluster which contain the objects data, so that it controls the data depending on some parameters.
    VI is better than explaination, so find it attached !
    at the first time you'll run it, the error occurs, so click "stop" button, and run it again, no error, and you'll understand the way it works.
    To fond the error again, just close it completely and re-open it.
    (I built an example VI as close as possible to my real VI, and I get the same error, so I attached only the example)
    hope you'll understand (if no I can explain better)
    thanks a lot.
    Attachments:
    tests erreurs.zip ‏57 KB

    yoz'st wrote:
    smercurio_fc a écrit :
    You have to write to the control/indicator the local variable points to.
    sorry but I don't really understand this... (I'm french).
    A local variable points to a control or indicator. To "initialize" it you have to write a value to it. Or, you can set the value of the control/indicator to a default value.
    I tried to use globals, but the same error occurs...
    Of course it will. Because you're not understanding that you have a race condition. http://en.wikipedia.org/wiki/Race_condition

  • Time machine would back up only the first time after I shut off my imac and started it up again.  Then it would fail or claim it could not locate my external Hard Drive even though it's icon was showing in the time machine dialog window.

    Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off.  All other back up attemps fail.  Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function.  Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
    The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity.  I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired.  The external HD is not S.M.A.R.T. supported.
    I haven't tried replacing the cable yet. Is that the next thing I should try?

    What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

  • BATCHINPUT: Screen appears only the first time

    Hi everybody,
    I have the following situation in R/3:
    On transaction ABZON when the user selects this transaction for the first time, appears a window asking for the company field (BUKRS). If the user enters the same transaction again without login off, that window doesn't appears going directly to the transaction's main screen.
    The problem is that I have to make a batch input of this transaction but doesn't want the user to logoff every time it needs to run the batch input again.
    How can I avoid that screen to appear or force the batch input to always show that screen.
    If anyone can help me will be appreciated.
    Thanks,
    Orlando.

    Orlando,  I've ran across this is same problem in another transaction.    What I did was I "separated" the transaction.  Meaning the first thing that happens when the transaction runs, is to take care of the window that appears only once during a log on session.  Then later when doing the BDC to actually do something, it will not need to have this part of the recording.
    So for example, do your recording for the window that pops up enter a value, and back out of the transaction.  Call this BDC code before doing any of the rest of the transactions.  Not that the value is filled, it will not pop up again during the rest of the session.  Call your BDC to process the rest of the transaction.
    Regards,
    Rich Heilman

  • RemoteObject FAULT handled only the first time

    I'm creating RemoteObject and then handling the fault event
    myRemoteObject.addEventListener(FaultEvent.FAULT,
    faultHandler);
    protected function traiterFaute(event:faultHandler): void
    CursorManager.removeBusyCursor();
    mx.controls.Alert.show("An error has occured");
    Why this event is only handled the first time ?? So in this
    cas the Alert Box is appearing only on the first fault !!!
    Is it normal ,

    I ended up creating a new RemoteObject on each request. Seems
    terribly inefficient, but it's the only thing that worked.

Maybe you are looking for