Hyphenation not working

Hi guys,
I have hyphernation ON, but is not working. I see an strange sign from the original text, maybe is a non breaking word character imported from the original text in Word Office.
Here is the picture
http://www.pixentral.com/show.php?picture=1JKMDJnFsZmC56Jl93feGKN6qIJEhW1
By the way, here is a close up of this new symbol (i haven't seen it before)
http://www.pixentral.com/show.php?picture=1mnOd3tpi7T2zZndqXXJzOLzzfNJG
Is there any GREP command that will remove all forced non breaking text signs at once?
Thanks for any help.
Cheers,

Hi Peter, thanks for the fast reply.
I think the problem is a different one that i imagine. It seems when i put a rectange of quotation marks with Wrap Text action for some reason it with recognize or break the text properly.
Here is the sample.
http://www.pixentral.com/show.php?picture=11WPxSO7kp5IB7jiWK3Q35ybkOGVV1
If i remove the wrap text hyphernation is working again
http://www.pixentral.com/show.php?picture=17iDSVCcngJIcWDtngt5tociP50S
How can i have this quotation rectangle with white space around and hyphernation workign right at the same time?
Best,

Similar Messages

Hyphenation not working for Russian language

Hello All,
We really shocked to see that hyphenation not working for Russian language, anyone faced this issue? Please let us know how to rectify this issue since we need to complete one of the project with Russian language.
Thanks in advance.
Praveen

@Kasyan: Thanks for the response, I'm using 5.5 and facing this issue while select the language 'Russian' no where found the hyphens and in most of the places looks loose line due to missing of hyphens.
Could please confirm again?
Thanks,
Praveen

Discretionary hyphen not working

Any ideas, anyone?
CS3. I tried to put a discretionary hyphen in the word "viðskiptamanna-stólum".
It's there (you can see it) but it isn't working.
What's the trick or is this a bug in CS3? Is there a keyboard shortcut?

Thanks Mike.
I think it must be the Hyphen Limit that does it.
At least when I enter a figure there (it was set at zero) an ordinary hyphen breaks the word.
But is there a special character on the keyboard or in Glyphs for a discretionary hyphen? There used to be a keystroke in the old days but I can't find it any more.
I can't find Insert Special Character either, except via Find & Replace.
Changing languages is no good for Icelandic – the hyphenation is quite different from English and Scandiwegian and we also have special characters that other languages don't.

Hyphenation not working! have highlighted the text and have made sure language is set to english. any ideas?

I also cant force it to hyphenate. when I highlight the next and "check" hyphenation nothing happens. Please help! Thank you!
Mac // CS6

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

Web address with hyphen will not work in PDF

CS 4; ID 6.0.6
OSX 10.5.8
In ID, I create web links by selecting a url and then selecting New Hyperlink From URL. The new link is a Shared Destination by default with the web address as was selected. These links work fine when exported to PDF.
When I use the same process on a url with a hyphen (part of the address and not a line break), the resulting Shared link will not work when exported to PDF. The newly created link in this case always begins with file:///Users/.
What is it about the hypen that messes up the process? I work in a bilingual government so we have a lot of urls with hyphens in them. For example: www.cga-nb.org.
Thanks.

SWSinNC wrote:
I will, thanks
so your saying that if it's fake...that specific function is a common flaw ?
Exactly!
Unfortunately the full thread recounting this saga got lost in the forum changeover, but the fake copies come in authentic looking shrink-wrapped boxes with printed documentation; and everything works except the nudge.
Or sometimes other keyboard combinations.

Keyboard shortcut not working - nonbreaking hyphen - help

Does anyone know how to fix this problem?
I can't get the keyboard shortcut for nonbreaking hyphen to work. I can get the nonbreaking hyphen to insert if I insert it via the type menu but menus are such time wasters. I have even tried to make a new and different keyboard shortcut for nonbreaking hyphen and it will still not work. Any ideas of what needs to be corrected/purged/smashed with a hammer to get this to work?
Thanks in advance for any help
Running InDesign CS3 5.0.2 on a PowerMac 2x2.66Ghz dual Core Intel Xenon, OS X 10.5.2, 2gigs ram 667 Mhz, and it sits on a crumby looking desk but I don't think the desk is the problem. ;)

