I ahve a ipod touch of first generation model no.=MC540ll and i want to update my IOS of my ipod to 6.1.5 it requires 2 GB to start i want to know that after instillation the memory will be reduced or not?
I ahve a ipod touch of first generation model no.=MC540ll and i want to update my IOS of my ipod to 6.1.5 it requires 2 GB to start i want to know that after instillation the memory will be reduced or not?
A model MC540ll is a 4G iPod and can go to iOS 6.1.5.
Updating via wifi (settings>General>Software Update requires about 2.4 GB of storage available. After the update all but maybe 50 MB will be returned to for use. iOS 6 takes up only a little more that iOS 5 but the excess storage space is needed to perform the update.
If you update via iTunes yo do not need exces storage space
Similar Messages
-
I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please
Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe -
Please help me...My ipod touch 4g is having trouble with the battery. My dad brought it in a Best Buy store. I use to charge it every night... Please help when ever i play a game after its fully charged after 3 minutes it says 20% battery remains, after 30 seconds it says 10% battery remains. please help me to fix it at no coast, because we are poor and on day my dad got me this ipod touch. i love it so much.... please help!!!!! please.............
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. If defect, within warranty (it should be because of when you purchased it), and not abused Apple will exchange it.
Apple Retail Store - Genius Bar -
IPod Touch 8gb First Generation Problem
Dear Apple Discussions:
I just recently acquired a iPod Touch 1st Generation from Ebay.com on May 3rd 2010. Here is the link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180501743808&ssPageName=STRK: MEWNX:IT ~~~>And it just arrived here today, 5/8/2010. My ultimate problem is that it won't turn on. I've tried the button "trick" but with no success. I've scanned the internet and nothing can be found. I'm not sure of its been Jailbroken. This is my first Apple iPod Touch. I also have a Apple iPod Nano 5th generation. The 5th generation iPod Nano from Apple.com is recognizable in iTunes but when I go to connect the iPod Touch 1st generation 8gb from Ebay.com it doesn't connect at all. The iPod Touch is completely unresponsive to anything that I do. Any help at all would be tremendously appreciated.
-Branden Hunter (ShadowKissedDhampir)What I mean't for the "button trick" was:
If you found your ipod touch is 'dead', ie won't turn on, holding the power button (top right on
Ipod) does nothing, your comp doesn't even recognise it, iTunes also - then you might need to do the following :
1) Start your iTunes and connect your iPod touch to your comp.
2) Keep holding the POWER button (top right) together with the HOME button (centre, bellow the ipod screen) for about 10 seconds. You should hear a sound(s)..
Release the POWER button ONLY, keep holding the HOME button, you will again hear some sounds.
3) If you did it correctly iTunes will tell you that it has detected an iPhone or iPod touch in recovery mode.
You should be able to re-sync all your previous ipod content from there...
Sorry, if this was already posted somewhere here, but I just recovered my ipod after searching the net, so wanted to share it..
I did donload and re-isntall the latest Itunes before I did the above, so try that if the above doesn't work the 1st time out..
Source:
http://en.kioskea.net/forum/affich-93387-my-ipod-won-t-turn-on
I think I'll try what you said now. Thanks much :)!~ Sincerely, Branden -
when I went to go update instagram it says "cannot download at this time" and it's been like this for days. when I hit the option 'done' it says it updated but it didn't. help????
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Store and sign out and sign back in
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings -
my Ipod Touch is a generation 3 with a camera and when i go into the settings to look for the Software Update bar i don't have one
If you have cameras then you have 4G iPod. To update connect to your computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
- A 4G to 6.1.5 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later -
I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.
-
when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
is there a way if apple can reset my ipod touch 2nd gen MC model back to 3.1.3? because iOS 4.2.1 is slow on my ipod and i cant deal with also i cannot afford a new ipod at the moment. also 3.1.3 was my default iOS when i first activated my ipod touch. I bought it in December in 2009
"You can restore to Factory Default which should go back to the original system"
This will not work..
A restore will always install the latest available software.
Again, there is NO legit way to go back at all. -
When I try to sync my iphone with itunes, it tells me a warning that I don't have enough memory and yet the status bar at the bottom says that I do and I know that I have enough memory. What's the problem? It happens with the ipods and ipad as well!!!
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!
You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock -
I need to know that Adobe Premier elements 12 will do the following; Allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback.
Is this possible?
Any input is appreciated! Thank you.Tom
Thanks for the reply.
Your thoughts on frame by frame viewing are can do. However, the real time playback feature includes the concept of rendering the Timeline, when the program indicates the need to do so, to get the best possible preview of what you are seeing in the Edit area monitor. That is a major novel in itself. Each time you do a new edit you will get the render indicator message to ignore or act on.
Definitely go the free 30 day tryout route for Premiere Elements 12. I have Premiere Elements 12 (updated to 12.1) and it runs fine on Windows 8.1 64 bit.
Best start with the Premiere Elements 12 Help PDF.
http://helpx.adobe.com/pdf/premiere-elements_reference.pdf
Also please review by blog posts Premiere Elements 12 First Look and Premiere Elements 12 Daily Discovery.
http://www.atr935.blogspot.com/2013/09/premiere-elements-12-first-look-details.html
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
When you get to the point of hand on with a mini test run project, I can offer to work with you through some specific workflow details in post exchanges in your thread(s). And we can sort out the can and cannot do.
ATR -
My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number? Or how can I find out who owns it?
No. Turn it into the military police.
Maybe you are looking for
-
Hi, I am using an HP Notebook (Product number: K8T57PA#ACJ). Please help me locate the HDMI driver for this notebook (OS = WINDOWS 8.1 64 BIT). Currently I am not able to connect the laptop to my TV using HDMI cable. Thanks! Upamanyu
-
Options opens in a tab instead of it's own window
When I click options in Firefox it used to open in a small, compact window of it's own, but for a long time now it opens in a new tab instead. I initially thought it had to do with an add-on I had installed and wasn't much bothered by it, but I've in
-
To everyone.. I. Need help..
-
Deleting a Deployed Categorization Schema
*Hello,* *I was wonder if anyone knows how to delete a categorization schema with deployed status? After playing in the IC web client it only appears draft categorization schema's can be deleted.* *Is there a way to delete deployed schema's in back e
-
I want to play podcast episodes just once
I recently bought an ipod shuffle 4th generation to listen to podcasts but i've noticed that when it finishes playing all the episodes of a given podcast in continuous order it goes back to the first episode and begins to play it again even thought i