I accidently clicked dont restore session, I wanted to restore ... is there a way to do this after clicking no?

I accidentally clicked don't restore session ...
I wanted to restore, and actually needed a couple of the sites that i had open.
Is there any way to restore now? I found the sessionstore.js file ... can i do anything with that?
== This happened ==
Just once or twice

Did you also find a file sessionstore.bak from around that time?
If that is the case then make a backup copy of sessionstore.bak elsewhere and copy sessionstore.bak to sessionstore.js

Similar Messages

  • HT4718 I have bought a used mac air 2  which is now running windows .Who ever installed it has given all of the drive capacity over to boot camp.I now want to restore lio but want to know if there isa way of keeping windows as a dual boot .

    Hi. i have bought a two month old Mac air book 11.6 with 64 gb ssd .The previous owner installed windows and I want to reinstall Lion.Is there a way to do this and keep windows as a dual boot system.If so what size partition is best for windows..I am new to apples having always had PC,s .When the previos owner istalled windows he made the whole drive something called bootcamp.Help!! Roy

    Before you do anything else, I would make a copy of the Windows system on to an external hard disk.  Carbon Copy Cloner (CCC) will help you do this.
    Bootcamp partition needs to be set up using Bootcamp Assistant, from within Lion. There are sometimes problems using third party disk management apps, and the partition order is important too.
    I suspect the previous owner should have re-installed his original OS before giving you the computer. Are you saying that there is no Lion on it at present? If so, you will need to get it, or if it was Snow Leopard, the installation disk, from him.   In the latter case, with SL 10.6.8 installed, you can then access MAS to buy Lion.
    Once you have Lion installed you can setup Bootcamp and restore your Windows system to it, from the external disk.

  • HT1339 Hi i have an I pod and i had used it as hard disk also. Now when ever i connect it with my Laptop it shows restore to factory setting....i wanted to knwo is there any way i can save the data which i had already stored in the I pod

    Hi i have an I pod and i had used it as hard disk also. Now when ever i connect it with my Laptop it shows restore to factory setting....i wanted to knwo is there any way i can save the data which i had already stored in the I pod. I dont want to loose that data???

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • I forgot my passcode and i don't want to update my phone to restore, i just want a restore not a update and restore :(

    I forgot my passcode and in order to reset my phone to the original phone, i need to UPDATE AND RESTORE, and i dont want to update and restore, I JUST WANT TO Restore.. i cant download any huge files, my internet is bad and :/

    only way is to restore to last back up
    if there are non or if it does not work only way is to restore to factory settings

  • HELP! I dont like the new ios 7 update, i want the old one back, is there any way to do this?

    HELP! I dont like the new ios 7 update, i want the old one back, is there any way to do this?

    I really doubt it. 

  • I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide.  Is there a way to set up these 2 functions together?

    I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide.  Is there a way to set up these 2 functions together?

    I don't like that approach for adult learners, cannot refrain from mentioning that.
    Don't use a playbar but create custom navigation. You'll need a next button on each slide that appears after the audio (in timeline). Since slides will not all have the same duration you'll need an individual button per slide, a shape button on master slide or timed for the rest of the project will not be possible.

  • I accidently deleted all my photos on my iPad. Is there any way to restore them?

    I accidently deleted all my photos on m iPad. Is there a way to restore them?

    Hi Debbie
    It seems there is a way to restore them...  I lost all my photos recently and after a few days of searching I found this (thank god!)
    http://www.recovermy.co.uk/photos_on_ipad.html
    Hope it can help you too..
    Emms x

  • I was updating to IOS 8 thru iTunes on my 4S and it came unplugged. Now it wants me to restore settings. Is there a way to undo this and get 'old' phone back with all of my info/pics/contacts/etc?

    I was updating to the IOS 8 thru ITunes on my 4S when it came unplugged from the computer (dumb dog). Now the phone just has an image of plugging in to the ITunes icon and when I plug it in it says its in recovery mode and needs to be restored to original settings and I will lose all of my contacts/photos/etc. Is there a way to reverse this and just get my 'old' phone back with all of my stuff? I only have the free ICloud storage so I know most of my stuff will be lost. Yes I know..,hindsight is 20/20 on buying the backup. Help please!

    In short. No, you cannot unsync.  If you had a back up from your old iPhone you cand restore from a back up.
    In iTunes go to Edit > Preferences > Devices > and select the latest back up. 
    Before you synced your phone did you have it set up with the PhotoStream or iCloud? The pictures would be saved there.  Or if you had them sync to a file on your computer.