Sigh. I figured out the problem. But thank you M Blackburn. Your response got me thinking about other shortcuts. Sure enough it was Universal Access that was causing the conflict. I must have hit command-option-8 at some point to turn on Zoom in Universal Access which then uses command-option-dash for the zoom out feature. Since I am already zoomed out nothing happened when I tried that key combination. Once I turned off that Zoom feature my keyboard shortcut in InDesign worked again.
Phew.
Thank you

Hyphenation and spell check not working

Hi there
I'm having some issues going from CS4 - CS6, namely some functions that I struggling to get my head around.
My main issue however, is that I cannot get hyphenation or spell check to work. I have my language set to English: UK, however every word is underlined in red. Placeholder text defaults to Hebrew, I can solve that by holding down the cmd key but I wonder if this is part of the problem?
Hypenation is also not working at all.
I have tried my settings on Hunspell, Proximity and User Dictionary, but I can't seem to get it to work.
Any thoughts?
Thanks

Language is a character-level attribute and is not related, at least not directly, to the choice of dictionary in the prefs. The dictionary choice simply tells ID which of the installed dictionaries it should use for checking spelling and hyphenation when it encounters that particular language, but does nothing to set a language anywhere.
Clearly your default language is set to Hebrew. To fix that you need to change the language with nothing selected. If you do this in an existing file, it will affect all new text in that file, but not existing text or other files. If you change the default language with no files open it will be set for all new files, but will not affect anything already existing. To change the language, just pick the correct one from the dropdown in the Character panel or Control panel.
To fix existing text it's probably easiest to use Find/Change and search for the incorrect language in the find formatting and change to the correct language in the change formatting. You'll find the language dropdowns under Advanced Character Formatting in those dialogs. You can use either a GREP or plain text query, and you can leave the find and change fields themselves blank as long as you've included something in both of the formatting areas.

Hyphen search in Adobe XI (11) not working as it used to in Adobe 10

Yet to see a reply to this or googled a search outside Adobe
a search for geo‐political in AR11 does not work if you use a keyboard dash - this has happened with several pdf documents - it always worked with AR10
It WILL work if you copy and paste `geo-political' into a search box
Pasting geo-political into Wordpad gives `geo ‐ political' and I paste into another program I use I get `geo
Obviously there is some strange coding that AR11 is using - IS there a solution to searching for terms with dashes (other than pasting in the dash each time from the pdf
Thanks

Also, what is your Reader XI version?
P.S. to share a file: https://forums.adobe.com/thread/1408375

Filter does not work with *.jsp URL pattern???

Hi All,
I am, by no means, very good at JSF or Java. I have looked at various forum posts on here for ways to implement a security filter to intercept requests to pages that first require one to be logged in, and if not, redirect them to the login page. Yes, I know a lot of you have heard this many times before, and I'm sorry to bring it up again.
BUT, from the guidance of other posts, I have got a filter that works fine when the url pattern is set to "/faces/*" or "/<anything>/*", however it won't work for "*.jsp" or "*.<anything>"
My filter is as follows:
package test.security;
import javax.faces.context.FacesContext;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
    /** Creates a new instance of SecurityFilter */
    private final static String FILTER_APPLIED = "_security_filter_applied";
    public SecurityFilter() {
    public void init(FilterConfig filterConfig) {
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
        HttpServletRequest req = (HttpServletRequest)request;
        HttpServletResponse res = (HttpServletResponse)response;
        HttpSession session = req.getSession();
        String requestedPage = req.getPathTranslated();
        String user=null;
        if(request.getAttribute(FILTER_APPLIED) == null) {
            //check if the page requested is the login page or register page
            if((!requestedPage.endsWith("Page1.jsp")) /* This is the login page */
                //set the FILTER_APPLIED attribute to true
                request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
                //Check that the session bean is not null and get the session bean property username.
                if(((test.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
                    user = ((test.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
                if((user==null)||(user.equals(""))) {
                   // try {
                 //       FacesContext.getCurrentInstance().getExternalContext().redirect("Page1.jsp");
                  // } catch (ServletException ex) {
                  //      log("Error Description", ex);
                    res.sendRedirect("../Page1.jsp");
                    return;
        //deliver request to next filter
        chain.doFilter(request, response);
    public void destroy(){
}My web.xml declaration for the filter is:
<filter>
<description>Filter to check whether user is logged in.</description>
<filter-name>SecurityFilter</filter-name>
<filter-class>test.security</filter-class>
</filter>
<filter-mapping>
<filter-name>SecurityFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
Note: I have also tried this with <url-pattern>*.jsp</url-pattern> for the filter mapping in place of the Faces Servlet
My web.xml declaration for the url pattern is:
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>Which JSC/NetbeansVWP automatically creates a "JSCreator_index.jsp" which has:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:forward page="Page1.jsp"/>
</jsp:root>When run, this causes an Error 500 in the browser and a NullPointerException in SecurityFilter.java on the line:
if((!requestedPage.endsWith("Page1.jsp")) /* This is the login page */I think I'm missing something that would be obvious to anyone who knows better than me. Any ideas?

