I Activate business content data source, but ca't able to see the data in

I activate business content data source in crm 2007 , when i go to RSA3, GIVE the data source and checking data, I can not able to find the data in that ,
q1) when activating the data souce then it have data i, OR we will run any sttings for that

Thanks for reply
I did same thing , I activated the data source in RSA5, then got to RSA3 i can not able to fine data in that data source,
is there is no data in tables?
or any other problem

Similar Messages

I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b

i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
what would be the cause

Hi,
I guess you mean the target table in BW, correct?
First replicate your DSource in BW
Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
You should now see the field in your PSA table.
hope this helps...
Olivier.

When we are able to see the data in Tcode RSA3(Source system)

Hi,
Please help me!
In enhancement after doing the R/3 stuff, when we are able to see the data in Tcode RSA3 in R/3 only?
Give the detail for all types of data source and for all types of loads.
eg: Std data source for deltaload, Generic data source for full load.....etc...
Regards,
Shiva.

Sure...
I am doing enhancement for datasource '2LIS_05_QVUDN'.
I complited the R/3 stuff and check the data for enhanced fields in RSA3...it's giving run timeout run time error.
Then I just ignore that error and I complited BW stuff successfully....after compliting BW stuff I am able to see the data in RSA3 in R/3.
So my question is, What is the root cause for this....?
When we are able to see the data in RSA3 in source system.?
please give me details for all types of datasource and all types of loads so that it will helps a lot for me in future.

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

How to view .shtml files locally? I have added "Open in Browser" but still not able to see the local .shtml file.

I have added Open in browser add ons in Firefox browser, but still not able to see the .shtml files on local machine.
Can any one please tell me how to view .shtml files in Firefox?

SHTML files are regular HTML files that make use of Server-Side Includes. In some server configurations, the special file extension is required to instruct the server to parse the file for SSI code.
If Firefox doesn't recognize the file type, it is likely the MIME type is incorrect.
Try this Addons
*https://addons.mozilla.org/en-US/firefox/addon/open-in-browser/

Is there a way to keep the screen from lighting up every time an email comes in, but still be able to see the email on the lock screen when you press the home button?

Is there a way to keep the screen from lighting up everytime an email comes in, but still be able to see the email on the lock screen when you press the home button? This is killing my battery, but also is kinda the whole point of the notification center in my mind.

This is something I've been wondering. I am a bit like you, I like being able to have a glance at emails or Facebook updates without having to log in, and I think it would be great to be able to turn off the notification switching the screen on, especially for emails as I do get a lot, and Facebook, but I somehow doubt it is possible.
I am currently monitoring how much this eats up my battery charge. On a normal day, after an overnight charge, I would probably still have 30%-40% left when I leave work in the evening. Today, I was down to 48% by lunchtime, where I've usually got a good 60-70% left... Might have to turn email notifications off on lock screen until it's possible to have them appearing in the list without flashing me...

Problem in Compresses file.Not able to see the data in file

Hi All,
I am downloading file into application server.
Using:
OPEN DATASET file FOR OUTPUT FILTER 'compress'.
OR
DATA: l_command(100) type c.
   CONCATENATE 'compress ' p_file INTO lw_command SEPARATED BY space.
    ENDIF.
    CALL 'SYSTEM' ID 'COMMAND' FIELD lw_command.
When I see the file content it contains junk characters.
If I want to see the data Do I need to uncompress the file.
con't we see the data without uncompressing the file?.
Regards,
vinod

Hi,
Uncompress is required to read the content of an Compressed file.
OPEN DATASET DSN FOR OUTPUT FILTER 'compress'.
OPEN DATASET DSN FOR INPUT FILTER 'uncompress'.
The first OPEN statement opens the file so that the displayed data can be read into it in compressed form.
The second OPEN statement opens the file so that the data is decompressed when it is read from the file.
http://www.sapnet.ru/abap_docu/ABAPOPEN_DATASET.htm#&ABAP_ADDITION_8@14@

Am I able to see the date/time an app was installed or deleted? I know your able to see purchased apps but what about free app info?

Ok, so I know if you go into Itunes and go to purchase history/ apps you can see the apps that have been downloaded in the past. What I want to know is if there is a way I can see the exact date/time the apps were downloaded/deleted.

Why can you not buy from the ipod?
What happens when you try?
Error message?
What does it say?
Any info?

Data blocks in forms 6i, can not see the data

i have built an application in forms with some data blocks. the blocks a connect to some tables in the db. i have built them connectd as "system". but when i run the applicatio as user x i can do select, insert, update, delete, but i can not se the records in the datablocks (they are empty), but i can do all transactios. why?

First of all, developing from the System schema is not a good idea.
Who owns the tables your form is connecting to? The table owner should create a public synonym for each table name, and also needs to grant user x access to the table.

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Could not see the data in the report

Hi,
BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
when I am logging in another machine i am able to see the data.Please help me in solving this issue.
Thanks in Advance.
Regards,
Spandana.

Spandana,
As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
Hope it should solves the issue.
If you want to see the data:(now with yellow & blue)
Select Column == properties == Read cell content as, change it to HTML.
Thank You!!
Sent from iPhone

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

I Activate business content data source, but ca't able to see the data in

Similar Messages

Maybe you are looking for