I-001 Error while installing drivers for Titanium HD

Just bought the Titanium HD and the drivers won't install. Error I-00 and install.log looks like this:
[Common Audio Driver Interface]GUID={700932B3-A964-4878-82A2-96054622AF7}Error=I-00 Creative\ShareDLL\CADI\CTCadiEP.dll not found.
No matter what I do, I can't get around this.. None of the installed apps will open it says card not found.
I did a search on the forum and am seeing people with varying degrees of this message for the last few years. What's going on? How do you really fix this? The file exists but InstallShield is not finding it...

After about 2.5 hours of messing with it, I finally got it installed. I really wish there was an easy way to delete drivers in windows so you can start over...
The things I tried:
1. Extracting the web download (the disc wasn't working either, even if I copy the files to the hard dri've) to a folder, didn't work.
2. Trying to follow Creative's instructions to find out what file wasn't copying (it's a good thing I know what I'm doing, the instructions are not accurate, or proper). The file was there, and in two spots.
3. Extracting all the cab files and manually putting the files in place and then rebooting, then trying to run setup again. Didn't work either.
Finally, I rebooted in safe mode and looked for files/drivers that I could install. Didn't find much, but I downloaded Driver Sweeper and ran that for Creative drivers. It found quite a few files. I removed them all, rebooted, and reran setup. This time it worked!
I had a first generation Audigy Platinum. Before I removed the card, I uninstalled the drivers and software. Apparently, it didn't remove all the files it was supposed to. So Driver Sweeper took care of the left behind files.

Similar Messages

Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

Getting error while installing update for Windows 10

Hi,
I am getting below error message while installing window 10 preview using window update option. Please help me how to address this issue to install window 10 preview
OS : Windows 7 Enterprise SP1 64 bit
Upgrade to Windows Technical Preview for Enterprise
Installation date: ‎10/‎3/‎2014 10:50 PM
Installation status: Failed
Error details: Code 80004005
Update type: Recommended
Install a preview of the next version of Windows.
More information:
http://go.microsoft.com/fwlink/?LinkID=507415
Help and Support:
http://go.microsoft.com/fwlink/?LinkId=507417
Regards
Selva

Hi Selva,
Can you download the ISO file from this site?
Download Windows Technical Preview
http://technet.microsoft.com/en-us/windows/dn783436
If so, please download the installer and make a DVD or bootable USB, then try to perform the installation from there.
Check following things first:
1.Disconnect any devices connected to the PC.
2.Disable/uninstall all anti-virus software (be sure to enable/reinstall later)
3.Install all important updates from Windows Update before updating.
If you still fail to install Windows, you will find $Windows.~BT under C drive (the system drive), please make sure to show up the Hidden file.
Then, locate to the $Windows.~BT folder and find \Sources\Panther\setuperr.log and setupact.log, please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

Error while installing Clusterware for RAC Oracle 10gR2?

Hi ,
I am installing clusterware 10.2.0.1 on Windows XP Service Pack 3.While installing i got the below errors.
Checking operating system requirements ...
Expected result: One of 5.0,5.2
Actual Result: 5.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows XP Version 5.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
How can i overcome this problem? Can anybody helpme.
Thanks
Rajesh

Which edition of Windows XP are you running? Home edition is not supported for Oracle products.

Error while installing SSMA for Oracle Extension Pack 5.3

When installing the database utilities portion of the SSMA for Oracle Extension Pack 5.3 setup, the error below occurs.
Invalid connection (CREATE ASSEMBLY failed because it could not open the physical file "C:\Microsoft SQL Server Migration Assistant for Oracle Extension Pack\bin\ext\SSMA4OracleSQLServerCollections.NET.dll": 3(The system cannot find the path specified.).)
It appears that the installer is using the path: "C:\Program Files\Microsoft SQL Server Migration Assistant for Oracle Extension Pack"