Dear Ginger and Boris,
thanks for the information - the problem seems to ocur in EP7 as well, Boris told me it is fixed in SP15. We are on SP14 now, so there is hope !
actually the information in the oss note stated above is also true, as we have an Oracle DB. On a similar demo system (only difference is SQL DB) the hyphen search works !
best regards, thank you !
Johannes

Wireless not working on boot

I have an older PC (so it's not moving much...), and I'm trying to set up wireless connection trough a USB wireless adapter (Ralink Technology, Corp. RT2501USB Wireless Adapter).
I have the correct drivers installed, and everything set up (doulbe checked of course).
The wireless setup during boot-time does not works, and prints the error message
Could not associate $1 - try increasing WIRELESS_TIMEOUT and check network is WEP or has no security
If I run iwgetid immeadiateley after login, I get the following output:
$ iwgetid wlan0 -ra
00:00:00:00:00:00
On the other hand, if I try a
sudo /etc/rc.d/network start
after I log in, it works flawlessley.
I've tried the following:
--> setting WIRELESS_TIMEOUT to 10 seconds, does not works (only after boot)
--> double checking the setup lines
--> reading the /etc/rc.d/network script, and executing the commands manually, it works
$ sudo /etc/rc.d/network stop
$ sudo iwconfig wlan0 essid BodorWLAN key s:wikey
$ sudo iwgetid wlan0 -ra
[the MAC-ADDRESS of wlan0, differring from 00:00:00:00:00:00]
--> stopping and starting the /etc/rc.d/network script, it works
--> editing /etc/rc.d/network to print out the used varialbes and more verbose error messages (I've restored it since then, so I cannot post the results, all seemed to be ok.)
/etc/config.d/wireless:
# Settings for wireless cards
# For each wireless interface declared in INTERFACES (in rc.conf), declare
# a wlan_${IF} variable that contains the arguments to be passed to
# iwconfig(8). Then list the original interface name in the
# WLAN_INTERFACES array.
#wlan_eth0="eth0 mode managed essid default"
#WLAN_INTERFACES=(eth0)
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="hu_HU.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Budapest"
KEYMAP="hu"
CONSOLEFONT="lat2-16.psfu.gz"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="curly-desktop"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
wlan0="dhcp"
wlan_wlan0="wlan0 essid BodorWLAN key s:wikey"
INTERFACES=(eth0 wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng dbus hal network openntpd netfs crond alsa)
Note: I modified sensitive information (passwd, stb.)
I'm running out of ideas, since the network script appears to be working always except at boot time.
Last edited by dragonfi (2010-06-11 15:44:52)

