HyperTrends not collecting/displaying data and no alarms displayed

Hypertrends quit collecting/displaying data. Alarms are not being displayed in alarm window although alarm processing is working as evidenced by DDE link to callout software.

Is the hypertrend on the server computer or the client computer?
If you reopen the process, will it recover?
Did anything change, such as the network, the firewall?
Go to MAX to see if the data is logged in the database. What's the Lookout version?
Ryan Shi
National Instruments

Similar Messages

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Displaying Date and Time in portal desktop

Hi
I have been looking around for any info or guideline to display the date and time in the portal desktop. I could not find anything very helpfull. In visual admin you can swap lastname and firtsname and vice versa. Thou there is nothing about displaying date and time.
Is it possible to display it and how?
Thank you for any information
Namira

Where u need the time to be displayed.. If it has to be displayed in Masterhead you can programatically display it...
import the par file for Masterhead, change it and replace it..
Its a simple JSP page so that u can change it easliy..
cheers
gEorgE

Can we display date and time in a movie

I am filming a production process and would love to be able to display time of day as the video is playing.
I can see this info while editing, but I don't know if iMovie'11 will let me display this info onto the movie itself? I need to pass these clips to someone who doesn't have any editing tools, but they will be interested to review the events on the tape relative to the time of day that they occurred.
It would be cool if iMovie had a title effect that 1) displays time and date info, 2) let's the user edit the format of the displayed date and time, and finally, 3) lets the user move this title information to a location in the tape that won't obstruct the critical elements of the movie.

Thanks Appleman 1958!
This helps, but to your point, it doesn't show seconds, and it doesn't show frames (for the video purists out there).
Limited to no more detail than minute data, it is not too useful for me, but I could see this being fun in a fast motion shot.
Also nice for capturing day and time of day information for a vacation video.
For my application, all activity took place in 5 hours, and I would need to see down to the second (and ideally the frame) when specific actions took place.
It would be awesome if Apple would let us
1) edit displayed information (lets say for example turn off date, but show hours minutes seconds and frames)
2) edit the font & font size
3) allow flexible placement of the information window. The default location may be where major action is.
Again, thanks for pointing out this title!

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

How to display date and time on jsf page

Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42

Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain.

Data Transfer Not Up-To-Date and To Be Archived at Project definition ?

Hi All,
I want to know about the statuses "Data Transfer Not Up-To-Date and To Be Archived at Project definition level?" In documentation Flagged for Transfer and To Assign are only mentioned.
Thanks and Regards,
Arti.

Hello Arti,
the system sets this status when there is a problem with the replication. For example, in the customizing of your project type (accounting area) you have defined the type of transfer as 'Automatic as of release of project'.
Now, for example, you have a project that has status 'Created - Transferred - Data Transfer Not Up-To-Date - Assigned', this means that the replication is not yet complete because according to the customizing setting you need to release the project first.
Hope this helps!
Best regards,
Silvia

HT201263 my phone can not going upto date .and can not open.only coonnect to itune pic is on the mobile when i switch on

my phone can not going upto date .and can not open.only coonnect to itune pic is on the mobile when i switch on

found the solution on the forum already!

I keep downloading 5.01 and it tells me I am not up to date and at risk

My version of firefox is quite old. I keep being told to download a newer version - 5.01. I have now done this 4 times and once downloaded I get no response. I have tried shutting down my laptop and restarting but the same thing happens. If I ignore it and proceed I get told my browser is not up to date and I am at risk.

Your UserAgent string in Firefox is probably messed up by another program that you installed, and websites ''think'' you are using an old version. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter = '''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. 
Then restart Firefox

File window not updating modif. dates – and mysterious parallel universe discovered

The day started innocently enough when I tried to edit some <meta> content on a site I'm building and then saved my work. Little did I know...
DW's "File" window refused to update the "Modified" column of the files I worked on. Open and closing the files shows that my changes have been recognized and incorporated into the HTML, and the files show up with correct modification dates in Finder (I'm on a Mac). They just won't change date in DW.
When I upload the modified-but-not-redated-in-DreamWeaver files to my remote site, they appear with the incorrect dates on the server, but a text comparison in DW shows that my local and remote files are synched.
Now for the truly weird part: when I run the site in Safari (after flushing its cache), a Source check shows the old code is still operational. (I also changed the titles of the pages in question to quickly confirm which version was being displayed. This check shows the old title displayed.)
Here's the site address: http://www.bearriverbooks.com/index.html
Now for the truly, truly wierd part. I have a parallel site ( http://www.queen-of-the-northern-mines.com/index.html ) which contains copies of the bearriverbooks.com files. These files, too, show the wrong modification dates in DW's "Files" window and on the remote server – but they display correctly. Anyone who wants to check can compare page titles, which are longer in the later pages with correct code.
I checked the remote site addresses in the "Manage Sites..." center. I have not crossed my wires there (though I can smell a few arcing badly in my brain.).
The players: 2.8 GHz Intel Core i5 27" iMac running Mac OSX 10.6.7 / Dreamweaver CS5 v.11.0 Build 4964
Thanks in advance,
Richard Hurley
Grass Valley MultiMedia

I am having the same issue on a Mac 3.4Ghz i7 running Mac OS 10.7. I have Dreamweaver CS 5.5 v.11.5 Build 5344.
I have a linux webserver, running ProFTPD v.1.3.1
Both my mac and my linux server are set to the correct date and time.
And ls on the linux servers tells me the files have the correct modified date and time, but this is getting lost in translation to dreamweaver when I view the remove server in the File tab.
Any help appreciated.