  • I accidently cleared my App folder from the dock. Is there a way to get it back on there?

    I accidently cleared my App folder from the dock. Is there a way to get it back on there?

    Andrew,
    Another way to say what Niel has said is to find the folder in the Finder.  Click on the hard drive icon on the desktop.  Since Applications starts with an A, it should be near the top of the window.  Click and drag the Applications folder icon over to the position in the Dock where you want the icon to appear.  Release the mouse button and you should have a shortcut to the Apps folder back in your Dock.
    Ji~m

  • I want to put my iTunes library on an external hard drive but leave my favourite songs on the computer to access without the external hard drive and when using iMovie. Is there a way to do this?

    I have filled my hard drive, half with music, half with photos. I want to take my music off, and put it onto an external hard drive. However, I would still like to have access to favourite songs and playlists when the external hard drive isn't plugged in. I would also like to access this music to use with iMovie. Is there a way to do this?

    You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all.  It also won't be easy when the time comes to relocate it all to different drives.
    You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library.  Next read about how to selectively consolidate items to the external drive.
    Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
    "...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
    Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links.  If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
    If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences.  Changing media folder preferences only applies to new files added, not old ones.
    Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this

    I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this ?! Please help !!!!

    Could you be more specific about what exactly do you want to fix now?

  • HT1414 I dont know why bt ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with my any sim card, so is there any way to fix this. Im from India

    I dont know why but ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with any sim, so is there any way to fix this please? Is there a solution to activating my Iphone 3gs on this firmware? I purchase this iPhone from USA and Im using it in India. Please help me...

    This means the iPhone was hacked to be unlocked. The 3GS was not sold in the US as officially unlocked.
    Restoring an iPhone with iTunes that was hacked to be unlocked or installing a firmware update on an iPhone that was hacked to be unlocked re-locks the iPhone to the carrier the iPhone was sold as carrier locked when new. In this case, re-locked with ATT.

  • Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails?

    Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails? Please help. Thanks!

    That exclamation mark is displayed when iPhoto cannot link to the original file.  First make sure you are running a "managed" library by checking iPhoto's Advanced preference pane to make sure the checkbox to copy files into the library during import is checked.
    Click to view full size
    If it is checked you can try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Undo/redo generate 'Save Changes to filename' pop up after 3 or 4 clicks.  Is there a way to turn this off?

    Running into issue with undo/redo(ctrl-z,ctrl-y) generating 'Save Changes to filename' pop up after 3 or 4 clicks.  Is there a way to turn this off?

    Sounds like some strange shortcut key conflict.
    The first thing to try is Deleting Corrupted Cache in DW.  Be sure hidden files & folders are enabled in Windows Explorer.
    http://forums.adobe.com/thread/494811
    If that doesn't help, try Restore Preferences
    http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    Nancy O.

  • HT1918 I want to change my Apple ID to what I have as my rescue ID. The system will not let me.Is there a way to do this?

    I want to change my Apple ID to what I have as my rescue ID. The system will not let me.Is there a way to do this?

    You'll need to change/remove your rescue email address first :
       1.    Navigate to appleid.apple.com using your web browser.
        2.    Click "Manage your account"
        3.    When prompted, sign in using your Apple ID and password.
        4.    Click Password & Security
        5.    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
        6.    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
        7.    Once you've finished editing your rescue email address, click the Save button directly below the email field.

Maybe you are looking for

  • Windows 7 Pro - 64bit with P43-C51

    Hello there, I am trying to install Windows 7 Pro - 64bit with my P43-C51. But after clicking: "Install" an error-message occurs saying: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk CD, DVD, or USB flash drive p

  • How does a standalone program running in JDeveloper connects to Oracle

    Hi, Can anybody please answer me how does a standalone program running in JDeveloper10G is getting connected to Oracle ? Normally it should go and check the host address and DB service name in TNSNames.ora file and go ahead. With JDeveloper10 ever af

  • ACE 4710 Redirect to Different Server Farm based on URL

    I have a weblogic 11 serverfarm where i want to redirect to a different serverfarm based on the URL. I am able to do it and it appears to be working however I am having issues with the cookies. I seem to be getting logged out of our App when switchin

  • GR for Purchase order and GI for prod. order simultaneously

    Hi Guys, My client current has an external system, which does both GR for puchase order and GI for Prod. order at the same time. He is now migrating into SAP and he wants the same functionality. Do you have any idea how to do this. For eg., Pick list

  • Dmg file not working

    i tried downloading a dmg file on my imac and it says the following disk images couldnt be opened not recognized i need help now