Activating the usb hooks in the ramdisk did not done the job, as the network demon only runs late in boottime (maybe I'm just being imprecise, i'm meaning the part, where it already entered the final runlevel).
On the other hand, I did tracked down the problem, and I beliveve it's some kind of desing-flaw in the wireless USB utility. (Or I'm just not aware of a certain feature in it.)
I modified /etc/rc.d/network to resend the iwconfig to the device after the 2 second sleep, and it seems to work sometimes.
/etc/rc.d/network: (added lines in wi_up())
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
# wireless settings
[ -f /etc/conf.d/wireless ] && . /etc/conf.d/wireless
# ethernet bonding settings
[ -f /etc/conf.d/bonding ] && . /etc/conf.d/bonding
# bridge settings
[ -f /etc/conf.d/bridges ] && . /etc/conf.d/bridges
# dhcpcd settings
[ -f /etc/conf.d/dhcpcd ] && . /etc/conf.d/dhcpcd
ifup()
if [ "$1" = "" ]; then
echo "usage: $0 ifup <interface_name>"
return 1
fi
eval ifcfg="\$${1}"
# Get the name of the interface from the first token in the string
if [ "$ifcfg" = "dhcp" ]; then
ifname="$1"
else
ifname=${ifcfg%% *}
fi
/sbin/ifconfig $ifname up
wi_up $1 || return 1
if [ "$ifcfg" = "dhcp" ]; then
# remove the .pid file if it exists
/bin/rm -f /var/run/dhcpcd-${1}.pid >/dev/null 2>&1
/bin/rm -f /var/run/dhcpcd-${1}.cache >/dev/null 2>&1
/sbin/dhcpcd $DHCPCD_ARGS ${1}
else
/sbin/ifconfig $ifcfg
fi
return $?
wi_up()
eval iwcfg="\$wlan_${1}"
[ "$iwcfg" = "" ] && return 0
/usr/sbin/iwconfig $iwcfg
[[ -z "$WIRELESS_TIMEOUT" ]] && WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
#added line below because wlan0 does not play nice..
/usr/sbin/iwconfig $iwcfg
bssid=`iwgetid $1 -ra`
if [[ "$bssid" = "00:00:00:00:00:00" ]]; then
printhl "Could not associate $1 - try increasing WIRELESS_TIMEOUT and check network is WEP or has no security"
return 1
fi
return 0
ifdown()
if [ "$1" = "" ]; then
echo "usage: $0 ifdown <interface_name>"
return 1
fi
eval ifcfg="\$${1}"
if [ "$ifcfg" = "dhcp" ]; then
if [ -f /var/run/dhcpcd-${1}.pid ]; then
/bin/kill $(cat /var/run/dhcpcd-${1}.pid)
fi
fi
# Always bring the interface itself down
/sbin/ifconfig ${1} down >/dev/null 2>&1
return $?
iflist()
for ifline in ${INTERFACES[@]}; do
if [ "$ifline" = "${ifline#!}" ]; then
printf " $ifline:\t"
else
printf "$ifline:\t"
fi
eval real_ifline=\$${ifline#!}
echo $real_ifline
done
rtup()
if [ "$1" = "" ]; then
echo "usage: $0 rtup <route_name>"
return 1
fi
eval routecfg="\$${1}"
if grep -q :: <<< $routecfg; then
/sbin/route -A inet6 add $routecfg
else
/sbin/route add $routecfg
fi
return $?
rtdown()
if [ "$1" = "" ]; then
echo "usage: $0 rtdown <route_name>"
return 1
fi
eval routecfg="\$${1}"
if grep -q :: <<< $routecfg; then
/sbin/route -A inet6 del $routecfg
else
/sbin/route del $routecfg
fi
return $?
rtlist()
for rtline in ${ROUTES[@]}; do
if [ "$rtline" = "${rtline#!}" ]; then
printf " $rtline:\t"
else
printf "$rtline:\t"
fi
eval real_rtline=\$${rtline#!}
echo $real_rtline
done
bond_up()
for ifline in ${BOND_INTERFACES[@]}; do
if [ "$ifline" = "${ifline#!}" ]; then
eval bondcfg="\$bond_${ifline}"
if [ -n "${bondcfg}" ]; then
/sbin/ifenslave $ifline $bondcfg || error=1
