Hypothetical question about power adaptors

I'm thinking about getting a Internet TV, the TV in question isnt wireless so was wondering whether its possible to have 1 powerline adapter into the hub, the other from the Vision box as normal but then buy another adaptor to plug in the TV? Would this be feasible or cause interference/slow the speed down etc?
Cheers

captwynters wrote:
it wouldnt work, it'd be like splitting one ethernet cable and using it in two devices, its a great idea powerline adapters but very limited.
Isn't that what routers/switches are designed to do though? 
The limit as always though is the overall throughput design of the powerline adaptors or ethernet devices.
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Similar Messages

  • General question about Power BI

    Hi there,
    Newbies on Power BI, i wonder if it is THE solution for my need.
    I have a database on MYSQL from which i need to create charts ( bar chart, pie and so one).
    But, i need those data in real time, dynamics way.
    And i need to show those dynamics charts on an HTML page.
    So is Power BI with Sharepoint is the best solution for that case?
    Thanks in advance.
    Regards

    Manu,
    Power BI on Office 365?
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Question about "Power On Start Test"

    Hi... I have owned TWO MacBook Pro's, one built back in 2006 and a newer one built in 2009 (both 17 inch)... On either one of them, on say about every 20th or so "pressing of the power key" to start the machine, rather than hearing the mac startup chime and see the screen light up within a few seconds, instead there is no chime and the screen stays black for a long time, maybe up to 30 seconds... Then the chime sounds and the screen comes to life.
    If it's quiet in the room when this event (or non-event) happens I can usually hear the quiet sounds you hear when the machine is starting, a bit of clicking and perhaps the sound of the hard drive starting up (??, never been sure what those sounds are other than to say they are "normal"). But you don't hear the chime and nor does the screen light up until some time significantly later...
    It's been my belief though not my knowledge that when this happens, again maybe one in every 20 or so starts, that it is the Power on Start Test that is, for some reason, not completing quickly but instead taking some time for whatever reason... If I'm patient, eventually, like in maybe up to 30 seconds, I then hear the chime and away it goes...
    Again, this occurs on not one but two different MacBook Pro's and it's done it on both of them at what I would guess would be this same 5% rate since both were new... And over all versions of operating systems that those two machines have seen... So it does NOT appear to be anything tied to something faulty in the individual computer unless I just go so unlucky as to buy two machines 3 years apart that both came with the same problem (unlikely)... I also have an older G4 desktop at home and I have a G5 desktop at work... I've never noticed this on either of those machines so this would perhaps appear to be laptop related????
    But as I peruse around and look for other folks who describe such an issue, I don't find much... So, I decided to post this question...
    Can anyone offer insight into what might be going on??? Is it a problem??? Might it be hardware, software, what??? Any feedback would be much appreciated...
    thanks... bob..

    try a power manager reset.
    read this apple doc:
    http://support.apple.com/kb/HT3964

  • Question about power surges and stuff like that.

    Ok so I have a question so… Today i was at home and i had a lot of stuff on by on i want to say that i had a lot of electronics using power and my fuze went off buy went off i mean it like shut off some of the electronics and my iMac was in Sleep mode and i was wondering if any damage was inflicted to my iMac everything is running good on it right now I'm using it but i just want to be shire I'm not an expert by any means.
    Thanks for your time.
    And also Happy Holidays

    If that, or other power problems, happen very often, consider geting a U.P.S. (Uninterruptible Power Supply, aka Battery Backup) for your Mac.  You can now get ones that will run your Mac for several minutes for $80 or so.
    See  Using a U.P.S. System with a Mac.

