HyperX ram weird issue

hey guys,  i just bought some Kingston HyperX dual channel ram model KHX3200ULK2/1g basically the fastest one 2-2-2-5 and 1 gig of it
im running amd 64 3500 winchester model 90nm in an MSI K8T Neo2 with bios 3.2 the newest one
ram is running in dual channel, or at least posting, but it starts at 2.5-2-2-5 with CAS latency at 2.5.... as soon as as i booted in bios i changed it to 2, but it still ran at 2.5 cas latency .. so then i switched to manual ram config, and it now runs at 2 CAS Latency, and i can even get 2-2-2-5 but the problem is, no matter what i switch it to it changes the FSB and mem speed to 100MHZ/200FSB, and i know i should be getting 400FSB, so basically, if i switch to manual ram configuration, it changes speed to 200FSB/100MHZ
while 2.5-2-2-5 isnt soo bad, i wanted to get 2 CAS latency and i know its possible because ive read somewhere of someone that had the same ram and got 2-3-2-6 which is what i should be aiming at if i cant get 2-2-2-5 .. also .. should ram burst lenght be at 8 or 4?
thanx for input =D

The K8T Neo2 boards are a little strange when it comes to CAS 2 memory. It's not the frequency, mine runs 2-2-2-5 1T up to 217 MHz. But to get there, I have to lower the cpu multiplier and raise the reference clock, then set the RAM limiter to 333 MHz. Then it works fine. On almost every K8T Neo2, it will not run CAS 2 at DDR400 with default cpu multiplier and reference clock.
@Madmonk888:
Try the following setup:
*enable PCI lock, AGP frequency at 66 MHz
*disable D.O.T.
*cpu multiplier at 9 (your current mp is 11 if I'm correct)
*FSB at 245, so that it will set the cpu frequency at 2200 MHz again.
*RAM limiter at 333, timings at 2-2-2-5 1T, burst length 8.
I'm not sure (because I have a different cpu), but I think this will set the RAM divider to 9/11. Reference clock 245 * 9/11 = 200,45 MHz. That should do the trick, and still, you would not be overclocking your cpu or DRAM. You can also set the cpu mp to 10, RAM limiter at 333 and reference clock around 240. This will give you 200 MHz DRAM frequency as well, but you would be overclocking your cpu to 2400 MHz... 