Hi,
According to your description, this error might be caused by the account you used to install SQL Server Migration Assistant for Oracle Extension Pack. We can troubleshoot this issue as follows:
Verify the installation file is complete before installing this Extension Pack.
When you install SSMA for Oracle Extension Pack, we need to make sure you right click the pack and select ‘Run as administrator ’. Also we ensure that your account has Read/Write permission on the bin folder.
Additionally, before installing SSMA for Oracle Extension Pack, we need to
make sure that the system meets the following requirements:
SQL Server 2005 or higher is installed.
Microsoft  Windows Installer 3.1 or a later version.
SQL Server Browser service is running.
For more details, you can review the related links.
http://www.microsoft.com/en-us/download/details.aspx?id=42655
http://msdn.microsoft.com/en-us/library/hh313165(v=sql.110).aspx
http://blogs.msdn.com/b/ssma/archive/2011/05/12/ssma-5-0-extension-pack-installation-error.aspx
Thanks
Lydia Zhang
&lt;p style=&quot;margin:0cm 0cm 0pt&quot;&gt;&lt;span lang=&quot;EN-US&quot; style=&quot;color:#0070c0; font-family:&#39;Segoe UI &#39;,&#39;sans-serif &#39;;
font-size:10pt&quot;&gt;Lydia Zhang&lt;br/&gt; TechNet Community Support&lt;/span&gt;&lt;/p&gt; &lt;p style=&quot;margin:0cm 0cm 0pt&quot;&gt;&lt;a href=&quot;http://blogs.technet.com/b/onescript&quot;
rel=&quot;nofollow&quot;&gt;&lt;img src=&quot;https://xnoegg.bay.livefilestore.com/y1plmwd9pFqoTZWcmr6-bsBuS7hTcNbr8YdT4WL3RRAuhDPVyUUOVchQt3EexNEBj4xYyornsD1kyLmtVqqsDfKv3PEEg9ejQzT/signature.jpg?psid=1&quot;
alt=&quot;&quot; width=&quot;430&quot; height=&quot;30.2&quot;&gt;&lt;/a&gt;&lt;/p&gt;

Error on installing drivers for HP Officejet 4500 G540n

After changing the printer cartridges in the printer it would not print, saying that the print spooler was not running. After several attempts to restart spooler, I uninstalled the print drivers, and then tried to reinstall them. I was given an error 'The remote procedure call failed' and was unable to finish the installation. How can I fix this problem.

Hello there Lee-J,
Welcome to the Forums
I noticed your post about the issue you are having installing your Officejet 4500 G510n.
I would like to do my best at helping you with this issue, however, I would need to know your Operating System so I can research this for you.
Please respond with your OS and I will look into this.
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error while installing NW for abap free trial on SLES

The error I get after entering new passwords for n4sadm etc:
unpacking /root/Desktop/server/TAR/x86_64/SAPDB_I.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPDB_I.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
unpacking /root/Desktop/server/TAR/x86_64/SAPDB_II.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPDB_II.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
unpacking /root/Desktop/server/TAR/x86_64/SAPDB_III.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPDB_III.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
unpacking /root/Desktop/server/TAR/x86_64/SAPN4S.tar.bz2
tar: /root/Desktop/server/TAR/x86_64/SAPN4S.tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
cp: cannot stat `/home/n4sadm/sysctl.txt': No such file or directory
Update the necessary information in sysctl.conf:
error: unable to open preload file "/etc/sysctl.conf"
ln: creating symbolic link `/etc/init.d/rc3.d/S99n4shost' to `/home/n4sadm/S99_n4shost.sh': File exists
./INSTALL.SH: line 420: /home/n4sadm/S99_n4shost.sh: No such file or directory
find: /usr/sap/N4S: No such file or directory
find: /usr/sap/trans: No such file or directory
find: /sapmnt: No such file or directory
find: /sapdb: No such file or directory
find: /sapdb: No such file or directory
find: /sapdb: No such file or directory
./INSTALL.SH: line 461: cd: /usr/sap/N4S/SYS/: No such file or directory
Ok
What is missing?
thx in advance.
Jay

Hi,
can you please explain the problem more clearly.
Linux is the system OS . you are using Max Db database.
i think that you are trying to untar Some database CD file .please explain the situation.
What i can undestand from this :
find: /usr/sap/N4S: No such file or directory
find: /usr/sap/trans: No such file or directory
find: /sapmnt: No such file or directory
please check the file system are mounted or not.
thanks Rishi Abrol

1607 Error while installing iTunes for Windows

I have a new laptop that i just picked up. Its a gateway with windows xp media center edition,2.0 gb of ram and a AMD Athlon 64. I am trying to install iTunes on it so i can stream my library on to it from my MacBook.
When ever i try to do this i keep getting this 1607 error. I have done everything from the apple support site and the other web pages that they link to. Any other ideas.