  • MSI X79A-GD45 8D overclocking 3930k question about Power Saving Features

    hi guys
    i could do the oc for my 3930k.Now i am on 4.3ghz.Here are the settings i made ;
    i didnt change the cpu multiplier left it on auto.
    EIST and Turbo features are on.I just change the multpliers of the core limits for every core.I made core limit 43 for all cores.
    Also i set the vcore offset feature to %12.5 and it made the voltage under load 1.280 which can hold system stable @ 4.3ghz.
    when cpu is idle multiplier and voltage decreasing and when the cpu is under load voltages and multipliers increase.
    thats what i want.  But;
    i tested the vcore offset as %100 the auto voltage under load increases to max 1.344.If i go for 4.8ghz probably i would need more than 1.344 on this situation what will happen?because i will need more than 1.344 but the auto voltage will give me just 1.344.How can we arrange this?
    then i tried to enter voltage manually but the voltage didnt decrease even all the power saving features on.I haven't change any settings  i mentioned above for the 4.3ghz oc.I just changed the vcore voltage to manuel. Everything stayed the same like decreasing multiplier under idle and increasing multipliers under load except the voltage.It stayed the same as i gave in the bios.
    from here
    I read from somewhere that on msi boards if you put the cpu multipler manually you loose power saving features.Everytime under load or idle cpu will be stay at the same ghz.Is that true?
    if i give the cpu multiplier manuel or vcore voltage can i benefit from the power saving features like  decreasing voltages and multiplier under idle and  and incresing them under load ?
    or when i enter the cpu multiplier and voltage manually ,does the power saving features go away?

    Quote from: Froggy Gremlin on 29-November-12, 19:15:02
    VDroop set to 100% is all you are going to get. 1.344v's should get you about 44-46X on the cores on 'Auto'. The voltage goes down from there with the lower VDroop settings. With CPU V. set to 'Auto', you get power saving, soon as the CPU V. is taken out of 'Auto', you lose it. No, the CPU speed may lower, but the voltage going to it will not.
    VDroop is not a true offset feature like can be found on other brands of boards. https://forum-en.msi.com/index.php?topic=162779.0
    Most folks around the industry recognize 1.350v's as the recommended limit for socket 2011 CPU's, so 1.344v's is fairly close to that anyway.
    So when i set the voltage and the cpu multiplier i loose power saving features right?
    Thanks for the reply

  • MOVED: MSI X79A-GD45 8D overclocking 3930k question about Power Saving Features

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=163826.0

    Quote from: Froggy Gremlin on 29-November-12, 19:15:02
    VDroop set to 100% is all you are going to get. 1.344v's should get you about 44-46X on the cores on 'Auto'. The voltage goes down from there with the lower VDroop settings. With CPU V. set to 'Auto', you get power saving, soon as the CPU V. is taken out of 'Auto', you lose it. No, the CPU speed may lower, but the voltage going to it will not.
    VDroop is not a true offset feature like can be found on other brands of boards. https://forum-en.msi.com/index.php?topic=162779.0
    Most folks around the industry recognize 1.350v's as the recommended limit for socket 2011 CPU's, so 1.344v's is fairly close to that anyway.
    So when i set the voltage and the cpu multiplier i loose power saving features right?
    Thanks for the reply

  • Tecra 8000: Question about AC adaptor

    In bad englisch sorry.
    The power suply of my tecra 8000 isn't working it's not the wire but the reciever? in the notebook. I have a new notebook but there are some files inside the tecra and because I don't have power I can't reach it. Does anyone nows a solution that doesn't cost me a lot of money?
    greetings H

    If a new charger doesn't fix this problem, another solution would be to use a Tecra 520 docking station if you can find one cheaply. This also supports the Tecra 8000 (but not Tecra 8100, 8200). This will power the laptop via connections on the underside of the unit and so avoid the broken DC socket.
    Of course you wouldn't be able to use the laptop as a portable, but it would at least provide a solution to enable you to retrieve valuable data.
    Another thought: If the data is important to you, you could remove the hard drive and insert it in to the caddy of another (working) Tecra 8000 laptop.

  • Quick question about power adapter

    Is it okay to leave the power adapter on for a long period of time? would it mess with the battery if its on power adapter for long? or once the battery is charged does the computer use the adapter or battery(which keeps charging)?
    Its just that i want to leave my macbook on all night...waiting for an important email.
    Thanks

    It's not a problem. It won't affect your battery at all. I leave mine plugged in all the time using it for hours at a time sometimes. You'll be ok.
    Hope the email comes so you can get some sleep!

  • Question about Power adapter (sorry if this is in wrong topic)

    Are the power adapters that are sold in the store 110 V or 110-240 V.

    They are actually 100 to 240 volts in range.