Similar Messages

  • Gnome 3.16 resume from suspend weird issues

    After upgrade to gnome 3.16 with gnome-shell 3.16.1-2  and gdm 3.16.1.1-1, also with previous 3.16 versions, after I suspend to ram for some time and resume from it, the gdm window freezes and cannot input. After some tty switching using ctrl+alt+f1/f2/f3, the login window becomes usable slowly. And after I unlock it with password, the desktop and running applications shows just fine on tty2. But now when I switch to tty1, there is still a gdm login screen, if I login into it, tty2 shows, and switching to tty1 the gdm login is still there, still usable. Anyone see same things?
    Some gdm logs by  $ sudo journalctl -b|grep gdm
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) config/udev: removing device AT Translated Set 2 keyboard
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) evdev: AT Translated Set 2 keyboard: Close
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) UnloadModule: "evdev"
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: releasing fd for 13:70
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) systemd-logind: failed to release device: Device not taken
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 44 paused 0
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) AT Translated Set 2 keyboard: always reports core events
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event6"
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) evdev: AT Translated Set 2 keyboard: Found keys
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input22/event6"
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "xkb_rules" "evdev"
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "xkb_model" "pc104"
    Apr 20 17:52:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "xkb_layout" "us"
    Apr 20 17:55:20 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:55:21 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:55:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 17:55:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 17:55:54 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 17:55:55 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 17:55:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): resizing framebuffer to 1920x2160
    Apr 20 17:55:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 17:55:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 17:55:58 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Shell.CalendarServer'
    Apr 20 17:55:58 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activated service 'org.gnome.Shell.CalendarServer' failed: Process org.gnome.Shell.CalendarServer exited with status 127
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) config/udev: removing device AT Translated Set 2 keyboard
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) evdev: AT Translated Set 2 keyboard: Close
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) UnloadModule: "evdev"
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: releasing fd for 13:70
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) systemd-logind: failed to release device: Device not taken
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 44 paused 0
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) AT Translated Set 2 keyboard: always reports core events
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event6"
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) evdev: AT Translated Set 2 keyboard: Found keys
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input24/event6"
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "xkb_rules" "evdev"
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "xkb_model" "pc104"
    Apr 20 17:56:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (**) Option "xkb_layout" "us"
    Apr 20 17:56:20 gsc-arch google-chrome.desktop[3249]: [3249:3249:0420/175620:ERROR:CONSOLE(0)] "XMLHttpRequest cannot load http://net.tsinghua.edu.cn/new.php?url=query.yahooapis.com. No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'chrome-extension://mfgdmpfihlmdekaclngibpjhdebndhdj' is therefore not allowed access.", source: chrome-extension://mfgdmpfihlmdekaclngibpjhdebndhdj/newtab.html (0)
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 17:56:27 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 17:56:28 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:56:28 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:56:28 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:56:28 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 17:56:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.ControlCenter.SearchProvider'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Calculator.SearchProvider'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.clocks'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Documents'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Calculator.SearchProvider'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.clocks'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.ControlCenter.SearchProvider'
    Apr 20 17:57:05 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Documents'
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:58:16 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:58:26 gsc-arch gdm-password][28218]: gkr-pam: unlocked login keyring
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 17:58:26 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:58:29 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 17:58:36 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 17:58:37 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:04:56 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 18:04:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 18:05:03 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 18:05:04 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:05:04 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:05:04 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:05:04 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:05:04 gsc-arch polkitd[28465]: Registered Authentication Agent for unix-session:c1 (system bus name :1.15 [gnome-shell --mode=gdm --wayland --display-server], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale C)
    Apr 20 18:05:07 gsc-arch gdm-password][28475]: gkr-pam: unlocked login keyring
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 18:05:07 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Suspending AIGLX clients for VT switch
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:67
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:79
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:77
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:78
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:65
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:71
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:72
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 226:0
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:69
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:70
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:80
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:64
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got pause for 13:68
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:05:10 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:67
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:79
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:77
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:78
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:65
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:71
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:72
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 226:0
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) AIGLX: Resuming AIGLX clients after VT switch
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 1080), rotation normal, reflection none
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:69
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (EE) xf86OpenSerial: Cannot open device /dev/input/event16
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Permission denied.
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (WW) synaptics: AlpsPS/2 ALPS GlidePoint: cannot open input device
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: [dix] couldn't enable device 15
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:70
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:80
    Apr 20 18:05:12 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    Apr 20 18:05:13 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:64
    Apr 20 18:05:13 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: (II) systemd-logind: got resume for 13:68
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.ControlCenter.SearchProvider'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Calculator.SearchProvider'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.clocks'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Documents'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Calculator.SearchProvider'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.clocks'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.ControlCenter.SearchProvider'
    Apr 20 18:25:09 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Documents'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.ControlCenter.SearchProvider'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Calculator.SearchProvider'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.clocks'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Documents'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Calculator.SearchProvider'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.clocks'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.ControlCenter.SearchProvider'
    Apr 20 18:26:40 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Documents'
    Apr 20 18:26:59 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:26:59 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:27:25 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.Terminal'
    Apr 20 18:27:25 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.Terminal'
    Apr 20 18:29:31 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:31 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:33 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:33 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:33 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:41 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Activating service name='org.gnome.GConf'
    Apr 20 18:29:41 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Successfully activated service 'org.gnome.GConf'
    Apr 20 18:29:41 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:41 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:41 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:41 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-wayland-session[968]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Apr 20 18:29:49 gsc-arch /usr/lib/gdm/gdm-x-session[1195]: Reloaded configuration
    Last edited by xgdgsc (2015-04-20 10:33:44)