fi
fi
done
bond_down()
for ifline in ${BOND_INTERFACES[@]}; do
if [ "$ifline" = "${ifline#!}" ]; then
eval bondcfg="\$bond_${ifline}"
/sbin/ifenslave -d $ifline $bondcfg || error=1
fi
done
bridge_up()
for br in ${BRIDGE_INTERFACES[@]}; do
if [ "$br" = "${br#!}" ]; then
# if the bridge already exists, remove it
if [ "$(/sbin/ifconfig $br 2>/dev/null)" ]; then
/sbin/ifconfig $br down
/usr/sbin/brctl delbr $br
fi
/usr/sbin/brctl addbr $br
eval brifs="\$bridge_${br}"
for brif in $brifs; do
if [ "$brif" = "${brif#!}" ]; then
for ifline in ${BOND_INTERFACES[@]}; do
if [ "$brif" = "$ifline" ] && [ "$ifline" = "${ifline#!}" ]; then
ifup $ifline
eval bondcfg="\$bond_${ifline}"
/sbin/ifenslave $ifline $bondcfg || error=1
unset bond_${ifline}
fi
done
/usr/sbin/brctl addif $br $brif || error=1
fi
done
fi
done
bridge_down()
for br in ${BRIDGE_INTERFACES[@]}; do
if [ "$br" = "${br#!}" ]; then
/usr/sbin/brctl delbr $br
fi
done
case "$1" in
start)
if ! ck_daemon network; then
echo "Network is already running. Try 'network restart'"
exit
fi
stat_busy "Starting Network"
error=0
# bring up bridge interfaces
bridge_up
# bring up ethernet interfaces
for ifline in ${INTERFACES[@]}; do
if [ "$ifline" = "${ifline#!}" ]; then
ifup $ifline || error=1
fi
done
# bring up bond interfaces
bond_up
# bring up routes
for rtline in "${ROUTES[@]}"; do
if [ "$rtline" = "${rtline#!}" ]; then
rtup $rtline || error=1
fi
done
if [ $error -eq 0 ]; then
add_daemon network
stat_done
else
stat_fail
fi
stop)
#if ck_daemon network; then
# echo "Network is not running. Try 'network start'"
# exit
#fi
stat_busy "Stopping Network"
rm_daemon network
error=0
for rtline in "${ROUTES[@]}"; do
if [ "$rtline" = "${rtline#!}" ]; then
rtdown $rtline || error=1
fi
done
# bring down bond interfaces
bond_down
for ifline in ${INTERFACES[@]}; do
if [ "$ifline" = "${ifline#!}" ]; then
ifdown $ifline || error=1
fi
done
# bring down bridge interfaces
bridge_down
if [ $error -eq 0 ]; then
stat_done
else
stat_fail
fi
restart)
$0 stop
/bin/sleep 2
$0 start
ifup|ifdown|iflist|rtup|rtdown|rtlist)
$1 $2
echo "usage: $0 {start|stop|restart}"
echo " $0 {ifup|ifdown|iflist|rtup|rtdown|rtlist}"
esac
# vim: set ts=2 noet:
I wrote a sript and chnaged network to this script in my rc.conf, it appears to be working now.
/etc/rc.d/myscript:
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
ifup()
/sbin/ifconfig wlan0 up
/usr/sbin/iwconfig wlan0 essid BodorWLAN key s:admin
sleep 2
/usr/sbin/iwconfig wlan0 essid BodorWLAN key s:admin
dhcpcd wlan0
return $?
ifdown()
if [ -f /var/run/dhcpcd-wlan0.pid ]; then
/bin/kill $(cat /var/run/dhcpcd-wlan0.pid)
fi
/sbin/ifconfig wlan0 down >/dev/null 2>&1
return $?
case "$1" in
start)
stat_busy "Starting Network"
ifup
stat_done
restart)
stat_busy "Restarting Network"
ifdown
ifup
stat_done
stop)
stat_busy "Stopping Network"
ifdown
stat_done
echo "usage: $0 {start|stop|restart}"
esac
My only question now is that how could I achieve the same solution in a more elegant way, I'm a bit confused, because the above script does the exact same stuff that my modified /etc/rc.d/network would supposed to be doing.
Last edited by dragonfi (2010-06-12 19:27:38)