I'm having the same problem. Same error message. tried to re0install from the CD and frm the web site. Still same error

Error while installing network adapter driver on HP ML 370 G4

We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
I don't know what to do...
Can anybody help me??
# pkgadd -d /tmp/BRCMbcme.pkg
The following packages are available:
1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
(i386) v7.5.12
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
Copyright (c) 2001-2003 Broadcom Corporation, Inc.
All rights reserved.
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
## Installing part 1 of 1.
/kernel/drv/bcme
/kernel/drv/bcme.conf
/usr/share/man/sman7d/bcme.7d
[ verifying class <none> ]
## Executing postinstall script.
("pci14e4,1644") already in use as a driver or alias.
postinstall: add_drv bcme failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <BRCMbcme> failed.
#

If you're sure that you have a Broadcom BCM57xx
device installed in the machine, then you should have a look at
"prtconf -pv" output, locate the Ethernet device, and check the
"vendor-id" / "device-id" property for the NIC.
If the Broadcom device is compatible with Sun's "bge" driver, you
can try to install an addition driver binding entry for your device,
using the update_drv(1M) command
update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
prtconf -pv output).

Error in Installing RCU for Oracle Webcenter Content Imaging

Hi,
I am comming across this error while installing RCU for Oracle Webcenter Imaging with Mircosoft SQL 2005 as the backend database. I am pasting the IPM.log file below which shows the error during the installation. Please help me from this.
JDBC SQLException - ErrorCode: 102SQLState:HY000 Message: [FMWGEN][SQLServer JDBC Driver][SQLServer]Incorrect syntax near 'Rem'.
Error encountered executing SQL statement FileName: 'D:\Oracle\middleware\RepositoryCreationUtility\rcuHome\\rcu\integration\\ipm\sql\createschema_ipm_sqlserver.sql' LineNumber: '18'
SQL Statement: [execute as login = '$(SCHEMA_USER)'
Rem Copyright (c) 2007, 2013, Oracle and/or its affiliates.
Rem All rights reserved.
CREATE TABLE DEFINITION (DEFINITION_ID NUMERIC(19) NOT NULL, DEFINITION_VERSION NUMERIC(19) NOT NULL, DEFINITION_TYPE $(RCU_VARCHAR)(16) NULL, DESCRIPTION $(RCU_VARCHAR)(1000) NULL, NAME $(RCU_VARCHAR)(200) NULL, PRIMARY KEY (DEFINITION_ID, DEFINITION_VERSION));
CREATE TABLE DEFINITION_SECURITY (RID NUMERIC(19) NOT NULL, GUID $(RCU_VARCHAR)(255) NULL, DEFINITION_ID NUMERIC(19) NOT NULL, NAME $(RCU_VARCHAR)(255) NULL, SECURITYMEMBER_TYPE $(RCU_VARCHAR)(8) NULL, DEFINITION_VERSION NUMERIC(19) NOT NULL, CAN_DELETE SMALLINT NULL, CAN_GRANTACCESS SMALLINT NULL, CAN_MANAGE SMALLINT NULL, CAN_MODIFY SMALLINT NULL, CAN_VIEW SMALLINT NULL, PRIMARY KEY (RID, DEFINITION_ID, DEFINITION_VERSION));
CREATE TABLE AUDIT_HISTORY (AUDITID NUMERIC(19) NOT NULL, AUDIT_DATE DATETIME NULL, PARAM1 $(RCU_VARCHAR)(255) NULL, PARAM2 $(RCU_VARCHAR)(255) NULL, SUBJECTID NUMERIC(19) NULL, AUDIT_TYPE $(RCU_VARCHAR)(32) NULL, USERNAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (AUDITID));
CREATE TABLE APP_PROPERTIES (FASTCHECKIN BIT default 0 NULL, FULLTEXTSEARCH BIT default 0 NULL, APP_ID NUMERIC(19) NOT NULL, NEXTFIELDID NUMERIC(19) NULL, APP_VERSION NUMERIC(19) NOT NULL, REPOSITORY_ID NUMERIC(19) NULL, REPOSITORY_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (APP_ID, APP_VERSION));