    BastardLawyerFromHell wrote:
    Got a similar weird issue - next to others. After waking up from suspend I've got a second Xorg-Session running on TTY2. This usually leads to a Xorg server crash.
    I'm not very satisfied with Gnome 3.16 these days.
    I reported a bug here: https://bugzilla.gnome.org/show_bug.cgi?id=748237

  • Weird Issues of late?!?!

    I have been having a lot of weird issues lately. A lot of programs are becoming unresponsive. It also seems that when one becomes unresponsive, others will follow. So if FCP becomes unresponsive, Safari does as well or Firefox or text edit, etc. In many cases, after I force-quit them, they will become unresponsive while re-launching, and I will end up closing everything and re-starting. Speaking of which, re-starting tends to get hung-up as well forcing me to hard reboot (hold down the power button).
    Also, it seems to be struggling to play movies, where that was never an issue before.
    Then, theres FCP. I am having issues where I a song used for a video will suddenly be all whacky. Towards the end it will start repeating like a skipping record, and make static noises. Replacing the song with itself clears that up. And finally, I have had a number of videos export from final cut with the audio disappearing halfway through, even though the timelines are fine; or an exported video will have 'freeze spots' where the video will just be one frame for a period of time.
    Anyone have an idea what might cause these issues??
    iMac 27" i7, 4GB Ram, 10.6.4, all video on external drives.

    frlane wrote:
    I have been having a lot of weird issues lately. A lot of programs are becoming unresponsive.
    If your problem is a process that's using excess CPU time, you can explore that with the Activity Monitor utility. Launch that, set the list near the top to "All Processes", then click the "CPU" column header near the top until the highest CPU users are at the top of the list. Now user your Mac until it's sluggish, then check the Activity Monitor display to see if you can spot a culprit.

  • Weird Issue : Difference in HTML/excel output and pdf/rtf output--Urgent

    Hi There,
    I am facing a weird issue. I created one rtf template. When I preview the o/p in rtf or pdf, everything comes up as expected. When I preview the same in html or excel, few rows come up as bold though they were not supposed to. What could be the problem ?
    This is extremly urgent as the users primarily use the excel or html as o/p.
    Thanks in advance.
    Regards,
    Saurabh

    Hi Brett,
    I am using Oracle XML Publisher standalone (not with oracle apps). The version is 10.1.3.2 . The issue comes up while previewing as well as when the report is run from the XMLP server.
    Regards,
    Saurabh

  • Having a weird issue with my assign after java embedding

    hi,
    I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
    com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
    i'm using soa 11.1.1.5
    Can anyone please help ?
    - Thanks
    Shirish

    Shirish,
    It's a bug and you will need to apply a patch for that.
    You can find all explanation in Oracle Support Id ID 1194228.1.
    Arik