  • Question about MagSafe Power Adapter

    I just got a new magsafe power adapter and wanted to know if leaving it connected to the electricity for too long damage it?
    Last question, my battery is dead, should I take it off andrun on the adapter, or just leave the battery on?
    A friend of mine told me tht "dead batteries" ruin power adapter?
    Thanks all

    I'm afraid you should buy a new battery, Frank.
    Running on the power adaptor alone will slow down your MBP. - see http://support.apple.com/kb/HT2332
    Running with a seriously defective battery installed, though, may not only place a heavy load on your adaptor but may result in the battery deforming (causing other damage) or worse.
    Leaving your adaptor plugged into the power when not being used probably won't hurt it, but it will use more electricity than a fluoro lightbulb.
    Rod

  • Power adaptor question

    Hello, I need to know is the Intel based Mac mini power adaptor (110w) is compatible to the G4 based Mac mini?
    Thanks for any help
    James

    When I was looking for an extra power adapter for an Intel Mini, I found many people were selling 85W adapters, meant for the G4 Mini, for use with the Intel version. I made sure I got a 110W version, which is working fine. I'm not of an electrician to know what would happen using a 110W adapter on a computer that's looking for only 85W, but to me it's not a risk worth taking.
    My 2 cents,
    Dan Clark

  • Question about using Macbook in Vietnam.

    I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

    You may need a plug adaptor, but you don't need a power converter.
    (43828)

  • Chromebook power adaptor

    I'm one of the lucky early adopters who got a suspect power adaptor with an HP11 Ch romebook. 
    I've been asked to return it, and onscreen the instructions ask me to choose which type it is. 
    Unfortunately not only is the text on the picture of the power adaptor far too small and dark for my ageing eyes to read, but so is the text on my own power adaptor and the serial number on the bottom of the computer!.  And I don't have a magnifying glass, let alone a microscope!
    I think I might have found the right computer serial number (It accepted the number I typed in, but I'm not sure I read it right).  
    My questions: 
    1: Bearing in mind I've at least selected the right country (UK), will it make much difference to me if I chose the wrong one? 
    2: Is there any way of writing to HP/Google directly about this problem?  I can't see an email address or web form. 
    3:  (A more general question Why oh why is all information on electronic equipment SO **bleep** SMALL?  Is there a reason for making it illegible to any eyes beyond teenage years and without a magnifying glass?  For reference, I am shortsighted but don't need specs to type on the Chromebook.  
    Thanks. 

    Since you must get the information from the label on the power adapter I suggest asking for assistance from a family member or friend. Otherwise you will have to find or purchase a magnifying glass so you can read the fine print.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Using power adaptor charger while playing iPod

    I have a charger for my iPod Mini. I think it's called a "USB-based power adaptor." When I got it about a year ago it cost about $20. Uses a cable for the iPod into it and then plugs into a standard outlet.
    I am also able to run my iPod through one of my more high-end stereo systems. A great advantage, particularly for "home recording," to listen and get full stereo sound.
    The question is:
    Can I use the charger adaptor while the iPod is playing? Either through the stereo system or using the iPod just by itself?
    It would seem that should be no problem. Wouldn't it be the same principle as using an iPod "dock?"
    If I can do this, the nice thing would be that I could keep my iPod fully charged while playing. Either through the stereo system or playing just the iPod alone.
    Could any harm be done by doing this?
    Thanks in advance.

    In theory, it shouldn't do any harm. The reason I added the qualifier is that its possible that a non-Apple charger could in some way, not be quite up to spec and could behave oddly. Of course, Apple chargers can go bad, too. iPods will stop accepting a charger once they are fully charged. I have used chargers while my iPod has been connected to speakers with no difficulty and no harm to the iPod.

  • Power adaptor warranty

    Is there any sort of warranty on the power adaptors? I am on my second power adaptor and it has stopped working after about 7 months. I'm hoping there is a one year warranty on it, since $70 is an outrageous price for an adaptor that won't even last a year. I can't find any of the documentation that came with the adaptor.

    when my iBooks power adapter cable broke after about 11 months of use (frayed by the connector and eventually broke in two), I called up applecare, and they replaced it no questions asked. Of course 7 months later when my logicboard died, they offered no help (out of warranty), so now I have a working power adapter, but an ibook that won't boot.
    I am happy to say though that the powercord for the macbooks are thicker, and will hopefully hold up more to the bending pressure than the ibooks one did.
    Phil

Maybe you are looking for