I::000 what does it mean

Dear XI expert
"Demo Examples Configuration guide"
6.2 Booking a Single Flight (Proxy-to-Idoc Communication)
Defining the Ports in the IDoc Adapter
http://static.flickr.com/1/123126333_8a728a87db_o.jpg
I got this error(?) message.
I::000
http://static.flickr.com/40/123126334_f53112c874_o.jpg
I can't find the reason.
Well, i'm not sure whether i'm right or not.
i tested WE60.
I found
http://static.flickr.com/38/123126335_1ac88080ab_o.jpg
I mean when i clicked [F8] - HTML Format.
Two basic types that haven't been checked as "released" show the following error message.
FLIGHTBOOKING_CREATEANDRESP0,
FLIGHTBOOKING_SENDRESPONSE01
Segment E1BPSBOSRE is unknown in Release 640/
Message no. EA312
Diagnosis
The system tried to read the IDoc segment 'E1BPSBOSRE' for Basis release '640' and application release ''.
System response
The segment 'E1BPSBOSRE' is not recognized in Basis release '640' with application release ''.
Procedure
Check the release entered. The segment is recognized in the system.
I also looked at
Idoc meta data does not come up in trx idx2
Re: Idoc meta data does not come up in trx idx2
Unable to Import IDOCs
Re: Unable to Import IDOCs
Importing Metadate from IDES 4.7 into Integration Server Rep
Re: Importing Metadate from IDES 4.7 into Integration Server Rep
However, i haven't solved it yet.
Thanks in advance.
Regards,
David
P.S. I found almost same situation with me.
IDoc meta data load problem in IDX2
Re: IDoc meta data load problem in IDX2 - PROBLEM RESOLVED
Error when Loading Metadata for IDOC Adapter
Re: Error when Loading Metadata for IDOC Adapter
Kurt, THANKS for all the help. I was finally able to load the idoc, I went it and check the user I generated with the appropiate privileges for ABC_107 and the role and profile were in red, I ran the comparison check, reset the password one more time and it worked.
I then was able to load the idoc with trans idx2, it gave me a segment version warning but at least I was able to finish the configuration for the Check Availability Seat Scenario. I am now running into other issues... (neverending story!) but I will post it in a different topic.. thanks again
Diego
===================Advertisement==========================
How do you search SDN?
What about [SDN Search Widget]?
SDN Search Widget
=========================================================
Message was edited by: David Kang (.) SAP@Home

Hi, David R.
Absolutely , i gave you points.
well, unlucky~.
107, 900 ( this is integration Server client)
[ST01 on Client 107]
http://static.flickr.com/1/123530468_ff4de7d99f_o.jpg
[Doing IDX2 on Client 900]
http://static.flickr.com/35/123530469_5d8b067a6b_o.jpg
[Turn off the trace on Client 107]
http://static.flickr.com/38/123530470_1f80bffc9e_o.jpg
[Trace Analysis on Client 107]
http://static.flickr.com/38/123530471_46563f8c96_o.jpg
[the result on Client 107]
http://static.flickr.com/34/123530472_3e81126e0f_o.jpg
what's wrong with this? humm...
Regards,
David K.

Similar Messages

What does it mean when it is disable for like 22,000,000 minutes?

when i turned on my ipod for the first time for 3 months it have said it was disable for 20,000,000 minutes what does that mean can i reset it or do i have to get a new one? please i really need the help
-Thnx
Victoria Kolasinski

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have a MacBook Pro that gave me a hardware error code 4SNS/1/40000000:Th 1H-81.000. What does this mean?

My USBs ports are charging all devices like my iPod and my back-up external Hard Drive but the Mac does not recognise any of them.
The Hardware Test showed the following error: 4SNS/1/40000000:Th 1H-81.000.
What does this mean?
Thanks!

Thanks for the prompt reply Kappy...
Does this mean I have to hand in my Mac for repair or is there a way to solve it independently?
Cheers!

Unicode convertible, what does it mean?

TYPES: BEGIN OF zbficheentry_list2,
FICHENO type zbficheentry-ficheno,
LOGISTICSCENTER type zbficheentry-logisticscenter,
KANTARNO type zbficheentry-kantarno,
TRDATE type zbficheentry-trdate,
TRHOUR type zbficheentry-trhour, line_color(4) type c,
END OF zbficheentry_list2.
DATA: zbficheentry_list TYPE STANDARD TABLE OF zbficheentry_list2 WITH HEADER LINE,
 wa_ficheentry TYPE zbficheentry_list2.
The program triggers the error:
The type of the database table and work area (or internal table)
"WA_FICHEENTRY" are not Unicode-convertible . . . . . . . . . .
What does this mean?
Please help.
Thanks.