  • RAM Preview issue

    Hi,
    I'm wondering if anyone has seen this or can provide some direction for further investigation. This is on a new Mac Pro on which I have just installed FCS
    In some projects the RAM preview has no effect on playback performance. After generating a RAM preview, the project will play at the same speed (say 2 fps) and as soon as I pause playing, the green progress bar that indicates project is loaded in RAM disappears or becomes fragmented - without modifying the project in any way. When this happens it also becomes nearly impossible to do additional editing as every simple task (as simple as resetting the play range) can result in the spinning beachball. There was a recent thread on RAM preview issues (http://discussions.apple.com/thread.jspa?messageID=12215113&#12215113) but it appears the problem there was due to a long HDV project. The projects I experience this on generally have a lot of particles or replicated elements, but are standard 720 x 486 resolution projects lasting less than 10 sec. System memory usage is relatively small, less than 4 GB.
    These issues arise on a recently purchased MacPro (3.33 GHz 6-Core, 16 GB RAM, ATI 5870). The boot disc is an OWC SSD, and user folders, scratch, etc are on separate hard drives. I installed the operating system on the SSD using the installation disc, and have manually installed all my programs from their original discs. (I initially used migration assistant to bring over applications, but that failed with some applications, so I wiped clean and started over). There have also been some past threads on how different hardware configurations can affect performance, but I don't seem to be doing anything abnormal here.
    What I have done:
    Tested ram using memtestosx
    Verified memory usage through activity monitor. The projects I have tested on use up less than 4 GB of system memory
    Before each test or comparison I reset preferences.
    I do not have this flakey behavior with an older MBP (17" 2.93 GHz Core 2 MBP with NVIDIA 9600) running the same OS (10.6.4) and motion version (4.0.3). Running the same project on the MBP will take longer for the RAM preview to complete, but when it does, the project plays at full frame rate.
    The upgrade to a MacPro was mainly for other CPU and RAM intensive applications unrelated to video or graphics, but I expected motion to show a nice performance boost over the MBP on this new machine. Anyhow, any insight or direction for further investigation that I should pursue will be appreciated.
    Thanks.

    I tried your project (nice, BTW), and yes, 20,000+ particles take some time to render. However, when I did a RAM Preview, I had no problems - after render it played at full speed.
    UNTIL...
    I selected the emitter. Then playback went to the pre-RAM-Preview speeds. As soon as I turned off overlays or made sure the emitter was not selected, the playback instantly sped back up to full speed. I believe this is because Motion needs to image the constantly changing outline of the emitter. This means it needs to be re-drawn every frame after Motion determines the extent/size of the 20,000 particles on their random journey.
    I think this is backed up by the fact that near the end of your project, there are only a few particles to keep track of and the playback appropriately speeds up. Also, CPU usage vastly increases when I turn on the overlays.
    Moral of the story? To ensure the quickest possible playback, turn off overlays (⌘/) or ensure that something like a particle emitter is not selected during playback.
    Patrick

  • Flex 4.5 weird issue

    Hi All,
    I have encountered a weird issue after I migrated my application from flex 3.5 to flex 4.5.
    In our application, we have 3 kind of views, View, ChartView and StackedView, the later extends the former one, let's say, in ChartView we have
    <local:View...>....</local:View>, in StackedView we start with <local:ChartView>. We config the view type in the database as View.swf, ChartView.swf and StackedView.swf. The problem here is for example, if I load a view with StackedView.swf and change to a view with ChartView.swf, some of the components will not initialized, we get runtime exception like
    ArgumentError: Error #2004: One of the parameters is invalid.
        at flash.display::Graphics/drawRect()
        at mx.controls::VRule/updateDisplayList()[E:\dev\4.5.1\frameworks\projec ts\mx\src\mx\controls\VRule.as:256]
        at mx.core::UIComponent/validateDisplayList()[E:\dev\4.5.1\frameworks\pr ojects\framework\src\mx\core\UIComponent.as:8989]
        at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.5.1\framewo rks\projects\framework\src\mx\managers\LayoutManager.as:736]
        at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.5.1\frame works\projects\framework\src\mx\managers\LayoutManager.as:801]
        at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.5 .1\frameworks\projects\framework\src\mx\managers\LayoutManager.as:1180 ]
    We debugged into the code, and found that the exception occoured before the parent component is initialized. Actually the parent(or the parent's parent) component's height or width is NaN.
    By the way, if we load ChartView.swf directly, everything works perfectly.
    And I just solved the problem by spliting the 3 type of views, say, keep the View.swf, comibine the code from View.swf with ChartView.swf to a new ChartView.swf, the same to StackedView.swf, which now combines 3 type of views' code.
    Though the problem is solved, but everyone can see it's not an elegent way, and the maintenence cost is high.
    I suspect it is something related to load module or unload module, seperating the 3 type of views just make sure they didn't share something.
    Can any expert help me figure this out? Many thanks.

