I added a music to a clip in IMovie but it has no sound?

No matter how many times I make the volume to 100%, the music has no sound but there is a green bar with the title of the song under the clips. When I tried the song with another clip that has louder sound (the clip after the red line), it works,but when I put the song on the clips before the red line (which don't have a loud sound) it has no music. This is annoying since I'm planning to put the music on muted clips. I don't know why is this happening.

Hi parchedmichael,
If you are having issues with a puchased movie, you may want to try deleting and redownloading the file to see if it resolves the issue. You may find the following article helpful:
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
- Brenden

Similar Messages

  • How do i add music to a clip on imovie 10.0.1

    i just need to know how to add sounds or music to a clip, that's it

    The Manual says…………
    http://help.apple.com/imovie/mac/10.0/?lang=en#mov515f7a531

  • Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?, Facebook has challenged the copyright of a movie using iMovie audio

    Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?

    Just curious as to why it's coming up as a copyright violation?
    Hard to say.  I think FaceBook errs on the side of abundance caution when they detect anything that sounds like music.
    It's also possible to that people use samples of various pieces of iLife audio contest to create a piece of work that they then copyright.
    Matt

  • I created my first movie using one long video (all photos) clip created in Keynote and imported to Imovie.  I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original but retain the audio. Can I?

    I created my first movie using one long video (a montage of photos) clip created in Keynote and imported to Imovie.  I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original video, but retain the audio. Can I?  And if so, how.  I cant seem to
    find the info anywhere in help.

    I would suggest that you go to iMovie/Preferences and make sure that Advanced Tools are enabled.
    Then, you can drag your new video clip on top of your old clip and a popup menu should appear. Choose REPLACE.

  • I added background music to the video clip, but I only hear noise, no video clip audio or the background music audio

    I added background music to the video clip in iMovie, the playback runs ok on the right corner preview screen, if I share it to movie clip or itunes or theather, I only hear noise, no video clip audio or the music audio
    If I don't put additional audio to the clip. audio effect or music background, the video plays normally
    I detached the audio from the video clip and deleted it, that way it was possible to listen to the music background and see the actual video clip, but no audio from the video clip.
    How can I have both?

    Hi
    My first thought is -
    Where are the original Audio file ?
    If it was on an Audio-CD then the CD is Ejected and one tries to play the movie - it can not find it = Silence.
    You are using an Non-Destructive Video editor - meaning that You have raw material - Video, Audio and photos but no Movie in Project - only a text document directing How You want it to be played. So if Audio is not where it was when this document were created - iMovie can not find it and e.g. audio goes silent.
    Yours thinking - Bengt W

  • Lost sound in some film clips when finishing project.  Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie.  Beginning clips ok. How do I restore sound? Thx.

    Lost sound in some film clips when finishing project.  Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie.  Beginning clips ok. How do I restore sound? Thx.

    Everything in your project will be exported when you use the share menu.
    If you want to export only half, I suggest that you
    1) Select the project in the Project Library.
    2) Click FILE/DUPLICATE PROJECT
    3) Give the duplicate a name, like Project A snippet.
    4) Open the duplicate project in the Project editor and delete the segments that you do not need.
    5) Then Share.
    You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
    You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

  • How do I add multiple background music clips to iMovie

    Trying to add multiple background music to iPhoto clips to make a vacation iMovie but when I add a music clip, it shoots right to beginning rather than stopping at the end of last clip added. I've pinned my background music to the first clips but want to add more background music but can't make it stop at the right photo clip. How do I place new background music at the right clip?

    I don't use iPhoto (but read your post since it mentioned iMovie which I do use) - anyway, you're not talking about the application iMovie - you're talking about a movie.
    So I am guessing, but it may work the same as it would with iMovie:
    Can you select the audo clip and  simply drag it to the spot you want it to start? Or, mocw the playhead to the spot where you want it to start then import it?
    FYI, it would be helpful to indicate which Mac OS version  you are running - it is not iOS 6 which is for iDevices.

  • I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?

    I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?am in

    In Finder you will find the voiceover in the project's package contents folder. If on your internal drive, the project will be in your User (Home) folder Movies/iMovie projects. If on an external drive it will be in the iMovie Projects folder at the top (root) level of the drive.
    Right-click (or Control-click) on the project name and select Show Package Contents from the pop-up menu. There should be a file named something like Voiceover Recording.caf in the package contents folder. Copy and paste this .caf file to the Desktop. See if it will open in QuickTime, GarageBand or another program capable of editing audio, such as MPEG Streamclip or Audacity (both free). If it will open, save (export) it in a different format, such as AIFF, preferably to a location where it will not be moved, such as iTunes.
    Now drag that file into iMovie to the desired position (if in iTunes drag from iMovie's music browser panel). Hopefully it will now play correctly.
    John
    Message was edited by: John Cogdell

  • Various problems with adding/deleting music on pho...