Display date and Time in Oracle Application Express Page

Hi
I have a requirement of showing the date and time in the top left corner of the page which should be updated at all times . The format is DD-MON-YYYY HH24:MI:SS.
I am able to display the date but not the time . Also the time should be updating on its own to the last second.
Another requirement is that on selecting a particular value from the drop down the table values displayed should be filtered
Thanks in advance for helping me out
you can also send in the responses to [email protected]
Regards
Jude Franco

Hello,
I am able to display the date but not the time Probably due to your NLS settings not displaying the time component for dates. However you can manually specify the output format like this -
jes@DBTEST> select to_char(sysdate, 'HH24:MI:SS DD-MON-YYYY') as TS from dual;
TS
10:47:45 10-DEC-2008
Another requirement is that on selecting a particular value from the drop down the table values displayed should be filtered Really need more details on that (remember assume that we know nothing about your requirements other than what you tell us). However at a high-level you need to include the drop down value in the query predicate used for your report, for example -
select
e.ename,
e.sal
from
emp e
where
e.deptno = NVL(:P1_DEPTNO, e.deptno)Would use the value from the P1_DEPTNO select list (presumably displaying department names) and use it to filter the result. The NVL is there so that if no dept is selected then the query by default shows all the records.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Display data and iframe side by side

Hi Experts,
I have a requirement like to display the header and item details on left side of the page and another webpage using iframe tag on right side. How is it possible? I should not use the tabstrips.
Can anybody please help me out how can I display the data and iframe side by side?
Regards,
Ranganadh.

Hi Ranganadh,
First you need to create a BSP page that holds the header and Item details(Let's say this as custom.htm).
Secondly create a new page with frame set tag and call the custom.htm page and other webpage with URL.
Sample coding will be like
<%@page language="abap" forceEncode="html" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design = "classic+design2002+design2003"
 controlRendering = "sap"
 rtlAutoSwitch = "true" >
<htmlb:document>
 <htmlb:documentHead title="Testing for Frames" >
 <frameset cols="50%,50%" framespacing="0" frameborder="0">
 <frame name="menu" src="h t t p://www.google.com" scrolling="auto" noresize>
 <frame name="main" src="h t t p://www.yahoo.com" scrolling="auto">
 </frameset>
 </htmlb:documentHead>
</htmlb:document>
</htmlb:content>
In the above code replace "http://www.google.com" with your custom.htm page
Remove spaces between http and noresize will not allow user to resize the frame.
Regards,
Ravi
Edited by: Ravi A on Mar 14, 2011 7:32 PM

Bug or Feature: pictures not ordered by date and time taken

Is this a bug or a feature?
Pictures are not displayed in the sequence (order) they where originally taken (timestamp of the camera), when
- importing pictures via camera connection kit
- importing pictures via photo stream
- when editing pictures these.
I believe, Apple chose the date and time the picture file was created or last edited.
I'd rather have the pictures sorted by the time they were taken so I have all pictures in chronological order.
What about you?

Hi
I had a lot of problems sorting the display order on my two iphones and ipad
The order displayed is 'Date taken' and then 'Date modified', but any photo without a 'date taken' will appear at the bottom , not the top
goto to this link, have a read of my post
https://discussions.apple.com/message/21098432#21098432
Hope this helps

St03N not collecting all data

HI
does anyone know why would st03n not collect all proper data, we found out recently that a user had scheduled a program as a background job to run and it ran successfully but when we look on that date we don't see that it had run and even that user doesn't come out in the history
any ideas why?
regards

Sorry Sujit that I wasn't clear
the job i was referring to was a z program that was run be a user in the background.
that is how we started knowing that there were missing data in st03n
we were trying to see how many time that program ran and who ran it
so we went to see in st03n but we found out that there was no history for that program in there or any history for the user who ran the z program in the background.
there is no connection to SAP_COLLECTOR_FOR_PERFMONITOR background job. this job is running successful in our system and all other data is being collected
so the data that was missing was on the 14th of march and then we found out that there is no entry of any sort in st03n for 15th of march, but we have data for 16th of march.
so now we want to know what happened
i hope this is clear now
regards

HyperTrends not collecting/displaying data and no alarms displayed

Similar Messages

Maybe you are looking for