    Use the profiler to see what is hanging onto the old memory.  But my main point is not about memory.  It is about sizes.  An empty container has no default size.  When it gets a child it often picks the child size, and then if that child is removed and another child is provided, instead of picking that new child’s size, it might still use the old child’s size, and that might cause the new child to layout at a different size than if it was the first child.

  • Weird issue with safari on iPad mini?

    I just had a weird issue with my safari web page, it stopped responding to my scrolling. I then tried coming out of it and going bad in again a couple of times, which still did not work. It then started jiggling around all over the place (jiggling is the only word I can use to describe it), it was as if you had clicked and held the page with a mouse and then started moving the page all over the place, or even like an earthquake on the page. The tab then closed. Can anyone explain this? Thanks.

    Quit Safari then reset your iPad.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Hi, We are running domino application in windows server 2008r2 machine, we are facing High RAM utilization issue, but there is no such process are running.

    Hi, We are running domino application in windows server 2008r2 standard virtual machine, we are facing High RAM utilization issue, but there is no such process are running. Machine is running in ESXI host, most of the time it shows high RAM utilization.
    We upgraded the ram from 6 to 8 GB, but still facing the issue,
    Where as other  VMs working fine.
    Need a help to find out the issue.

    Hi Sathish sampath,
    You can use Resource monitor and Task Manager->Performance to monitor the RAM memory utilization, I also recommend you to download the
    RAMMap to get more detailed memory information.
    For more detailed information to troubleshoot this issue, please also refer to this thread:
    memory performance problem. Please help.        
    You can also choose to post your monitor picture to help us to troubleshoot.
    I holp this helps.                       

  • Weird issue. Captivate 6 not letting me select a script for an Advanced Action

    Hi, So i'm facing this really weird issue on a captivate 6 project that i built. I need to add an Advance Action on a slide Exit action. This was previously set as "Continue" and now I want to set this to "Execute Advanced Action" (an Advanced Action script that I just wrote). The thing is that when I change the On Exit property to "Execute Advanced Actions", I am not able to select a script from the "Script" dropdown. I've tried everything from:
    changing machines and doing this on different computers with Captivate 6
    Making copies of the file and trying those
    Closing Captivate and Restarting my computer
    Ensuring that the slides are not locked
    but can't seem to figure this out. Also funnily, if I try to set the On Exit property of let's say slide 67 as "Execute Advanced Actions" (when it was previously just "Continue"), all other slides are also changing to this, meaning the On Exit property for all other slides has also been changed from "Continue" to "Execute Advanced Actions".
    I've been stuck with this for the last 6 hours and can't figue this out.
    Please Help!!!
    -Sean    

    If this is the same file you were having issues with before where we suspected corruption, then I'd have to say this probably confirms it.
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/recover-corrupt-project
    Usually the fix is to copy all slides into a new blank shell project of the same size to try and strip out the corruption issue.
    See item #4 here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    However, since you are on a Cp version earlier than 7.0.1, please note that this will also strip out all of your current advanced actions as well (which also might be where the corruption is anyway).
    Your issue is actually quite rare.  I cannot guarantee you that Cp 7 would never do the same thing, but one advantage of Cp7 is that you can try copying and pasting slides into a new shell project and it WILL bring along the advanced actions and variables as well.  So I definitely think it's worth downloading the trial version of Cp7, upgrading with the Cp 7.0.1 patch and giving it a go to see if that fixes your issue.
    Alternatively, if you haven't got lots of time-consuming Advanced Actions to recreate, just paste all slides into a new shell project and recreate them.  It's probably not going to take that long if it's only one project file.

