I accidentally highlighted my camera raw folder and it's contents in my library on my Mac. Please help me get it back.

I opened my library on my mac and was looking for my settings file under camera raw and I didn't see it. As I was looking, I accidentally highlighted the camera raw folder and it's contents, and when I let go, they were gone.
unfortunately my laptop has been off backup and I can't restore thru time machine.
any suggestions?

thank you
I am downloading it now and have installed it.
I am trying to install some presets from mastinlabs.com, and in their instructions it says to do the following:
open library
open application support
open adobe
open camera raw
open settings
I don't have "settings" in my camera raw folder.
What do I do?

Similar Messages

I do not remember my password of filevault and i can not install some softwares on my mac please help me

i do not remember my password of filevault and i can not install some softwares on my mac please help me

Are you sure FileVault is active? You could not have started up without entering the password.
If you are sure, see below.
If you forget the password and FileVault is on

I just got my mac and well, i made a mistake. i accidentally put my downloads in the trash and forgot about it, i neglected to look at what was in the trash when i pressed the 'empty trash' button. please help me get it back!!!!

I just got my imc, and well....i made a mistake. i accidentally put my downloads in the trash and forgot about it. when i emptied the trash later i neglected to look what was in the trash before i deleted it adn i cant get it back. please help me!

Go back to the site(s) from where you got the downloads from & redownload them.

Camera raw is not updating to 8.6 only the DNG converter is, please help

I have Camera raw 7.1 , it doesn't open Nikon D810 NEF files,
I Downloaded the 7.2 , the 8.3 and 8.6 but the package from Adobe only updates my DNG converter and not my camera raw... I tried and tried, nothing is working. I need to get photoshop and bride to open These files ASAP (I know its in the 8.6) package....
Also the help tab doesn't allow me to update in photoshop !

Camera Raw plug-in installer
Found the solution !!

HT4623 um i updated my ipod just now and now it says that i have to connect to itunes and it is not lsetting me at all i am really mad because i can not scses my ipod or anything on it so could u please help me get myipod back up and running

please help me with this im very upset and need help figuering out what im supposed to do anmd i need to get all of my music and every thing back sooo plesae help me
it would be amzinfg and if u could email me at [email protected] and help me fix my iopd please pleas ethis is very upsetting or call me at 1715 455 1315 that would be amazing if u could help me fix this asap

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- On a computer with iTunes verion 11.1 sing into iTunes with your account and agree there. Then try another reset on the iPod
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My mac failed a month ago and apple needed to put in a new hard drive, which deleted everything. so, i need to put music from my iPhone to my iTunes library on my mac, please help?

my mac failed a month ago and apple needed to put in a new hard drive, which deleted everything. i need to put music from my iphone to my itunes library, please help?

Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

I just upgraded to iTunes 11 and lost the contents of most of my playlists. How do I get them back?

I lost most of my playlists. Is there a way to get them back without downgrading to iTunes 10.7?

You don't. You buy one and only one download. it is your responsibility to move/copy/backup your music.
It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Use you backup copy to put everything back.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod: File>Transfer Purchases

I restored my phone from a previous back up and now all my apps are gone. Any idea on how to get them back?

I had liquid damage to my phone and had to receive a new one so I went home to restore it to its old settings from my back up on 5/8/11. I've had an iphone since 2008 so I have a lot of data and apps saved on to my computer, many of which I paid for. When my back up finished all my music, contacts, photos were restored but none of my apps. Can someone please help me get them back? Thank you!

After you restore from backup, you MUST sync to restore your iTunes content. No iTunes content is included in the iPhone backup. Your apps should be in your iTunes library, just sync them back to your phone. If for some reason your apps are not in your library, you can re-download them for free:
http://support.apple.com/kb/ht2519

Output sharpening in Adobe Camera Raw (ACR) and Photoshop CS5

Output sharpening in Adobe Camera Raw (ACR) and Photoshop CS5
I want to do two-pass sharpening - capture and output - with output capture done just before I print. I do the initial (capture) sharpening in the ACR Detail/Sharpening panel, with Amount slider set to, for example, 100. Then, I open the image to PS CS5 as a Smart Object, and use layers and masks for further editting.
My question is, can I go back to ACR for the final (output) sharpening pass? When I re-open the file in ACR, the Sharpening Amount slider is back to zero, but the other three sliders are still at the settings I used at the start of the process, i.e., the capture sharpening. If I again set the Amount slider to a positive value, then again open the image in PS for printing, will my second pass through the ACR Sharpening panel take effect - will it accumulate on top of the initial sharpening?
By the way, the reason I want do output sharpening in ACR rather than, say, PS Unsharp Mask, is so I can use the Masking slider in ACR, which is much easier than the comparable techniques available in PS. I am aware that some say you should not do any masking for the output sharpening. I'd like to though.
Thanks for ideas.