    I have a Lumia 620 and I think it's a wonderful phone, but putting music on it and removing it cleanly is such a hassle! I've never known a phone like it!
    I removed my SD card and put music on it when I first got it, everything was fine. But when I took it back out to delete everything and put new music on it, I found that the old music (even though it wasn't on the card) was still visible in the music library as well as the new.
    I searched the web and decided to format my card, I did that and everything was fine. But I also decided to try transfer my music via Nokia Music Player (beats having to remove my phone from the clip on case and removing the back to get to the card every time).
    So I started adding my music when I get a message saying my storage space is low... it's added it to my phone storage and not my card storage, even though in the settings I put add new music to SD card. So I deleted the music from Nokia Music Player hoping to remove it from my phone storage but no such luck.
    Not only have I got music listed in my library that isn't actually there, but it made duplicates too!
    What can I do to remove these empty files from my phone? Preferrably without having to go back to it's factory state. And is there program that works well with transferring music to my phone and onto the SD card?
    Any help will be appreciated SO much! This whole situation is really starting to annoy me now.

    Hi,
    Welcome to the forum!
    You don't need to take out the memory card on your phone just to transfer your preferred songs. You just need to connect your phone to your computer and do the steps from this link. This is the proper way of syncing or transferring music to your phone:
    http://www.windowsphone.com/en-US/how-to/wp8/music/sync-music-ringtones-and-podcasts-using-my-comput...
    Whenever you're going to save a music to your phone, make sure to check the phone storage settings. To do this, go to Settings > Phone storage > Store new music+videos on > select SD Card.
    If the phone prompted that the storage is very low, you can clean up Internet Explorer's temporary files, unnecessary Maps data and satellite images as well as Office documents from under each application's entry under Settings > Applications (swipe sideways to get the applications menu).
    Internet Explorer > delete history
    Maps  > download Maps > long-press an individual map to get an option to remove it, or delete all maps.
    Office  > reset Office to remove all downloaded content.
    Hope this helps. 

  • On my Mac Pro, when I send emails, it always gives me the option of adding an attachment with a paper clip. Today, the paperclip has vanished. What do I do ?

    On my Mac Pro, when I send emails, it always gives me the option of adding an attachment with a paper clip.
    Today, the paperclip has vanished. What do I do ?
    Simon

    http://www.apple.com/support/mail

  • I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

    I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

    What happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

  • I transferred my iTunes library from one external hard drive to another and added more music on the same day. How do I get rid of my duplicate files without going through them one by one which would take forever?

    Please help. I have transferred my iTunes library from one external hard drive to another plus added additional music now I have duplicates of the same music in many albums. How do I delete the duplicates without going through them one by one which would take forever? I understand how to get the "show exact duplicate" feature up on iTunes but, because they were added to the library on the exact day I can't seperate them I'm that manner. So each duplicate is right next to eachother in the exact duplicate screen.

    My DeDuper script is designed to help clean up. See this thread for background.
    tt2

  • My ipod nano was synced by itunes and removed all of my music and game files. I am in the process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

    My ipod nano was synced by itunes and removed all of my music and game files, and replaced my music with my kids music that they have put into the current itunes library. My music is nowhere to be found on my computer, so now  I am in the long, forever process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

    Contact iTunes support and explain your situation to them.  They may let you redownload it at no cost.
    http://www.apple.com/support/itunes/contact.html
    If they don't, I'm afraid you'll have to purchase it again.  Sorry.
    B-rock

  • Any fix for random art and song order problems after adding new music?

    If I sync my touch with itunes as a restore, all cover art, albums and playlists are correct. Once I add anything new or make a change and re-sync, random cover art is missing and random songs are in the wrong order. The only way to fix the problems is through a complete restore. Has anyone else had this problem or figured out a fix? I am using the latest itunes on a PC with XP.

    A few issues, but sorry let me try to understand.
    Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
    started skipping songs  - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
    As for item 2, you can try Hard Reset if you like to download MP3 validator.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

    I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.  everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

    Try Mixing Down the audio before export.
    This info may help;
    https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
    Also serch this forum for Mix Down you should find lots of info.
    Al

Maybe you are looking for

  • HT1692 can't sync iphone with yahoo verizon email calendar

    Hi everyone.  I have a verizon email account.  My contacts and email sync fine with my ipad and iphone.  I have never been able to sync my calendar.  I have tried all of the suggestions I have read online!  Nothing works.  Any ideas are greatly appre

  • Keyboard in a Windows boot partition.

    I have a windows boot partition.  Can I use my wireless keyboard in this environment?  Is there a place to download drivers or whatever?  Alternatively, is there a USB keyboard or whatever I can buy to work with my iMac in this partition environment?

  • Insatance on another OS version

    Hi, Im using the instance R12.0.0. with database 10.2.0.2. and another instance 11.5.10.2 with database 9i. We using this instances as single node.... And the OS is RHEL version 4 update 2. Question 1: Now is it possible to move these instances to sa

  • TACACS auth and RADIUS accounting with ACS

    I am having RADIUS accounting issues with an ASA 5520 that uses TACACS for authentication. Both are hosted on the same ACS server. I can send RADIUS info to my Microsoft IAS box but get Syslog ID 113022 errors when trying to send to the ACS RADIUS. A

  • Converting AVCHD 1920 x 1080i projects to HD MOV

    I am using Premiere Pro CS4 on a PC. I have a project that is composed of AVCHD MTS files (1920x1290 60i 29.97 fps, upper field first). If I export to an MP4 using the H.264 codec everything is fine. If I export to an MOV then the frame rate stutters