CREATE TABLE APP_FIELDDEFINITION (FIELD_ID NUMERIC(19) NOT NULL, APP_ID NUMERIC(19) NOT NULL, INDEXED BIT default 0 NULL, LENGTH INTEGER NULL, NAME $(RCU_VARCHAR)(50) NULL, REQUIRED BIT default 0 NULL, SCALE INTEGER NULL, FIELD_TYPE $(RCU_VARCHAR)(8) NULL, APP_VERSION NUMERIC(19) NOT NULL, DEFAULTVALUE_TYPE $(RCU_VARCHAR)(255) NULL, DEFAULTVALUE $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (FIELD_ID, APP_ID, APP_VERSION));
CREATE TABLE APP_PICKLIST (PICKLIST_ID NUMERIC(19) NOT NULL, APP_ID NUMERIC(19) NOT NULL, FIELD_ID NUMERIC(19) NOT NULL, APP_VERSION NUMERIC(19) NOT NULL, ITEMVALUE_TYPE $(RCU_VARCHAR)(255) NULL, ITEMVALUE $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (PICKLIST_ID, APP_ID, FIELD_ID, APP_VERSION));
CREATE TABLE APP_LIFECYCLEPOLICY (APP_ID NUMERIC(19) NOT NULL, RETENTIONPOLICY $(RCU_VARCHAR)(255) NULL, VOLUME_NAME $(RCU_VARCHAR)(200) NULL, APP_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (APP_ID, APP_VERSION));
CREATE TABLE APP_BPELCONFIG (COMPOSITE $(RCU_VARCHAR)(255) NULL, ENABLED BIT default 0 NULL, APP_ID NUMERIC(19) NOT NULL, SERVICE_OPERATION $(RCU_VARCHAR)(255) NULL, SERVICE $(RCU_VARCHAR)(255) NULL, APP_VERSION NUMERIC(19) NOT NULL, CONNECTION_ID NUMERIC(19) NULL, CONNECTION_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (APP_ID, APP_VERSION));
CREATE TABLE APP_BPELPAYLOADITEM (PAYLOAD_KEY $(RCU_VARCHAR)(255) NOT NULL, APP_ID NUMERIC(19) NOT NULL, MAPPINGFUNCTION $(RCU_VARCHAR)(32) NULL, PAYLOAD_VALUE $(RCU_VARCHAR)(255) NULL, APP_VERSION NUMERIC(19) NOT NULL, XMLTYPE $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (PAYLOAD_KEY, APP_ID, APP_VERSION));
CREATE TABLE APP_STORAGESTAGE (SEQNUM NUMERIC(19) NOT NULL, DURATION INTEGER NULL, DURATIONUNIT $(RCU_VARCHAR)(8) NULL, APP_ID NUMERIC(19) NOT NULL, INDEFINITE BIT default 0 NULL, APP_VERSION NUMERIC(19) NOT NULL, VOLUME_NAME $(RCU_VARCHAR)(200) NULL, PRIMARY KEY (SEQNUM, APP_ID, APP_VERSION));
CREATE TABLE DOCUMENT_SECURITY (RID NUMERIC(19) NOT NULL, GUID $(RCU_VARCHAR)(255) NULL, APP_ID NUMERIC(19) NOT NULL, NAME $(RCU_VARCHAR)(255) NULL, SECURITYMEMBER_TYPE $(RCU_VARCHAR)(8) NULL, APP_VERSION NUMERIC(19) NOT NULL, CAN_ANNOTHIDDEN SMALLINT NULL, CAN_ANNOTRESTRICTED SMALLINT NULL, CAN_ANNOTSTANDARD SMALLINT NULL, CAN_DELETE SMALLINT NULL, CAN_GRANTACCESS SMALLINT NULL, CAN_LOCKADMINISTRATOR SMALLINT NULL, CAN_VIEW SMALLINT NULL, CAN_WRITE SMALLINT NULL, PRIMARY KEY (RID, APP_ID, APP_VERSION));
CREATE TABLE INPUT_PROPERTIES (INPUT_ID NUMERIC(19) NOT NULL, ON_LINE BIT default 0 NULL, PRIORITY INTEGER NULL, INPUT_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (INPUT_ID, INPUT_VERSION));
CREATE TABLE INPUT_MAPPINGS (INPUT_ID NUMERIC(19) NOT NULL, FILEINPUTSECTION $(RCU_VARCHAR)(255) NULL, INPUT_VERSION NUMERIC(19) NOT NULL, APP_ID NUMERIC(19) NULL, APP_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (INPUT_ID, INPUT_VERSION));
CREATE TABLE INPUT_FIELDMAP (SEQNUM NUMERIC(19) NOT NULL, DATEFORMAT $(RCU_VARCHAR)(255) NULL, INPUT_ID NUMERIC(19) NOT NULL, INPUTSECTION $(RCU_VARCHAR)(255) NULL, USEDEFAULT BIT default 0 NULL, INPUT_VERSION NUMERIC(19) NOT NULL, APP_ID NUMERIC(19) NULL, APP_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (SEQNUM, INPUT_ID, INPUT_VERSION));
CREATE TABLE INPUT_SOURCEPROPERTIES (DATASAMPLE $(RCU_VARCHAR)(255) NULL, DATASOURCE $(RCU_VARCHAR)(255) NULL, INPUT_ID NUMERIC(19) NOT NULL, INPUTSOURCE $(RCU_VARCHAR)(255) NULL, INPUT_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (INPUT_ID, INPUT_VERSION));