Hello,
U have to use like this :
DATA: zbficheentry_list TYPE STANDARD TABLE OF zbficheentry_list2 WITH HEADER LINE,
wa_ficheentry TYPE line of zbficheentry_list2.
WHAT is UNICODE ?
About brief idea about unicode
In the past, SAP developers used various codes to encode characters of different alphabets, for example, ASCII, EBCDI, or double-byte code pages.
ASCII (American Standard Code for Information Interchange) encodes each character using 1 byte = 8 bit. This makes it possible to represent a maximum of 28 = 256 characters to which the combinations [00000000, 11111111] are assigned. Common code pages are, for example, ISO88591 for West European or ISO88595 for Cyrillic fonts.
EBCDI (Extended Binary Coded Decimal Interchange) also uses 1 byte to encode each character, which again makes it possible to represent 256 characters. EBCDIC 0697/0500 is an old IBM format that is used on AS/400 machines for West European fonts, for example.
Double-byte code pages require 1 or 2 bytes for each character. This allows you to form 216 = 65536 combinations where usually only 10,000 - 15,000 characters are used. Double-byte code pages are, for example, SJIS for Japanese and BIG5 for traditional Chinese.
Using these character sets, you can account for each language relevant to the SAP System. However, problems occur if you want to merge texts from different incompatible character sets in a central system. Equally, exchanging data between systems with incompatible character sets can result in unprecedented situations.
One solution to this problem is to use a code comprising all characters used on earth. This code is called Unicode (ISO/IEC 10646) and consists of at least 16 bit = 2 bytes, alternatively of 32 bit = 4 bytes per character. Although the conversion effort for the R/3 kernel and applications is considerable, the migration to Unicode provides great benefits in the long run:
The Internet and consequently also mySAP.com are entirely based on Unicode, which thus is a basic requirement for international competitiveness.
Unicode allows all R/3 users to install a central R/3 System that covers all business processes worldwide.
Companies using different distributed systems frequently want to aggregate their worldwide corporate data. Without Unicode, they would be able to do this only to a limited degree.
With Unicode, you can use multiple languages simultaneously at a single frontend computer.
Unicode is required for cross-application data exchange without loss of data due to incompatible character sets. One way to present documents in the World Wide Web (www) is XML, for example.
ABAP programs must be modified wherever an explicit or implicit assumption is made with regard to the internal length of a character. As a result, a new level of abstraction is reached which makes it possible to run one and the same program both in conventional and in Unicode systems. In addition, if new characters are added to the Unicode character set, SAP can decide whether to represent these characters internally using 2 or 4 bytes.
A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or an NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
You can also check out these official SAP locations on the SAP Service Marketplace:
http://service.sap.com/unicode
http://service.sap.com/unicode@SAP
http://service.sap.com/i18n
Regards,
Deepu.K

HT3782 What does it mean "Battery Health" Check battery in the battery menu bar?

What does it mean "Battery Health" Check battery in the battery menu bar?

Check the full status by going to the apple in the left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about the Cycle count, Battery Condition, Battery Capacisty, charge remaining.
Condition should be Normal or there is a problem
Ratio of charge remaining to cpacity should be close, round off, to the reported battery charge percentage.
Cycle count tells how many charge cycles the battery has been through, typical lifetime cycle count for a current generation battery is 1,000 cycles.

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

GetResponseCode() returns -1,what does it mean

Hi ,
The HttpURLConnection class's getResponseCode() method returns -1.
getResponseMessage() returns null.i m accessing my servlet through a proxy.i know only about 1xx to 5xx codes.i dont know what does it mean by -1.But at server side the request is properly sent and processed and i m getting 200 and ok after processing at serverside. the object is sent to client also. but it is not received by the client.
Null object is returned.I think proxy is the culprit.If anyone can help me what -1 means,it will be really greatfull to diagnoise my issue in detail and solve my problem soon.
Your help will be greatfull.
Thanks
prakash

As it says perfectly clearly, right there in the API documentation for the method:
"Returns -1 if no code can be discerned from the response (i.e., the response is not valid HTTP)."

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

When trying to update my IPad apps I am getting the message "Your Apple ID has been disabled". Still have more than 50$ in my account, so what does this mean ? What can I do to get my ID enabled again ?

when I am trying to download IPad updates I get the message "Your Apple ID has been disabled". What does this mean? How do I get my ID enabled again? Still got more than 50$ in my account !

Reset your Apple ID password here > Apple - My Apple ID
More information here > Apple ID: "This Apple ID has been disabled for security reasons" appears

I'm trying to upgrade to Mountain Lion and I get an error message that says "server error during download; 403 forbidden. What does this mean, what can I do? I had no problem downloading Lion.

Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.

403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such?

TS1424 When I click to play my songs in the library they will not play and show a circle with an exclamation point in the middle of it, what does that mean and how can I get them to play?

When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.

I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

I::000 what does it mean

Similar Messages

Maybe you are looking for