This is pretty much the way I do it, and I also always found ACR sharpening superior to anything in Photoshop. There is the "sharpen for output" in ACR, but you have little control over it.
The tricky part is feeding the file through ACR a second time. I don't think re-opening the Smart Object will do anything more than you could have done the first time. I do it with a rendered TIFF, and have an intricate set of actions that I run in the Image Processor Pro. It's a mess, and you don't want to know.
The frustrating part is how to action ACR. I just can't figure it out. It'll work, and then I have to change some setting and the action stops working. I suspect you need a script, but so far I haven't found any.
So I've come to a compromise: I first process to TIFF in a temp folder, then I bulk open them in ACR to sharpen, then a second process to finish up.
For less critical files I have a sharpening action that comes close, involving edge masks and blend ifs, using smart sharpen which tends to preserve edges better than unsharp mask, and with less accumulation of noise.
Bottom line: I'm also very interested in further comments to this. BTW, I recently bought Lightroom 4, so maybe there is a posibility using that in a mixed workflow.

I just did the photoshop camera raw update and now everytime I try to do a text box or change the text the whole program crashes.

I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.

All fixed!!! My Aperture wasn't being recognized because it was in a folder. OK, now I can use my camera with Aperture.

Where is the camera raw folder of lightroom in mac

I'm looking Camera raw folder for lightroom
The only folder that i found is camera raw folder that work with photoshop

Uh, there is no Camera Raw folder in Lightroom. The ACR processing pipeline is encoded insider of LR. There is no separate plug-in in involved. ACR is a lug-in for Photoshop/ Lightroom is a separate application with the ACR code built in. It would be useful if you stated the actual versions of ACR and LR that you are asking about...

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

Pls help. My Camera Raw, CS6 and Lightroom won't read the NEF files from D610.

I recently upgraded to Nikon D610 and the NEF files were not readable from my old version of Camera Raw, CS6 and Lightroom. So downloaded the recommended upgrades and I now have Camera Raw 8.4.0.199; Lightroom 5.3; CS6 13.01. But still did not read my D610 NEF's. Please help. Thanks.

oh wait, i got it. Just in case for those who will have the same scenario. I downloaded the NEF files from my D610 using the old ViewNX 2.1 software and that was the cause of incompatibility. So i upgraded my ViewNX to 2.9 and downloaded my images again. And it worked this time.

Adobe Photoshop Elements 9.0.3 Update There was an error downloading this update. Please quit and try again later. Photoshop Camera Raw 6.5 Update There was an error downloading this update. Please quit and try again later.

Adobe Photoshop Elements 9.0.3 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.5 Update
There was an error downloading this update. Please quit and try again later.

Hi,
Which operating system are you running on?
For PSE 9, the update process was best using a manual method.
Are you trying to do Help - Updates?
If so try these downloads (fand follow the manual instructions given on the pages.
Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update
Adobe - Photoshop Elements : For Windows : Camera Raw 6.5 update for Elements 9
Adobe - Photoshop Elements : For Macintosh : Adobe Photoshop Elements 9.0.3 update
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.5 update for Elements 9
If you are getting an error during the download please try a different browser.
Brian

I accidentally deleted a folder of music from iTunes. I have Match, and now it seems deleted from all my devices. How can I get it back?

I accidentally deleted a folder of music from iTunes. I have Match, and now it seems deleted from all my devices. How can I get it back?

Were you in iTunes or the Finder? If you were in iTunes what exactly did you click? You say "a folder" but the only "folders" in iTunes contain Playlists and deleting a playlist will not delete tracks from the iTunes library.
When you deleted the music were you prompted to delete the tracks from the cloud? If so, did you do so?
Were you prompted to move the files to the Trash. If so did you do so? If you did have you emptied the Trash?

I accidentally highlighted my camera raw folder and it's contents in my library on my Mac. Please help me get it back.

Similar Messages

Maybe you are looking for