CREATE TABLE INPUT_SOURCESETTING (SETTING_KEY $(RCU_VARCHAR)(255) NOT NULL, INPUT_ID NUMERIC(19) NOT NULL, SETTING_VALUE $(RCU_VARCHAR)(255) NULL, INPUT_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (SETTING_KEY, INPUT_ID, INPUT_VERSION));
CREATE TABLE SEARCH_PARAMETER (PARAMETER_ID NUMERIC(19) NOT NULL, DEFAULTOPERATOR INTEGER NULL, SEARCH_ID NUMERIC(19) NOT NULL, NAME $(RCU_VARCHAR)(255) NULL, OPERATORTEXT $(RCU_VARCHAR)(255) NULL, PICKLISTAPPLICATIONID NUMERIC(19) NULL, PICKLISTFIELDID NUMERIC(19) NULL, PROMPT $(RCU_VARCHAR)(255) NULL, READONLY BIT default 0 NULL, REQUIRED BIT default 0 NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, SEARCHVALUETYPE INTEGER NULL, FIELD_TYPE $(RCU_VARCHAR)(8) NULL, FIELD_VALUE $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (PARAMETER_ID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_POSSIBLEOPERATOR (OPERATOR_ID NUMERIC(19) NOT NULL, SEARCH_ID NUMERIC(19) NOT NULL, OPERATOR INTEGER NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, PARAMETER_ID NUMERIC(19) NULL, PRIMARY KEY (OPERATOR_ID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_RESULTCOLUMN (RESULT_COLUMN_ID NUMERIC(19) NOT NULL, COLUMNTITLE $(RCU_VARCHAR)(255) NULL, SEARCH_ID NUMERIC(19) NOT NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (RESULT_COLUMN_ID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_SELECTEDFIELD (SELECTEDFIELDID NUMERIC(19) NOT NULL, SEARCH_ID NUMERIC(19) NOT NULL, PERSISTEDAPPLICATIONID NUMERIC(19) NULL, PERSISTEDFIELDID NUMERIC(19) NULL, PROPERTY INTEGER NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, RESULT_COLUMN_ID NUMERIC(19) NULL, PRIMARY KEY (SELECTEDFIELDID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_PROPERTIES (SEARCHPROPERTIESID NUMERIC(19) NOT NULL, SEARCH_ID NUMERIC(19) NOT NULL, MAXROWS INTEGER NULL, ON_LINE BIT default 0 NULL, SEARCHINSTRUCTIONS $(RCU_VARCHAR)(1000) NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (SEARCHPROPERTIESID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_NODE (SEARCHNODEID NUMERIC(19) NOT NULL, DTYPE $(RCU_VARCHAR)(31) NULL, ALWAYSDISPLAYPARENTHESES BIT default 0 NULL, SEARCH_ID NUMERIC(19) NOT NULL, LEFTID NUMERIC(19) NULL, RIGHTID NUMERIC(19) NULL, SEARCHOPERATOR INTEGER NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, PARAMETERNAME $(RCU_VARCHAR)(255) NULL, PROPERTY INTEGER NULL, FIELD_ID NUMERIC(19) NULL, FIELD_NAME $(RCU_VARCHAR)(255) NULL, SEARCHVALUETYPE INTEGER NULL, FIELD_TYPE $(RCU_VARCHAR)(8) NULL, FIELD_VALUE $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (SEARCHNODEID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_APP_EXPR (APPLICATIONEXPRESSIONID NUMERIC(19) NOT NULL, SEARCH_ID NUMERIC(19) NOT NULL, ROOTID NUMERIC(19) NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, APP_ID NUMERIC(19) NULL, APP_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (APPLICATIONEXPRESSIONID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE SEARCH_APP_ITEM (APPITEMID NUMERIC(19) NOT NULL, FIELDDECIMAL BIT default 0 NULL, FIELDSCALE INTEGER NULL, SEARCH_ID NUMERIC(19) NOT NULL, REPOSITORYDOCUMENTID $(RCU_VARCHAR)(255) NULL, REPOSITORYFIELDID $(RCU_VARCHAR)(255) NULL, SEARCH_VERSION NUMERIC(19) NOT NULL, APPLICATION_ID NUMERIC(19) NULL, APPLICATION_NAME $(RCU_VARCHAR)(255) NULL, FIELD_ID NUMERIC(19) NULL, FIELD_NAME $(RCU_VARCHAR)(255) NULL, SOURCE_ID NUMERIC(19) NULL, SOURCE_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (APPITEMID, SEARCH_ID, SEARCH_VERSION));
CREATE TABLE PREFERENCES (CONTEXT $(RCU_VARCHAR)(255) NOT NULL, USERGUID $(RCU_VARCHAR)(255) NOT NULL, SETTING $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (CONTEXT, USERGUID));