  • RAM previewing issue

    Hi,
    I'm working in After Effects CS4, and I'm having a problem when I try to RAM preview short sections of an animation project. The RAM preview keeps stopping before it reaches the end of the work area, and beginning again. I'm pretty new to the program, but I've also noticed the little green bars that, I believe, tell you if the section has rendered/processed always have little gaps in them. That may be related. I don't know.
    Does anyone know what may be causing this RAM previewing issue?
    On a side note, I'm using After Effects on a Macbook (not a Macbook Pro), and I'm wondering whether this problem may be due to the Macbook not being sufficient for After Effects and CS4 in general. (I had originally intended to install the program on my 2004-era G5 tower, but it wouldn't install After Effects CS4 because apparently the program won't work with PowerPC processors, only Intel ones. At least that's what I was told.) Anyway, I've wondered whether the RAM previewing issue may be due to the Macbook not being enough computer for After Effects/CS4. My Macbook has a 2 GHz Intel Core 2 Duo, 2 GB 1067 MHz DDR3 and 106 GB of available space.
    Any insights on the RAM previewing issue and whether my Macbook isn't a suitable computer for these programs would be greatly appreciated.
    Thanks a lot,
    Neil

    From the theoretical specs there is nothing that speaks against your notebook. Apparently the biggest hurdle for some users is to get it to run in the first place, but now that it runs, it's safe to say that you will be able to use it properly. Of course, to let truth have its way, you will become slightly peeved at a point and get that yearning for a new machine, when you use more functions and your projects become more complex. Especially the only 2GB RAM will then often become a show stopper and you will really hate Adobe when one of those dreaded "Could not creat X x Y buffer" or similar out of memory warnings pop up. Still, no need to rush. Take your time and see, if AE is even everything you thought it would be and then make clear, structured plans for getting a new computer. You wouldn't wanna spend another 2000 bucks on a spiffy machine just to run AE once a month.
    Mylenium

  • Weird Issue With Windows Live Mail

    I have a friend using Windows Live Mail and he's been having some weird issues with it. When he goes to forward an email, it will occasionally open the email up twice, which isn't a huge deal it's just more annoying than anything. I thought maybe there was
    some malware or other junk that could be causing it so I ran MBAM and got everything cleaned up but it's still happening. Any other thoughts on what could cause this?
    Thanks.

    Windows Live Mail support is found @
    https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&ct=1410798892&rver=6.1.6206.0&wp=LBI&wreply=https:%2F%2Fanswers.microsoft.com%2Fen-us%2Fsite%2Fcompletesignin%3Fsilent%3DFalse&id=273572
    You must login to your Windows Live account and then Ask a Question.
    This forum is dedicated to the Windows 7 operating system.  Windows Live is not a feature of Windows 7 and Microsoft has established support for Windows Live Mail  @ the Microsoft Community found @
    http://answers.microsoft.com/en-us/windows/forum/windows_7-ecoms?auth=1
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Unusual FIX calculation - Weird Issue - Whats Wrong?

    Hi All,
    I'm facing a weird issue today, not sure if I'm missing on something:
    substitution variables defined:
    &RangeYears= "FY13":"FY16"
    &F1stYr= "FY13"
    Sample script:
    FIX("E1","P1", &RangeYears)
    <sample scripts here>
    FIX(&F1stYr)
    <calculate account A1 here>
    ENDFIX
    ENDFIX
    However when I refresh, I see account "A1" calculated for all years"FY13" to "FY16". However, the last Fix statement is for "FY13" only.
    Can someone explain this abnormality?

    Let's try something similar on Sample Basic
    FIX(@RELATIVE("Qtr1",0),"Sales","New York")
    "100-10"=100;
      FIX(Apr)
      Actual
      "100-10"=200;
      ENDFIX
    ENDFIX
    For first part of FIX
    Calculating [ Product(100-10)] with fixed members [Year(Jan, Feb, Mar); Measures(Sales); Market(New York)]
    For the second part since Apr is not part of it Essbase will include Apr together with Jab, Feb, Mar (First fix acts as a universal FIX)
    Calculating [ Scenario(Actual)] with fixed members [Year(Jan, Feb, Mar, Apr); Measures(Sales); Market(New York)]
    That is what is happening in your case.
    Regards
    Celvin
    http://www.orahyplabs.com

  • Firefox 4.0 sometimes won't let me go back? Weird issue..