System update 4.0 not working from day one

Can anyone help me with "An error occurred while gathering user information".
TVSU was not working with factory installed version and it is not working with the newest version, always with the same error. I had a random shutdown & melted speaker problem with my T400s so resolving this issue was not my priority, now it is
I have Windows 7 and TVSU 4.0.0024
Thanks

Hi,
Check the following registry keys (or similar)
HKLM\HARDWARE\ACPI\DSDT\LENOVO\
HKLM\HARDWARE\ACPI\FADT\LENOVO\
HKLM\HARDWARE\ACPI\RSDT\LENOVO\
They should be in the form of your model number without the hyphen and not TP-xx___
An example would be: 8919Y16
Also check following registy key:
HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\System Update\Preferences\UCSettings\RunTime\MTM
if it's showing your correct MTM number and under it also the NLSOS and the rest.
Let me know if these reg keys are fine on your system
<maybe a short reg export would be fine>
Cheers

[solved] LibreOffice spellchecker does not work, version 3.4.2

It's kind of a stupid question, but I do not know how I can debug this. The spell checker exits immediately after "Tools/Spelling and Grammar…" though there are incorrect words, "AutoSpellCheck" also underlines nothing. I set language in the status bar to "English", "Russian", "Ukrainian" — none worked. I have "Russian Dictionaries 0.6" and "Ukrainian spelling dictionary and thesaurus 1.6.0" in "Tools/Extension Manager…" (no English dictionary, strange). I have these packages installed:
$ pacman -Q | grep -E "libreoffice|hunspell|mythes|hyphen"
hunspell 1.2.15-1
hunspell-en 7.1-1
hunspell-ru 0.99g5-4
hunspell-uk 1.6.1-1
hyphen 2.7.1-2
hyphen-en 2.7.1-2
hyphen-ru 0.1-2
hyphen-uk 0.1-1
libmythes 1.2.1-1
libreoffice-calc 3.4.2-2
libreoffice-common 3.4.2-2
libreoffice-en-GB 3.4.2-1
libreoffice-extension-ct2n 3.4.2-2
libreoffice-extension-diagram 3.4.2-2
libreoffice-extension-google-docs 3.4.2-2
libreoffice-extension-hunart 3.4.2-2
libreoffice-extension-nlpsolver 3.4.2-2
libreoffice-extension-numbertext 3.4.2-2
libreoffice-extension-oooblogger 3.4.2-2
libreoffice-extension-pdfimport 3.4.2-2
libreoffice-extension-presentation-minimizer 3.4.2-2
libreoffice-extension-presenter-screen 3.4.2-2
libreoffice-extension-report-builder 3.4.2-2
libreoffice-extension-scripting-beanshell 3.4.2-2
libreoffice-extension-scripting-javascript 3.4.2-2
libreoffice-extension-scripting-python 3.4.2-2
libreoffice-extension-typo 3.4.2-2
libreoffice-extension-validator 3.4.2-2
libreoffice-extension-watch-window 3.4.2-2
libreoffice-extension-wiki-publisher 3.4.2-2
libreoffice-gnome 3.4.2-2
libreoffice-writer 3.4.2-2
mythes-en 20060306-1
mythes-ru 0.1-2
mythes-uk 0.1-2
I thought that I missed some package due to splitting, then I installed "libreoffice-extensions". I also tried to downgrade to "libreoffice-3.4.1-1" (non-split) (I have no older packages).
Last edited by beroal (2011-08-20 18:34:32)

Baryon wrote:The only way I could get spellchecking to work was by manually installing a dictionary extension from the OpenOffice extensions site
Thanks for your reply, but this does not work either.
I noticed that "Tools/Options/Language Settings/Writing Aids/Available Language Modules" is empty, i.e. libreoffice does not see hunspell.
$ ls /usr/lib/libreoffice/basis3.4/program | grep -E "lnth|hyphen|spell"
libhyphenlx.so
liblnthlx.so
libspelllx.so
$ ls -d /usr/lib/*spell*
/usr/lib/aspell /usr/lib/libaspell.so.15 /usr/lib/libgtkspell.so    /usr/lib/libhunspell-1.2.so /usr/lib/libpspell.so
/usr/lib/aspell-0.60 /usr/lib/libaspell.so.15.1.5 /usr/lib/libgtkspell.so.0    /usr/lib/libhunspell-1.2.so.0 /usr/lib/libpspell.so.15
/usr/lib/libaspell.so /usr/lib/libgtkspell.a    /usr/lib/libgtkspell.so.0.0.0 /usr/lib/libhunspell-1.2.so.0.0.0 /usr/lib/libpspell.so.15.1.5
$ pacman -Q libreoffice-common
libreoffice-common 3.4.2-2
$ pacman -Q libreoffice-writer
libreoffice-writer 3.4.2-2
$ pacman -Q hunspell
hunspell 1.2.15-1
I deleted ~/.config/.libreoffice .
Last edited by beroal (2011-08-20 17:58:01)