CREATE TABLE SYSTEM_SECURITY (SYSTEMAREA $(RCU_VARCHAR)(16) NOT NULL, RID NUMERIC(19) NOT NULL, GUID $(RCU_VARCHAR)(255) NULL, NAME $(RCU_VARCHAR)(255) NULL, SECURITYMEMBER_TYPE $(RCU_VARCHAR)(8) NULL, CAN_ADMINISTOR SMALLINT NULL, CAN_CREATE SMALLINT NULL, PRIMARY KEY (SYSTEMAREA, RID));
CREATE TABLE BATCH (BATCHID NUMERIC(19) NOT NULL, CREATEDBYPROCESS $(RCU_VARCHAR)(255) NULL, CURRENTSTATE $(RCU_VARCHAR)(255) NULL, ENDTIME DATETIME NULL, FAILEDDOCCOUNT INTEGER NULL, SOURCENAME $(RCU_VARCHAR)(255) NULL, SOURCETIME DATETIME NULL, STARTTIME DATETIME NULL, SUCCESSFULDOCCOUNT INTEGER NULL, INPUT_ID NUMERIC(19) NULL, INPUT_NAME $(RCU_VARCHAR)(255) NULL, APP_ID NUMERIC(19) NULL, APP_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (BATCHID));
CREATE TABLE TICKETS (TICKET_ID $(RCU_VARCHAR)(255) NOT NULL, EXPIRATION DATETIME NULL, SINGLEUSE BIT default 0 NULL, TICKETEXPIRES BIT default 0 NULL, PRIMARY KEY (TICKET_ID));
CREATE TABLE TICKETPARAMETERS (ID INTEGER NOT NULL, PARAMETERNAME $(RCU_VARCHAR)(255) NULL, PARAMETERVALUE $(RCU_VARCHAR)(255) NULL, PARAM_TICKET_ID $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (ID));
CREATE TABLE CONNECTION_PROPERTIES (CONNECTION_TYPE $(RCU_VARCHAR)(255) NULL, CONNECTION_ID NUMERIC(19) NOT NULL, CONNECTION_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (CONNECTION_ID, CONNECTION_VERSION));
CREATE TABLE CONNECTION_DETAILS (DETAILKEY $(RCU_VARCHAR)(255) NOT NULL, DETAILVALUE $(RCU_VARCHAR)(255) NULL, CONNECTION_ID NUMERIC(19) NOT NULL, CONNECTION_VERSION NUMERIC(19) NOT NULL, PRIMARY KEY (DETAILKEY, CONNECTION_ID, CONNECTION_VERSION));
CREATE TABLE REPOSITORY_APPCONTEXT (APP_ID NUMERIC(19) NOT NULL, PRIMARY KEY (APP_ID));
CREATE TABLE REPOSITORY_APPDETAILS (DETAILKEY $(RCU_VARCHAR)(255) NOT NULL, APP_ID NUMERIC(19) NOT NULL, DETAILVALUE $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (DETAILKEY, APP_ID));
CREATE TABLE FILINGSTATE (ID INTEGER NOT NULL, BATCHID NUMERIC(19) NULL, DOCUMENTNUMBER NUMERIC(19) NULL, GOODDOCCOUNT NUMERIC(19) NULL, INPUTSOURCENAME $(RCU_VARCHAR)(255) NULL, JOBDATASOURCE $(RCU_VARCHAR)(255) NULL, APP_ID NUMERIC(19) NULL, APP_NAME $(RCU_VARCHAR)(255) NULL, INPUT_ID NUMERIC(19) NULL, INPUT_NAME $(RCU_VARCHAR)(255) NULL, PRIMARY KEY (ID));
CREATE TABLE BPEL_FAULT_DATA (DOCID $(RCU_VARCHAR)(40) NOT NULL, APPID NUMERIC(19) NULL, BATCHID NUMERIC(19) NULL, FAULTDATE DATETIME NULL, FAULTMESSAGE $(RCU_VARCHAR)(1000) NULL, PRIMARY KEY (DOCID));
ALTER TABLE DEFINITION_SECURITY ADD CONSTRAINT DFNTONSECURITYDFNTONID FOREIGN KEY (DEFINITION_ID, DEFINITION_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE APP_PROPERTIES ADD CONSTRAINT APP_PROPERTIES_APP_ID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE APP_FIELDDEFINITION ADD CONSTRAINT PPFIELDDEFINITIONAPPID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE APP_PICKLIST ADD CONSTRAINT APP_PICKLIST_FIELD_ID FOREIGN KEY (FIELD_ID, APP_ID, APP_VERSION) REFERENCES APP_FIELDDEFINITION (FIELD_ID, APP_ID, APP_VERSION);
ALTER TABLE APP_LIFECYCLEPOLICY ADD CONSTRAINT PPLIFECYCLEPOLICYAPPID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE APP_BPELCONFIG ADD CONSTRAINT APP_BPELCONFIG_APP_ID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE APP_BPELPAYLOADITEM ADD CONSTRAINT PPBPELPAYLOADITEMAPPID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES APP_BPELCONFIG (APP_ID, APP_VERSION);