    '''''Edit: I fixed this problem, look at the bottom of my original post for the fix.'''''
    Hello. This is my first time having to a post a problem here so I hope I'm in the right area.
    Ever since I updated my Firefox to 4.0 I've been having a rather weird issue. It seems when I'm visiting multiple websites and I click a link that takes me to another page, it won't allow me to go back. As in the, the back button on Firefox gets greyed out for whatever reason. This appears to be really random and it occurs on different websites sometimes, and other times it will be fine and allow me to go back. It's really bothering me A LOT, and I'm not sure what the hell could be causing such a problem.
    Perhaps someone can be of assistance on what I can do to remedy this situation if at all possible?
    Thanks
    '''Anyways like I said. I fixed the issue. It was the McAfee Site Adviser Plugin/Addon that was causing this issue. I uninstalled and deleted it and my problem was fixed. I'd recommend you all do the same if you have Site Adviser installed, otherwise it could be another plugin.'''

    I'm also having this issue. Doesn't seem like it's specific to any particular website. Just happens randomly. The Back button gets greyed out and it's really annoying! Do something guys!!!

  • Weird issue with Site Template in O365

    Hi,
    I ran into a weird issue while working with Site Template in O365 last night.
    I created a sub-site in a Site Collection with some Site Columns, CT and Lists. Then I saved it as a Site Template so that it can be used for different sites. Then I created 3 different sub-sites using the template. All went good.
    After some time when I looked at the sites, something really irritating happened. I saw the first two sites were missing all the site columns and CT. And the latest third site had 3 copies of each Site Column and CT.  Though for the first two sites,
    all the CT, Site Columns were available at List level, but it wad just the reference. The Actual CT was not seen the site settings.
    This is the first time I saw this kind of issue. Not sure what is the reason for this.
    Any idea around this ?
    Thanks,
    Nutan
    Nutan Sharma

    Hi,
    According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
    I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
    To solve this issue, I recommend to verify the things below:
    Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
    Test the same scenario with a new site to narrow the issue scope.
    I also recommend to check the event log and ULS log to see if anything unexpected occurred.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for

  • Aruutil (web-analysis users) under unix

    Hello, I created a xml document an want to set ARUImport.properties and adjust the ARUUtil.sh. <- all under Unix. We are using system 9.3. Can someone confirm that this process is working? Can someone post me examples of these two files so I can see

  • XPath API woes

    I'm trying to parse an XML document using the Actionscript 2 XPath API. In one place I am using this as my xpath: presentation/content[@contentName='wellness']/section[@sectionName='Nutrition/Weight']' It fails when I use a slash in the "sectionName"

  • Recent software update didn't remove some apps as promised

    The tag for the recent LG Revolution Verizon update was it would remove "Mobile IM, Rockband, Bitbop, Verizon Apps, Blockbuster, Rhapsody, VCAST Music, and Verizon Video" It didn't remove Blockbuster or Rhapsody.  In fact, Rhapsody is still running i

  • Some music not syncing to iPhone 6/iOS 8.0.2

    Hopefully someone can assist as i've exhausted all efforts to try and figure this out.  Ever since i switched over to my new 6, i can't get all of music to sync onto the device. The song and artwork appears on the device, but when i try to play, it j

  • How to transfer "folders" of photos from Ipad to PC?

    I am about to leave on a two week trip to France. I'm sure I will have many great photo ops and will shoot lots of pictures each day. I plan on downloading each day to my Ipad, so that I will have a folder "event" for each day of the trip. My only pr