Page Number does not work in @section

Hi -
Can someone please help me?
I have an rtf template and I want to show the number of pages. I used the syntax - <?fo:page-number?> but it's not working because my page number is always 1 even if my pages is more than 1. Could it be because I'm using the @section on my for-each?
Thank you,

Entering shift+hyphen to get the underscore character in the dot leader definition works in all versions from 6.0 on upward (tested).
(Note: the vertical bar is the flashing cursor)

Mail applescript not working

I'm writing a script using the Mail applescript template (File > New from template > Mail > Mail Rule Action.scptd) but it doesnt seem like the examples in the template are working
using terms from application "Mail"
          on perform mail action with messages these_messages for rule this_rule
                    tell application "Mail"
                              set the message_count to the count of these_messages
                              repeat with i from 1 to the message_count
                                        set this_message to item i of these_messages
                                        try
                                                  set this_subject to (subject of this_message) as Unicode text
                                                  if this_subject is "" then error
                                        on error
                                                  set this_subject to "NO SUBJECT"
                                        end try
                                say this_subject
                              end repeat
                    end tell
          end perform mail action with messages
end using terms from
It says "no subject" even if the message has a subject. I'm using OS X 10.7.2 and Mail 5.1. Any suggestions?

Pierre,
Are you using os 10.7.2? The reason I ask is that my code does not have the word unicode in it and it still does not work. Works fine when I select apply rules from the menu. Does not work when mail processes rules as the email is first received.
using terms from application "Mail"
          on perform mail action with messages theMessages for rule theRule
                    try
                              tell application "Mail"
                                        set theText to "Still not working!"
                                        repeat with eachMessage in theMessages
                                                  set theSubject to subject of eachMessage
                                                  set theBody to "Voice message --> " & return
                                                  set messagePhone to rich text ((offset of "(" in theSubject) + 1) thru ((offset of ")" in theSubject) - 1) of theSubject
                                                  tell application "Address Book"
                                                            set myList to every person
                                                            repeat with i from 1 to number of items in myList
                                                                      set thePerson to item i of myList
                                                                      tell thePerson
                                                                                set phoneList to every phone
                                                                                repeat with i from 1 to number of items in phoneList
                                                                                          set this_item to item i of phoneList
                                                                                          tell this_item
                                                                                                    set thisPhone to value as string
                                                                                                    ignoring hyphens and punctuation
                                                                                                              if thisPhone is equal to messagePhone then
                                                                                                                        set theSubject to "Voice Message From " & name of thePerson & " " & thisPhone
                                                                                                                        set theBody to theBody & return & name of thePerson & " --> " & organization of thePerson
                                                                                                              end if
                                                                                                    end ignoring
                                                                                          end tell
                                                                                end repeat
                                                                      end tell
                                                            end repeat
                                                  end tell
                                                  try
                                                            set theAttachments to every mail attachment of eachMessage
                                                            set theAttachment to item 1 of theAttachments
                                                            set thisFilePath to "/Users/Tom/Downloads/" & theSubject & ".wav"
save mail attachment 1 of eachMessage in thisFilePath
                                                            set theFile to POSIX file thisFilePath as string
                                                            set theMessage to make new outgoing message with properties {subject:theSubject, content:theBody}
                                                            tell theMessage
                                                                      make new recipient at end of to recipients with properties {name:"Tom Moore", address:"[email protected]"}
                                                                      tell content of theMessage
make new attachment with properties {file name:thisFilePath} at after first paragraph
                                                                      end tell
                                                                      send
                                                            end tell
                                                            tell application "Finder"
                                                                      delete theFile
                                                            end tell
                                                            set theText to ""
                                                  end try
                                        end repeat
                                        if theText is not equal to "" then
display dialog theText buttons {"OK"} default button 1
                                        end if
                              end tell
                    on error
display dialog theText buttons {"OK"} default button 1
                              beep 2
                    end try
          end perform mail action with messages
end using terms from

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Hyphenation not working

Similar Messages

Maybe you are looking for