ALTER TABLE APP_STORAGESTAGE ADD CONSTRAINT APP_STORAGESTAGEAPP_ID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES APP_LIFECYCLEPOLICY (APP_ID, APP_VERSION);
ALTER TABLE DOCUMENT_SECURITY ADD CONSTRAINT DOCUMENTSECURITYAPP_ID FOREIGN KEY (APP_ID, APP_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE INPUT_PROPERTIES ADD CONSTRAINT INPUTPROPERTIESINPUTID FOREIGN KEY (INPUT_ID, INPUT_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE INPUT_MAPPINGS ADD CONSTRAINT INPUT_MAPPINGSINPUT_ID FOREIGN KEY (INPUT_ID, INPUT_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE INPUT_FIELDMAP ADD CONSTRAINT INPUT_FIELDMAPINPUT_ID FOREIGN KEY (INPUT_ID, INPUT_VERSION) REFERENCES INPUT_MAPPINGS (INPUT_ID, INPUT_VERSION);
ALTER TABLE INPUT_SOURCEPROPERTIES ADD CONSTRAINT NPTSURCEPROPERTIESNPTD FOREIGN KEY (INPUT_ID, INPUT_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE INPUT_SOURCESETTING ADD CONSTRAINT NPTSOURCESETTINGNPUTID FOREIGN KEY (INPUT_ID, INPUT_VERSION) REFERENCES INPUT_SOURCEPROPERTIES (INPUT_ID, INPUT_VERSION);
ALTER TABLE SEARCH_PARAMETER ADD CONSTRAINT SARCHPARAMETERSEARCHID FOREIGN KEY (SEARCH_ID, SEARCH_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE SEARCH_POSSIBLEOPERATOR ADD CONSTRAINT SRCHPSSBLPERATORPRMTRD FOREIGN KEY (PARAMETER_ID, SEARCH_ID, SEARCH_VERSION) REFERENCES SEARCH_PARAMETER (PARAMETER_ID, SEARCH_ID, SEARCH_VERSION);
ALTER TABLE SEARCH_RESULTCOLUMN ADD CONSTRAINT SRCHRESULTCOLUMNSRCHID FOREIGN KEY (SEARCH_ID, SEARCH_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE SEARCH_SELECTEDFIELD ADD CONSTRAINT SRCHSLCTDFELDRSLTCLMND FOREIGN KEY (RESULT_COLUMN_ID, SEARCH_ID, SEARCH_VERSION) REFERENCES SEARCH_RESULTCOLUMN (RESULT_COLUMN_ID, SEARCH_ID, SEARCH_VERSION);
ALTER TABLE SEARCH_PROPERTIES ADD CONSTRAINT SARCHPROPERTIESSARCHID FOREIGN KEY (SEARCH_ID, SEARCH_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE SEARCH_NODE ADD CONSTRAINT SEARCH_NODE_SEARCH_ID FOREIGN KEY (SEARCH_ID, SEARCH_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE SEARCH_APP_EXPR ADD CONSTRAINT SEARCHAPPEXPRSEARCH_ID FOREIGN KEY (SEARCH_ID, SEARCH_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE SEARCH_APP_ITEM ADD CONSTRAINT SEARCHAPPITEMSEARCH_ID FOREIGN KEY (SEARCH_ID, SEARCH_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE TICKETPARAMETERS ADD CONSTRAINT TCKTPRMETERSPRMTCKETID FOREIGN KEY (PARAM_TICKET_ID) REFERENCES TICKETS (TICKET_ID);
ALTER TABLE CONNECTION_PROPERTIES ADD CONSTRAINT CNNCTNPRPERTIESCNNCTND FOREIGN KEY (CONNECTION_ID, CONNECTION_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE CONNECTION_DETAILS ADD CONSTRAINT CNNCTNDETAILSCNNCTONID FOREIGN KEY (CONNECTION_ID, CONNECTION_VERSION) REFERENCES DEFINITION (DEFINITION_ID, DEFINITION_VERSION);
ALTER TABLE REPOSITORY_APPDETAILS ADD CONSTRAINT RPSITORYAPPDETAILSPPID FOREIGN KEY (APP_ID) REFERENCES REPOSITORY_APPCONTEXT (APP_ID);
CREATE TABLE SEQUENCE (SEQ_NAME $(RCU_VARCHAR)(50) NOT NULL, SEQ_COUNT NUMERIC(28) NULL, PRIMARY KEY (SEQ_NAME));
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_SECURITY', 0);
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_BATCH', 0);
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_FILINGSTATE', 0);
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_NAMEID', 0);
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_GEN', 0);
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_TICKET_PARAM', 0);
INSERT INTO SEQUENCE(SEQ_NAME, SEQ_COUNT) values ('SEQ_AUDIT', 0);
revert
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Incorrect syntax near 'Rem'.
Thanks,
Kumar G

Hi,
I just had this messages yesterday during my install.
You have to update those 2 files:
<RCU Home>\rcu\integration\ipm\sql\createtables_ipm_sqlserver.sql
<RCU Home>\rcu\integration\ipm\sql\createuser_ipm_sqlserver.sql
The first 2 lines begin with "Rem ..." which is not correct for SQL Server : I added "--" and it worked.
Regards,
Guénaël

X-Fi Extreme Music || when installing drivers for windows vista 32 bits, error mess

I get an error message when I install windows vista 32bits drivers for my X-Fi Extreme Music... it says, error while installing, can't find a compatible product on your system, verify if it has been corectly installed ... BUT INSTALLING I JUST WHAT I WANNA DO ! WTF?
all other software for hardware management can see that my sound card is connected to my mother board, so i don't understand why the driver installer can't see it too and install the drivers ...
Could someone give me a tip to help me to install my drivers please?
i got windows vista 32bits build 6000 , X-Fi Extreme Music, 2048 RAM, Pentium4 3.6ghz 250 go hdd space ...
I'm waiting for some cool answers, thanks ! ...

You are wrong. The 2.3 are for extreme music, you are thinking about extreme audio. Creative have really made a blunder with these names, not strange many are having problems. Propably trying to install extreme audio drivers on extreme music, and the other way around!?
Check that you have the right drivers, if you do. Try the trick where you unpack the driver exe file, so you get all the files from the installer on to a folder of youre choosing. Then use the "Creative Update Utility" popup to install/force the drivers to install. If you dont know what im talking about, search the forums, its been explained many times here.

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error while installing the SAP J2EE add-on for SAP NW XI installation

Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
George

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

I-001 Error while installing drivers for Titanium HD

Similar Messages

Maybe you are looking for